andritz pump solutions for mining of active mine / environmental by controlling the ground water...
TRANSCRIPT
Andritz for miningTailor-made pumping solutions
Advantages at a glance
� Deployment under
extreme conditions
� Highest operating reliability
� Long service life
� Maintenance-free
operation
� High-grade materials
Are you looking for safe and effective so-
lutions in mining water management?
ANDRITZ is one of the leading manufacturers
of pumps for water management and emer-
gency drainage in surface and underground
mining.
Safety and reliability are the greatest necessi-
ties in surface and underground mining in or-
der to ensure that there are no disruptions in
extraction. Mine operators around the world
trust the single-flow and double-suction
submersible motor pumps from ANDRITZ in
order to remove mine water reliably from op-
erating areas. If rescue pumps are needed to
drain water from mines reliably and quickly in
emergencies, the patented HDM technology
is the best possible solution to keep people
and the environment safe.
HdM – Heavy duty MiningTwo pumps are arranged one above the
other, running in counter direction and driv-
en by a continuous pump shaft. Splitting
the workload between both pumps ensures
complete axial thrust balancing and thus
contributes towards solving the problems
of force effects on the unit and loads on
the thrust bearings; at the same time, the
flow and suction speed outside the pump
is halved. Thus, well walls are protected
around the suction areas, and the intake of
abrasive particles is minimized. ANDRITZ
submersible motor pumps with HDM-Tech-
nology provide maximum operating reliabil-
ity, minimal wear, and long service life, which
can often be more than 20 years.
Further technologiesMST (Modular Shaft Technology) allows
easy adaptation to changing pumping
conditions.
MCT (Modular Cooling Technology) en-
hances durability, and is at the same time
the most efficient possible means of cool-
ing submersible motors.
IPM (Interior Permanent Magnet Motor)
the new premium class submersible mo-
tors with highest efficiencies over a wide
performance range.
For complete information on our tech-
nologies kindly refer to our brochures and
videos.
OP
EN
PIT
MIN
ES
AC
TIVE
MIN
E
GR
OU
ND
WATE
R LE
VE
L
DE
WATE
RIN
G FR
OM
EX-P
IT BO
RE
HO
LES
DE
WATE
RIN
G FR
OM
IN
-PIT B
OR
EH
OLE
S
UN
DE
RG
RO
UN
D M
INE
S
DE
WATE
RIN
G V
IAE
XTE
RN
AL B
OR
EH
OLE
S
PR
OTE
CTIO
N O
F A
CTIV
E M
INE
/E
NV
IRO
NM
EN
TAL
BY
CO
NTR
OLLIN
G
THE
GR
OU
ND
WATE
R
LEV
EL IN
CLO
SE
D M
INE
DE
WATE
RIN
G V
IA S
HA
FT AN
D FO
RR
ES
CU
E P
UR
PO
SE
S
CLO
SE
D M
INE
AC
TIVE
MIN
E
GR
OU
ND
WATE
R LE
VE
L
AD
VA
NTA
GE
S:
– No pum
p station– N
o flood protection
– No ad
ditional heat generation
Pump typesfor operation in mining
300 500 1000 2000 3000 6000
30
405060
80100
200
20
10
[m]
9 10 12 14 16 22 28 34
3000
1000
500
50
20
10
100
[kW]
[m]
5 10 20 50 100 500 1000
500
100
50
10
1000
200 500 1000 2000 5000
1000
500
300
200
[m]
[m]
3 10 20 50 100 200 500 900
800
500
100
50
300
20
200
30
[m³/h]
[m³/h]
[m³/h]
[m³/h]
[m³/h]
[inch]
� Flow rate up to 6,000 m3/h
� Head up to 1,500 m
� Pressure up to 150 bar
� Well diameter from 20“
� Temperature up to 75° C
Water-fi l led and water-cooled submersible motor. For consistently strong per-formance at high tempera-tures, special voltages and in extreme conditions. MCT- and IPM-Technology for per-fect cooling and highest ef-ficiencies.
� Power up to 5,000 kW
� Voltage up to 14,000 V
� Well diameter from 8“
� Temperature up to 75° C
� Highly wear-resistant single-stage centrifugal pumps
� Flow rate up to 6,000 m3/h
� Head up to 160 m
� Pressure up to 25 bar
� Efficiencies up to 80%Highly wear-resistant
centrifugal pumps
Single-stage centrifugal pumps with closed, semi-open, or open impeller also available in highly wear-resistant design. Various material combinations available for most varied ap-plications guarantee for long life cycles and outstanding efficiencies.
Mult i-stage, single-f low submersible motor pumps. Absolutely reliable, mainte-nance-free and extremely long-lasting. With MST-Technology the pump may not only be flexibly adapted to changing pumping condi-tions but is furthermore also saving storage costs.
� Flow rate up to 900 m3/h
� Head up to 800 m
� Pressure up to 100 bar
� Well diameter from 6“
� Temperature up to 75° C
Single-flow submersible motor pumps
Multi-stage high-pressure pumps in horizontal and ver-tical design. Manufactured in material variants of cast iron, bronze, aluminium-bronze or stainless steel.High-pressure pumps
� Flow rate up to 1,400 m3/h
� Head up to 1,000 m
� Pressure up to 100 bar
Double-flow submersible motor pumps
Submersible motors
Multi-stage, double-flow submersible motor pumps. Compensation of axial thrust and halved flow velocity guarantee for longest service life even under most extreme operation conditions.
All data, information, statements, photographs, and graphic illustrations in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of ANDRITZ AG or any affiliates for equipment and/or systems referred to herein. © ANDRITZ AG 2015. All rights reserved. No part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of ANDRITZ AG or its affiliates. Any such unauthorized use for any purpose is a violation of the relevant copyright laws. ANDRITZ AG, Stattegger Strasse 18, 8045 Graz, Austria.
www.andritz.com/pumps
HPU.min.01.en.01.15
ANDRITZ Ritz GmbHGueglingstrasse 5073529 Schwaebisch GmuendPhone: +49 (7171) 609 [email protected]
Close to our customersANDRITZ locations worldwide