wire rope slings - delta rigging
Post on 03-Feb-2022
22 Views
Preview:
TRANSCRIPT
30
WIR
E RO
PE S
LIN
GSWire Rope Sl ings
SLING LEG OPTIONSStandard End Fitting CombinationsTo order sling legs, choose the correct size from the tables on the following pages. Determine the length needed andspecify the end fittings required from the list of combinations shown below. Two, three, and four leg spreaders will befabricated with oblong Master links, unless otherwise specified.
STANDARD EYE & STANDARD EYE STANDARD EYE & THIMBLE
with Shackle Sealed in Thimble
STANDARD EYE & THIMBLE
STANDARD EYE & HOOK
CRESCENT THIMBLE & STANDARD EYE
SLIP-THRU THIMBLE & STANDARD EYE
THIMBLE & THIMBLE
THIMBLE & HOOK
THIMBLE & SLIP-THRU THIMBLE
STANDARD EYE & OPEN SWAGESOCKET
STANDARD EYE & CLOSEDSWAGE SOCKET
SLIP-THRU THIMBLE & HOOK
SLIP-THRU THIMBLE & SLIP-THRU THIMBLE
EYE & THIMBLE
with Sliding Choker HookEYE & EYE
with Sliding Choker Hook
31
WIRE RO
PE SLINGS
Wire Rope Sl ings
1-PART SLINGS/MECHANICAL SPLICE (CHOKER)SINGLE LEG SLINGS
Extra improved plow steel IWRCRated capacity in tons(EIPS)
ROPEDIAMETER(INCHES) VERTICAL CHOKER
VERTICALBASKET
60DEGREE
45DEGREE
30DEGREE
1/4 .65 .48 1.3 1.1 .91 .65
5/16 1 .74 2 1.7 1.4 1
3/8 1.4 1.1 2.9 2.5 2.0 1.4
7/16 1.9 1.4 3.9 3.4 2.7 1.9
1/2 2.5 1.9 5.1 4.4 3.6 2.5
9/16 3.2 2.4 6.4 5.5 4.5 3.2
5/8 3.9 2.9 7.8 6.8 5.5 3.9
3/4 5.6 4.1 11 9.7 7.9 5.6
7/8 7.6 5.6 15 13 11 7.6
1 9.8 7.2 20 17 14 9.8
1-1/8 12 9.1 24 21 17 12
1-1/4 15 11 30 26 21 15
1-3/8 18 13 36 31 25 18
1-1/2 21 16 42 37 30 21
1-5/8 24 18 49 42 35 24
1-3/4 28 21 57 49 40 28
1-7/8 32 24 64 56 46 32
2 37 28 73 63 52 37
2-1/8 40 31 80 69 56 40
2-1/4 44 35 89 77 63 44
2-3/8 49 38 99 85 70 49
2-1/2 54 42 109 94 77 54
2-5/8 60 46 119 103 84 60
2-3/4 65 51 130 113 92 65
2-7/8 71 55 141 122 100 71
3 77 60 153 132 108 77
3-1/8 82 64 165 143 117 82
3-1/4 89 69 177 153 125 89
3-3/8 95 74 190 165 135 95
3-1/2 102 79 203 102 144 176
BASKET AT DEGREES
Rated Capacities Basket Hitch based on D/d ratio of 25.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.Rated Capacities shown apply only to 6x19 and 6x37 classification wire rope.
32
WIR
E RO
PE S
LIN
GSWire Rope Sl ings
1-PART SLINGS/MECHANICAL SPLICE2-LEG SPREADERS
Extra improved plow steel IWRCRated capacity in tons(EIPS)
ROPEDIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.1 .91 .65
5/16 1.7 1.4 1
3/8 2.5 2 1.4
7/16 3.4 2.7 1.9
1/2 4.4 3.6 2.5
9/16 5.5 4.5 3.2
5/8 6.8 5.5 3.9
3/4 9.7 7.9 5.6
7/8 13 11 7.6
1 17 14 9.8
1-1/8 21 17 12
1-1/4 26 21 15
1-3/8 31 25 18
1-1/2 37 30 21
1-5/8 42 35 24
1-3/4 49 40 28
1-7/8 56 46 32
2 63 52 37
2-1/8 69 56 40
2-1/4 77 63 44
2-3/8 85 70 49
2-1/2 94 77 54
2-5/8 103 84 60
2-3/4 113 92 65
2-7/8 122 100 71
3 133 108 77
3-1/8 143 117 82
3-1/4 153 125 89
3-3/8 165 135 95
3-1/2 176 144 102
2-LEG SPREADERS
LENGTH
Rated Capacities Basket Hitch based on D/d ratio of 25.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.Rated Capacities shown apply only to 6x19 and 6x37 classification wire rope.
33
WIRE RO
PE SLINGS
Wire Rope Sl ings
1-PART SLINGS/MECHANICAL SPLICE3-LEG SPREADERS
Extra improved plow steel IWRCRated capacity in tons(EIPS)
ROPEDIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.7 1.4 .97
5/16 2.6 2.1 1.5
3/8 3.7 3.0 2.2
7/16 5.0 4.1 2.9
1/2 6.6 5.4 3.8
9/16 8.3 6.8 4.8
5/8 10 8.3 5.9
3/4 15 12 8.4
7/8 20 16 11
1 26 21 15
1-1/8 31 26 18
1-1/4 38 31 22
1-3/8 46 38 27
1-1/2 55 45 32
1-5/8 63 52 37
1-3/4 74 60 42
1-7/8 84 68 48
2 95 78 55
2-1/8 103 84 60
2-1/4 116 94 67
2-3/8 128 105 74
2-1/2 141 115 82
2-5/8 155 126 89
2-3/4 169 138 97
2-7/8 183 150 106
3 199 162 15
3-1/8 214 175 124
3-1/4 230 188 133
3-3/8 247 202 143
3-1/2 264 215 152
3-LEG SPREADERS
LENGTH
Rated Capacities Basket Hitch based on D/d ratio of 25.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.Rated Capacities shown apply only to 6x19 and 6x37 classification wire rope.
