_antares 2.5 inch open hole tool catalogue-2014-2p-s

8/10/2019 _ANTARES 2.5 Inch Open Hole Tool Catalogue-2014-2p-s

1/16

www.antares-geo.de

2 " Open Hole Logging Instruments

Catalogue 2014ANTARES Datensysteme GmbH

T h e S HA R P

F a m i l y

S l i m H o l e A N

TA R E S R e s

e r v o i r P r o b e

s


2/16

For supplementary questions as well as quotation requests please contact :Datensysteme GmbH

Rudolf-Diesel-Str. 6

28816 StuhrGermanyPhone: +49 (0) 421 87194-0Fax: +49 (0) 421 87194-25Email: [email protected]: www.antares-geo.de

ANTARES

The specifications contained in this document can be modified without previousannouncement. No part of this document may be duplicated or transmitted without explicitwritten permission of ANTARES Datensysteme GmbH.

(C) 1997-2014 ANTARES Datensysteme GmbH. All rights reserved


3/16

DearProspectiveClient

Im very happy to present to you our new 2 tool string. Many of ourcustomers were askingus for suitable tools for a 4borehole, sowestarteddeveloping SHARP (Slim Hole ANTARES Reservoir Probes). It is as flexibleand reliable as the 3 / tool string and runs under the same surfacesystem.

For the various applications of our clients, ANTARES offers three differentratingsof theinstruments:

175Deg.C(350Deg.F)and140MPa(20,000psi)150Deg.C(300Deg.F)and100MPa(14,000psi)100Deg.C(212Deg.F)and 35MPa(5,800psi)

SHARP is an example of our close collaboration with our customers whichhas been key to expanding our business over the last 20 years whenANTARES has grown from a single small office in Germany to aninternational company. Today we have offices in Houston, Moscow and AbuDhabi serving customers in over 30 countries. Our clients see ANTARES asa partner not only for leading edge technology but also for training,maintenance andResearch& Development.

Our customers appreciate the individual and comprehensive supportprovided by ANTARES and the reliability of the tools and surface system.The combinability of our instruments helps them to reduce rig timedramatically. ANTARES tools are accepted by State & International OilCompanies because theresponseandtheaccuracy of thetools provide logscomparable to those of major service companies, as demonstrated in testruns.

Therefore please see our new 2 catalogue featuring SHARP loggingtools.Togetherwithmyteam,Ihopewewillbecomepartnersinthefuture.Discover theMade in Germanydifference!

ConradBlumhagen

BusinessDevelopment DirectorANTARESDatensystemeGmbH

3 8

ANTARES 2014 1


4/16

2 / " Product Line1 2

New ! Quad Combo2 / "SHARP Instruments

1 2

GRSGR

Density

NeutronResistivity

Standard RatingTemperature 175C

Pressure 140 MPa

AcousticCaliper

ANTARES 2014 2


5/16

Specifications

Logging parameters

Combinability

With ANTARES SHARP family of 2 " open hole tools.

Diameter: 63.5

Weight: 22 kg (48.5 lbs)

mm (2.5")Length: 1,080 mm (42.5")

Max. Temp: 175C (350F)Max. Pressure: 140 MPa (20,000 psi)

Top Connector: ANTARESBottom Connector: ANTARES Toolbus

GR NaI scintillation crystalCCL coil and magnet

Measure Points (from bottom):GR : 220 mm (8.7)CCL: 880 mm (34.6)

The ANTARES 0928 Digital Telemetry instrument handles the communication between the ALADINsurface system and ANTARES digital downhole instruments in both directions. It also monitors the

temperatureof thetelemetry electronics andthecableheadvoltage.Thetool includes a Gamma Rayscintillation detector,measuring the total gamma rays emitted by thesurrounding formation and a Casing Collar Locator. The Gamma Ray Log (GR) can be ran in open andcased holes, in all mud systems and in dry holes. For cased hole operations, a CCL is also part of thetool.

