antenna workspaces installation instructions - knoll 2.6.13... · antenna™ workspaces nstallation...

Antenna Workspaces™ Installation Instructions

Antenna™ Workspaces

Installation InstructionsJanuary 2013 2

Page Title



Page Title

Horizontal Rail Cradle (x4)

Worksurface (x1)

Cradle Clamp Bracket (x8)

Leg (x2)

Worksurface Spacer (x2)

Horizontal Rail (x2)

Horizontal Rail End Cap (x4)

A Screw (x8) B Screw (x16) C Screw (x8) D Screw (x2)

A Screw x8 B Screw x16 C Screw x8 D Screw x2

Horizontal RailCradle x4

Cradle ClampBracket x8

Worksurface Spacer x2 Horizontal RailEnd Capt x4

Worksurface x1

Horizontal Rail x2Leg x2





Worksurface x1






Worksurface x1






Worksurface x1






Worksurface x1






Worksurface x1






Worksurface x1






Worksurface x1






Worksurface x1

Horizontal Rail x2Leg x2 A Screw x8 B Screw x16 C Screw x8 D Screw x2




Worksurface x1






Worksurface x1


Installation Gauge



Step 1: Attach horizontal rail cradles to legs

Step 3: Using the installation gauge, position the desk end leg into the correct location in relation to the end of the rail.

Page Title


Step 2: Clamp horizontal rails into thehorizontal rail cradle with the cradle clampbrackets

A

B

Step 3: Insert horizontal rail end caps into theends of both horizontal rails


Step 2: Clamp horizontal rails into thehorizontal rail cradle with the cradle clampbrackets

A

B

Step 3: Insert horizontal rail end caps into theends of both horizontal rails

B Screws

A Screws

Step 4: Insert horizontal rail end caps into the ends of both horizontal rails.

Step 2: Clamp horizontal rails into the horizontal rail cradle with the cradle clamp brackets.



Step 5: Flip the base structure upside and place it on top of the upside down worksurface. Line up the screw holes in the worksurface this those in the horizontal rail cradle and attach the worksurface to the cradles.

Step 6: Insert the worksurface spacers midway along the rails and attach them to the worksurface.

Step 7: Flip the desk back over and use glides to level.

Page Title

Step 4: Flip the base structure upside andplace it on top of the upside downworksurface. Line up the screw holes in theworksurface this those in the horizontal railcradle and attach the worksurface to thecradles.

Step 5: Insert the worksurface spacersmidway along the rails and attach them to theworksurface.

C Screws D Screws



Round Table



Round Table




Worksurface Spacer x2

Worksurface x1






Worksurface x1






Worksurface x1


Worksurface x1

Horizontal Rail Cradle x4


Leg x2

Cradle Clamp Bracket x8

Horizontal Rail x2






Worksurface x1






Worksurface x1


3AB4069

7434100

Screw, SM, FLP 14 X 1 Type A CAD or Zinc

3AB4040

Screw, Mach, FLP 1/4-20 X 1



Round Table


Screw A

Step 2: Clamp horizontal rails into the horizontal rail cradle with thecradle clamp brackets

Screw B


Screw A

Step 2: Clamp horizontal rails into the horizontal rail cradle with thecradle clamp brackets

Screw B



A Screws

B Screws



Round Table

Step 3: Flip the base structure upside and place it on top of the upside down worksurface. Line up the screw holes in the worksurface to those in the horizontal rail cradle and attach the worksurface to the cradles.


Step 5: Flip over the desk, use glides to level.

C Screws

D Screws



Square Table



Worksurface x1



Leg x2


Horizontal Rail x2


Square Table

3AB4069

7434100


3AB4040






A Screws

B Screws

Square Table






C Screws

D Screws

Square Table



Track Table



Worksurface x1



Leg x2


Horizontal Rail x2

Worksurface Spacer x2 Horizontal Rail End Cap x4

Track Table

7434100


3AB4040






A Screws

B Screws

Track Table






C Screws

D Screws

Track Table



Desk With Suspended File



Worksurface x1


Suspended Storage Unit x1

A Screw x8

Storage Hanging Brackets x4

B Screw x16

E Screw x4

C Screw x8

F Set Screw x4

D Screw x2

Leg x2


Horizontal Rail x2

Worksurface Spacer x2 Horizontal Rail End Cap x4


7434100


3AB4040


3AB40633AB4063




Step 2: Slide hanging brackets for storage cabinet along rails into desired position and tighten screw E.

Step 3: Clamp horizontal rails into horizontal rail cradle with the cradle clamp brackets on one end.

A Screws

E Screws

B Screws

Hanging Bracket




Step 4: Slide hanging brackets for storage cabinet along rails into desired position and tighten screw E.

Step 5: Install remaining leg and cradle clamps to rails and insert horizontal rail end caps to both ends of horizontal rails.

Step 6: Before top is fastened to base assembly, use 4 set screws (F) to secure hanging brackets into position on rail.

E Screws

B Screws

F Set Screws

Horizontal Rail End Cap


antenna workspaces installation instructions - knoll 2.6.13... · antenna™ workspaces nstallation...

Documents