woodstain oil finishes patines waxes varnish lime … · oiled wood. it’s recommended for use on...
Post on 28-Jul-2020
1 Views
Preview:
TRANSCRIPT
High quality Dutch paint solutions
WOODSTAIN OIL FINISHES PATINES WAXES VARNISH LIME PAINTS CHALK PAINTS
whoKat & Co is a modern family business with atradition in manufacturing high quality furniturefinishing products for manufactures in TheNetherlands an abroad. The company wasfounded by Gerrit Kat in 1870. When manycustomers decided to relocate their productionto Eastern-Europe and Asia, this increasedthe export of products. Poland, Romania, ThePhilippines, Indonesia and China became thenew main export countries; each with its owncultural and technical challenges
our processKat & Co manufactures custom made furniturecoloring systems. Creativity, personal attention,guidance and service guarantee a product that,qualitatively and design wise, belong to the topof the furniture market and meets all modernrequirements. Kat & Co replies adequately andfast on new requests. Moreover, the researchand development department and the technicalstaff are available for assistance. All water basedproducts are composed according to the latestEuropean guidelines and legislation
whatKat & Co has been exporting to China since the1990s. in January 2015, a partnership agreementwas signed with Mr. Jeff Lee from Ningbo UnitedFortune Co. Ltd. This was the beginning ofexclusive representation of Kat & Co on theChinese market. this partnership agreement isan important step towards the future, a strongsupport for existing customers in china and anexpansion of the activities to China
our clientsKat & Co supplies furniture factories in WesternEurope, Eastern Europe and Asia. Moreover, thecompany supplies furniture importers and semimanufactures that outsource their productionto other countries, but want to give theirproducts a consistent and an appearance of thehighest quality. Kat & Co is proud to say thatmany customers have been loyal for decades
descriptionThe “KATCO” Oil finish is a blend of Pu basedoil, natural waxes and oil of natural sources. Itsdeveloped as an easy to go system for coloringand protection of your furniture or floor in onestep. “KATCO” Oil finish gives a natural lookwith an excellent resistance against water and allkinds of dirt contamination and is available in 12popular colors
oil-finishes
coverage: 25-30m2/liter
density: 0.825-1.000kg/dm3
(depending on the color)
solid content: 35%
coats: 1 coat is sufficient,
further coats will deepen the color
thinner: white spirit
packing: 5 Liter
available: 12 beautiful colors/shades
in storage: 12 months, in tightly sealed packing
general: after use plunge the towels into water,
because of self-ignition
properties
Usage drying times“KATCO” Oil finish can be used on bare or pre-
oiled wood. It’s recommended for use on furniture,
cabinets, doors, floors etc. For indoor use only
Available in matt and semi-gloss composition
touch dry in 2-4 hrs. (20°C)
full dry with best resistance: 7 days
unfinished wood Pre-oiled wood
Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Apply the Oil finish by brush and let it dry forabout 1 minute and then wipe it of with a towel.Always work in the direction of the grain
To deepen the color, apply an extra coat like step 2
Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust
Apply the Oil finish by brush and let it dry forabout 1 minute and then wipe it of with a towel.Always work in the direction of the grain
To deepen the color, apply an extra coat like step 2
2
1
2
1
Clear
Light Weathered
Light Grey
Smoked
½ White
Middle Weathered
Middle Grey
Dark Antique
White
Dark Weathered
Dark Grey
Charcoal
PU-lacquer
descriptionThe “KATCO” PU Lacquer is a high quality, onecomponent, water based PU lacquer with a highbuild and excellent properties against water, allkinds of dirt contamination and scratches.developed for the transparent finishing ofwooden furniture, floors, doors etc. Available inseveral gloss levels, from extra mat - gloss
Brush application Pre-oiled wood
thinner: water
packing: 5, 10 and 30 liter cans
available: extra mat, mat, semi gloss and gloss
in storage: 12 months, in tightly sealed packing -
keep away from freezing
properties
1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Apply the lacquer by brush. always work in thedirection of the grain
Let it dry for about 1-2 hours
Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust
Apply a coat of the “KATCO” PU Lacquer by spraygun (nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).
