anchor die sets · 2020. 5. 28. · 3. standard die sets. mild steel plate – stress relieved upon...
TRANSCRIPT
-
1
w w w . anchordanly. c o m Check our website for the latest technical information.
TM
Die SetsTM
-
2
TABLE OF CONTENTSIntroduction .................................................................................................................... 2PLAIN BEARING DIE SETSStandard Die Sets .......................................................................................................... 3Econoline Die Sets ........................................................................................................ 4Economy Die Sets ......................................................................................................... 5Back Post Die Sets ....................................................................................................... 6 & 7Center Post Die Sets .................................................................................................... 8Diagonal Post Die Sets ................................................................................................ 9Four Post Die Sets........................................................................................................ 10 & 11BALL-BEARING DIE SETSBall-Bearing Die Set Operating Data & Design Selection .......................................... 12Standard Die Sets .......................................................................................................... 13Two Post Die Sets .......................................................................................................... 14Four Post Die Sets......................................................................................................... 15
Anchor Danly provides die sets to the metalworking industry throughout Canada, the United States and Europe. We are proud of the fact that we supply our die sets to the Automo-tive, Metal Stamping, Farm Implement and Home Appliance sectors as well as Electronics and Hardware.
Anchor Die Sets constructs standard models in steel or aluminum and we welcome specials. Anchor can build die sets from 4” wide x 4” long to 120” wide x 360” long.
Steel plates are also offered through the Die Set group.
TM
2 Die SetsTM
-
3
STANDARD DIE SETS
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
Lamina Pins & Bronze Plated Clamp Type Bushings
STOCKED FOR PROMPT SHIPMENTPrices available on request – F.O.B. our Plant
Sales tax extra if applicable
LC
A1/2 A
B
W
SPECI -
H
D.H.
Special thickness can be supplied for an additional charge.
Welded shank available, price on request.
SHANKS AVAILABLE 11/2 dia. x 21/8 (11/4-12 NF) 2 dia. x 27/8 (11/4-12 NF) 21/2 dia. x 27/8 (11/2-12 NF) 3 dia. x 3 (11/2-12 NF)
When Ordering Specify:1. Type Standard2. Dimensions A & B3. Thickness P.H. and D.H.4. Length of Pins5. Size and location of Shank if required6. Bushings if other than standard
S
A B C S W L .H.P .H.D .H niP .aiDniP.neL thgieW
3 3 331 / 61
41/2 51/2 1 11/4 11/4 3/4SPECIFY
WHEN
ORDERING
513 4 4 45/8 65/8 1 11/4 11/4 3/4 024 4 4
11/ 61
55/8 65/8 1 11/4 11/4 3/4 524 6 6 6 9 11/4 11/2 11/4 1 044 8 8 6 11 11/4 11/2 11/4 1 055 5 5 7 8 11/4 11/2 11/4 1 545 7 7 7 01 11/4 11/2 11/4 1 555 9 9 7 21 11/4 11/2 11/4 1 566 6 6 8 9 11/4 11/2 11/4 1 556 8 8 8 11 11/4 11/2 11/4 1 076 01 01 81/4 31 1/4 11/2 13/4 11/2 11/4 0017 7 7 91/4 01 1/4 11/4 11/2 11/2 11/4 577 9 9 91/4 21 1/4 11/2 13/4 11/2 11/4 5018 8 8 01 1/4 11 1/4 11/2 13/4 11/2 11/4 0218 01 01 01 1/4 31 1/4 11/2 13/4 11/2 11/4 521
SNOITACIFICEPSRUOYOTELBALIAVASEZISREHTO
1” Typical
TM
3 Die SetsTM
-
4
EZIS NIP.aiD
.H.P .H.DTHGIEW
.H.P .H.DTHGIEW
.H.P .H.DTHGIEW
.H.P .H.DTHGIEW
A B 11/2 11/2 11/2 2 2 11/2 2 2
6
8
11/2 051 051
06
051 002
07
002 051
07
002 002
0801 57 09 09 00121 09 501 501 02141 501 021 021 04181 531 061 061 081
8
8
11/2 051 051
57
051 002
58
002 051
58
002 002
00101 59 011 011 52121 011 031 031 05141 031 051 051 57181 071 591 591 022
01
01
11/2 051 051
011
051 002
521
002 051
521
002 002
05121 531 551 551 08141 551 081 081 50281 502 532 532 072
2121
11/2 051 051061
051 002581
002 051581
002 002012
41 581 512 512 54281 532 572 572 513
4141
11/2 051 051012
051 002042
002 051042
002 002572
81 072 013 013 553
F
F
A
B
SPECIFY
H
P.H.
