ancra container parts catalogue parts... · v1cp 2018/05 ancra container parts catalogue flooring...
TRANSCRIPT
w w w.a n c ra a u s t ra l i a . co m
V 1 C P 2 0 1 8 / 0 5
ANCRA Container Parts CatalogueFlooring & Accessories I Door Parts
Container Panels I Container Accessories & more
3www.ancraaustralia.com
CONTENTS
DOOR PARTS
Container Layout Drawing .................................................................................04Door Parts .................................................................................................................................04Bloxwich Door Parts ....................................................................................................05Alternative Door Parts .............................................................................................06Reefer Door Parts ..........................................................................................................07Door Gear Sets ..................................................................................................................08Locking Rod Sets.............................................................................................................08Locking Rods .........................................................................................................................08
Forged Handle Parts ....................................................................................... 08-09Door Hinges: Dry .............................................................................................................10Door Hinges: Pin...............................................................................................................10Door Gaskets & Sets .................................................................................................11Door Parts .................................................................................................................................12G-Strips .........................................................................................................................................12
Loctite Gasket Glue ....................................................................................................12
DOOR SECURITY
Door Security Seals .....................................................................................................12
CONTAINER ACCESSORIESPlywood Flooring .............................................................................................................13Plywood Rebate Flooring .....................................................................................13Floor Screws ...........................................................................................................................13Masking Tape.........................................................................................................................13
DECALSLetters & Numbers .......................................................................................................13Decals: Weight Panels..............................................................................................14Decals: General ..................................................................................................................14CSC Plates & Inspection Stickers ............................................................14
CONTAINER SHEETS/PANELS
Flat Sheets: Aluminium ...........................................................................................15Flat Sheets: Stainless Steel ...............................................................................15Flat Sheets: Corten ......................................................................................................15
CORTEN HEADERSCorten Headers ................................................................................................................15
ROOF PANELSCorrgation Roof Panels .............................................................................. 16-17
WALL PANELSCorten Side Wall Panel .............................................................................................18Corten Wall Panel...........................................................................................................18Cronos Side Wall Panel ............................................................................................19
CORTEN CHANNELSCorten Channels..............................................................................................................19Corten Angles ......................................................................................................................19
CORTEN DOOR SILLS
Corten Door Sills ..............................................................................................................20
Corten Front Sills .............................................................................................................20
CORNER POSTS
Corner Posts: Front ......................................................................................................21
Corner Posts: Rear ........................................................................................................21
Corner Posts: Rear Inserts ................................................................................21
REEFER PARTS
Corten Top Side Rail ....................................................................................................22
Aluminium Reefer Flooring ...............................................................................22
Reefer Covings ...................................................................................................................22
Kazoos ............................................................................................................................................23
Drain Plugs ................................................................................................................................23
Foam Products ...................................................................................................................23
CONTAINER ACCESSORIES
Ventilators .................................................................................................................................24
Tarpaulin Products .........................................................................................................24
Corner Castings................................................................................................................25
Container Straps ..............................................................................................................25
Odour Neutraliser ..........................................................................................................25
Cargo Jacking Bars .......................................................................................................26
Industrial Absorbents ...............................................................................................26
SAFETY GEAR
Safety Gear: Masks (Dust & Respirator) .........................................26
Safety Gear: Ear Plugs ..............................................................................................26
Safety Gear: Gloves .....................................................................................................26
CONTAINER CONSUMABLES
Silicone ...........................................................................................................................................27
Abrasives: Cutting/Grinding............................................................................27
Abrasives: Sanding ........................................................................................................27
Drill Bits ..........................................................................................................................................27
Fasteners: Rivets .............................................................................................................27
Nuts & Bolts ............................................................................................................................27
TWISTLOCKS
Twistlocks...................................................................................................................................28
Bridge Fitting..........................................................................................................................28
CARGO CARE
Dunnage Bags .....................................................................................................................29
Non-Toxic Desiccants ..............................................................................................30
TERMS & CONDITIONS
Terms &Conditions .....................................................................................................31
4CONTAINER PARTS CATALOGUE 2018 - 05
CONTAINER LAYOUT DRAWING
Form 4:03:2013:08:28:41 Page 7 of 106
Container Layout Drawing
DOOR PARTSFollowing are the diagrams and part numbers for the standard parts of container door locking equipment for both standard dry boxes and reefer containers. We have available most of the variances that can be found to these standard parts. If you cannot find the part you want please enquire with our staff.
LG10040 Hinge Bush (Black Plastic)LG10553 Upper Long Reefer Split Bush (Male)LG10558 Lower Long Reefer Split Bush (Female)LG11028 Bearing Bracket Outer Large (Steel)LG12262 Bearing Bracket Outer Large (Steel)LG12272 Bearing Bracket Inner Large (Plastic)LG60002 Hinge LugLG82000 Hinge blade 63.5mm WideLG83900 Antirack ringLG84005/1 Rod Guide (Steel Outer Bracket Small)LG84006/1 Rod Guide Bearing (Plastic Insert)LG84011 Seal Plate (Retainer Plate)LG84012 Seal Pin (Customs Catch)LG87001 Keeper Right HandLG87002 Keeper Left HandLG87003 Cam Right HandLG87004 Cam Left HandLG87006 Bearing Bracket Inner Large (Steel)LG87007 Upper Small Plastic Split Bush (Male)LG87008 Lower Small Plastic Split Bush (Female)LG87009S Bearing Bracket Outer Small (Steel)LG87010S Bearing Bracket Inner Small (Steel)
LG87011 Rivet For Door HandleLG87030/1 Handle HubLG87031/1 BushLG87032 Customs Catch (Forged)LG87033 Retainer Plate ( Forged)LG87034 Handle (Forged)LG87044 Handle Flat (Pressed)LG87105 Large Outer Bracket ReeferLG87106 Large Inner Bracket Reefer LGCIMC06022 CIMC Reefer Hinge Blade 127mm x 225mm (Aluminium)LGDOORTIE Container Door TieLGSET Door Gear Complete Set - No Locking RodLGSETL Door Gear Set including Left Hand RodLGSETR Door Gear Set including Right Hand RodLGHF002 Hinge Blade 79mm WideLGLASHRING Lashing RingLGPIN Hinge Pin 110mm LongLGPIN2 Hinge Pin 162mm LongLGRODL Complete Left Hand Rod (Forged Handle)LGRODR Complete Right Hand Rod (Forged Handle)MHINGEB Steel Reefer Hinge 101mm x 241mm
5www.ancraaustralia.com
BLOXWICH DOOR PARTS
LG87004Cam Left Hand
LG87002Keeper Left Hand
LG87006Bearing Bracket(Inner Large)
LG87010SBearing Bracket(Inner Small)
LG87008Lower Smaller PlasticSplit Bush (Female)
LG87030/1 Handle Hub
LG87011 Handle Rivet
LG87031/1 Bush
LG87032Custom Catch(Forged)
LG87033Retainer Plate(Forged)
LG87034Door Handle (Forged)
LG87001Keeper (Right Hand)
LG87003Cam (Right Hand)
LG83900Antirack Ring
LG11028Bearing Bracket(Outer Large)
LG87009SSmall Outer Bracket
LG87007Small Plastic Split Bush (Male)
LGBARLocking Bar
6CONTAINER PARTS CATALOGUE 2018 - 05
ALTERNATIVE DOOR PARTS
LG87004Cam Left Hand
LG12272Bearing Bracket(Inner Large)
LG84006/1Rod Guide Bearing (Plastic Insert)
LG84012Seal Pin(Customs Catch)
LG84011Seal Plate (Retainer)
LG12262Bearing Bracket Outer Large
LG87002Keeper Left Hand
LG87030/1 Handle Hub
LG12272 Bearing Bracket (Inner Large)
LG87011 Handle Rivet
LG84005/1 Rod Guide(Small Outer Bracket)
LG12262 Bearing BracketOuter Large
LG87044 Handle Flat (Pressed)
LG87001Keeper (Right Hand)
LG87003Cam (Right Hand)
7www.ancraaustralia.com
REEFER DOOR PARTS
LG87002Keeper Left Hand
LG87004Cam Left Hand
LG87106Bearing Bracket(Inner Large)
LG10558Lower Long Split Bush (Female)
LG87010S
LG87008
LG87010SBearing Bracket Inner (Small)
LG87106Bearing Bracket Inner (Large)
LG10558Lower Long Split Bush (Female)
LG87001Keeper (Right Hand)
LG87003Cam (Right Hand)
LG87009SSmall Outer
Bracket
LG87011Handle Rivet
LGBARLocking Rod
LG87007Small Plastic
Split Bush (Male)
LG87009SSmall Outer
(Bracket)
LG87105Large Outer
(Bracket Reefer)
LG10553Upper Long
Split Bush (Male)
LG87034Door Handle (Forged)
LG87032Custom Catch (Forged)
LG87033Retainer Plate (Forged)
LG87008Lower Small Plastic Split Bush (Female)
LG87030/1Handle Hub
LG87031/1Bush
8CONTAINER PARTS CATALOGUE 2018 - 05
DOOR GEAR SETS
LGSET CONTENTS
LG87001 X 1
LG87002 X 1
LG87033 X 1
LG87032 X 1
LG87031/1 X 1
LG12262 X 2
LG12272 X 2
LG87007 X 1
LG87008 X 1
LG87009S X 1
LG87010S X 1
DOOR GEAR SETS
LOCKING ROD SETSLocking Rod Sets contain full contents of LGSET (detailed above) PLUS one rod per set (LEFT or RIGHT).