Displayed Standard Curves

GR in API Gamma Ray

CCL in mV Casing Collar LocatorCHV in V Cable Head VoltageTEMP in C Electronics Temperature

Measuring ParametersMeasuring Range: Accuracy*:

GR: 0 to 3000 gAPICCL: single casing string

GR: 5 % of measured values*+

Telemetry / GR / CCL

ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specificationsare subject to change without prior notice .

Recommended:Min. Hole Diameter:100 mm (4")Max Hole Diameter: NA

Recommended:Logging Speed GR: 9 m/min

(1800 ft/hour)Sample Rate: selectable

* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.On a log, these variations between other factors depend on logging speed and filter strength.


ANTARES 2014 3


6/16

Specifications

Logging Parameters


Combinability

GR in gAPI Gamma RadiationK in % Potassium ContentTh in ppm Thorium ContentU in ppm Uranium ContentK/Th Potassium plus Thorium ContentChiSqr Chi-Square - a measure for the quality of the spectrum Stripping

resultRThK Ration between Thorium and Potassium ContentRThU Ration between Thorium and Uranium ContentRUK Ration between Uranium and Potassium ContentFlaskTemp C / F Flask Temperature

RecommendedMin. Hole Diameter:100 mm (4)Max Hole Diameter:NA

RecommendedLogging Speed: 3-6 m/min

590 - 1200 ft/hrSample Rate: selectable

Measuring Range: Accuracy*:GR 0...3000 APiK 0...50 %U 0...500 ppmTh 0...500 ppm

GR 3 % of measuredvalues*+

+K, U, Th 4 % of measuredvalues*

Diameter: 63.5

Weight: 24 kg (53 lbs)

mm (2.5")Length: 1,700 mm (66.9)


Telemetry required: yesTop Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Detector Type: CsI scintillation crystal

Measure Point (from bottom):336 mm (13)

Spectrum: 0...3000 keV,256 Channels

The ANTARES 1484 Spectrum Gamma Ray (SGR) is an instrument logging the natural gammaradiation. The tool measures the entire gamma ray spectrum from 0 to 3000 keV. It records the total

amount of Gamma Rays and provides quantitative measurements of the Potassium, Thorium andUraniumcontentsof theformation.The Spectrum Gamma Ray Log can be run in open and cased holes with all mud systems and also indryboreholes.

40 232

238

Spectrum Gamma Ray


Measuring Parameters:



ANTARES 2014 4


7/16

Specifications

Logging parameters

Standard Displayed Curves

Combinability


CN in pu Uncorrected Porosity (1 pu = 1 %) in Limestone MatrixCNCM in pu CN Porosity, corrected for caliper, salinity, mud weight and

matrix

RecommendedMin. Hole Diameter: 100 mm (4)Max. Hole Diameter:380 mm (15)

RecommendedLogging Speed: 6 m/min

(1200 ft/hr)

Diameter: 63.5 mm (2.5")Length: 2,390 mm (94)Weight: 30 kg (66 lbs)


Telemetry required:0928Top Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Source Type: AmBeDetector Type: He-3Number of Detectors: 2

Measure Point (from bottom):CN: 1,257 mm (49.5)

241

The Compensated Neutron instrument works with an Americium Beryllium sourceandtwo detectors.Thesource emitshigh energyneutronswhichundergo scattering in theformation,

lose energyandproduce gammarays.Thethermal neutronsaremeasuredbythetwo detectors in thetool.The tool can be ran in both open and cased holes and in most types of mud. In order to minimize theboreholeeffects, thetoolis rundecentralized.