34
WIR
E RO
PE S
LIN
GSWire Rope Sl ings
ROPEDIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 2.2 1.8 1.3
5/16 3.5 2.8 2.0
3/8 5.0 4.1 2.9
7/16 6.7 5.5 3.9
1/2 8.8 7.1 5.1
9/16 11 9.0 6.4
5/8 14 11 7.8
3/4 19 16 11
7/8 26 21 15
1 34 28 20
1-1/8 42 34 24
1-1/4 51 42 30
1-3/8 62 50 36
1-1/2 73 60 42
1-5/8 85 69 49
1-3/4 98 80 57
1-7/8 112 91 64
2 127 104 73
2-1/8 138 113 80
2-1/4 154 126 89
2-3/8 171 139 99
2-1/2 188 154 109
1-PART SLINGS/MECHANICAL SPLICE4-LEG SPREADERS
Extra improved plow steel IWRCRated capacity in tons(EIPS)
4-LEG SPREADERS
LENGTH
Rated Capacities Basket Hitch based on D/d ratio of 25.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.Rated Capacities shown apply only to 6x19 and 6x37 classification wire rope.
35
WIRE RO
PE SLINGS
Wire Rope Sl ings
ROPE DIAMETER(INCHES) VERTICAL CHOKER VERTICAL BASKET
1/4 .61 .45 1.2
5/16 .86 .63 1.7
3/8 1.1 .84 2.3
7/16 1.5 1.1 3.1
1/2 2.2 1.6 4.3
9/16 2.7 2.0 5.4
5/8 3.3 2.5 6.7
3/4 4.7 3.5 9.4
7/8 6.3 4.7 13
1 8.1 6.0 16
1-1/8 10 7.4 20
1-1/4 12 9.1 25
1-3/8 14 11 29
1-1/2 17 13 34
1-5/8 20 15 40
1-3/4 22 17 45
1-7/8 25 19 51
2 28 21 57
2-1/8 32 23 63
2-1/4 35 25 69
STAINLESS STEEL/MECHANICAL SPLICESINGLE LEG SLINGS
Stainless steel Type 302 or 304 IWRCRated capacity in tons
Rated Capacities Basket Hitch based on D/d ratio of 25 Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.Rated Capacities shown apply only to 6x19 and 6x37 classification wire rope.
36
WIR
E RO
PE S
LIN
GSWire Rope Sl ings
ROPE DIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.1 0.86 0.61
5/16 1.5 1.2 0.86
3/8 2.0 1.6 1.1
7/16 2.7 2.2 1.5
1/2 3.8 3.1 2.2
9/16 4.7 3.8 2.7
5/8 5.8 4.7 3.3
3/4 8.2 6.7 4.7
7/8 11 8.9 6.3
1 14 11 8
1-1/8 17 14 10
1-1/4 21 17 12
1-3/8 24 20 14
1-1/2 29 24 17
1-5/8 33 27 19
1-3/4 38 31 22
1-7/8 43 35 25
2 48 39 28
2-1/8 52 42 30
2-1/4 57 46 33
STAINLESS STEEL TYPE 302 AND 304/MECHANICAL SPLICE IWRCTWO-LEG BRIDLE
Rated capacity in tons of 2,000 lbs.Rated capacities shown apply only to 6x19 and 6x36 classification wire rope.
Rated Capacities Basket Hitch based on D/d ratio of 25 Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.
37
WIRE RO
PE SLINGS
Wire Rope Sl ings
ROPE DIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.6 1.3 0.91
5/16 2.2 1.8 1.3
3/8 3.0 2.4 1.7
7/16 4.0 3.3 2.3
1/2 5.6 4.6 3.2
9/16 7.1 5.8 4.1
5/8 8.6 7.1 5.0
3/4 12 10 7.1
7/8 16 13 9.5
1 21 17 12
1-1/8 26 21 15
1-1/4 31 25 18
1-3/8 36 30 21
1-1/2 43 35 25
1-5/8 50 41 29
1-3/4 57 46 33
1-7/8 64 52 37
2 72 58 41
2-1/8 78 63 45
2-1/4 85 69 49
STAINLESS STEEL TYPE 302 AND 304/MECHANICAL SPLICE IWRCTHREE-LEG BRIDLE
Rated capacity in tons of 2,000 lbs.Rated capacities shown apply only to 6x19 and 6x36 classification wire rope.
Rated Capacities Basket Hitch based on D/d ratio of 25 Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.
38
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
ROPE DIAMETER(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 2.1 1.7 1.2
5/16 3.0 2.4 1.7
3/8 3.9 3.2 2.3
7/16 5.4 4.4 3.1
1/2 7.5 6.1 4.3
9/16 9.4 7.7 5.4
5/8 12 9.4 6.7
3/4 16 13 9.4
7/8 22 18 13
1 28 23 16
1-1/8 34 28 20
1-1/4 41 34 24
1-3/8 49 40 28
1-1/2 58 47 33
1-5/8 67 54 38
1-3/4 76 62 44
1-7/8 85 70 49
2 95 78 55
2-1/8 104 85 60
2-1/4 113 93 66
STAINLESS STEEL TYPE 302 AND 304/MECHANICAL SPLICE IWRC
FOUR-LEG BRIDLE
Rated capacity in tons of 2,000 lbs.Rated capacities shown apply only to 6x19 and 6x36 classification wire rope.