PART No: LGSETL (left)
PART No: LGSETR (right, shown)
LOCKING RODSRods are also available as individual items
PART No: LGRODL (left)
PART No: LGRODR (right)
FORGED DOOR HANDLEPART No: LG87034
10.5322
33
139
FORGED HANDLE PARTS
9www.ancraaustralia.com
FORGED HANDLE PARTS
FORGED CUSTOMER CATCH FORGED RETAINER PLATEPART No: LG87032
RETAINER/CUSTOM CATCH BUSHPART No: LG87031/1
PART No: LG87033
PRESSED HANDLEPART No: LG87044
32
350
80 40 80
FLAT HANDLE RETAINER FLAT HANDLE CUSTOM CATCHPART No: LG84011 PART No: LG84012
10CONTAINER PARTS CATALOGUE 2018 - 05
DOOR HINGES: DRY
63.5MM DOOR HINGE
79MM DOOR HINGE
PART No: LG82000
PART No: LGHF002
HINGE LUGPART No: LG60002
INTERNAL LASHING RINGPART No: LGLASHRING
DOOR HINGES: PIN101MM STEEL REEFER HINGE
ALUMINIUM REEFER HINGE 127MM (CIMC)
PART No: MHINGEB
PART No: LGCIMC06022
108MM HINGE PIN (DRY BOX)
REEFER HINGE PIN 162MM
PART No: LGPIN
PART No: LGPIN2
11www.ancraaustralia.com
Form 4:03:2013:08:28:41 Page 28 of 106
Door Gasket Set
Door Gasket Set
Gavan Code: GK950SET
Gavan Code: GK950-1
Form 4:03:2013:08:28:41 Page 28 of 106
Door Gasket Set
Door Gasket Set
Gavan Code: GK950SET
Gavan Code: GK950-1
PART No: GK950 PART No: GK955
PART No: GK969PART No: GK958
PART No: GK966
SECTION A-A Typical Section
SECTION C-C Both Side Section
SECTION B-B Both Side Section
PART No: GK950SET
PART No: GK967 PART No: GK950-1 PART No: GK-06-003
* All measurements are in millimetres
PART No: GK965PART No: GK960
PART No: GK-06-027 PART No: GK954
DOOR GASKETS & SETS
DOOR GASKET SET40.00
23.5028.46
30.00
32.44
45.55
35.74
48.50
24.00
35.00
24.00
30.00
27.43
13.9811.00
30.00
44.00
45.00
47.00
25.00
30.00
44.50
28.92
17.55
42.5036.00
9.50
46.00
35.00
44.00
24.00
42.00
29.5012.50
46.00
11.00
24.00
35.50
12CONTAINER PARTS CATALOGUE 2018 - 05
DOOR PARTS
G-STRIPS LOCTITE GASKET GLUELOCTITE GASKET GLUE (406) - 25ML BOTTLEFLAT G-STRIP
ANGLE G-STRIP
Form 4:03:2013:08:28:41 Page 29 of 106
G-Strips and Loctite Gasket Glue
Flat G-Strip
Galvanised Steel 25mm x 2400mm x 1.0mm
Gavan Code: GSTRIP Angle G-Strip
Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm
Gavan Code: GSTRIP2
Loctite Gasket Glue (406) Gavan Code: GLUELQ
Form 4:03:2013:08:28:41 Page 29 of 106
G-Strips and Loctite Gasket Glue
Flat G-Strip
Galvanised Steel 25mm x 2400mm x 1.0mm
Gavan Code: GSTRIP Angle G-Strip
Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm
Gavan Code: GSTRIP2
Loctite Gasket Glue (406) Gavan Code: GLUELQ
PART No: GLUELQPART No: GSTRIP Galvanised Steel 25mm x 2400mm x 1.0mm
PART No: GSTRIP2 Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm
Form 4:03:2013:08:28:41 Page 20 of 106
Shipping Container Safety and Security
Container Door Tie Back Gavan Code: LGDOORTIE
Manufactured with strong wire rope as required by ISO requirement.
Under American Occupational Health and Safety Rules, Door Tie Backs must be attached to all containers and be made of “Wire”.
Container Lock Box With Key Gavan Code: LGDOORLOCK
High security door lock that is bolted to the shipping container or trailer door with bolts through the
door only accessible from the inside. This door lock is a secure way to help prevent unauthorised intrusions by crowbar or bolt cutters. The door lock includes two individually cut keys which is ideal in the supply chain – one key can be retained at the packing / loading location and the second key can be retained at the unpacking / discharge location ensuring cargo securement throughout the journey.
CONTAINER DOOR TIE BACKPART No: LGDOORTIE
Manufactured with strong wire rope as required by ISO requirement. Under American Occupational Health and Safety Rules, Door Tie Backs must be attached to all containers and be made of “Wire”.
DOOR SECURITYVARIOUS SECURITY SEALS
For trucks, shipping containers, rail wagons, bonded stores, or general application. We offer several different types of security seals: All of these tamper evident seals are impossible to open without destroying or visibly damaging the seal, therefore preventing theft and/or contamination of goods in transit or storage.
(1)
(2)
(3)
(4)
(5)
(1) SECURITY BOLT SEAL 4MM SHAFT SEALBOLT3
(2) HIGH SECURITY BOLTS SEAL (11.7MM DIAM) SEALBOLT
(3) PLASTIC STRIP SEAL SEALPLAST
(4) STEEL STRIP SEAL SEALSTEEL
(5) ZIP TYPE PLASTIC SEAL SEALTRANS
13www.ancraaustralia.com
CONTAINER ACCESSORIES
Container Plywood is manufactured to comply.
Treated with Basileum SI-84 (with regard to the Australian regulations). This plywood meets all food grade requirements.
We can supply other plywood sizes, as well as Bamboo Eco plywood, upon request. Minimum order quantities and lead times apply for these product requests.
PART No: FPLY
SHEET SIZE: 2440 X 1220 X 28 MM SHIPPING CONTAINER FLOOR LAMINATION AQIS APPROVED - 19 LAMINATIONS
2440mm
28mm
1220
mm
PLYWOOD REBATE FLOORING
2400mm
28mm
1160
mm
Rebated: 25mmL x 5mmD
PLYWOOD FLOORING
CONTAINER ACCESSORIES
PART No: FPLY-REBATE
REBATED PLY FLOORING WITH NICHE EDGING FOR SNUG FIT FOR CONTAINER FLOOR SIZE 1160MM X 2400 X 28MM WITH REBATE EDGE OF 5MM X 25MM
FLOOR SCREWS(1) PART No: DS65L
Large Head Floor Screw - 60mm Long x 16mm Head (900/Bx)
(2) PART No: DS60S Small Head Floor Screw - 65mm Long x 12mm Head (1000/Bx)
(3) PART No: DS60W Self Tapping Floor Screw - 65mm Long x 12mm Head (1200/Bx)
(4) PART No: PDRIVE Deck Screw Phillips Bit (P3) 31mm Long
PART No: MT48 - 48mm x 50mtr Roll
MASKING TAPE
Form 4:03:2013:08:28:41 Page 24 of 106
Masking Tape and Tarpaulins
MASKING TAPE
Gavan Code: MT24 24mm x 50mtr Roll Gavan Code: MT36 36mm x 50mtr Roll Gavan Code: MT48 48mm x 50mtr Roll
TARPAULINS
We stock and can manufacture both 40ft and 20ft tarpaulins using especially imported 3.2m material. Tarps supplied by Gavan are 630gsm which comply with current ISO standards.
We also have plans of most of the tarps used and can dispatch throughout Australia.
We can make all types of container tarps as well as open side tarps.