ECONOLINE DIE SETS
ECONOLINE Die Sets are a high grade com-mercial die set suitable for most precision requirements.
ECONOLINE Die Sets are completely assem-bled before shipment.
ECONOLINE Die Sets are equipped with Lam-ina Bronze Plated Press Fit Shoulder Busings complete with grease fittings and steel guide pins hardened and ground.
ECONOLINE Die Sets are torch-cut from Prime Plate and Blanchard ground.
LENGTH OF GUIDE PINS AVAILABLE:
5, 5-1/2, 6, 6-1/2, 7, 7-1/2 or 8” long at no extra charge.
Longer lengths available.
“F” Dimension is 2-1/2” with 1-1/2” diameter pins.
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF) 21/2” dia x 27/8 (1-1/2-12 NF) 3” dia. x 3 (1-1/2-12 NF)
When ordering specify:1. Type ECONOLINE2. Dimension A & B3. Thickness P.H. and D.H.4. Pin Length5. Size and location of Shank if required
Prices available on request – F.O.B. our plant
Sales tax extra if applicable
¢
¢
Mild Steel Plate
4
TM
Die SetsTM
-
5
C
P.H.
D.H.
SPECIFY
A
1/2 A
W
BL
A B C L W .H.P .H.D niP .aiDniPhtgneL
.xorppAthgieW
4 6 31/2 8 53/4 11/4 11/4 1 SPECIFY
sbl53
6 6 31/2 8 73/4 11/4 11/4 1 sbl54
6 8 51/2 01 73/4 11/4 11/4 1 sbl55
ECONOMY DIE SETS are presently utilized in numerous applications within the Die Making Industry.
Lamina Guide Pins...Hardened and ground
Lamina Bronze Plated Busings ...Press Fit Type with grease fitting
Torch cut from Prime Steel Plate, Blanchard ground and bored (not reamed) to produce an accurate economical Die Set
Length of Guide Pinsavailable:5, 5-1/2, 6, 6-1/2, 7 or 8” longAt no extra chargeLonger lengths available
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF)
When ordering specify:1. Type Economy2. Dimension A & B3. Pin Length4. Shank diameter if required
ECONOMY DIE SETSMild Steel Plate
Prices available on request – F.O.B. our plant
Sales tax extra if applicable
¢
¢
5
TM
Die SetsTM
-
6
snoisnemiDP 1 11/4 11/2 13/4 2 21/2 3F 2 21/4 21/2 3 31/4 33/4 41/2H 11/4 11/2 11/2 11/2 11/2 2 2
B8 01 21 41 61 81 02 22 42 62 82 03 23
A
6 02 52 03 53 04 54 05 55 06 56 07 57 088 52 03 53 04 05 55 06 07 57 08 58 09 5901 03 53 54 05 06 07 57 58 09 59 001 511 02121
11/2"sniP
05 06 07 08 58 59 001 011 021 031 04141 07 08 58 09 501 021 031 041 051 06161 58 59 011 021 531 541 551 071 08181
13/4 sniP"011 521 531 541 061 571 581 002
02 531 051 561 571 091 502 51222 061 571 091 502 022 53242 091 502 522 042 55262 022 042 552 57282
sniP"2552 572 592
03 092 01323 53343
21/2 sniP"6383042444 htiwgnidahsruolocybdepuorgerasezisecapseiD
.sretemaidsnipediugdetseggus
elgnisafothgiewetamixorppaehtetacidnisrebmunxoB .kciht"1etalp
6484
F
F
A
B
SPECIFY
H
P
P.H.