Rated Capacities Basket Hitch based on D/d ratio of 25 Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.
Wire Rope Sl ings
39
WIRE RO
PE SLINGS
CABLE LAID SLINGS/MECHANICAL SPLICE
MECHANICAL TYPE SPLICE RATED CAPACITIES IN TONS
ROPE DIAMETER(INCHES) VERTICAL CHOKER
VERTICALBASKET 60 DEGREE 45 DEGREE 30 DEGREE
7 x 7 x 7 CONSTRUCTION
1/4 .50 .34 1.0 0.87 0.71 0.50
3/8 1.1 .74 2.2 1.9 1.5 1.1
1/2 1.9 1.3 3.7 3.2 2.6 1.9
5/8 2.8 1.9 5.5 4.8 3.9 2.8
7 x 7 x 19 CONSTRUCTION
3/4 4.1 2.8 8.1 7.0 5.8 4.1
7/8 5.4 3.7 11 9.3 7.6 5.4
1 6.9 4.7 14 12 9.7 6.9
1-1/8 8.3 5.8 17 14 12 8.3
1-1/4 9.9 7.0 20 17 14 9.9
SINGLE PART SLING TWO LEG SPREAD OR BASKET
Rated Capacities Basket Hitch based on D/d ratio of 10 or greater.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominalsling diameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.
42
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
MULTI-PART WIRE ROPE SLINGSDelta Rigging and Tools Multi-Part slings are flexible, snug up tightly around the load in choker hitches, and quickly regainshape after a lift. They also offer outstanding handling characteristics, particularly in the larger rated capacities. Whenloaded, stress is equally distributed to all rope parts in the sling body due to the helical manner in which ropes are laidtogether.
Braided slings are formed by continuously plaiting, or braiding, several ropes together to form the sling body and both eyesin a single fabrication operation. Ends of individual ropes are usually hand-tucked or mechanically spliced into componentropes of the body. Eyes are wrapped and given a rubberized coating since eyes are not braided.
Braided slings are often selected where loads must be rolled or maneuvered, since the design creates friction to grip loadsand resist rotation.
MULTI-PART BODYBRAIDEDCONSTRUCTION
High flexibility is achieved bybraiding, or plaiting, one or morewire ropes to form a fabric for thesling body. Component ropes runcontinuously through body andeyes, ends are hand-tucked intosling body or secured with pressedsleeves. 6-part sling is flat, 8-partsling is round.
4, 5 and 7-part Multi-part slingswith either mechanical or hand eyesplices are available on special order.
HAND SPLICE
Each sling is hand fabricated bylaying together one or more ropesin a helical manner, so componentropes run continuously through theeyes and sling body. Ends aresecured into component rope byhand-tucked splices.
BRAIDEDMECHANICAL SPLICE
Three wire ropes are helically laidby hand to form a 3-part fabric,from which sling bodies of 3 or 9parts may be made by helicallylaying one or three parts of fabrictogether. Mechanical splices formthe eyes that provide centerline pullalong the sling body. Same numberof rope parts in the sling eyes as inthe body. Each sling is proof loadedbefore shipment.
ROPEDIAMETER(INCHES)
SLINGDIA. VERTICAL CHOKER** 90º 60º 45º 30º A B
SLIP THRUTHIMBLEST
HEAVYTHIMBLEHT
IPS IWRC #1/8 1/4 .42 .37 .84 .73 .59 .42 3 6 W-2 5/16
IPS IWRC 3/16 3/8 .70 .61 1.4 1.2 1.0 .70 3 6 W-2 7/16
IPS IWRC 1/4 1/2 1.2 1.1 2.5 2.1 1.7 1.2 4 8 W-3 9/16
IPS IWRC 5/16 5/8 1.9 1.7 3.8 3.3 2.7 1.9 4 8 W-4 3/4
IPS IWRC 3/8 3/4 2.8 2.4 5.5 4.8 3.9 2.8 5 10 W-4 7/8
IPS IWRC 7/16 7/8 3.7 3.3 7.5 6.5 5.3 3.7 6 12 W-5 7/8
IPS IWRC 1/2 1 4.8 4.2 9.7 8.4 6.8 4.8 6 12 W-5 1
IPS IWRC 9/16 1-1/8 6.1 5.3 12 11 8.6 6.1 7.5 15 W-6 1-1/8
IPS IWRC 5/8 1-1/4 7.5 6.6 15 13 11 7.5 9 18 W-6 1-1/4
IPS IWRC 3/4 1-1/2 11 9.4 22 19 15 11 10 20 W-7 1-3/8
IPS IWRC 7/8 1-3/4 15 13 29 25 21 15 12 24 W-9 1-7/8
IPS IWRC 1 2 19 17 38 33 27 19 15 30 W-9 2
Wire Rope Sl ings
43
WIRE RO
PE SLINGS
MULTI-PART BODY SINGLE LEG WIRE ROPE SLINGS3-PART
HAND SPLICE
3-PART
MECHANICAL SPLICE
RATED CAPACITY (TONS)*BASKET HITCH
EYEDIMENSIONS
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
3-PART SIMPLE LEG WIRE ROPE SLING
44
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
MULTI-PART WIRE ROPE BODY 2-LEG CHOKERS
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
ROPEDIAMETER(INCHES)
SLINGDIA.