(1)
(2)
(3)
(4)
100MM – BLACK PART No: D100B- A-Z & 0-9
100MM – WHITE PART No: D100W- A-Z & 0-9
100MM – BLACK ON WHITE PART No: D100BW- A-Z & 0-9
50MM – BLACK PART No: D50B- A-Z & 0-9
50MM – WHITE PART No: D50W- A-Z & 0-9
50MM – BLACK ON WHITE PART No: D50BW- A-Z & 0-9
INDIVIDUAL LETTERS AND NUMBERS
Form 4:03:2013:08:28:41 Page 30 of 106
Decals: Individual letters and numbers
100MM – BLACK Gavan Code: D100B- A-Z & 0-9 100MM – WHITE Gavan Code: D100W- A-Z & 0-9 100MM – BLACK ON WHITE Gavan Code: D100BW- A-Z & 0-9 50MM – BLACK Gavan Code: D50B- A-Z & 0-9 50MM – WHITE Gavan Code: D50W- A-Z & 0-9 50MM – BLACK ON WHITE Gavan Code: D50BW- A-Z & 0-9
OTHER SIZES AND COLOURS AVAILABLE PRICE ON REQUEST. MINIMUM ORDER 10 OF EACH TYPE
Gavan can produce any fleet decal to suit - just fax details for a quote.
DECALS
14CONTAINER PARTS CATALOGUE 2018 - 05
DECALS
PART No: DZEB
9’6” Zebra Strip Decal
PART No: DHM2.6 Height Mark Decal 8’6” Black On Yellow
PART No: DHM2.9 Height Mark Decal 9’6” Black On Yellow
PART No: DCAUTION Black On Yellow
PART No: DCAUTION3 Black On Yellow
DECALS: WEIGHT PANELS
DECALS: GENERAL
Form 4:03:2013:08:28:41 Page 31 of 106
Decals: Weight Panels
Standard 24 Ton. Available in Black, White & Black On White
Gavan Code: DWPB24
Left Side Only. Available in Black, White & Black On White
Gavan Code: DWPBMAX
Custom Manufactured To Depots Requirements.
Gavan Code: DWPBN
Form 4:03:2013:08:28:41 Page 31 of 106
Decals: Weight Panels
Standard 24 Ton. Available in Black, White & Black On White
Gavan Code: DWPB24
Left Side Only. Available in Black, White & Black On White
Gavan Code: DWPBMAX
Custom Manufactured To Depots Requirements.
Gavan Code: DWPBN
PART No: DWPB24 Standard 24 Ton. Avail. in Black
PART No: DWP24 Black, White, Black On White
PART No: DWPBMAX Left Side Only. Black, White, Black On White
2,6m8' 6"CAUTION
9'6"HIGH
2,9m9' 6" CAUTION
2.9 9 HIGH12
Form 4:03:2013:08:28:41 Page 34 of 106
CSC Plates & Inspection Stickers
Small CSC Inspection Plate 200mm Wide x 100mm High
Gavan Code: CSC
Large CSC Inspection Plate 200mm Wide x 250mm High
Gavan Code: CSC2
CSC Re-Inspection Label
Available in individual labels or rolls of 600 stickers
Gavan Roll Code: CSCRELABEL Gavan Sticker Code: CSCSTICKER
CSC RE-INSPECTION LABELPART ROLL No: CSCRELABELPART STICKER No: CSCSTICKER Available in individual labels or rolls of 600 stickers
Form 4:03:2013:08:28:41 Page 34 of 106
CSC Plates & Inspection Stickers
Small CSC Inspection Plate 200mm Wide x 100mm High
Gavan Code: CSC
Large CSC Inspection Plate 200mm Wide x 250mm High
Gavan Code: CSC2
CSC Re-Inspection Label
Available in individual labels or rolls of 600 stickers
Gavan Roll Code: CSCRELABEL Gavan Sticker Code: CSCSTICKER
SMALL CSC INSPECTION PLATEPART No: CSC200mm Wide x 100mm High
Form 4:03:2013:08:28:41 Page 34 of 106
CSC Plates & Inspection Stickers
Small CSC Inspection Plate 200mm Wide x 100mm High
Gavan Code: CSC
Large CSC Inspection Plate 200mm Wide x 250mm High
Gavan Code: CSC2
CSC Re-Inspection Label
Available in individual labels or rolls of 600 stickers
Gavan Roll Code: CSCRELABEL Gavan Sticker Code: CSCSTICKER
LARGE CSC INSPECTION PLATEPART No: CSC2200mm Wide x 250mm High
BLACK ETCHING
15www.ancraaustralia.com
CONTAINER SHEETS/PANELS
Form 4:03:2013:08:28:41 Page 42 of 106
Flat Sheets: Aluminium and Stainless
ALUMINIUM SHEET
Aluminium Sheet 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0
Aluminium Sheet 1200mmx2400mm x 1.2mm Gavan Code: ALU1.2
Aluminium Sheet 1200mmx2400mm x 1.6mm Gavan Code: ALU1.6
Powder Coated Aluminium 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0PC
Powder Coated Aluminium 1200mmx2400mm x 1.6mm Gavan Code: ALU1.6PC
All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements. STAINLESS STEEL FLAT SHEET
Stainless Sheet G304 - 2B 1200mm x 2400mm x 0.9mm Gavan Code: SS0.9
Stainless Sheet G304 - 2B 1200mm x 2400mm x 1.5mm Gavan Code: SS1.5
Form 4:03:2013:08:28:41 Page 42 of 106
Flat Sheets: Aluminium and Stainless
ALUMINIUM SHEET
Aluminium Sheet 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0
Aluminium Sheet 1200mmx2400mm x 1.2mm Gavan Code: ALU1.2
Aluminium Sheet 1200mmx2400mm x 1.6mm Gavan Code: ALU1.6
Powder Coated Aluminium 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0PC
Powder Coated Aluminium 1200mmx2400mm x 1.6mm Gavan Code: ALU1.6PC
All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements. STAINLESS STEEL FLAT SHEET
Stainless Sheet G304 - 2B 1200mm x 2400mm x 0.9mm Gavan Code: SS0.9
Stainless Sheet G304 - 2B 1200mm x 2400mm x 1.5mm Gavan Code: SS1.5
Form 4:03:2013:08:28:41 Page 43 of 106
Flat Sheets: Corten CORTEN FLAT SHEET
Corten Sheet 1185 x 2380 x 1.6mm Gavan Code: ST1.6
Corten Sheet 1185 x 2700 x 1.6mm Gavan Code: ST1.6H
Corten Sheet 1225 x 2380 x 2.0mm Gavan Code: ST2.0
Corten Sheet 1225 x 2743 x 2.0mm Gavan Code: ST2.0H
Corten Sheet 1200 x 2400 x 3.0mm Gavan Code: ST3.0
Corten Sheet 1320 x 2420 x 4.0mm Gavan Code: ST4.0
Corten Sheet 1360 x 2420 x 4.5mm Gavan Code: ST4.5
Corten Sheet 1302 x 2420 x 6.0mm Gavan Code: ST6.0
Corten Sheet 1460 x 2700 x 6.0mm Gavan Code: ST6.0H
Sheet sizes may vary occasionally please check the size you require when ordering. Gavan can cut any width and length as requested.
ALUMINIUM SHEET
STAINLESS STEEL FLAT SHEET
CORTEN FLAT SHEET
PART No: ALU1.0 Aluminium Sheet - 1200mmx2400mm x 1.0mm
PART No: ALU1.2 Aluminium Sheet - 1200mmx2400mm x 1.2mm
PART No: ALU1.6 Aluminium Sheet - 1200mmx2400mm x 1.6mm
PART No: ALU1.0PC Powder Coated Aluminium - 1200mmx2400mm x 1.0mm
PART No: ALU1.6PC Powder Coated Aluminium - 1200mmx2400mm x 1.6mm
PART No: SS0.9 Stainless Sheet G304 - 2B - 1200mm x 2400mm x 0.9mm
PART No: SS1.5 Stainless Sheet G304 - 2B - 1200mm x 2400mm x 1.5mm
PART No: ST1.6 Corten Sheet - 1185 x 2380 x 1.6mm
PART No: ST1.6H Corten Sheet - 1185 x 2700 x 1.6mm
PART No: ST2.0 Corten Sheet - 1225 x 2380 x 2.0mm
PART No: ST2.0H Corten Sheet - 1225 x 2743 x 2.0mm
PART No: ST3.0 Corten Sheet - 1200 x 2400 x 3.0mm
PART No: ST4.0 Corten Sheet - 1320 x 2420 x 4.0mm
PART No: ST4.5 Corten Sheet - 1360 x 2420 x 4.5mm
PART No: ST6.0 Corten Sheet - 1302 x 2420 x 6.0mm
PART No: ST6.0H Corten Sheet - 1460 x 2700 x 6.0mm
All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements.
Sheet sizes may vary occasionally please check the size you require when ordering.