D.H.
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
BACK-POST DIE SETSType B2
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF) 21/2” dia x 27/8 (1-1/2-12 NF) 3” dia. x 3 (1-1/2-12 NF)
Special Die Sets are manufactured in any size or shape to your specifications.
Prices available on request – F.O.B. our plant
Sales tax extra if applicable
Type B2 Die Sets are made to order and may not be returned for credit.
¢
¢
¢
When ordering specify:1. Type B22. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard
¢
6
TM
Die SetsTM
-
7
B43 63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67 87 08 28 48
58 09 59 001 501 511 021 521 031 531 041 541 051 061 071 571 081 581 091 591 002 502 022 032 532 042 6
A
011 511 021 031 531 041 051 551 061 071 571 581 091 591 502 012 512 522 032 532 542 052 072 572 082 092 8031 041 541 551 561 071 081 581 591 002 012 512 522 032 042 052 552 562 072 082 582 592 513 023 033 043 01051 061 071 081 581 591 502 512 522 032 042 052 062 072 572 582 592 503 013 023 043 053 063 073 083 21071 081 091 002 012 022 032 042 052 062 072 582 592 503 513 523 533 543 553 563 583 593 504 514 524 41091 502 512 522 532 052 062 072 082 592 503 513 523 043 053 063 073 583 593 504 034 044 054 064 574 61012 522 532 052 062 572 582 003 013 523 533 053 063 573 593 504 024 534 544 064 074 584 594 015 81032 542 062 072 582 003 513 523 043 553 563 083 593 014 034 544 064 574 584 005 515 035 045 555 02052 562 082 592 013 523 043 553 573 093 504 024 534 054 564 084 594 515 035 545 065 575 095 506 22072 582 503 023 533 053 573 093 504 024 044 554 074 584 505 025 535 055 075 585 006 516 536 056 42092 013 523 043 063 573 004 024 534 554 074 094 505 525 045 555 575 095 016 526 546 066 086 62013 033 543 563 583 004 524 544 564 584 005 025 045 065 575 595 516 036 056 076 096 507 527 82033 053 073 093 514 534 554 574 594 515 535 555 575 595 516 036 056 076 096 017 037 057 03553 573 004 024 044 064 084 005 525 545 565 585 506 036 056 076 096 017 537 557 577 597 23573 004 024 044 564 584 015 035 555 575 595 026 046 566 586 507 037 057 577 597 028 43
024 044 564 094 015 535 065 085 506 036 056 576 007 027 547 077 097 518 048 068 63564 094 515 045 065 585 016 536 066 586 017 537 067 087 508 038 558 088 83
015 045 565 095 516 046 566 096 517 547 077 597 028 548 078 598 029 04075 006 526 556 086 017 537 067 097 518 548 078 009 529 559 24
sniP"3526 556 086 017 047 567 597 528 058 088 019 539 569 44
086 017 047 077 008 038 068 588 519 549 579 64047 077 008 038 068 098 029 559 589 5101 84
Anchor Die Sets are equipped with Lamina Clamp-Type Bronze-Plated
Shoulder Bushings
BACK-POST DIE SETSType B2, cont.
