amprentare in doi timpi - gama panasil - kettenbach

22

Precision impressionPrecision impression

Panasil® initial contact.Not just, but also for extreme situations.

22

23

Precision impression

Product properties:

✓ A-silicone with maximum elastic recovery

✓ Latest setting characteristics

✓ High viscosity materials with optimum dynamic pressure

✓ Low viscosity materials with pronounced flowability and optimum hydrophilicity

✓ Manual kneading is no longer required

✓ Thixotropic, elastomeric materials that are stable when stored

The Panasil® range encompasses low viscosity, medium

viscosity, high viscosity and kneadable precision

impression materials on an A-silicone base for all

impression techniques and requirements. Enduring

success with over 30 years of product experience due to

continuous further development and adaptation to current

market conditions, while at the same time highly modern

and innovative. Simply intelligent.

Panasil®:Over 30 years of

innovation, quality and experience.

User benefi ts:

✓ Standardized dispensing, reduced material consumption (clean, reliable and quick)

✓ Crisply detailed preliminary impression, highly precise wash phase

✓ Maximum reliability for the precision impression

24


Areas of application

Areabi

netic

s Pu

tty

Fast

bine

tics

Putt

y

Soft

Putt

y

Putt

y Fa

st

Putt

y So

ft

tray

Fas

t H

eavy

tray

Sof

t H

eavy

initi

al c

onta

ct

X-Li

ght

initi

al c

onta

ct

Ligh

t

initi

al c

onta

ct

Reg

ular

cont

act

plus

X-Li

ght

two

in o

ne L

ight

One-step impression n n n n n nFixation impression

Foil impression n n n n n n nFunctional marginal contouring n n nFunctional impression nTwo-step impression n n n n n n n n n nMonophase impression

One-step putty-wash impression n n n n n nPick-up impression

Reline impression n n n n n

n highly recommended n recommended

Technical data

Product name Mixing

ratio

Working

time at

23°C/74 °F

≤

Working time at

35 °C/95 °F

≤

Intraoral

setting time at

35°C/95 °F ≤

Total setting

time* ≥

Hardness

(approx.)

Shore

Linear

dimensional

change

(maximum)

%

Elastic

Recovery test

(approx.) %

Strain in

compression

(approx.) %

Panasil® binetics Putty Fast 5:1 1 minute 30 seconds

Not applicable 2 minutes30 seconds

4 minutes A 63 - 0.20 99.5 2.5

Panasil® binetics Putty Soft 5:1 2 minutes Not applicable 3 minutes 5 minutes A 56 - 0.20 99.5 3.5

Panasil® Putty 1:1 2 minutes Not applicable 2 minutes 4 minutes A 66 - 0.20 99.0 2.7

Panasil® Putty Fast 1:1 1 minute 30 seconds

Not applicable 2 minutes 3 minutes30 seconds

A 66 - 0.20 99.0 2.7

Panasil® Putty Soft 1:1 2 minutes Not applicable 2 minutes 4 minutes A 60 - 0.20 99.0 2.7

Panasil® tray Fast Heavy 5:1 1 minute 20 seconds

Not applicable 2 minutes 3 minutes20 seconds

A 62 - 0.20 99.7 2.5

Panasil® tray Fast Heavy 1:1 1 minute Not applicable 2 minutes 3 minutes A 62 - 0.20 99.5 3.0

Panasil® tray Soft Heavy 5:1 2 minutes Not applicable 2 minutes 4 minutes A 55 - 0.20 99.7 3.0

Panasil® tray Soft Heavy 1:1 2 minutes Not applicable 2 minutes 4 minutes A 55 - 0.20 99.5 3.0

Panasil® tray Soft Heavy Fast 1:1 1 minute Not applicable 2 minutes 3 minutes A 55 - 0.20 99.5 3.0

Panasil® initial contact Regular 1:1 1 minute 30 seconds

1 minute 2 minutes30 seconds

4 minutes A 46 - 0.20 99.7 3.0

Panasil® initial contact Regular Fast

1:1 1 minute 30 seconds 2 minutes 3 minutes A 46 - 0.20 99.7 3.0

Panasil® contact two in one Light 1:1 2 minutes 1 minute 2 minutes 4 minutes A 46 - 0.20 99.7 3.5

Panasil® initial contact Light 1:1 1 minute 30 seconds


4 minutes A 46 - 0.20 99.3 3.5

Panasil® initial contact Light Fast


Panasil® initial contact X-Light 1:1 1 minute 30 seconds


4 minutes A 46 - 0.20 99.3 3.5

Panasil® initial contact X-Light Fast


Panasil® contact plus X-Light 1:1 2 minutes 1 minute 2 minutes 4 minutes A 46 - 0.20 99.7 5.0

*) Total setting time (removal from the mouth) from the start of mixing.