ANTARES 1483

Compensated Neutron


Measuring Range: Accuracy:+

0 - 100 pu7% of recorded value

(above 10 pu)

+ 1 pu (for 0-10 pu)Measuring Parameters


ANTARES 2014 5


8/16

Specifications

Logging parameters


Combinability


DNC in g/cm Caliper Corrected Bulk Density

COR in g/cm Density CorrectionPEC in B/e Caliper Corrected Photoelectric IndexCaliper in mm or in Borehole Diameter

3

3

RecommendedMin. Hole Diameter: 113 mm (4.5)Max Hole Diameter: 380 mm (15)

RecommendedLogging Speed: 6 m/min

(1200 ft/hr)

Diameter (max): 82 mm (3.25")Length: 3,590 mm (142)Weight: 55 kg (120 lbs)


Telemetry required: 0928 TelemetryTop Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Source Type:Detector Type: NaI Scintillation

Crystal

No of Detectors: 2Measure Points (from bottom):

DEN: 1,538 mm (42)Pe 1,371 mm (54)Caliper 1,538 mm (42)

137Cs

Pe Density


The ANTARES 1482 Pe Spectrum Density instrument includes a pad with a Cesium source emittinggamma rays and two detectors. From the energy spectrum and count rates of the two counters, the

boreholecompensatedformationbulkdensityanda photo electricabsorption index arecalculated.A caliper measurement is provided, permitting compensationforboreholeeffects.Thepaddevice toolcan be run in any mud except in barite mud, which absorbs the Gamma Rays and therefore affects thedensity readingheavily.A Correction Curve indicates theinfluenceof the boreholerugosity.

Measuring Range: Accuracy*:DEN: 1-3 g/cmPE: 0-10 B/e

Caliper: 100-380 mm (4-15)

DEN 0.02 g/cm(for 2 - 3 g/cm formation

density)

3 3

3

Measuring Parameters


ANTARES 2014 6


9/16

Diameter: 63.5


mm (2.5")Length: 3,940 mm (156)


Telemetry required:0928 TelemetryTop Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Transmitter Type: Ceramic, monopoleSensors: Ceramic Transducer

Array

Transmitter-Receiver Spacing:T1-R1 : 915 mm (3 ft)R1-R2: 610 mm (2 ft)T2-R2: 915 mm (3 ft)

Delta T Measure Point (from bottom):1,950 mm (77)

The ANTARES 1335 Borehole Compensated Acoustic instrument is designed for acquiring highresolution, full wave acoustic data. Two ceramic monopole transmitters emit the acoustic signal

which is recorded by two ceramic receivers. During one logging run, the formation travelling time inthe open hole interval and the cement bond log in the cased hole section can be recorded.The logrequiresafluidfilledboreholebutisindependentofthemudtype.

Specifications

Logging parameters


Combinability


Open Hole Cement Bond LogDT (s/m) Delta TimeRuntime T1R1 (s)Runtime T1R2 (s) Acoustic TravelRuntime T2R1 (s) TimesRuntime T2R1 (s)TTI Integrated TotalTimeTraceT1R1TraceT1R2 TraceTraceT2R1 informationTraceT2R2

SRTN (s) Single Receiver Travel,Time from near receiver

AmpN Amplitude of first arrivalfrom near receiver,measured at casing traveltime

Trace F (mV) Trace Information from FarReceiver.

BI Bond Index

RecommendedMin. Hole Diameter:100 mm (4)Max Hole Diameter:400 mm (16)

RecommendedLogging Speed: 6-15 m/min

1200- 3000 ft/hr

Compensated Acoustic / CBL


Measuring Range: Accuracy++

DT: 100-800 s/m(35-250 s/ft)

DT*: 3 s/m( 1s/ft)

borehole* centralized tool in a 100 mm diameter



ANTARES 2014 7


10/16

Specifications

Logging parameters


Combinability

With Antares SHARP family of 2 " open hole tools. Must be lowest tool in string.