7
TM
Die SetsTM
-
8
snoisnemiDP 1 11/4 11/2 13/4 2 21/2 3F 2 21/4 21/2 3 31/4 33/4 41/2H 11/4 11/2 11/2 11/2 11/2 2 2
B8 01 21 41 61 81 02 22 42 62 82 03 23
A
6 02 52 03 03 53 04 54 05 05 55 06 06 568 03 53 04 54 05 55 06 56 07 57 08 58 5801 54 05 55 06 07 57 08 58 09 001 501 01121 11/2 dna" 06 07 57 08 09 59 501 511 021 521 53141 13/4 sniP" 08 09 59 501 011 521 031 041 051 06161 001 011 521 031 041 051 561 571 08181 13/4 dna" 521 041 051 061 571 581 591 50202 sniP"2 551 561 081 591 502 512 03222 581 002 012 522 042 05242 512 032 542 062 57262 2&"2 1/2 sniP" 052 562 082 59282 582 503 02303 523 04323 5734363830424 gnidahsruolocybdepuorgerasezisecapseiD
.sretemaidsnipediugdetseggushtiw
afothgiewetamixorppaehtetacidnisrebmunxoB.kciht""1etalpelgnis
446484
CENTER-POST DIE SETSType C2
Mild Steel Plate – Stress Relieved upon Re-quest
Also available in 4140 steel and Aluminum
1-1/4” & 1-1/2” Pins
When ordering specify:1. Type C2 or D22. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard
A
B F
D D+
Between Pins
SPECIFY
H
P
P.H.
D.H.
CENTER PINS, Type C2
DIAGONAL PINS, Type D2
A
F
F
D
D+
BBetween Pins
SPECIFY
H
P
P.H.
D.H.
8
TM
Die SetsTM
-
9
B43 63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67
07 07 57 08 58 09 09 59 001 001 501 011 511 511 021 251 031 031 531 041 041 541 6
A
59 001 501 011 511 511 021 521 031 041 041 541 051 551 061 561 071 571 081 581 091 591 8
021 521 031 531 541 051 551 061 561 071 081 581 091 51 002 012 512 022 522 032 532 542 01
541 051 061 561 071 081 581 591 002 502 512 022 032 532 042 052 552 562 072 572 582 092 21
071 571 581 091 002 012 512 522 532 042 052 062 562 572 582 092 003 503 513 523 533 41
091 002 012 022 032 042 052 552 562 572 582 592 503 513 523 033 043 053 063 073 583 61
512 522 532 542 062 072 082 092 003 013 023 033 046 553 073 083 093 004 014 524 534 81
042 052 562 572 582 003 013 023 043 553 563 573 093 004 014 524 534 544 064 074 02
562 572 092 003 513 033 053 063 573 093 004 514 524 044 054 564 084 094 505 515 22
092 003 513 033 543 063 083 593 014 524 534 054 564 084 594 015 025 535 055 565 42
013 523 043 063 573 093 514 034 544 064 574 094 505 025 535 055 565 085 595 016 62
533 053 073 583 004 024 544 064 574 594 015 525 545 065 575 095 016 526 046 82
063 573 593 514 044 064 574 594 015 035 545 565 085 006 516 536 056 076 586 03
593 514 534 054 074 094 015 525 545 565 585 006 026 046 066 576 696 517 23
024 044 064 084 005 025 045 065 085 006 026 046 066 086 007 027 047 067 43
064 584 015 035 055 075 595 516 536 556 576 007 027 047 067 587 508 63
515 535 065 085 506 526 056 076 596 517 537 067 087 508 528 83
565 095 016 536 066 086 507 037 557 577 008 528 548 04
026 046 566 096 517 047 567 097 518 048 568 098 24
21/2 sniP"3dna" 576 007 527 057 577 008 528 558 088 509 44
037 067 587 018 048 568 098 029 549 64
097 028 548 578 509 039 069 84
DIAGONAL-POST DIE SETSType D2
Anchor Die Sets are equipped with Lamina Clamp-Type Bronze-Plated
Shoulder Bushings
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF) 21/2” dia x 27/8 (1-1/2-12 NF) 3” dia. x 3 (1-1/2-12 NF)
nSpecial Die Sets are manufactured in any size x or shape to your specifications.
nPrices available on request – F.O.B. our plant
nSales tax extra if applicable
nType C2 and D2 Die Sets are made to order and may not be returned for credit.