Usage drying times“KATCO” PU Lacquer is suitable for all kinds
of woods, indoor use only. Its easy to use and
can be applied by brush, or pneumatic spay
equipment
Let it dry for about 1-2 hours
By a room condition of 20°C, humidity Ca 65%:
1-2 hours
3
4
3
4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
base: PU (poly urethane)
coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter
density: 1.000-1.045kg/dm3
solid content: 34%
viscosity: 30-35” DIN4 at 20°C
coats: for the best properties, always apply 2 coats
22
The “KATCO” Specialwax is produced to an oldDutch recipe, with a perfect blend of Naturalwaxes and turpentine. Its developed for therestoration of antique furniture but also oftenused for all kinds of (new made) woodenfurniture, floors etc. “KATCO” Specialwax naturallyenhances the beauty and patina of your wood.
specialwax
unfinished wood finished wood
coverage: 15-20m2/liter
density: 0.800-0.900kg/dm3
(depending on the color)
coats: 1 coat is sufficient,
further coats will deepen the color
thinner: white spirit
packing: 375ml, 5 Liter
available: 6 beautiful colors/shades
in storage: 12 months, in tightly sealed packing
properties
1 1 Prepare the surface by sanding (grain 180) andremove the dust. Please be sure that the surface isclean.
Apply the wax by brush or towel If necessary wipeoff the excess of wax by a clean towel.
Let it dry for about 15-30 minutes.
Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust
Apply the wax by brush or towel If necessary wipeoff the excess of wax by a clean towel.
Let it dry for about 15-30 minutes.
Usage drying times“KATCO” Specialwax can be used on bare or sealed
wood. It’s recommended for use on Arts and Crafts
furniture, cabinets, doors, floors etc. For a beautiful
sheen, you have to polish the wax. For an unfinished
look, apply the wax without polishing.
15-30 minutes (20°C)
For a beautiful sheen, you have to polish the wax.For an unfinished look you have to apply the waxwithout polishing.
You can apply 1 coat, further coats will deepen thecolor and enhance the sheen levelAlways work in the direction of the grain.
3 3
For a beautiful sheen, you have to polish the wax.For an unfinished look you have to apply the waxwithout polishing.
You can apply 1 coat, further coats will deepen thecolor and enhance the sheen levelAlways work in the direction of the grain.
22
description
Clear
Jacobean
Forest
Lime
Stripped
Grey
descriptionThe “KATCO” WB sanding sealer is a speciallydeveloped, high quality, one component,universal sanding sealer with an excellentbuild- and sanding properties.
WB-sanding sealer
Brush application Pneumatic spray application
thinner: water
packing: 5, 10 and 30 liter cans
in storage: 12 months, in tightly sealed packing -
keep away from freezing
properties
1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Apply the WB sanding sealer by brush. alwayswork in the direction of the grain
Let it dry for about 2-3 hours
Apply a coat of the WB sanding sealer by spraygun (nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).
Usage drying timesThe “KATCO” WB sanding sealer is suitable for all
kinds of woods, indoor use only. Its easy to use and
can be applied by brush or pneumatic spray
equipment. The WB sanding sealer has tot be finished
with the (water based) PU or Acrylic Lacquer.
By a room condition of 20°C, humidity ca 65%:
2-3 hours
Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Let it dry for about 2-3 hours
22
3
4
3
4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
base: acrylic
coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter
density: 1.000-1.045kg/dm3
solid content: 29%
viscosity: 30-35” DIN4 at 20°C
Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
descriptionThe “KATCO” water based Lacquer is a goodquality, one component, acrylic based lacquerwith a good build and smooth touch. Withgood resistance against water, all kinds of dirtcontamination and scratches. Developed for thetransparent finishing of wooden furniture, doorsetc. Available in several gloss levers, from mat - gloss.
WB-lacquer
Brush application Pneumatic spray application
1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Apply the lacquer by brush. always workin the direction of the grain
Let it dry for about 1-2 hours
Apply a coat of the Lacquer by spray gun(nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).
Usage drying timesThe “KATCO” water based Lacquer is suitable for all
kinds of woods, indoor use only. Its easy to use and
can be applied by brush or pneumatic spray
equipment.
By a room condition of 20°C, humidity ca 65%:
1-2 hours
Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Let it dry for about 1-2 hours
thinner: water
packing: 5, 10 and 30 liter cans
available: mat, semi gloss and gloss
in storage: 12 months, in tightly sealed packing -
keep away from freezing
propertiesbase: acrylic
coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter
density: 1.000-1.045kg/dm3
solid content: 34%
viscosity: 30-35” DIN4 at 20°C
coats: for the best properties, always apply 2 coats
22
3
4
3
4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)
WB-woodstain
descriptionThe “KATCO” water based Stain is a water basedrange of high quality stains, for indoor use only.Specially developed for transparent coloringof wooden furniture, floors etc. It will keep thenatural look of wood and is available in almostevery color.