RILD in Ohmm Deep Induction ResistivityRILM in Ohmm Medium Induction Resistivity

RecommendedMin. Hole Diameter:100 mm (4)Max Hole Diameter:250 mm (10)

RecommendedLogging speed: 25 m/min (5000 ft/h)

Diameter: 63.5


mm (2.5")Length: 2,120 mm (83.5")

Max. Temp: 150C (300F)

Max. Pressure: 100 MPa (15,000 psi)Telemetry required:0928 TelemetryTop Connector: ANTARES ToolbusBottom Connector: none

Transmitters: Multi Coil ArrayReceivers: Single Coil

Measure Points (from bottom):Deep: 680 mm (27)

Medium: 475 mm (19)

The ANTARES 1148 Dual Induction instrument presents deep and medium investigation inductionresistivitycurves calculated fromconductivitymeasuredbythetool.

Transmitter coils induce an electromagnetic field in and around the borehole. Variation in the field,detected by the receiver coils, corresponds to variations in the conductivity in the formation adjacenttothetool.Correctionsare applied to remove theboreholeeffects.The log is most suitable in high resistive mudsystems, e. g. oil based and freshwater, mud or air filledholes.

Measuring Range:CILD (Deep), CILM (Medium):

10 mS/m - 2000 mS/m (mmho)CILD (Deep), CILM (Medium):

10 mS/m (mmho): +/- 25%2000 mS/m (mmho): +/- 5%

Accurracy:Measuring Parameters

Dual Induction Log



ANTARES 2014 8


11/16

Specifications

Logging parameters


Combinability

RD or RDeep in Ohmm Deep ResistivityRS or RShallow in Ohmm Shallow ResistivitySP in mV Spontaneous Potential

RecommendedMin. Hole Diameter: 100 mm (4)Max. Hole Diameter: 250 mm (10)

RecommendedLogging Speed: 25 m/min*

(5000 ft/h)

* @ data spacing 100 mm (4)

Diameter: 63.5


mm (2.5")Length : 6900 mm (271")(w/ bot. elec)


Telemetry Required: 0928 TelemetryTop Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Sensor: Electrode Array

Measure Pointsfrom bottom, base config:

Rdeep, RShallow 3,990 mm (157")

on IsoSub below cableheadSP 12,900m (508")

The 1147 ANTARES Dual Laterolog instrument is designed to measure formation resistivities inboreholes with conductive mud systems. A f electrodes in the tool together with IsoSubs are

configured to achieve resistivity measurements with two different depths of investigation (Deep andShallow Laterolog resistivities).

n array o

The return electrodes are positioned far away from the emittingelectrodes in the toolstring to allow for deep penetration of the formation. No weak bridle is required.A Spontaneous Potential isalsomeasured.

Measuring Range: Accuracy:DLL 0 to 40,000 OhmmSP -1000 mV to 1000 mV

DLL: 5 %(between 0.2 and

2000 Ohmm)SP: 10 %

+

+



Dual Laterolog



ANTARES 2014 9


12/16

TheANTARES 1027 and1028 Caliper tools arenon motorized 3 arm instruments. Thecaliper signalsare generated by using high resolution precision magnetic sensors and cover a range between 100

and 330 mm (4 and 13 inch). The ANTARES 1027 tool can be run on its own as a 3 Arm Caliper or incombination(with60degreesoffset)withthe1028tooltobecomea6 ArmCaliper.

3-Arm Caliper / 6-Arm Caliper

ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason thespecifications are subject to change without prior notice .

Specifications

Logging parameters

Combinability


Diameter: 63.5


mm (2.5")Length: 1335 mm (52.5")


Top Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Sensors:

Measure Points (from bottom):529 mm (20.8)

Magneto ResistivityAngle Sensors

1027 3-Arm Caliper 1028 3-Arm CaliperRad1 in mm or in Radii 120 degRad3 in mm or inRad5 in mm or inCAL in mm or inch Caliper/calculated

borehole diameter

(average Rad1- 3 - 5)

Rad2 in mm or in Radii 120 degRad4 in mm or inRad6 in mm or inCAL in mm or inch Caliper/calculated

borehole diameter

(average Rad2- 4 - 6)

Measuring Range:Accuracy:100 - 330 mm

(3.94"-13") 1 % of Measured Value 5 mm (0.2")+CAL:

Recommended:Min. Hole Diameter: 100 mm (3.94")Max Hole Diameter: 330 mm (13")

Recommended:Logging Speed: max. 30 m/min

5900 ft/hrSample Rate: selectable


6-Arm-Caliper / Displayed Standard Curves

Measurement with both tools, 1027 3-Arm Caliper and 1028 3-Arm Caliper.