SINGLE LEGCHOKER** 60º 45º 30º
CHOKERHOOKNUMBER D L W
IPS IWRC #1/8 1/4 0.5 .64 .52 .37 1/4–5/16 1/2 5 2-1/2
IPS IWRC 3/16 3/8 0.8 1.1 .87 .61 3/8 1/2 5 2-1/2
IPS IWRC 1/4 1/2 1.5 1.9 1.5 1.1 1/2 5/8 6 3
IPS IWRC 5/16 5/8 2.3 2.9 2.4 1.7 5/8 3/4 5-1/2 2-3/4
IPS IWRC 3/8 3/4 3.3 4.2 3.4 2.4 3/4 1 8 4
IPS IWRC 7/16 7/8 4.4 5.7 4.6 3.3 7/8–1 1 8 4
IPS IWRC 1/2 1 5.7 7.3 6.0 4.2 7/8–1 1 8 4
IPS IWRC 9/16 1-1/8 5.0 9.2 7.5 5.3 1-1/8–1-1/4 1 8 4
IPS IWRC 5/8 1-1/4 6.1 11 9.3 6.6 1-1/8–1-1/4 1 8 4
IPS IWRC 3/4 1-1/2 8.7 16 13 9.4 1-3/8–1-1/2 1-1/2 12 4
RATED CAPACITY (TONS)*
2-LEG CHOKER HITCH
3-PART TWO-LEG WIRE ROPE CHOKERS
SLIP THRUTHIMBLE
Wire Rope Sl ings
45
WIRE RO
PE SLINGS
MULTI-PART WIRE ROPE BODY 2-LEG SPREADERSHAND SPLICE MECHANICAL SPLICE
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.**WORKING LOAD LIMIT
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
LATCH KITS ARE AVAILABLE IF REQUIRED.
ROPEDIAMETER(INCHES)
SLINGDIA. 60º 45º 30º DIA. LENGTH WIDTH
WLL**TON E R
IPS IWRC #1/8 1/4 .73 .59 .42 1/2 5 2-1/2 3/4 15/16 3-7/32
IPS IWRC 3/16 3/8 1.2 1.0 .70 1/2 5 2-1/2 1 1-1/32 3-21/32
IPS IWRC 1/4 1/2 2.1 1.7 1.2 3/4 5-1/2 2-3/4 2 1-7/32 4-11/16
IPS IWRC 5/16 5/8 3.3 2.7 1.9 1.0 8 4 3 1-1/2 5-3/4
IPS IWRC 3/8 3/4 4.8 3.9 2.8 1.0 8 4 5 1-7/8 7-3/8
IPS IWRC 7/16 7/8 6.5 5.3 3.7 1.0 8 4 7-1/2 2-1/4 9-1/16
IPS IWRC 1/2 1 8.4 6.8 4.8 1-1/4 8-3/4 4-3/8 7-1/2 2-1/4 9-1/16
IPS IWRC 9/16 1-1/8 11 8.6 6.1 1 8 4 7-1/2 2-1/4 9-1/16
IPS IWRC 5/8 1-1/4 13 11 7.5 1-1/4 8-3/4 4-3/8 7-1/2 2-1/4 9-1/16
IPS IWRC 3/4 1-1/2 19 15 11 1-1/2 12 6 10 2-1/2 10-1/16
IPS IWRC 7/8 1-3/4 25 21 15 1-3/4 12 6 15 3-3/8 12-1/2
IPS IWRC 1 2 33 27 19 2 14 7 20 4 14-1/16
RATED CAPACITY (TONS)*ALLOY OBLONG LINK
3-PART TWO-LEG WIRE ROPE BRIDLES
HOOK
ROPEDIAMETER(INCHES)
WIDTHOFBODY
THICKNESSOFBODY VERTICAL
CHOKERHITCH** 60º 45º 30º A B
SLIP THRUTHIMBLEST
HEAVYTHIMBLEHT
# 3/32 7/16 1/4 0.42 0.37 0.84 0.73 0.59 0.42 2 4 W-2 1/4
# 1/8 9/16 3/8 0.84 0.74 1.7 1.5 1.2 0.84 3 6 W-2 5/16
# 3/16 13/16 1/2 1.4 1.2 2.8 2.4 2.0 1.4 4 8 W-3 1/2
# 1/4 1-1/8 11/16 2.5 2.2 4.9 4.3 3.5 2.5 5 10 W-4 5/8
# 5/16 1-3/8 7/8 3.8 3.4 7.7 6.7 5.4 3.8 6 12 W-4 3/4
# 3/8 1-11/16 1 5.5 4.8 11.0 9.5 7.8 5.5 7 14 W-5 7/8
7/16 2 1-3/16 7.5 6.5 15.0 13.0 11.0 7.5 8 16 W-5 1
1/2 2-1/4 1-5/16 9.7 8.5 19.0 17.0 14.0 9.7 9 18 W-6 1-1/8
9/16 2-1/2 1-1/2 12.0 11.0 24.0 21.0 17.0 12.0 10 20 W-6 1-3/8
5/8 2-13/16 1-11/16 15.0 13.0 30.0 26.0 21.0 15.0 11 22 W-7 1-1/2
3/4 3-3/8 2 22.0 19.0 43.0 37.0 30.0 22.0 12 24 W-8 1-5/8
7/8 4 2-5/16 29.0 25.0 58.0 50.0 41.0 29.0 14 28 W-9 2
1 4-1/2 2-11/16 38.0 33.0 75.0 65.0 53.0 38.0 16 32 W-10 –
46
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
BRAIDED WIRE ROPE BODY SINGLE LEG SLINGS
FLAT BRAID
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
ALL CAPACITIES IN TONS OF 2,000 LBS. ALL EYE AND FITTING DIMENSIONS IN INCHES.