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
9
TM
Die SetsTM
-
10
snoisnemiDP 1 11/4 11/2 13/4 2 21/2 3F 2 21/4 21/2 3 31/4 33/4 41/2H 11/4 11/2 11/2 11/2 11/2 2 2
B01 21 41 61 81 02 22 42 62 82 03 23 43
A
6 51 02 52 03 03 538 52 03 03 53 04 54 05 55 06 56 0701 03 53 04 54 05 06 56 07 57 08 58 59 00121 04 05 55 56 07 57 58 09 001 501 011 02141 55 56 57 08 09 001 501 511 521 031 04161 57 58 59 501 011 021 031 041 051 06181 11/2 sniP" 59 501 511 521 531 541 061 071 08102 511 031 041 051 561 571 581 00222 041 551 561 081 591 502 02242 071 081 591 012 522 04262 11/4 sniP" 002 512 032 542 06282 032 542 062 08203 562 082 00323 003 02343 sniP"2 043638304
gnidahsrolocybdepuorgerasezisecapseiD.sretemaidsnipediugdetseggushtiw
thgiewetamixorppaehtetacidnisrebmunxoB.kciht"1etalpelgnisafo
2444648405
FOUR-POST DIE SETSType R4
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
F
F
A
B
SPECIFY
H
P
P.H.
D.H.
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF) 21/2” dia x 27/8 (1-1/2-12 NF) 3” dia. x 3 (1-1/2-12 NF)
When ordering specify:1. Type R42. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard
1” Pins 11/4” Pins
nRight front guide pin is offset .25” to prevent x accidental reversing
nSpecial Die Sets are manufactured in any size or shape to your specifications
nPrices available on request – F.O.B. our plant
nSales tax extra if applicable
nR4 Die Sets are made to order and may not be returned for credit
10
TM
Die SetsTM
-
11
B63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67 87 08 28
6
A
8501 011 511 521 031 531 041 541 051 061 561 071 571 081 581 591 002 502 012 512 022 032 532 042 01521 531 041 541 551 061 071 571 081 091 591 502 012 512 522 032 042 542 552 062 562 572 082 092 21541 551 561 071 081 091 591 502 512 022 032 532 542 552 062 072 082 582 592 503 013 023 033 533 41071 081 581 591 502 512 522 532 542 552 062 072 082 092 003 013 023 033 533 543 553 563 573 583 61091 002 012 022 032 042 552 562 572 582 592 503 513 523 533 053 063 073 083 093 004 014 024 034 81012 022 532 542 552 072 082 592 503 513 033 043 053 563 573 583 004 014 024 534 544 554 074 02032 542 552 072 582 592 013 023 533 053 063 573 583 004 014 524 044 054 564 571 094 005 515 22552 562 082 592 013 523 533 053 563 083 593 504 024 534 054 564 084 094 505 025 535 055 065 42572 092 503 023 533 053 563 083 593 014 524 044 554 074 584 005 025 535 055 565 085 595 016 62592 013 033 543 063 573 593 014 524 544 064 574 094 015 525 045 555 575 095 506 526 046 82513 533 053 073 583 504 024 044 554 574 094 015 525 545 065 085 595 516 036 056 076 586 03533 553 573 593 014 034 054 074 584 505 525 545 065 085 006 026 536 556 576 596 017 037 23063 083 004 024 044 064 084 005 025 535 555 575 595 516 536 556 576 047 517 537 557 43083 004 024 544 564 584 505 525 055 075 095 016 036 556 576 596 517 087 076 087 008 63
524 544 564 094 015 535 555 085 006 526 546 076 096 017 537 557 028 008 528 83074 094 515 045 065 585 016 036 556 086 507 527 057 577 597 068 548 568 04
515 045 565 095 516 046 566 096 517 047 067 587 018 538 009 588 24565 595 026 546 076 596 027 547 577 008 528 058 578 549 44
21/2" 026 546 576 007 527 557 087 018 538 068 098 519 64576 007 037 067 587 518 548 078 009 039 559 84
037 067 097 028 058 088 019 539 569 05
FOUR-POST DIE SETSType R4, cont.
