analog positioner ep 2009/ebroweb/pdfs... analog positioner ep 100 the analog positioner ep 100 with

Download ANALOG POSITIONER EP 2009/EbroWeb/Pdfs... ANALOG POSITIONER EP 100 The analog Positioner EP 100 with

Post on 22-Jan-2021

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • ANALOG POSITIONER EP 100

    The analog Positioner EP 100 with analog input 4 ... 20 mA is designed to operate pneumatic valve actuators. It offers an easy adjustment by means of switches and potentiometers. The modular structure of this positioner series enables conversion from an analog to a „digital“ or „intelligent“ positioner by exchanging the electronics.

    TECHNICAL FEATURES • Configuration by means of switches and potentiometers • Load 300 Ohm • Low air consumption • Stroke 8 to 120 mm (0.3 to 4.7 inch) • Angle range up to 95 ° • Supply air pressure up to 6 bar (90 psig) • Single or double acting • Mechanical travel indicator • Reverse polarity protection • Attachment to stroke actuators directly or according to

    IEC 534 part 6 (NAMUR) • Attachement to rotary actuators according to VDI/VDE 3845 • Protection class IP 65 and NEMA 4X

    4.3 EP 100

    EXPLOSION PROTECTION: • EEx ia IIC according to CENELEC or „Inrinsic safety“ according

    to FM and CSA • Integrated inductive limit switches, independent of device

    electronics

    ACCESSORIES e.g.: • Gauge attachement for supply air and outputs • Booster relay

  • www.ebro-armaturen.com post@ebro-armaturen.com

    03.2002 PDF

    ANALOG POSITIONER EP 100

    INPUT

    Two-wire system

    Reverse polarity protection...... feature

    Signal range......................... 4 - 20 mA

    Operating range....................3 -21,5 mA

    Voltage.................................DC 6 - 42 V

    Load.....................................300 Ω 6 V at 20 mA

    SUPPLY

    Supply air pressure................1,4 - 6 bar (20- -90 psig)

    Supply air............................. entsprechend IEC 654-2

    CONFIGURATION

    with switches:

    Rotation................................ clockwise or counter clockw.

    Input signal........................... 4 - 20 mA (direkt) 20 - 4 mA (inverse)

    Split range1) 2)........................ 4 - 12 mA, 12 - 20 mA 20 - 12 mA, 12 - 4 mA

    with potentiometers:............... Zero (ZERO) Span (S) Gain (G) Damping

    RESPONSE CHARACTERISTIC

    Sensitivity..............................0,2 % of travel span

    Non-linearity......................... ≤ ± 0,8 % of travel span

    Hysteresis............................. ≤ ± 0,5 % of travel span

    Temperature effect..................≤ ± 0,5 %/10 K

    Supply air dependence...........≤ 0,3 %/1 bar (15 psi)

    Mechanical vibration 10 - 60 Hz up to 0,14 mm, 60 - 500 Hz up to 2g.............≤ 0,25 % of travel span

    AMBIENT CONDITIONS

    Operating conditions acc. to IEC 654-1.................. the device can be operated

    at a classe Dx location

    Ambient temperature.............. –40 … 80°C (–40 to 176°F) (devices before rev 0.1........ –20 … 80°C (–4 to 176°F))

    Relative humidity....................≤ 100 %

    Transport and storage Ambient temperature............ –40 … 80°C (–40 to 176°F) Storage conditions according to IEC 60721-3-1: 1K5; 1B1; 1C2; 1S3; 1M2

    Protection class according to IEC 529.............IP 653)

    according to NEMA............... Type 4X3)

    1) The digital positioner SRD992 offers enlarged functionality 2) At maximum rotation angle range of 30 degrees

    (± 15 degrees around center position of feedback lever). Split range is not available for actuators with a swivel range > 30 degrees

    3) Under services as directed

    http://www.ebro-armaturen.com

  • 4.3 MSK

    SWITCH BOX MSK (SIZE I)

    FEATURES - A compact, robust switch box to be mounted on pneumatic actuators

    - Position response via integrated micro limit switches

    - Integrated terminal Strip

    - The micro limit switches are adjusted in „open“ and „close“ position of the valve

    - Body: Aluminium (Powder coated)

    - Protection Class: IP 65 acc. to DIN 40050

    - Micro Switches: Marquardt Type M 1006.0701

    - Voltage: 10 - 60 V DC

    - Ambient Temperature: -25°C to +70°C

    - Constant Current: 200 mA

    - Screwed Cable Gland: 1 x PG 13,5 (1 x PG 13,5 optional) 1 x PG 9

    ADVANTAGES 1) Captive Screws to simplify adjustments on site

    2) Wiring Diagram within the cover

    3) Integrated Seal ➔ Protection Class IP 65

    4) Plastic brackets to keep the cover in position

    5) Integrated terminal strip

    1

    2 3

    4

    5

  • 4.3 NSK

    SWITCH BOX NSK (SIZE I)

    FEATURES - A compact, robust switch box to be mounted on pneumatic actuators

    - Position response via integrated proximity switches

    - Integrated terminal Strip

    - The proximity switches are adjusted in „open“ and „close“ position of the valve

    - Body: Aluminium (Powder coated)

    - Protection Class: IP 65 acc. to DIN 40050

    - Voltage: 10 - 60 V DC

    - Ambient Temperature: -25°C to +70°C

    - Constant Current: 200 mA

    - Screwed Cable Gland: 1 x PG 13,5 (1 x PG 13,5 optional) 1 x PG 9

    ADVANTAGES 1) Captive Screws to simplify adjustments on site

    2) Wiring Diagram within the cover

    3) Integrated Seal ➔ Protection Class IP 65

    4) Plastic brackets to keep the cover in position

    5) Integrated terminal strip

    1

    2 3

    4

    5

  • SWITCH BOX MSK/NSK (SIZE II)

    4.3 Accessories

    Pneumatic Quarter Turn Actuator (spring returned) with Switchbox MSK (Size II). Integrated mechanical limit switches. Support acc. to VDI/VDE 3845. Pilot solenoid valve for single acting pneumatic actuators.

    Pneumatic quarter turn actuator (double acting) with switch box NSK (Size II). Integrated proximity switches. Support acc. to VDI/VDE 3845. Compound coil pilot solenoid valve.

  • FOR AS-INTERFACE INSTALLATIONS

    www.ebro-armaturen.com post@ebro-armaturen.com

    03.2002 PDF

    Pneumtic quarter turn actuator (double acting) with directly mounted proximity switches. Covering cap acc. to UVV (German Accident Preven- tion Rules). Support acc. to VDI/VDE 3845.

    The pneumatic actuator shown here is ready for AS-Interface applications:

    1) Target Puck for position indication 3) Adaption for AS-Interface wiring 5) Pilot solenoid valve (24V) 2) T5 box: Indicates the position to the 4) Connection Cable to control the pilot 6) Speed control block for the adjustment of the

    control center. solenoid valve speed rate for opening and closing

    1 2

    3

    4

    5

    6

    FOR DIRECT MOUNTING

    http://www.ebro-armaturen.com