6-PARTRATED CAPACITY (TONS)*
BASKET HITCHEYE
IPS
IWRC
ROPEDIAMETER(INCHES) 60º 45º 30º D L W
WWLTONS** E R
# 3/32 0.73 0.59 0.42 1/2 5 2-1/2 3/4 15/16 3-7/32
# 1/8 1.5 1.2 0.84 1/2 5 2-1/2 1 1-1/32 3-21/32
# 3/16 2.4 2.0 1.4 5/8 6 3 1-1/2 1-1/16 4-3/32
# 1/4 4.3 3.5 2.5 3/4 5-1/2 2-3/4 3 1-1/2 5-3/4
# 5/16 6.7 5.4 3.8 1 8 4 5 1-7/8 7-3/8
# 3/8 9.5 7.8 5.5 1 8 4 7-1/2 2-1/4 9-1/16
7/16 13.0 11.0 7.5 1-1/4 8-3/4 4-3/8 7-1/2 2-1/4 9-1/16
1/2 17.0 14.0 9.7 1-1/2 12 6 10 2-1/4 10-1/16
9/16 21.0 17.0 12.0 1-1/2 12 6 15 3-3/8 12-1/2
5/8 26.0 21.0 15.0 1-3/4 12 6 20 4 14-1/16
3/4 37.0 30.0 22.0 2 14 7 25 4-1/4 18-5/16
7/8 50.0 41.0 29.0 2-1/4 16 8 AH-37 4-1/4 18-3/16
ROPEDIAMETER(INCHES)
SINGLE LEGCHOKER** 60º 45º 30º D L W
HOOK NO.
# 3/32 0.37 0.64 0.52 0.37 1/2 5 2-1/2 0
# 1/8 0.74 1.3 1.04 0.74 1/2 5 2-1/2 1
# 3/16 1.2 2.1 1.7 1.2 1/2 5 2-1/2 2
# 1/4 2.2 3.7 3.1 2.2 3/4 5-1/2 2-3/4 4
# 5/16 3.4 5.8 4.8 3.4 1 8 4 5
# 3/8 4.8 8.4 6.8 4.8 1 8 4 6
7/16 6.5 11.0 9.2 6.5 1-1/4 8-3/4 4-3/8 7
1/2 8.5 15.0 12.0 8.5 1-1/4 8-3/4 4-3/8 8
9/16 11.0 18.0 15.0 11.0 1-1/2 12 6 8
Wire Rope Sl ings
47
WIRE RO
PE SLINGS
BRAIDED WIRE ROPE BODY 2 LEG CHOKERS
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the componentrope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or lessthan the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
ALLOY OBLONG LINK2 LEG CHOKER HITCHRATED CAPACITY (TONS)*
6-PART
BRAIDED WIRE ROPE BODY 2 LEG SPREADERS
6-PART
LATCH KITS ARE AVAILABLE IF REQUIRED.
ALLOY OBLONG LINK HOOKRATED CAPACITY (TONS)*
IPS
IWRC
IPS
IWRC
LENGTH
ROPEDIAMETER(INCHES)
SLINGDIAMETER(INCHES) VERTICAL
CHOKERHITCH** 60º 45º 30º A B
SLIP THRUTHIMBLEST
HEAVYTHIMBLEHT
# 3/32 7/16 .56 0.49 1.1 0.97 0.79 0.56 2 4 W-2 5/16
# 1/8 9/16 1.1 1.0 2.2 1.9 1.6 1.1 3 6 W-2 3/8
# 3/16 13/16 1.9 1.6 3.7 3.2 2.6 1.9 4 8 W-3 1/2
# 1/4 1-1/8 3.3 2.9 6.6 5.7 4.7 3.3 5 10 W-4 3/4
# 5/16 1-3/8 5.1 4.5 10.0 8.9 7.3 5.1 6 12 W-5 1
# 3/8 1-11/16 7.3 6.4 15.0 13.0 10.0 7.3 7 14 W-5 1-1/8
7/16 2 10.0 8.7 20.0 17.0 14.0 10.0 8 16 W-6 1-1/4
1/2 2-1/4 13.0 11.0 26.0 22.0 18.0 13.0 9 18 W-7 1-3/8
9/16 2-1/2 16.0 14.0 32.0 28.0 23.0 16.0 10 20 W-7 1-1/2
5/8 2-13/16 20.0 18.0 40.0 35.0 28.0 20.0 11 22 W-8 1-3/4
3/4 3-3/8 29.0 25.0 57.0 50.0 41.0 29.0 12 24 W-9 2
7/8 4 39.0 34.0 78.0 67.0 55.0 39.0 14 28 W-10 –
1 4-1/2 50.0 44.0 101.0 87.0 71.0 50.0 16 32 W-10 –
48
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
BRAIDED WIRE ROPE BODY SINGLE LEG SLINGS
ROUND BRAID
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
IPS
IWRC
8-PARTRATED CAPACITY (TONS)*
BASKET HITCHEYE
ROPEDIAMETER(INCHES)
SINGLELEGCHOKER** 60º 45º 30º D L W
HOOKNO.