Anchor Die Sets are equipped with Lamina Clamp-Type Bronze-Plated
Shoulder Bushings
Anchor will build die sets up to 120” wide x 360” long.
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
11
TM
Die SetsTM
-
12
OPERATING DATA & DESIGN SELECTIONIn component selection varied characteristics must be taken into consideration when selecting length of guide post, bushing and ball-bearing retainer, such as stroke, shut height and type of operation. To help in your se-lection we have supplied engineering data and instructions that should be used as a guide when making your component selection. The following conditions should be considered for the most effective performance in a specific application.
PRE-LOAD RELIEVED AT TOP OF STROKE
FULL DISENGAGEMENT
In this condition the guide post, bush-ing and ball-bearing retainer remain in full contact throughout the stroke cycle. This selection is beneficial and recommended for high speed, high production, short stroke dies.
This may be accomplished by select-ing the guide post bushing length that allows the guide post to disengage the bushing at the beginning of the stroke or cycle. This will result in the loss of pre-load while the ball retainer is still within the bushing. This condition may be utilized with long stroke dies. It also provides safe operation by eliminating pinch points and prevents foreign ma-terials from entering the bushing. A further benefit is it allows for re-registra-tion of the ball retainer on each stroke. Removal of the punch holder or die holder from press is possible without total removal of dies.
This condition is permissable when the ball retainer must totally disengage the bushing on applications requiring long strokes. Safety precautions (as outlined on page 12) should always be taken when employing this method.
It should also be noted that the above illustration depicts the proper way to assemble (insert) the guide post and ball-bearing retainer into the bushing.
When in a pre-loaded (rolling press fit) condition, the ball retainer will travel half the distance of movement. In a die set application it would be half the distance of the press stroke.
FULL CONTACT PRE-LOAD
BALL BEARING ASSEMBLY LUBRICATION RECOMMENDATION
In operation of ball assembly, add lubricant once each 8-hour shift by spray or brush application. Use a light-weight spindle oil like Lamina Ball Lube.
NEVER USE GREASE
Ball-Bearing
12
TM
Die SetsTM
-
13
When ordering specify:1. Type “Standard”2. Dimension A & B3. Thickness P.H. and D.H.4. Minimum Shut Height5. Stroke of Press6. Size and location of Shank if required
A B C D E L S W .H.P .H.DNIP
.aiD htgneL31/2 6 6 4 2 9
31 / 61
6 11/4 11/2 1
DEPENDS
ON
SHUT
HEIGHT
&
STROKE
31/2 01 01 8 2 31 6 11/4 11/2 141/2 5 5 3 21/2 8 7 11/4 11/2 141/2 9 9 7 21/2 21 7 11/4 11/2 141/2 31 31 01 1/2 21/2 61 1/2 71/2 11/2 13/4 11/451/2 6 6 4 3 9
11/ 61
8 11/4 11/2 151/2 8 8 6 3 11 8 11/4 11/2 151/2 01 01 71/2 3 31 1/2 81/2 11/2 13/4 11/461/2 7 7 41/2 31/2 01 1/2 93/8 11/4 11/2 11/461/2 9 9 61/2 31/2 31 93/4 11/2 13/4 11/461/2 11 11 81/2 31/2 41 1/2 91/2 11/2 13/4 11/461/2 31 31 01 1/2 31/2 61 1/2 91/2 11/2 13/4 11/471/2 8 8 51/2 4 11 1/2 01 1/2 11/2 13/4 11/471/2 01 01 71/2 4 31 1/2 01 3/8 11/2 13/4 11/471/2 21 21 91/2 4 51 3/8 01 1/2 13/4 2 11/481/2 9 9 61/2 41/2 21 1/2 11 3/8 11/2 13/4 11/481/2 11 11 81/2 41/2 41 1/2 11 1/2 13/4 2 11/481/2 31 31 01 1/4 41/2 61 3/4 11 3/4 13/4 2 11/281/2 51 51 21 1/4 41/2 91 21 13/4 2 11/291/2 8 8 51/2 5 11 1/2 21 1/2 11/2 13/4 11/491/2 01 01 71/2 5 31 1/2 21 3/8 13/4 2 11/491/2 21 21 91/4 5 61 31 13/4 2 11/211 1/2 8 8 51/4 6 11 3/4 41 5/8 13/4 2 11/211 1/2 01 01 71/4 6 31 3/4 41 3/4 13/4 2 11/211 1/2 21 21 91/4 6 51 3/4 41 3/4 2 21/4 11/211 1/2 51 51 21 1/4 6 81 3/4 41 3/4 2 21/4 11/2
SNOITACIFICEPSRUOYOTELBALIAVASEZISREHTO
Anchor Ball-Bearing Die Sets are made to traditionally high manufacturing requirements which have determined quality standards in the die set industry.
