Anderson Exxel MH-D2 CNC Router, Two 8'x10' Tables, Two 15HP HSK 63F Spindles, Two 20HP Vacuum Pumps, Only 300

Hours of Run Time, New in 2004 Machine Number: 16492

Used Andi Exxel Model MH-D2 CNC Router in Like New Condition New in 2004

10` X 8` Twin Moving tables,

(2) High Frequency Router Heads.

Heavy Duty stationary bridge

machine in a front-to back moving

table configuration each with

vacuum zones;

'Universal' type phenolic vacuum

plenum that can be gasketed into a

variety of zone configurations for

spoil board use, or used with pods;

Includes square pop-up pins around

the outside of the table

Equipped with: (2) 15 HP Liquid

cooled HSK-63F type ATC spindle

with traveling 16-station side mount

RAN/ROD tool changer

(2) Drill Blocks with 32 mm 5 x 5 vertical & horizontal drills and grooving saw.

X- & Y-Axis use a 'LINEAR MAGNETIC DRIVE SYSTEM'

All motion components are serviced by an automatic lubrication system

Max. rapid feed rates up to 4,000 IPM and cutting feed rates up to 2,362 IPM

FANUC '18I' CNC Control with: 9' CRT Screen, RS-232 & PCMCIA ports, M & G code programming in

inch or metric, fast corner function, 3-axis linear & circular interpolation, cutter compensation, and spindle

& feed rate override

2 Becker 15 kw (20hp) vacuum pumps

Haror hydraulic power unit

Chiller unit

575/3/60

Location: Central Canada

........VERY LOW HOURS........This machine has never been used in production, owner states less then

300 hours of run time