CORTEN HEADERS
Form 4:03:2013:08:28:41 Page 54 of 106
Corten Headers
Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm
Gavan Code: HEADERI
Header Plate 105 x 36 x 270 x 2420 x 4.0mm
Gavan Code: HEADERO
Form 4:03:2013:08:28:41 Page 54 of 106
Corten Headers
Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm
Gavan Code: HEADERI
Header Plate 105 x 36 x 270 x 2420 x 4.0mm
Gavan Code: HEADERO
CORTEN HEADERS
PART No: HEADERI
Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm
PART No: HEADERO
Header Plate 105 x 36 x 270 x 2420 x 4.0mm
16CONTAINER PARTS CATALOGUE 2018 - 05
ROOF PANELS
Form 4:03:2013:08:28:41 Page 44 of 106
Roof Panels
Corten five corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP
Form 4:03:2013:08:28:41 Page 44 of 106
Roof Panels
Corten five corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP
Form 4:03:2013:08:28:41 Page 44 of 106
Roof Panels
Corten five corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP
CORTEN FIVE CORRUGATION ROOF PANEL
PART No: ROOFP 2.0mm fully primed
SECTION A-A
DETAIL B
Form 4:03:2013:08:28:41 Page 45 of 106
Corten three corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP3
Form 4:03:2013:08:28:41 Page 45 of 106
Corten three corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP3
Form 4:03:2013:08:28:41 Page 45 of 106
Corten three corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP3
CORTEN THREE CORRUGATION ROOF PANEL
SECTION B-B
Form 4:03:2013:08:28:41 Page 45 of 106
Corten three corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP3
Form 4:03:2013:08:28:41 Page 44 of 106
Roof Panels
Corten five corrugation roof panel
2.0mm fully primed Gavan Code: ROOFP
PART No: ROOFP3 2.0mm fully primed
17www.ancraaustralia.com
Form 4:03:2013:08:28:41 Page 46 of 106
Corten four corrugation roof panel 2.0mm fully primed
Gavan Code: ROOFP4
ROOF PANELS
Form 4:03:2013:08:28:41 Page 46 of 106
Corten four corrugation roof panel 2.0mm fully primed
Gavan Code: ROOFP4
Form 4:03:2013:08:28:41 Page 46 of 106
Corten four corrugation roof panel 2.0mm fully primed
Gavan Code: ROOFP4
CORTEN FOUR CORRUGATION ROOF PANEL
PART No: ROOFP4
2.0mm fully primed
Form 4:03:2013:08:28:41 Page 46 of 106
Corten four corrugation roof panel 2.0mm fully primed
Gavan Code: ROOFP4
Form 4:03:2013:08:28:41 Page 47 of 106
Corten five corrugation roof patch 2.0mm fully primed
Gavan Code: ROOFPE2
Form 4:03:2013:08:28:41 Page 47 of 106
Corten five corrugation roof patch 2.0mm fully primed
Gavan Code: ROOFPE2
Form 4:03:2013:08:28:41 Page 47 of 106
Corten five corrugation roof patch 2.0mm fully primed
Gavan Code: ROOFPE2
CORTEN FIVE CORRUGATION ROOF PATCH
PART No: ROOFPE2 2.0mm fully primed
18CONTAINER PARTS CATALOGUE 2018 - 05
WALL PANELS
Form 4:03:2013:08:28:41 Page 48 of 106
Wall Panels: Corten Side
CORTEN SIDE WALL PANELS
Available in 8’6” and 9’6”
1.6mm x 2375mm x 1116mm Gavan Code: PSWA
1.6mm x 2742mm x 1116mm Gavan Code: PSWAH
Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales representative for more information.
Form 4:03:2013:08:28:41 Page 49 of 106
Wall Panels: Corten Front CORTEN FRONT WALL PANELS
Available in 8’6” and 9’6”
2.0mm x 1024mm x 2400mm Gavan Code: PFR
2.0mm x 1024mm x 2700mm Gavan Code: PFRH
Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales rep for more information.
Form 4:03:2013:08:28:41 Page 48 of 106
Wall Panels: Corten Side
CORTEN SIDE WALL PANELS
Available in 8’6” and 9’6”
1.6mm x 2375mm x 1116mm Gavan Code: PSWA
1.6mm x 2742mm x 1116mm Gavan Code: PSWAH
Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales representative for more information.
Form 4:03:2013:08:28:41 Page 49 of 106
Wall Panels: Corten Front CORTEN FRONT WALL PANELS
Available in 8’6” and 9’6”
2.0mm x 1024mm x 2400mm Gavan Code: PFR
2.0mm x 1024mm x 2700mm Gavan Code: PFRH
Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales rep for more information.
CORTEN SIDE WALL PANELS
CORTEN FRONT WALL PANELS
Available in 8’6” and 9’6”
PART No: PSWA 1.6mm x 2375mm x 1116mm
PART No: PSWAH 1.6mm x 2742mm x 1116mm
Available in 8’6” and 9’6”
PART No: PFR 2.0mm x 1024mm x 2400mm
PART No: PFRH 2.0mm x 1024mm x 2700mm
19www.ancraaustralia.com
WALL PANELS
Form 4:03:2013:08:28:41 Page 50 of 106
Wall Panels
Cronos side wall panel 2507mm long x 1075mm wide x 2.0mm Corten
Gavan Code: PCRONOS
Form 4:03:2013:08:28:41 Page 50 of 106
Wall Panels
Cronos side wall panel 2507mm long x 1075mm wide x 2.0mm Corten
Gavan Code: PCRONOS
CRONOS SIDE WALL PANELPART No: PCRONOS 2507mm long x 1075mm wide x 2.0mm Corten
CORTEN CHANNELS/ANGLES
Form 4:03:2013:08:28:41 Page 52 of 106
Corten Channels
Corten channels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured channels. CORTEN CHANNEL
Corten Channel 45x80x45x2350x4.0mm Gavan Code: C458045
Corten Channel 50x100x50x2350x4.0mm Gavan Code: C5010050
Corten Channel 45x122x45x2350x4.0mm Gavan Code: C4512245
Corten Channel 75x122x45x2350x4.0mm Gavan Code: C7512245
Corten Channel 50x158x30x2350x4.0mm Gavan Code: C5015830
Form 4:03:2013:08:28:41 Page 52 of 106
Corten Channels
Corten channels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured channels. CORTEN CHANNEL
Corten Channel 45x80x45x2350x4.0mm Gavan Code: C458045
Corten Channel 50x100x50x2350x4.0mm Gavan Code: C5010050
Corten Channel 45x122x45x2350x4.0mm Gavan Code: C4512245
Corten Channel 75x122x45x2350x4.0mm Gavan Code: C7512245
Corten Channel 50x158x30x2350x4.0mm Gavan Code: C5015830
CORTEN CHANNEL
Corten channels are available in standard sizes listed below. Other sizes imported on request.
PART No: C4512245 Corten Channel - 45x122x45x2350x4.0mm
PART No: C7512245 Corten Channel - 75x122x45x2350x4.0mm
Form 4:03:2013:08:28:41 Page 53 of 106
Corten Angles
Corten angels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured angels. CORTEN ANGLE
Corten Angle 100x50x2350x4.0mm Gavan Code: A100/50
Corten Angle 115x45x2350x4.0mm Gavan Code: A115/45
Corten Angle 120x50x2350x4.0mm Gavan Code: A120/50
Corten Angle 150x60x2350x4.0mm Gavan Code: A150/60
Corten Angle 50x30x2350x6.0mm Gavan Code: A50/306MM
Form 4:03:2013:08:28:41 Page 53 of 106
Corten Angles
Corten angels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured angels. CORTEN ANGLE
Corten Angle 100x50x2350x4.0mm Gavan Code: A100/50
Corten Angle 115x45x2350x4.0mm Gavan Code: A115/45
Corten Angle 120x50x2350x4.0mm Gavan Code: A120/50
Corten Angle 150x60x2350x4.0mm Gavan Code: A150/60
Corten Angle 50x30x2350x6.0mm Gavan Code: A50/306MM
CORTEN ANGLESCorten angels are available in standard sizes listed below.Other sizes imported on request.