CAL14 in mm or in Caliper in 3 directions (120deg)CAL25 in mm or inCAL36 in mm or in

6-Arm CaliperDisplayed Standard Curves



ANTARES 2014 10


13/16

Specifications

Logging Parameters


CHT in kgf Cable Head TensionBHT in C/F Borehole TemperatureRMud in Ohmm Mud Resistivity

RecommendedMin. Hole Diameter: 100 mm (3.94)Max. Hole Diameter: NA

Diameter: 63.5 mm (2.5")Length: 1505 mm (59.25)Weight: 24 kg (90 lbs)


Telemetry required: yesTop Connector: ANTARES ToolbusBottom Connector: ANTARES Toolbus

Sensors: Strain GageMud ResistivityTemperature

Measure Points (from bottom):Tension: 968 mm (38.11)Mud Resistivity: 855 mm (33.66)

Temperature: 753 mm (29.65)

The ANTARES 1845 Downhole Tension and Mud Data Sub provides various information. It measuresthe tension andcompression at thecable head andit records continuously theborehole temperature

andmudresistivity.The sub can be run as part of every tool string and is placed just below the cable head and above theDigitalTelemetry.Itcanbeloggedinanykindofmudsystem.

Combinability

Measuring Range: Accuracy:Tension: Tension:+ + +90 kN ( 20,000 lbs)

Max. Load (Push/Pull)1 %

Temperature: -5 to 180C(23 to 356F)

Mud Resistivity: 0.01 to 20 Ohmm

Temperature: 1 % fsMud Resistivity: 5 %

++


ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason thespecifications are subject to change without prior notice .

Downhole Tension & Mud Data Sub



ANTARES 2014 11


14/16

ANTARES designs and develops to create advanced and reliable loggingequipment and to provide high quality API standard data. State-of-the-Art design tools such asAltium and Solid Works are used to design ANTARES sophisticated instruments. The companyemploys a team of Geophysicists, Programmers, Mathematicians and Mechanical and ElectronicEngineers for thedevelopmentof these products.

The customer finds in offering a comprehensive logging system ofdependable down-hole tools andeasy-to-usepanels andsoftware.Thedown-hole tools includeopen-hole and cased-hole instruments with diameters of 1 / , 2 and 3 / . ANTARES electrical andhydraulicwinchofferingsroundoutthesystemsolution.

Design and quality during manufacturing are crucial to ANTARES, consequently advanced inspectionand quality control procedures have been implemented throughout the engineering and manu-facturing process. Every manufactured product is subjected to a andmonitoring procedure, and logging tools are only approved for shipping after they have passed acomplexfinalcheckinourownNeutronAPIstandardtestpitortestwell.

ANTARES down-hole equipment is fully digital. This ensures a , reliable signaltransmission and .

ANTARES equipment hasbeen used successfully in deep andhotwells(8500 m, 250C) andalso at theoth

leading edge technology

ANTARES a one-stop-shop

multi-stage quality control

high data qualityveryefficientoperation

11 16 3 8

erextreme in theAntarctica,at temperatureswellbelowthefreezingpoint.

and finally


ANTARES 2014 12


15/16

One System - One Supplier - One Contact

www.antares-geo.de

Dontforgettovisitourwebsite.There, you will find several other products tocomplete your borehole logging equipment.



16/16

_antares 2.5 inch open hole tool catalogue-2014-2p-s

Documents