# 3/32 0.49 0.85 0.69 0.49 1/2 5 2-1/2 0
# 1/8 0.98 1.7 1.4 0.98 1/2 5 2-1/2 1
# 3/16 1.6 2.8 2.3 1.6 3/4 6 3 2
# 1/4 2.9 5.0 4.1 2.9 1 8 4 4
# 5/16 4.5 7.8 6.3 4.5 1 8 4 5
# 3/8 6.4 11.0 9.1 6.4 1-1/4 8 4 6
7/16 8.7 15.0 12.0 8.7 1-1/2 12 6 7
1/2 11.0 20.0 16.0 11.0 1-1/2 12 6 8
Wire Rope Sl ings
49
WIRE RO
PE SLINGS
BRAIDED WIRE ROPE BODY 2 LEG CHOKERSDT-8P2
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
IPS
IWRC
8-PARTRATED CAPACITY (TONS)*
2 LEG CHOKER HITCHALLOY
OBLONG LINK
50
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
BRAIDED WIRE ROPE BODY 2-LEG SPREADERS
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the componentrope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or lessthan the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
IPS
IWRC
8-PART
ROPEDIAMETER(INCHES) 60º 45º 30º D L W
WWLTONS** E R
# 3/32 0.97 0.79 0.56 1/2 5 2-1/2 3/4 15/16 3-7/32
# 1/8 1.9 1.6 1.1 1/2 5 2-1/2 1-1/2 1-1/16 4-3/32
# 3/16 3.2 2.6 1.9 3/4 5-1/2 2-3/4 3 1-1/2 5-3/4
# 1/4 5.7 4.7 3.3 1 8 4 5 1-7/8 7-3/8
# 5/16 8.9 7.3 5.1 1 8 4 AH-7 1-7/8 7-3/8
# 3/8 13.0 10.0 7.3 1-1/4 8-3/4 4-3/8 10 2-1/2 10-1/16
7/16 17.0 14.0 10.0 1-1/2 12 4-3/8 15 3-3/8 12-1/2
1/2 22.0 18.0 13.0 1-3/4 12 6 15 3-3/8 12-1/2
9/16 28.0 23.0 16.0 2 14 6 20 4 14-1/16
5/8 35.0 28.0 20.0 2 14 7 25 4-1/4 18-5/16
3/4 50.0 41.0 29.0 2-1/4 16 8 AH-37 4-1/4 18-15/16
LATCH KITS ARE AVAILABLE IF REQUIRED.
RATED CAPACITY (TONS)* ALLOY OBLONG LINK HOOK
LENGTH
ROPEDIAMETER(INCHES) VERTICAL
CHOKERHITCH** 60º 45º 30º A B
SLIP THRUTHIMBLEST
HEAVYTHIMBLEHT
# 1/4 3.7 3.2 7.4 6.4 5.2 3.7 3 6 W-2 1/4
# 3/8 8.3 7.2 17 14 12 8.3 3 6 W-2 3/8
1/2 14 13 29 25 20 14 4 8 W-3 1/2
5/8 23 20 45 39 32 23 5 10 W-4 5/8
3/4 32 28 65 56 46 32 6 12 W-4 3/4
7/8 44 38 87 76 62 44 6-1/2 13 W-5 7/8
1 57 50 113 98 80 57 7 14 W-5 1
1-1/4 87 77 175 151 124 87 8 16 W-6 1-1/4
1-1/2 125 109 249 216 176 125 9 18 W-7 1-1/2
1-3/4 168 147 335 290 237 168 10 20 W-8 1-3/4
2 217 190 433 375 306 217 12 24 W-9 2
Wire Rope Sl ings
51
WIRE RO
PE SLINGS
MULTI-PART BODY SINGLE LEG WIRE ROPE SLINGS
MECHANICAL SPLICE
# Made with 7 x 19 Galvanized component rope.* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.** See Choker Hitch Rated Capacity Adjustment.Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.Rated Capacities based on design factor of 5.Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
9-PART
EYE DIMENSIONSBASKET HITCHRATED CAPACITY (TONS)*
52
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
GROMMETS/STRAND LAID/MECHANICAL SPLICEEXTRA IMPROVED PLOW STEEL
6 x 19 or 6 X 37 classification IWRCRated capacities in tons
ROPE DIAMETER (INCHES) VERTICAL CHOKER
VERTICAL BASKET 60º 45º 30º
1/4 1.1 .74 2.1 1.8 1.5 1.1
5/16 1.6 1.2 3.3 2.8 2.3 1.6
3/8 2.4 1.6 4.7 4.1 3.3 2.4
7/16 3.2 2.2 6.4 5.5 4.5 3.2
1/2 4.1 2.9 8.3 7.2 5.9 4.1
9/16 5.2 3.7 10 9.1 7.4 5.2
5/8 6.4 4.5 13 11 9.1 6.4
3/4 9.2 6.4 18 16 13 9.2
7/8 12 8.7 25 22 18 12
1 16 11 32 28 23 16
1-1/8 20 14 41 35 29 20
1-1/4 25 17 50 43 35 25
1-3/8 30 21 60 52 42 30
1-1/2 36 25 71 62 50 36
1-5/8 41 29 82 71 58 41
1-3/4 48 33 95 83 68 48
1-7/8 54 38 109 94 77 54
2 62 43 124 107 87 62
2-1/8 69 48 138 119 98 69
2-1/4 77 54 154 133 109 77
2-3/8 85 60 171 148 121 85
2-1/2 94 66 188 163 133 94
2-5/8 103 72 207 179 146 103
2-3/4 113 79 225 195 159 113
2-7/8 122 86 245 212 173 122
3 133 93 265 230 188 133
LENG
TH
LENGTH
Note: Min. length is 96 times the rope diameter.
