andy blue glasgow update. andy blue wp3 strip meeting environmental chamber installed into cleanroom...

7
Andy Blue Glasgow Update

Upload: brandon-robbins

Post on 19-Jan-2018

216 views

Category:

Documents


0 download

DESCRIPTION

Andy Blue WP3 Strip Meeting Remote Monitoring 4-20 mA (Current Loop) Sensor Board for Arduino Adruino Yun :built-in Ethernet and WiFi support Digital Vac/Pressure Gauge. Outputs 4-20mA indicating vac value Total Cost ~ £350 For reference, Cole Palmer sell similar system for about ~ £1.4k

TRANSCRIPT

Page 1: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy Blue

Glasgow Update

Page 2: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

Environmental Chamber

• Installed into cleanroom– Working on controlling scans via Ethernet connection– Independent monitoring of Temperature and Humidity

Page 3: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

Remote Monitoring

4-20 mA (Current Loop) Sensor Board for Arduino

Adruino Yun :built-in Ethernet and WiFi support

Digital Vac/Pressure Gauge. Outputs 4-20mA indicating vac value

Total Cost ~ £350For reference, Cole Palmer sell similar system for about ~ £1.4k

Page 4: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

UV Glue valve using ASYMTEK machine

DV-09 Needle ValveThe DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.

Size: 108 x 27 mm (4.25 x 1.06 in.)Weight: 170 gm (6 oz.)Fluid Inlet Thread: 1/8 NPT FemaleFluid Outlet Thread: Male luer lockFree -flow Area: 1.37 mm2 (.002 in.2)Maximum Fluid Pressure: 2067 kPa (300 psi) [21 bar]Air Pressure Required: 482 kPa (70 psi) [4.8 bar]Output Variation: ± 1.0% nominal (viscosity dependent)

Page 5: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

SCTDAQ

• Kenny at Glasgow working on Strip DAQ 1 day/week– Has began to get familiar with SCTDAQ– Looking at trim fitting code for ABC130 tests– Possibly modifying (speeding up) methods for fitting

– He is also working on multi module testing for pixels using the RCE + HSIO setup

Page 6: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

Diamond Testbeam

• Testbeam is from 14th -21st October– In line to test HR CMOS Strip samples

• As well as LGAD strip and HV-CMOS devices– Currently writing code to trigger to/from oscilloscope, beam and xy

stage to automate data taking

• Agilent Oscilloscope 9000A

• Running LabVIEW

• Data taking initiated by Trigger

• Works!

Page 7: Andy Blue Glasgow Update. Andy Blue WP3 Strip Meeting Environmental Chamber Installed into cleanroom Working on controlling scans via Ethernet connection

Andy BlueAndy Blue WP3 Strip Meeting

Diamond Testbeam

• Turned out 1st October was deadline for all diamond beam proposal for April – Sep 2015– Managed to submit one for ABC130 tests

• Have requested 5 days• Nearer the time we can maybe modify what we are testing• Will find out in a few months if proposal has been accepted