Lamina Components’ Precision Retainer is made of heat-treated aluminum alloys with chrome alloy steel balls.
Lamina Components’ Guide Posts and Bush-ings are manufactured to rigid standards using the highest quality steel alloys.
SHANKS AVAILABLE 11/2” dia. x 21/8 (1-1/4-12 NF) 2” dia. x 27/8 (1-1/4-12 NF) 21/2” dia x 27/8 (1-1/2-12 NF) 3” dia. x 3 (1-1/2-12 NF)
LC
A
E
B
S
W
P
D.H.
SPECIFYSHUT HEIGHT
STANDARD BALL-BEARING DIE SETSMild Steel Plate – Stress Relieved upon Request
Also available in 4140 steel and Aluminum
D
13
TM
Die SetsTM
-
14
When ordering specify:1. Type “Standard”2. Dimension A & B3. Thickness P.H. and D.H.4. Minimum Shut Height5. Stroke of Press6. Size and location of Shank if required
TWO POST BALL-BEARING DIE SETS
OK
J
Daylight¼”
Max.BushingHeight
ShutHeight
OpenHeight
F C
CF
A
B
BACK POSTStyle BB-B-2
K
J
O
C C
A
F F
CENTER POSTStyle BB-C-2
BBetween Bushings*
C
C
A
C
BBetween Bushings*
DIAGONAL POSTStyle BB-D-2
FF
SNOITAIRAVLANOISNEMIDTSOPEDIUG 1 11/4 11/2 13/4 2 21/2 3
F 23/8 27/8 31/4 31/2 4 41/2 51/8C 11/2 13/4 2 21/8 23/8 25/8 3
SNOISNEMIDMUMINIMDETSEGGUSNEHW "11ot6=B "71ot21=B "32ot81=B "92ot42=B=A J K O P J K O P J K O P J K O P"8ot6 11/2 11/2 11/4 1 11/2 11/2 11/4 1 11/2 11/2 11/2 11/4 11/2 11/2 11/2 11/4"11ot9 11/2 11/2 11/2 11/4 11/2 11/2 11/2 11/4 13/4 13/4 13/4 11/2 13/4 13/4 13/4 11/2"71ot21 13/4 13/4 13/4 11/2 2 2 2 13/4 2 2 2 13/4"32ot81 2 2 2 13/4 21/2 21/2 21/2 2"92ot42 21/2 21/2 21/2 2"44ot03
"06ot54
NEHW "44ot03=B "96ot54=B "001ot07=B=A J K O P J K O P J K O P"8ot6 13/4 13/4 13/4 11/2 2 2 2 13/4 2 2 2 13/4"11ot9 2 2 2 13/4 2 2 2 13/4 2 2 2 13/4"71ot21 21/2 21/2 21/2 2 21/2 21/2 21/2 2 21/2 21/2 21/2 2"32ot81 21/2 21/2 21/2 2 21/2 21/2 21/2 2 21/2 21/2 21/2 2"92ot42 21/2 21/2 21/2 2 3 3 3 21/2 3 3 3 21/2"44ot03 3 3 21/2 2 3 3 3 21/2 3 3 3 21/2"06ot54 3 3 3 21/2 31/2 31/2 3 21/2
BB-B-2 BB-C-2
BB-D-2
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
*Two pin sizes used to prevent reversing
14
TM
Die SetsTM
-
15
When ordering specify:1. Type “Standard”2. Dimension A & B3. Thickness P.H. and D.H.4. Minimum Shut Height5. Stroke of Press6. Size and location of Shank if required
FOUR POST BALL-BEARING DIE SETS
F C
F
A
B
FOUR POSTTYPE
BB-R-4
C
O
K
J
Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum
Special Die Sets are manufactured in any size or shape to your specifications.