Rated Capacities Basket Hitch based on D/d ratio of 5 where "d" = diameterof the finished grommet.Rated Capacities based on pin diameter no smaller than 5 times the bodydiameter.Rated Capacities based on design factor of 5.Horizontal Sling angles less than 30 degrees shall not be used.
Wire Rope Sl ings
53
WIRE RO
PE SLINGS
CUSTOM SOCKET ASSEMBLIESWire Rope assemblies with fittings permanently attached at ends are custom fabricated for use as boom pendants,guylines, raising lines, backstays, lifting spreaders, etc. These are offered in both poured, or spelter, sockets andmechanically swaged sockets. A Design Factor of five is applied in establishing Rated Capacities shown.
EPOXY COMPOUND SPELTER SOCKET
Epoxy compound is standard as the bonding mediumsurrounding wires inside the socket. Steel forgings are used forrope sizes 1/2" through 1-1/2", and cast steel fittings for largersizes. Larger than 4" available on special order. Assembly lengthis measured from centerline of pin for open sockets and bearingpoint for closed sockets.
Same PlaneOS-OS
Opposite Plane
Same PlaneCS-CS
Opposite Plane
Same PlaneOS-CS
Opposite Plane
ROPEDIAMETER(INCHES) VERTICAL
VERTICAL BASKET
1/2 2.7 4.9
9/16 3.4 6.2
5/8 4.1 7.6
3/4 5.9 11
7/8 8 15
1 10 19
1-1/8 13 24
1-1/4 16 30
1-3/8 19 36
1-1/2 23 42
1-5/8 26 49
1-3/4 31 57
1-7/8 35 64
2 40 73
2-1/8 44 82
2-1/4 49 91
2-3/8 55 101
2-1/2 60 112
2-5/8 66 122
2-3/4 72 134
2-7/8 78 145
3 85 157
3-1/8 92 169
3-1/4 98 182
3-3/8 106 196
3-1/2 113 209LENGTH
54
WIR
E RO
PE S
LIN
GSWire Rope Sl ings
CUSTOM SOCKET ASSEMBLIESIndicate choice of end fittings on purchase orders by the suffixes “OS” or “CS” after the stock number, for open or closedtype fittings. Pins and cotters are supplied as standard on open fittings, but assemblies may be specified without pins.Fittings will be assembled in the same plane unless specified otherwise on the order.
SWAGED SOCKET
In mechanically swaged fittings, high pressure presses andprecision dies cause metal of the socket to flow around wiresand strands to offer the ultimate in compactness andstrength with minimum weight. Material is weldless, drop-forged steel. Normally, only regular lay rope is used. Swagedassemblies are interchangeable with poured sockets upthrough 2" rope diameters. Assembly length is measuredfrom centerline of pins for both open and closed sockets.
ROPEDIAMETER(INCHES) XIP
1/4 .69
5/16 1.05
3/8 1.5
7/16 2.04
1/2 2.66
9/16 3.36
5/8 4.12
3/4 5.88
7/8 7.96
1 10.34
1-1/8 13.0
1-1/4 15.98
1-3/8 19.2
1-1/2 22.8
1-3/4 30.6
2 39.6
2-1/4 49.4
2-1/2 60.4
6 X 19 & 6 X 37IWRC
RATED CAPACITY (TONS)*
Same PlaneOS-OS
Opposite Plane
Same PlaneCS-CS
Opposite Plane
Same PlaneOS-CS
Opposite Plane
LENGTH
Wire Rope Sl ings
55
WIRE RO
PE SLINGS
TUFFY TRI-BRAID SLINGSTUFF AND FLEXIBLE SLINGS, FOR YOUR TOUGHEST, MOST DEMANDING LOADS
Unmatched FlexibilityThe unique 3x3 strand design of all Tuffy tri-braid slings consists of a patentedmachine-braided wire fabric with interlaced construction, resulting in flexibilityand abrasion resistance far superior to standard rope strands. Made of industrial-grade steel and constructed with the highest quality standards, only Tuffy slingspossess the perfect balance of strength, flexibility and durability.
Longer Service LifeBecause machine braiding produces proper balancing of all parts, the outcome isa highly efficient sling with a much longer service life. Even if one of the braidedparts is cut or broken, there is no stranding. Durable and reliable, Tuffy tri-braidslings perform to unprecedented standards, keeping working environments moreproductive and effective.
Quicker and Easier LoadingWorkers now have an easy-to-handle tool that significantly eases and speeds thehitching and unhitching process. Tuffy's flexibility enables greater sling control,and the unique construction yields a safer, more secure sling, significantly lessprone to dangerous recoils and breakage.
Complete Knot and Kink ResistanceTuffy Tri-braid slings are virtually impervious to kinking and knotting due to themachine-braided and interlaced construction. Nothing short of a vice can leave amark on a Tuffy sling, and even then the ridge simply straightens out with nomaterial damage. Where a standard sling's strength can be canceled out ifstiffness imposes abnormal fatigue which saps the sling's endurance, theflexibility and balance built into every tri-braid sling renders this issue obsolete.