PART No: A120/50 Corten Angle -120x50x2350x4.0mm
PART No: A50/306MM Corten Angle - 50x30x2350x6.0mm
20CONTAINER PARTS CATALOGUE 2018 - 05
CORTEN DOOR SILLS
Form 4:03:2013:08:28:41 Page 55 of 106
Corten Door Sills
Corten Rear (Door) Sill 113mm Top
Gavan Code: SILLR
Corten Rear (Door) Sill 120mm Top
Gavan Code: SILLR120
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
Form 4:03:2013:08:28:41 Page 56 of 106
Corten Front Sills
Corten Front Sill
80mm Top Gavan Code: SILLF
Corten Front Sill 60mm Top
Gavan Code: SILLF60
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
Form 4:03:2013:08:28:41 Page 56 of 106
Corten Front Sills
Corten Front Sill
80mm Top Gavan Code: SILLF
Corten Front Sill 60mm Top
Gavan Code: SILLF60
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
CORTEN DOOR SILLS
CORTEN FRONT SILLS
Form 4:03:2013:08:28:41 Page 56 of 106
Corten Front Sills
Corten Front Sill
80mm Top Gavan Code: SILLF
Corten Front Sill 60mm Top
Gavan Code: SILLF60
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
PART No: SILLR Corten Rear (Door) Sill - 113mm Top
PART No: SILLR120 Corten Rear (Door) Sill - 120mm Top
PART No: SILLF Corten Front Sill - 80mm Top
PART No: SILLF60
Corten Front Sill - 60mm Top
Form 4:03:2013:08:28:41 Page 55 of 106
Corten Door Sills
Corten Rear (Door) Sill 113mm Top
Gavan Code: SILLR
Corten Rear (Door) Sill 120mm Top
Gavan Code: SILLR120
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
Form 4:03:2013:08:28:41 Page 55 of 106
Corten Door Sills
Corten Rear (Door) Sill 113mm Top
Gavan Code: SILLR
Corten Rear (Door) Sill 120mm Top
Gavan Code: SILLR120
Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.
21www.ancraaustralia.com
CORNER POSTS
CORTEN CORNER POSTS - FRONT
Form 4:03:2013:08:28:41 Page 58 of 106
Corner Posts
Corten Corner Post 8’6” – 2420mm Long
Gavan Code: CNRPOST
Corten Corner Post High Cube
9’6” – 2745mm Long Gavan Code: CNRPOSTH
Corten Rear Corner Post 8’6” – 2400mm Long
Gavan Code: CNRPOSTR
Corten Rear Corner Post High Cube
9’6” – 2700mm Long Gavan Code: CNRPOSTRH
Corten Rear Corner Post Insert 40x113x40x2353mm
Gavan Code: CNRPOSTI
Corten Rear Corner Post Insert High Cube
40x113x40x2657mm Gavan Code: CNRPOSTIH
PART No: CNRPOST Corten Corner Post - 8’6” – 2420mm Long
PART No: CNRPOSTH Corten Corner Post High Cube - 9’6” – 2745mm Long
CORTEN CORNER POSTS - REAR INSERTS
PART No: CNRPOSTI Corten Rear Corner Post Insert - 40x113x40x2353mm
PART No: CNRPOSTIH Corten Rear Corner Post Insert High Cube - 40x113x40x2657mm
113mm
6mm
40m
m
CORTEN - TOP RAILS
PART No: TOPRAIL60 Corten Steel Top Rail - Blasted and Primed Square Tube 60mm x 60mm x 5720mm x 3.0mm
TOP60mm
3mm
60m
m
CORTEN CORNER POSTS - REAR
PART No: CNRPOSTR Corten Rear Corner Post - 8’6” – 2400mm Long
PART No: CNRPOSTRH Corten Rear Corner Post High Cube 9’6” – 2700mm Long
40m
m30mm
230mm 50mm
16.0
3-90º
30m
m
156m
m
75mm
56mm
171mm
75m
m
22CONTAINER PARTS CATALOGUE 2018 - 05
Form 4:03:2013:08:28:41 Page 85 of 106
Reefer Covings
PVC Door Moulding Gavan Code: RFDM01
PVC Door Moulding Gavan Code: RFDM03
PVC Door Moulding Gavan Code: RFDM04
REEFER PARTS
CORTEN TOP SIDE RAIL - REEFER
Form 4:03:2013:08:28:41
Page 75 of 106
Reefer Parts: C
orten Top Rail
C
orten Top Side R
ail 2400m
m Long x 4.0m
m C
orten Steel G
avan Code: TO
PRA
ILRF
PART No: TOPRAILRF CortenSteel - 2400mm Long x 4.0mm
ALUMINIUM REEFER FLOORING
Form 4:03:2013:08:28:41 Page 80 of 106
Aluminium Reefer Flooring
Both sections are available in 3000mm and 1800mm lengths.
Top Section Gavan Code: RFAFT & RFAFT1.8
Bottom Section Gavan Code: RFAFB & RFAFB1.8
Form 4:03:2013:08:28:41 Page 80 of 106
Aluminium Reefer Flooring
Both sections are available in 3000mm and 1800mm lengths.
Top Section Gavan Code: RFAFT & RFAFT1.8
Bottom Section Gavan Code: RFAFB & RFAFB1.8
Form 4:03:2013:08:28:41 Page 80 of 106
Aluminium Reefer Flooring
Both sections are available in 3000mm and 1800mm lengths.
Top Section Gavan Code: RFAFT & RFAFT1.8
Bottom Section Gavan Code: RFAFB & RFAFB1.8
Both sections are available in 3000mm lengths.
PART No: RFAFT Top Section
PART No:RFAFB Bottom Section
TOP SECTION RFAFT
BOTTOM SECTION RFAFB
REEFER COVINGS
Form 4:03:2013:08:28:41 Page 85 of 106
Reefer Covings
PVC Door Moulding Gavan Code: RFDM01
PVC Door Moulding Gavan Code: RFDM03
PVC Door Moulding Gavan Code: RFDM04
Form 4:03:2013:08:28:41 Page 86 of 106
PVC Door Moulding Gavan Code: RFDM05
PVC Door Moulding Gavan Code: RFDM008
PVC Door Moulding Gavan Code: RFDM012
PVC Door Ledge
Gavan Code: RFL001
Form 4:03:2013:08:28:41 Page 86 of 106
PVC Door Moulding Gavan Code: RFDM05
PVC Door Moulding Gavan Code: RFDM008
PVC Door Moulding Gavan Code: RFDM012
PVC Door Ledge
Gavan Code: RFL001
Form 4:03:2013:08:28:41 Page 85 of 106
Reefer Covings
PVC Door Moulding Gavan Code: RFDM01
PVC Door Moulding Gavan Code: RFDM03
PVC Door Moulding Gavan Code: RFDM04
VC DOOR MOULDINGS
PART No: RFDM01
PART No: RFDM03
PART No: RFDM04
PART No: RFDM05
PART No: RFDM012
PART No: RFDM01
PART No: RFDM05 PART No: RFDM012PART No: RFDM04
PART No: RFDM03
23www.ancraaustralia.com
REEFER PARTS
KAZOOS
Durable black rubber drain hose for refrigerated shipping containers.Available in two sizes.
PART No: KAZOOL KAZOO - LARGE: 85mm Long
PART No: KAZOO KAZOO - SMALL: 80mm Long
DRAIN PLUGSPART No: RFDSALI REEFER DRAIN SYSTEM - ALUMINIUM PIPE
PART No: RFDSAD REEFER DRAIN SYSTEM - AUTO DRAIN INNER
PART No: RFDSP REEFER DRAIN SYSTEM - PLASTIC EXIT PIECE
PART No: DP32 38mm (TOP) 32mm (BASE) DP32 DRAIN PLUG
PART No: RFDSALIREEFER DRAIN SYSTEM
PART No: RFDSPPLASTIC EXIT PIECE
PART No: RFDSADAUTO DRAIN INNER
POURING FOAM
PART No: FOAMHP40 ISO PART A&B POURING FOAM Free Rise Density = 32KG/M3
FOAM PRODUCTS
24CONTAINER PARTS CATALOGUE 2018 - 05
CONTAINER ACCESSORIES
Form 4:03:2013:08:28:41 Page 35 of 106
Ventilators
Small Vent for Use Inside Exterior Corrugation Gavan Code: VENTS
(Colour May Vary)
SMALL VENT FOR USE INSIDE EXTERIOR CORRUGATION
PART No: VENTSColour may vary
TARPAULIN PRODUCTSTARPAULIN WIRE
PART No: TW20 & TW40 AVAILABLE IN 20’ & 40’
COMPLETE TARPAULIN EYELETS - ROUND
TARP WIREPART No: TCLIP END CLIP SET
PART No: TEYER SUPPLIED C/W FRONT AND BACK
68.00
42.00
205.00180.00
25www.ancraaustralia.com
CONTAINER ACCESSORIES
PART No: CCBR CORNER CAST BOTTOM RIGHT
PART No: CCBL CORNER CAST BOTTOM LEFT
PART No: CCTL CORNER CAST TOP LEFT
PART No: CCTR CORNER CAST TOP RIGHT
Weight 11.50 kg High quality Cast Steel Aldur s45. Shotblasted, primed and machined on six sides. Manufactured in accordance with ISO 1161
SHIPPING CORNER CASTINGS
CONTAINER STRAPSCONTAINER TIEDOWN STRAP 9MX50MMXLC2T
PART No: RT-TTD/C3 Container Tiedown Strap 9mx50mmxLC2T
ODOUR NEUTRALISERSHIPPING CONTAINER ODOUR NEUTRALISER
PART No: PS50
Perfect for removing the after smell of food or fish products from containers. Available in 5ltr containers. Various sizes and strengths available upon request.