SNOISNEMIDMUMINIMDETSEGGUSNEHW B "11ot6= B "71ot21= B "32ot81= B "92ot42==A J K O J K O J K O J K O"8ot6 11/4 1 1 11/2 1 11/4 11/2 11/4 11/2 11/2 11/4 13/4"11ot9 11/2 1 1 11/2 11/4 11/4 11/2 11/4 11/2 13/4 11/2 13/4"71ot21 11/2 11/4 11/4 13/4 11/2 11/2 13/4 11/2 13/4"32ot81 13/4 11/2 11/2 2 13/4 13/4"92ot42 2 13/4 13/4"44ot03
"06ot54
NEHW B "44ot03= B "96ot54= B "001ot07==A J K O J K O J K O"8ot6 13/4 11/2 2 2 11/2 2"11ot9 13/4 11/2 2 2 11/2 2 21/2 13/4 21/2"71ot21 2 13/4 2 21/2 13/4 2 21/2 2 21/2"32ot81 2 13/4 2 21/2 13/4 2 3 2 21/2"92ot42 21/2 2 2 21/2 2 2 3 2 21/2"44ot03 21/2 2 2 3 2 2 31/2 21/2 21/2"06ot54 3 2 2 31/2 21/2 21/2
BB-R-4
nRight front guide pin is offset .25” to prevent accidental reversing
nSpecial Die Sets are manufactured in any size or shape to your specifications
nPrices available on request – F.O.B. our plant
nSales tax extra if applicable
nR4 Die Sets are made to order and may not be returned for credit
15
TM
Die SetsTM
-
16021-06/13
Committed to Quality & Customer Satisfaction
Anchor Lamina is committed to be the “customer focused” world-class supplier of choice to the metal-working and plastics forming industry.
We will help our customers to compete globally by pro-viding innovative and value added products and services.
Anchor Die Sets
2590 Ouellette Avenue, Windsor, ON, Canada N8X 1L7Tel: 519-966-4431, 800-265-5007; Fax: 519-966-3594
E-mail: [email protected]
1450 Alphonse D-Roy, Montreal, QC, Canada H1W 2K8Tel: 514-525-5560, 800-263-5560; Fax: 514-525-7835
E-mail: [email protected]
311 Pinebush Road, Cambridge, ON, Canada N1T 1B2Tel: 519-740-3060, 800-265-7842; (Canada only); Fax: 519-740-8213
E-mail: [email protected]
Detroit, MI USATel: 248-547-5910, 800-543-3790; Fax: 248-547-5918, 800-963-0400
E-mail: [email protected]
4300 40th Street, S.E., Grand Rapids, MI USATel: 616-949-8700, 888-526-2467; Fax: 616-949-9580
E-mail: [email protected]
www.anchordanly.com
TM
Anchor Die SetsTable of ContentsIntroductionPlain Bearing Die SetsStandard Die SetsEconoline Die SetsEconomy Die SetsBack Post Die SetsCenter Post Die SetsDiagonal Post Die SetsFour Post Die Sets
Ball-Bearing Die SetsBall-Bearing Die Set Operating Data & Design SelectionStandard Die SetsTwo Post Die SetsFour Post Die Sets
Contact Information