Brush application Pneumatic spray application
1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Apply the stain by brush. always workin the direction of the grain
Let it dry for about 1-2 hours
Apply a coat of the stain by spray gun.After ca 1 minute, equalize with a brush. alwayswork in the direction of the grain. (nozzle size: 1.0 -1.3 mm) (working pressure: 1.5 - 2.0 bar).
Usage drying timesThe “KATCO” water based Stain is suitable for all kinds
of woods. For resistance against water and dirt
contamination, it has to be finished with Oil,
Lacquer (water based, Nitro, 2-K) or Wax
By a room condition of 20°C, humidity ca 65%:
1-2 hours
Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean
Let it dry for about 1-2 hours
thinner: water
packing: 5, 10 and 30 liter cans
available: almost every color
in storage: 12 months, in tightly sealed packing -
keep away from freezing
properties
Choose your finishing (water based lacquer,Nitro, 2-K) and apply
2
3
4
3
4Choose your finishing (water based lacquer,Nitro, 2-K) and apply
2
base: acrylic
coverage: brush: 10-15 m2/liter, spray gun: 8-10 m2/liter
density: 1.000-1.150 kg/dm3 (depending on the color)
solid content: 2-14%
coats: 1 coat is sufficient, further coats will deepen
the color
WB-patina
descriptionThe “KATCO” WB Patina is a water based rangeof high quality patina´s, for indoor use only.Specially developed to create an old/used/rusticlook of wooden (distressed) furniture, floors etc.It will keep the natural look of wood and isavailable in almost every color
Brush application Pneumatic spray application
1 1 Please be sure that the surface is clean
Apply the patina by brush
Let it dry for about 1-2 hours
Apply a coat of the patina by spray gun.(nozzle size: 1.0 - 1.3 mm) (working pressure:2.5 - 3.0 bar).
Usage drying timesThe “KATCO” WB Patina is suitable for all kinds of woods.
for the resistance against water and dirt contamination,
it has to be finished with Oil, Lacquer (water based,
Nitro, 2-K) or Wax
By a room condition of 20°C, humidity ca 65%:
1-2 hours
Please be sure that the surface is clean
Let it dry for about 1-2 hours.Create the effect with scotch-brite, steel wool orsanding paper
thinner: water
packing: 5, 10 and 30 liter cans
available: almost every color
in storage: 12 months, in tightly sealed packing -
keep away from freezing
properties
Choose your finishing (water based lacquer,Nitro, 2-K) and apply
base: acrylic
coverage: brush: 12-15 m2/liter, spray gun: 10-12 m2/liter
density: 1.100-1.450 kg/dm3 (depending on the color)
solid content: 10-35% (depending on the color)
coats: 1 coat is sufficient
2
3
4
3
4Choose your finishing (water based lacquer,Nitro, 2-K) and apply
2
Outdoor paint
descriptionThe “KATCO” Outdoor paint is an easy to apply,
outdoor durable protection.
Available in various colors, ranging from
ancient tones to bright beach house colors
Brush application
1 Prepare the surface by sanding (grain 150-180) andremove the dust. Please be sure that the surface isclean
Apply the paint by brush. Always work in thedirection of the grain
Let it dry for about 2-4 hours
Usage drying timesThe “KATCO” Outdoor paint is suitable for all kinds
of woods.
By a room condition of 20°C, humidity ca 65%:
2-4 hours
thinner: water
packing: 5, 10 and 30 liter cans
available: almost every color
in storage: 12 months, in tightly sealed packing -
keep away from freezing
propertiesbase: acrylic
coverage: brush: 8-10 m2/liter
density: 1.000-1.045 kg/dm3 (depending on the color)
solid content: 40-45%
viscosity: 30-35” DIN4 at 20°C
coats: For new first time painting, we recommend to
apply minimal 2 coats. For repainting, 1 coat is sufficient
3
4Sand it very carefully, sanding paper grain 360.Apply a second layer (like step 2)
2
G. Kat & Co B.V.Havenweg 308243 PL LelystadTel: (+31) 0320 261882Fax: (+31) 0320 260168Email: info@katenco.nlwww.katenco.nl
All furniture coloring products are
developed by using as many natural,
renewable and non-harmful ingredients
as possible. if possible, the products are
water based and the used solvents are
the least harmful available. Obviously,
high quality and perfection remain the
most important ingredients. This way,
Kat & Co offers the best product, with
attention for the environment and custom
made for you
top related