BOTTOM LEFT
BOTTOM RIGHT
BOTTOM LEFT
BOTTOM RIGHT
TOP RIGHT
TOP LEFT
TOP LEFT
TOP RIGHT
26CONTAINER PARTS CATALOGUE 2018 - 05
Form 4:03:2013:08:28:41 Page 97 of 106
Safety Gear: Masks (Dust & Respirator)
P2 Dust Masks with filter (12 Per Carton)
Gavan Code: SGDMASK2
Half mask respirator with duel filters
Gavan Code: SGHALFMASK
CONTAINER ACCESSORIES
CARGO JACKING BARSCargo bars offer strong support for your cargo. Cargo bars expand to fit tightly against the sides of a container or truck walls and lock in place without excessive pressure. Cargo bars feature 2” x 4” bolt-on padded feet for no-slip traction once they are extended to appropriate pressure. These adjustable round steel tube load bars are made of high-quality steel and adjust from 2175mm to 2910mm.
PART No: RT-JACKBAR JACKING BAR - WWL 600kg
INDUSTRIAL ABSORBENTS
SAFETY GEAR
SUKERUP ABSORBENT
MASKS : DUST & RESPIRATOR HALF MASK RESPIRATOR WITH DUEL FILTERS
LEATHER RIGGERS GLOVES
EAR PLUGS
WELDING GLOVES
Form 4:03:2013:08:28:41 Page 96 of 106
Industrial Absorbents
Gavan Code: DG-ABSFLR50L
Sukerup Organic Absorbent is 100% organic and contains no chemical residues. It is made from ground coconut husk milled to the right particle size to allow maximum absorbtion. The reason it is such an effective absorbent is each particle is made up tiny capillaries that together work as thousands of micro sponges. Sukerup Organic is an annually renewable resource that is safe for the workplace and the environment. It absorbs much quicker and more efficiently than clay based absorbents and does not become slippery. This means a quicker response and cleanup, less absorbent used and cheaper disposal costs.
No toxins or chemical residues Free of harmful dust Absorbs many times its weight Meets EPA requirements Natural inert material Bio-degradable Suitable for hydrocarbon and aqueous spills Made from renewable resources
Sukerup absorbent is also available in 15 Litre bags upon request.
Form 4:03:2013:08:28:41 Page 97 of 106
Safety Gear: Masks (Dust & Respirator)
P2 Dust Masks with filter (12 Per Carton)
Gavan Code: SGDMASK2
Half mask respirator with duel filters
Gavan Code: SGHALFMASK
Form 4:03:2013:08:28:41 Page 97 of 106
Safety Gear: Masks (Dust & Respirator)
P2 Dust Masks with filter (12 Per Carton)
Gavan Code: SGDMASK2
Half mask respirator with duel filters
Gavan Code: SGHALFMASK
Form 4:03:2013:08:28:41 Page 99 of 106
Safety Gear: Gloves
Cowhide leather riggers gloves Available in two sizes
Large Gavan Code: SG-GLVRIGLGE
X-Large Gavan Code: SG-GLVRIGXLGE
High quality welding gloves Gavan Code: SG-GLVWELD
(Brand may vary from store to store)
Sukerup Organic Absorbent is 100% organic and contains no chemical residues.
It is made from ground coconut husk milled to the right particle size to allow maximum absorbtion.
The reason it is such an effective absorbent is each particle is made up tiny capillaries that together work as thousands of micro sponges. Sukerup Organic is an annually renewable resource that is safe for the workplace and the environment. It absorbs much quicker and more efficiently than clay based absorbents and does not become slippery. This means a quicker response and cleanup, less absorbent used and cheaper disposal costs.
• No toxins or chemical residues• Free of harmful dust• Absorbs many times its weight• Meets EPA requirements• Natural inert material• Bio-degradable• Suitable for hydrocarbon and aqueous spills• Made from renewable resources
PART No: SGDMASK2 P2 Dust Masks with filter (12 Per Carton)
PART No: SGHALFMASK
PART No: SGEPLUG2 Un-Corded ear plugsProtects up to 110db (200 Pairs per carton)
PART No: SG-GLVWELD High quality welding gloves
Form 4:03:2013:08:28:41 Page 99 of 106
Safety Gear: Gloves
Cowhide leather riggers gloves Available in two sizes
Large Gavan Code: SG-GLVRIGLGE
X-Large Gavan Code: SG-GLVRIGXLGE
High quality welding gloves Gavan Code: SG-GLVWELD
(Brand may vary from store to store)
Form 4:03:2013:08:28:41 Page 98 of 106
Safety Gear: Ear Plugs and Glasses
Un-Corded ear plugs Protects up to 110db (200 Pairs per carton)
Gavan Code: SGEPLUG2 (Brand may vary from store to store)
Safety glasses We can currently supply in three colours clear, smoke and amber.
Available in many styles upon request.
Clear Gavan Code: SGGLASS01
Smoke Gavan Code: SGGLASS02
Amber Gavan Code: SGGLASS03
(Brand may vary from store to store)
PART No: SG-GLVRIGMED MEDIUM - Cowhide leather riggers gloves
PART No: SG-GLVRIGLGE LARGE - Cowhide leather riggers gloves
PART No: SG-GLVRIGXLGE X-LARGE - Cowhide leather riggers gloves
PART No: DG-ABSFLR50LSukerup absorbent is also available in 15 Litre bags upon request.
27www.ancraaustralia.com
CONTAINER CONSUMABLES
ABRASIVES: CUTTING/GRINDING
ABRASIVES: SANDING
Form 4:03:2013:08:28:41 Page 37 of 106
Abrasives: Cutting/Grinding
ABRASIVES: CUTTING/GRINDING Abrasives 102mm x 2.5mm Cutting Gavan Code: AB102X2.5
Abrasives 102mm X 6mm Grinding Gavan Code: AB102X6
Abrasives Cutting Disc 115x1 Gavan Code: AB115X1
Abrasives 115mm X 2.5mm Cutting 4.5'' Gavan Code: AB115X2.5
Abrasives 115mm X 6mm Grinding. 4.5'' Gavan Code: AB115X6
Abrasive Cutting Disc (SS) 125x1x22 Gavan Code: AB125X1
Abrasives 125mm X 2.5mm Cutting Gavan Code: AB125X2.5
Abrasives 125mm X 6.8mm Grinding Gavan Code: AB125X6.8
Abrasives 230mmx2.5mmx22mm Cutting Gavan Code: AB230X2.5
Abrasives 230mm X 6.8mm Grinding Gavan Code: AB230X6.8
Abrasives 356mmX3mmx25.4 (drop saw) Gavan Code: AB356X3 ABRASIVES: OTHER
Twist knot Cup brush 75xM10 Gavan Code: ABCUPBRUSH7510
Cup Brush Twist Knot Type 75x14x2.0 Gavan Code: ABCUPBRUSH7514 For all other sizes or styles please contact your local branch for more information.
NEUTRAL SILICONE
CUTTING/GRINDING
SANDING DISCSOTHER
SIKAFLEX SILICONE
PART No: SILICONEB Black Silicone
PART No: SILICONEC Clear Silicone
PART No: SILICONEG Grey Silicone
PART No: SILICONEW White Silicone
PART No: AB102X2.5 - Abrasives 102mm x 2.5mm Cutting
PART No: AB102X6 - Abrasives 102mm X 6mm Grinding PART No: AB115X1 - Abrasives Cutting Disc 115x1
PART No: AB115X2.5 - Abrasives 115mm X 2.5mm Cutting 4.5''
PART No: AB115X6 - Abrasives 115mm X 6mm Grinding. 4.5''
PART No: AB125X1 - Abrasive Cutting Disc (SS) 125x1x22
PART No: AB125X2.5 - Abrasives 125mm X 2.5mm Cutting
PART No: AB125X6.8 - Abrasives 125mm X 6.8mm Grinding
PART No: AB230X2.5 - Abrasives 230mmx2.5mmx22mm Cutting
PART No: AB230X6.8 - Abrasives 230mm X 6.8mm Grinding
PART No: AB356X3 - Abrasives 356mmX3mmx25.4 (drop saw)
PART No: SD180P24 - Sanding Disc 180 x 22mm 24 Grit.(7inch)
PART No: FS200P24CB - Sanding Sheet 200 x 475mm P24 Cloth BacK
Other sizes are available on request.
PART No: ABCUPBRUSH7510 - Twist knot Cup brush 75xM10
PART No: ABCUPBRUSH7514 - Cup Brush Twist Knot Type 75x14x2.0
PART No: SIKA11FC-BL Black FCPART No: SIKA227B BlackPART No: SIKA227W White
• Low odour • Non Corrosive• Permanently flexible • Form waterproof/weatherproof seal
Sikaflex is a polyurethane sealant/adhesive that is available in many grades in a cartridge or sausage form. This item is a general purpose sealant that is great for use on metal, rubber, wood and plastic. This product is available in many grades and strengths.