Panasil®

25


Panasil® binetics Putty is the fi rst genuine putty in the

5:1 system: pure convenience in a new unique form –

a kneadable, elastomer, addition-curing precision

impression material on a vinyl polysiloxane base for taking

impressions with different degrees of fi nal hardness and

setting characteristics. Available as Putty Fast for the two-

step impression technique and Putty Soft for the one-step

putty-wash technique.

Advantages

✓ Best elastomer properties ensure dimensionally accurate elastic recovery and easy, reliable removal from the mouth

✓ Easy, hygienic mixing at the press of a button in the practical 380 ml jumbo cartridge from Kettenbach

✓ Fast set: short intraoral setting time (2:30 minutes) with a total working time tailored to the needs of the practice (1:30 minutes)

✓ Soft: reduced final hardness for even easier removal from the mouth

First genuine

putty in the

5:1 system!

Intro pack Soft 5:1

380 ml cartridge, 10 dynamic mixers

380 ml REF 14702

Refi ll pack Fast set 5:1

2 x 380 ml cartridge

760 ml REF 14701

Intro pack Fast set 5:1


380 ml REF 14700

Refi ll pack Soft 5:1


760 ml REF 14703

Panasil® binetics Putty Soft and Fast

Link to:Application video

26


Panasil® tray is a high viscosity, addition-curing, elastomer

precision impression material on a vinyl polysiloxane

base with different degrees of fi nal hardness and setting

characteristics: The higher fi nal hardness of the quick-

setting tray Fast allows it to be used for the two-stage

impression technique, as it can be easily trimmed; tray

Soft is ideal for the two-step technique due to its lower

fi nal hardness.

Advantages


✓ Easy, hygienic mixing at the press of a button in the practical 380 ml jumbo cartridge from Kettenbach or in the conventional 50 ml cartridge

✓ Fast set: short intraoral setting time (2 minutes) with a total working time tailored to the needs of the practice (1:20 minutes)


Positionally stable

without ifs

and buts

Panasil® tray Soft Heavy and Fast Heavy


2011

Top Impression

Material

www.dentaladvisor.com

Editors’ Choice

+ + + + +

Dental Advisor, Vol. 27,

No. 05, June 2010

Normal pack Soft Fast 1:1

2 x 50 ml cartridge, 6 mixing tips

100 ml REF 13561

Normal pack Soft 1:1


100 ml Soft REF 13541

Intro pack 5:1


380 ml Soft REF 14706380 ml Fast set REF 14704

Refi ll pack 5:1


760 ml Soft REF 14707760 ml Fast set REF 14705

27


Panasil® Putty is a kneadable, elastomer, addition-curing

precision preliminary impression material on a vinyl poly-

siloxane base for taking preliminary impressions with

different degrees of fi nal hardness and setting charac-

teristics. Available as Putty and Putty Fast for the two-

step impression technique and Putty Soft for the one-step

putty-wash technique.

Advantages


✓ Good pressure build-up in combination with Panasil® Light bodies ensure highly precise results

✓ Best price/performance ratio, highly economical use

✓ Fast set: short intraoral setting time (2 minutes) with a total working time tailored to the needs of the practice (1:30 minutes)


The modern

classic with

over 30 years’

experience!

Normal pack Fast set 1:11 x 450 ml catalyst,1 x 450 ml base, 2 dispensing scoops

900 ml REF 11141

Normal pack Putty 1:11 x 450 ml catalyst,1 x 450 ml base, 2 dispensing scoops

900 ml REF 11101

Normal pack Soft 1:11 x 450 ml catalyst,1 x 450 ml base, 2 dispensing scoops

900 ml REF 11121

Economy pack Fast set 1:14 x 450 ml catalyst,4 x 450 ml base, 2 dispensing scoops

3600 ml REF 11143

Economy pack Putty 1:14 x 450 ml catalyst,4 x 450 ml base, 2 dispensing scoops

3600 ml REF 11103

Economy pack Soft 1:14 x 450 ml catalyst,4 x 450 ml base, 2 dispensing scoops

3600 ml REF 11123

Panasil® Putty, Putty Soft and Putty Fast

28

Precision impressionPrecision impression

Universal

use!