Available in 2 colours:
Form 4:03:2013:08:28:41 Page 39 of 106
Drill Bits
4.9mm Drill Bit Gavan Code: DRILL4.9
5.0mm Drill Bit Gavan Code: DRILL5.0
5.5mm Drill Bit Gavan Code: DRILL5.5
7/32 Drill Bit Gavan Code: DRILL7/32
All other drill bit sizes are available upon request. Please contact your local branch for more information regarding your requirements.
Form 4:03:2013:08:28:41 Page 41 of 106
Lock Bolts
3/8 Aluminium Huck Bolt Collar Gavan Code: RV2LC-F12
3/8 Aluminium Huck Bolt Flanged Collar Gavan Code: RV3LC-F12
3/8 Aluminium Huck Lock Bolt Gavan Code: RVC6LB-C1208
3/8 Aluminium Huck Lock Bolt Gavan Code: RVC6LB-C1210
3/8 Aluminium Huck Lock Bolt Gavan Code: RVC6LB-C1216
Nuts & Bolts
Zinc Plated Nut & Bolt set, 10mm x 35mm Gavan Code: NUT/BOLT
DRILL BITS
SEALED RIVETSPART No: RVTA64SS - 3/16 Sealed End Rivet (Stainless)
PART No: RVTA65 - 3/16 Sealed End Rivet
PART No: RVTA68 - 3/16 Sealed End Rivet
PART No: RVTA610 - 3/16 Sealed End Rivet
NUTS & BOLTSPART No: NUT/BOLT Zinc Plated Nut & Bolt set - 10mm x 35mm
BLIND RIVETSPART No: RVPAS68LF Blind Rivet Large Flange 4.8/16.7mm
PART No: RVPAS612LF Blind Rivet Large Flange 4.8/23.8mm
PART No: DRILL4.9 4.9mm Drill Bit
PART No: DRILL5.0 5.0mm Drill Bit
PART No: DRILL5.2 5.2mm Drill Bit
PART No: DRILL5.5 5.5mm Drill Bit
All other drill bit sizes are available upon request. Please contact your local branch for more information regarding your requirements.
FASTENERS: RIVETSWe currently stock a large range of rivets. Below is a list of the most common rivets we stock. For all other rivets please contact your local sales representative so we can source this product for you.
NEUT
RAL
SILI
CONE
28CONTAINER PARTS CATALOGUE 2018 - 05
Form 7:02:2013:14:47:46 Page 97 of 102
Dovetail twistlock (Galvanised)
Left hand locking Safe working load 25,000Kg
Gavan Code: MLT4-1L
Base to suit dovetail twistlock
Cast steel with a safe working load of 25,000Kg Gavan Code: MLDF-1A
TWISTLOCK - FLATRACK
Form 4:03:2013:08:28:41
Page 68 of 106
Flatrack: Twistlock
Gavan C
ode: FR4C1026
PART No: FR4C1026 Forged Steel Body with one piece head and tail
Large operating clearances internally to over-come dirt and corrosion.
Stainless Steel Leaf Springs
Low temperature grease applied as standard
PART No: MLT1-2L
MARINE STACKING TWISTLOCK (Double stacking) SECURING CONTAINERS WHEN STACKED TWISTLOCK HOT DIPPED GALVANISED WEIGHT: 5.8KG SWL: 25 TON BL: 50 TONS
Version: 1.04 2015 AU Page 100 of 105
Lashing Equipment: Marine
Double stacking marine twistlock (Galvanised) Left hand locking
Safe working load 25,000Kg GAVAN Code: MLT1-2L
Bridge fitting for horizontal container locking Galvanised with a safe working load of 5,000Kg
GAVAN Code: MLBF-1
220
90º
132mm
110m
m90
mm
115m
m
74mm
TWISTLOCK - MARINE
PART No: MLT4-1L
DOVETAIL TWISTLOCK LEFT HAND LOCKING. TWISTLOCK HOT DIPPED GALVANISED WEIGHT: 5.8KG SWL: 25 TON BL: 50 TONS
90º
175mm
(Left Hand Closed)
140m
m
170
PART No: MLDF-1A
BASE TO DOVETAIL TWISTLOCK CAST STEEL SAFE WORKING LOAD OF 25,000KG
Form 7:02:2013:14:47:46 Page 97 of 102
Dovetail twistlock (Galvanised)
Left hand locking Safe working load 25,000Kg
Gavan Code: MLT4-1L
Base to suit dovetail twistlock
Cast steel with a safe working load of 25,000Kg Gavan Code: MLDF-1A
146mm
3610
45º
181mm
PART No: MLBF-1
BRIDGE FITTING FOR HORIZONTAL CONTAINER LOCKING GALVANISED SAFE WORKING LOAD OF 5000KG
Version: 1.04 2015 AU Page 100 of 105
Lashing Equipment: Marine
Double stacking marine twistlock (Galvanised) Left hand locking
Safe working load 25,000Kg GAVAN Code: MLT1-2L
Bridge fitting for horizontal container locking Galvanised with a safe working load of 5,000Kg
GAVAN Code: MLBF-1
12
10.8
21.6
M34
300 (380)
TWISTLOCKS
29www.ancraaustralia.com
DUNNAGE BAGS
CARGO CARE
DISPOSABLE PAPER DUNNAGE AIR BAG2 PLY POLY WOVEN
4 PLY BUDGET RANGE BAGS
CC-DBAGFORKLIFT
FORKLIFT COMPRESSOR
Introducing the newest dunnage air bag inflation technology, the Forklift Inflator. It is easily installed on any forklift and is powered by the forklift battery. Once installed, simply flip the switch to fill dunnage air bags anywhere inside a trailer or container.
• Can be used on Lightweight airbags • Decreases load time • No air lines or air carts needed • No recharging or downtime • No dragging long air lines or air carts • Runs off forklift battery power
SPECIFICATIONS: Max Pressure 1.5 PSI Hose Length- 15 ft Unit Weight- 7.5 lbs
CC-DBAGGUN
DUNNAGE BAG INFLATION GUN BLACK S/FLOW SF1000
CC-DBAGP1X1 DUNNAGE BAG PAPER 2 PLY 900 X 1200MM
CC-DBAGP1X2 DUNNAGE BAG PAPER 2 PLY 900 X 2100MM
CC-DBAGP2X2 DUNNAGE BAG PAPER 2 PLY1200 X 2100MM
CC-DBAGP4PLY2 DUNNAGE BAG PAPER 4 PLY 900 X 2100MM (100)
CC-DBAGP4PLY3 DUNNAGE BAG 1200 X 2400MM 4PLY FF (75)
CC-DBAGPM4 DUNNAGE BAG MOA PAPER 1200 X 2200
CC-DBAGPPW1 DUNNAGE BAG POLY WOVEN 900 X 1200MM (500)
CC-DBAGPPW2 DUNNAGE BAG POLY WOVEN 900 X 2100 - 350
CC-DBAGPPW3 DUNNAGE BAG POLY WOVEN 1220 X 2140MM - 300
CC-DBAGV0 DUNNAGE BAG SAL PAPER 900MM X 1200MM
CC-DBAGV1 DUNNAGE BAG SAL PAPER 920MM X 2100MM (270)
CC-DBAGV2 DUNNAGE BAG SAL PAPER - 1220 X 2100MM
CC-DBAGGUN2
DUNNAGE BAG INFLATION GUN BLUE TURBO TF3000
Unparalleled dunnage airbag inflation speed and an innovative safety feature that significantly reduces inflation time and labor costs. Our inflator fills dunnage air bags faster than the industry standard.
The SuperFlow™ inflator offers a unique feature that prevents over-inflation. Once an airbag is has reached its optimal pressure, air automatically diverts through the back of the inflator, indicating to the user, that the airbag has reached its optimal PSI.
The industrial grade plastic body is built to withstand the wear and tear of a loading environment.
30CONTAINER PARTS CATALOGUE 2018 - 05
CARGO CARE
THE NORDIC DESICCANT BAG SADDLEBAG, PICCOLO & BLANKET
This NON-TOXIC desiccant bag protects your containerised cargo from moisture damage. It eliminates humidity related problems in shipment and storage.
• Protects powdered and packaged dairy goods from mold, mildew, solidifying, fungus, corrosion and rust caking caused by humidity.
• High Absorption rates - up to 2 times its own weight• Non-Toxic - approved to be used with food products• Reduces Cargo insurance claims• Fits into container corrugation grooves• Cargo protected for 3 months• Leak Proof 100%
Most desiccants on the market harm both the atmosphere and the environment through their disposal. The Nordic desiccant is ENVIRONMENTALLY FRIENDLY. All material is recyclable.
NORDIC
LIFE CYCLE
Coco PeatCaCl2
NATURAL RAW MATERIALS
Oil AbsorbantAnimal BeddingNordic GreenWeedicideDe-icerCaCl2 BrineLCM Material
RECYCLEDPRODUCTS
Nordic Green
FINISHEDPRODUCT
We help you to eliminate humidity related problems during the shipment and storage of your products and equipment.
Your containerised cargoes whilst in transit can undergo extreme variations in temperature and subsequent humidity variations. The swings in humidity can cause serious damaged due to mold, mildew, fungus, corrosion, rust caking and general product degradation. Nordic desiccants will control the humidity below the dew point to ensure the conditions giving rise to such damage do not occur.
No matter what your products are; agricultural, metal, electronics, furniture,
resins, canned food, detergents, we can protect your precious cargoes to ensure they arrive in same the condition that they were shipped, reducing subsequent cargo claims, saving you money and time.
Using Nordic Dry Desiccants will ensure that you continue to satisfy your customers by delivering goods to specification and free of damage, minimizing claims, while maximizing profits.
And above all, our solutions have been extensively tested and confirmed to be non-toxic and are 100% recyclable minimising impact upon health and the environment.
NONTOXIC
GUARANTEE
"Nordic Dry has been verified
to be 100% Non-Toxic by the
ALS Laboratory Service and
specifically free of Acrylamide,
which can be prevalent in
some starch based desiccants.
Nordic is approved for use in
all transportation of food and
agricultural products."
“Nordic Dry has been verified to be 100% Non-Toxic by the ALS Laboratory Service and specifically free of Acrylamide, which can be prevalent in some starch based desiccants. Nordic is approved for use in all transportation of food and agricultural products.”
FDA APPROVEDREGULATORY COMPLIANT
COST EFFECTIVE
NON TOXIC DESICCANTS
31www.ancraaustralia.com
ANCRA AUSTRALIA PTY LTD A.B.N. 13 006 379 826 250 GOVERNOR ROAD, BRAESIDE VIC 3195
TERMS AND CONDITIONS OF SALE
1. Exclusion of other Terms and Conditions: The following terms and conditions shall apply to the sale of all products by ANCRA Australia Pty. Ltd. (“the Company”) to the exclusion of any and all terms and conditions in any documents submitted to the Company by the Customer whether prior to or following the Customer’s receipt of these terms and conditions.
2. Basis of Acceptance of Quotation: All quotations verbal or written are based on information provided by the Customer (or by third parties on its behalf). Any extra cost or expense arising from incorrect information shall be paid by the Customer.
ThecompanywilluseitsbestendeavourstomeetspecifieddeliverydatesbuttheCompanywillbeundernoliabilityofanykind(whether for breach of contract, negligence or otherwise) for any delay in delivery from any cause.
3 Prices: Any quotation submitted or any price set out in any price list is based upon the cost of labour and materials current at the date of thepricelistorquotation.TheCompanymayatitsdiscretionincreaseanypriceatanytimetoreflectchangesinthecostoflabourandmaterials and manufacturing overheads.
4. Terms of Payment: Unless the Company in its discretion agrees to accept payment for products on other terms, the Customer shall pay for all products delivered by the Company within 30 days from the last day of the month in which the invoice is dated.
5. Literature and Suitability of Products: Advertising and other literature provided by the Company contains general information only and no such information forms part of any contract between the Company and the Customer. The Customer shall be responsible fordeterminingthefitnessoftheCompany’sproductsforthepurposeforwhichtheyareintendedforusebytheCustomer,andacknowledges that the Company is not aware of that purpose and that the Customer has not relied on the Company’s advice.
6. Claims:Allproductssoldwillbedeemedtobeofrequiredqualityandtypeunlessaclaimspecifyingparticularsofdeficienciesorincorrect type is received by the Company within 7 days after receipt of products by the Customer.
7. Returns and Cancellations: Orders can only be cancelled or products returned with the prior written agreement of the Company. Returns due to client error will incur a restocking charge of 15% of the invoice price. Products accepted for return must be despatched at the Customer’s cost.
8. Delivery: Cost of delivery from our store to the Customer’s nominated point will be at the Customer’s cost, unless prior arrangement to the contrary. Any delivery made by us in the Melbourne areas will incur a Delivery Fee in addition to the cost of the goods.
9. Insurance: Products supplied on an F.I.S. basis will be insured by the Company up to the point of receipt at the Customer’s nominated delivery address. Products supplied other than on an F.I.S. basis will be insured by the Customer from the point of despatch by the Company.
10.Title of Goods: Full legal and equitable title in each product supplied will remain vested in the Company until the Company has received payment in full of all amounts owing by the Customer to the Company on an account whatsoever. The Customer shall have the right to sell products in which title remains vested in the Company in the ordinary course of trade. Until title in the products passes to the Customer or the products passes to the Customer or the products have been sold by the Customer in the ordinary course of trade, the CustomeracknowledgesthatitisinpossessionoftheproductsolelyasfiduciarybaileefortheCompany,andinthatcapacity,willstorethe products separately from the Customer’s own goods and those of any other person, in a manner which renders the products purely identifiableasthepropertyoftheCompany.
(a) (iftheCustomerisacorporation)theCustomercommencestobewoundup,orisplacedunderofficialmanagement,orareceiverisappointed in respect of, or any encumbrancer takes possession of, its undertaking or property or any part thereof, of the Customer is unable to pay its debts; or
(b) (if the Customer is a natural person) the Customer becomes insolvent or bankrupt, or commits an act of bankruptcy or makes an assignmentforthebenefitofacreditororcreditors;or
(c) the Customer fails to pay the whole of any part of the purchase price or transport or other charges for any products supplied by the Company when due and payable.
11. TestCertificates:TestCertificateswillonlybesuppliedifrequestedatthetimeofordering.AtestcertificateissuedbytheCompanyinrespect of a product will not constitute a warranty by the Company as to the quality, suitability or characteristics of the product or the fitnessofthatproductforanypurpose.
12. Dimensions: Lengths and weights are subject to usual commercial tolerances.13. Suspension: If, at the Customer’s request, the Company suspends work the subject of an order for more than 30 days, the Customer
shall pay the Company for the work performed prior to the suspension, and for usual materials procured of the order, within 30 days of receipt of an invoice for such work and for materials from the Company.
14.1 Liability: The Company warrants that its products will be free of defects caused by the default or neglect of the Company. If any product supplied by the Company is defective, the Company’s liability in respect of such product will be limited to, at the Company’s sole discretion:-
(a) the replacement of the product of the supply of an equivalent product;(b) the payment of the cost of replacing the product or obtaining an equivalent product;(c) the repair of the product; or(d) the payment of the cost of repair of the product. Except as provided above, the Company will not be liable in any way whatsoever (whether in contract, negligence or otherwise) for
theinjury,loss,damage,claim,actionorproceedingsufferedorincurredbyormadeorbroughtagainsttheCustomeranddirectlyorindirectly cause or contributed to by a defective product, the Company’s negligence or any breach of contract.
14.2 Except as provided in this clause no warranty is given in respect of any product and the Customer acknowledges that no warranty has been given by on or behalf of the Company. All statutory warranties negatived to the maximum extent permitted by law.
15. Law: The law of Victoria shall apply to all contracts for the supply of products by the Company to the Customer. To the extent that any applicablelawofanyStateoroftheCommonwealthofAustraliawhichcannotbeexcludedaffectstheapplicabilityorvalidityofanyofthe foregoing conditions, the conditions shall be read and construed as being subject to such law.
16. Warranty: All ANCRA Australia Pty. Ltd products are warranted to be free from defects in material or workmanship for a period of three (3) months from date of shipment. During this period ANCRA Australia Pty. Ltd will at its option repair or replace without charge any products or part thereof found to be defective in material or workmanship. This warranty does not extend to any product which has been subject to misuse, abuse, negligence, accident, alteration or unauthorised repair. Goods supplied by us but manufactured by others will be warranted only to the extent of the manufacturer’s warranty. Defective products must be returned to ANCRA Australia Pty. Ltd 250 Governor Road, Braeside, Vic, 3195 within the above period, transportation prepaid, ANCRA Australia Pty. Ltd will bear the cost of return transportation.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL ANCRA AUSTRALIA PTY. LTD. BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF VEHICLE, CARGO OR PROFITS.
ANCRA TERMS & CONDITIONS
VICTORIA (HEAD OFFICE)Freecall: 1800 4 26272 P: +61 3 9587 6700 F: +61 3 9587 1977 A: 250 Governor Road, Braeside VIC 3195
E: [email protected] W: www.ancraaustralia.com twitter.com/@ancraaustralia facebook.com/ancraaustralia
Flooring & Accessories I Door Parts Container Panels I Container Accessories & more
V 1 C P 2 0 1 8 / 0 5