Panasil® monophase Medium is a medium viscosity,

elastomer, syringeable monophase impression material

on an A-silicone base. The high final hardness of

Panasil® monophase Medium makes it ideal for pick-up

impressions with fi xed/removable prosthetic restorations

and in implantology. It is also indicated for taking

impressions for fabricating crowns/bridges, inlays/onlays

and veneers due to its pronounced initial hydrophilicity.

Advantages

✓ Optimum flow behavior in a moist environment (lowest achievable contact angle of below 10° after 1 second) as basis for precise results

✓ Short intraoral setting time (2 minutes) with a total working time tailored to the needs of the practice (2 minutes)

✓ High final hardness (Shore-A-60) for precise transfer of the three-dimensional relationship in the pick-up impression


✓ Universal use for monophase and one-step impressions increases its cost-effectiveness in the practice

✓ Available in the practical 380 ml jumbo cartridge from Kettenbach and in the familiar 50 ml cartridge

Intro pack Regular set 5:1


380 ml REF 14708

Normal pack Regular set 1:1


100 ml REF 13501

Refi ll pack Regular set 5:1


760 ml REF 14709

Panasil® monophase Medium


29

Panasil® initial contact is an addition-curing, elastomer,

precision impression material on a vinyl polysiloxane base

with a very high initial hydrophilicity. Available as very low

viscosity X-Light, low viscosity Light and medium viscos-

ity Regular, each as normal and quick setting (Fast set).

Ideal in combination with Panasil® tray materials for the

two-step, one-step putty-wash and one-step techniques.

Advantages

✓ Exceptional initial hydrophilicity from the first second onwards as a basis for precise results

✓ Pronounced flowability, highly thixotropic and positionally stable


✓ The correct light body for any combination and impression technique: medium viscosity, low viscosity or very low viscosity, normal or quick setting

✓ Optimum results in combination with Panasil® tray materials

Panasil® initial contact X-Light, Light

and Regular


2011

Top Impression

Material

www.dentaladvisor.com

Editors’ Choice

+ + + + +

Dental Advisor, Vol. 27,

No. 05, June 2010

Hydrophilicdrop age 3 s

Contact angle <10°

Best hydrophilicity:

contact angle < 10°!

Normal pack Regular 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13431

Normal pack Light 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13411

Normal pack X-Light 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13401

Normal pack Regular Fast set 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13481

Normal pack Light Fast set 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13471

Normal pack X-Light Fast set 1:1 2 x 50 ml cartridge, 12 mixing tips

100 ml REF 13461

Bonus pack Light 1:1 10 x 50 ml cartridge, 50 mixing tips

500 ml REF 28310

Bonus pack X-Light 1:1 10 x 50 ml cartridge, 50 mixing tips

500 ml REF 28300


30

Panasil® contact is an addition-curing, elastomer preci-

sion impression material on a vinyl polysiloxane base with

a very short intraoral setting time. Available as very low

viscosity contact plus X-Light or low viscosity contact two

in one Light. Ideal in combination with Panasil® tray mate-

rials for the two-step, one-step putty-wash and one-step

techniques.

Advantages

✓ First light body material with flexible setting characteristics: total working time 30 seconds – 2 minutes

✓ Consistent short intraoral setting time of only 2 minutes

✓ Hydrophilic properties as the basis for precise results

✓ Pronounced flowability, highly thixotropic and positionally stable

✓ Optimum results in combination with Panasil® tray materials

Impression taking

without time limit!

Normal pack contact plus X-Light 1:1


100 ml REF 11892

Normal pack contact two in one Light 1:1


100 ml REF 11781

Panasil® contact plus X-Light and

two in one Light

0 80 160 240 320 400

140000000,0

100000000,0

60000000,0

20000000,0

0Time after start of mixing (sec.)

Viscosity (mpas)

amprentare in doi timpi - gama panasil - kettenbach

Documents