56
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
T-2 TRI-BRAID SLING – S INGLE PLY
Single Leg - With Sliding Choker Hook and Thimble BottomApplication: Pipe, bundles, bars, castings, lumber - any type of load that can utilize a choker hook.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
GALV.THIMBLE (1 EA.) (INCHES)
SLIDING CHOKER HOOK (1 EA.) (INCHES)
VERTICAL CHOKER TONS
1/4 3x6 1/4 1/4 0.34
3/8 3x6 3/8 3/8 0.71
1/2 4x8 1/2 1/2 1.3
5/8 5x10 5/8 5/8 2.0
3/4 6x12 3/4 3/4 2.8
7/8 6.5x13 7/8 7/8 3.8
1 7x14 1 1 4.7
1-1/4 8x16 1-1/4 1-1/4 6.8
1-1/2 9x18 1-1/2 1-1/2 9.0
T-1 TRI-BRAID SLING – S INGLE PLY
Standard Eye/Eye Sling – Single LegApplication: General purpose sling for straight or basket hitches.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
WLLVERTICALTONS
VERTICAL BASKET TONS
BASKET60°TONS
BASKET45°TONS
BASKET 30°TONS
1/4 3x6 0.45 0.9 0.78 0.64 0.45
3/8 3x6 0.95 1.9 1.6 1.3 0.95
1/2 4x8 1.7 3.4 2.9 2.4 1.7
5/8 5x10 2.6 5.2 4.5 3.7 2.6
3/4 6x12 3.7 7.4 6.4 5.2 3.7
7/8 6.5x13 5 10 8.7 7.1 5
1 7x14 6.3 13 11 8.9 6.3
1-1/4 8x16 9 18 16 13 9
1-1/2 9x18 12 24 21 17 12
1-3/4 10x20 15 30 26 21 15
2 12x24 20 40 35 28 20
Wire Rope Sl ings
57
WIRE RO
PE SLINGS
T-3D TRI-BRAID SLING – DOUBLE PLY
Single Leg - Two Parts (2 ply) Spliced Together Side-by-SideApplication: When higher capacity are needed (2 ply) such as for locomotives, generators, pressure vessels, etc.
Rated capacity in tons
T-4D TRI-BRAID SLING – DOUBLE PLY
Single Leg - Top eye 2-parts Spliced Together with Double Ply Body with Sliding Choker Hook and Thimble BottomApplication: When higher capacity are needed. More flexibility is provided for choking smaller diameter loads.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
SLIDINGCHOKER HOOK(1 EA.)
GALVANIZEDTHIMBLE(1 EA.) (INCHES)
WLL CHOKERTONS
1/4 3x6 3/8" 1/4 0.68
3/8 4x8 #2 3/8 1.4
1/2 5x10 #4 1/2 2.6
5/8 6x12 #5 5/8 3.5
3/4 7x14 #5 3/4 5.0
7/8 8x16 #6 7/8 6.8
1 8x16 #7 1 8.5
1-1/4 9x18 #8 1-1/4 12.0
ROPEDIAMETER(INCHES)
EYESIZE(INCHES)
WLLVERTICAL TONS
WLL CHOKERTONS
WLLBASKETTONS
1/4 3x6 0.90 0.68 1.80
3/8 4x8 1.90 1.4 3.8
1/2 5x10 3.4 2.6 6.8
5/8 6x12 4.7 3.5 9.4
3/4 7x14 6.7 5.0 13.0
7/8 8x16 9.0 6.8 18.0
1 8x16 11.0 8.5 23.0
1-1/4 9x18 16.0 12.0 32.0
1-1/2 10x20 22.0 17.0 43.0
1-3/4 11x22 27.0 20.0 54.0
58
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
T-6 TRI-BRAID SLING – S INGLE PLY
2-Leg Bridle Sling with Equalizing Thimble Top and Hooks BottomApplication: For oddly shaped loads - high one end, low other - legs adjust and equalize.
Rated capacity in tons
T-5 TRI-BRAID SLING – DOUBLE PLY
Single Leg - 2 Side-by-Side Parts with Crescent Thimble in Bottom LoopApplication: Gives move stability than single part for handling such loads as tanks, coils, castings, barrels and boxes.
Rated capacity in tons
ROPEDIAMETER(INCHES)
EYESIZE(INCHES)
EQUALIZINGTHIMBLE(1 EA.)
ALLOYEYE HOOK(2 EA.)
WLL VERTICAL TONS
WLL60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 3E 1 Ton 0.9 0.78 0.64 0.45
3/8 3x6 3E 1.5 Ton 1.9 1.6 1.3 0.95
1/2 4x8 4E 3 Ton 3.4 2.9 2.4 1.7
5/8 5x10 6E 5 Ton 5.2 4.5 3.7 2.6
3/4 6x12 6E 5 Ton 7.4 6.4 5.2 3.7
7/8 6.5x13 8E 7 Ton 10.0 8.7 7.1 5.0
1 7x14 8E 11 Ton 13.0 11.0 8.9 6.3
1-1/4 8x16 10E 15 Ton 18.0 16.0 13.0 9.0
1-1/2 9x18 12E 15 Ton 24.0 21.0 17.0 12.0
1-3/4 10x20 14E 22 Ton 30.0 26.0 21.0 15.0
2 12x24 16E 30 Ton 40.0 35.0 28.0 20.0
ROPEDIAMETER(INCHES)
EYESIZE(INCHES)
CRESCENT THIMBLE (1 EA.)
WLL CHOKER TONS
1/4 3x6 6C 0.68
3/8 4x8 6C 1.4
1/2 5x10 8C 2.6
5/8 6x12 9C 3.9
3/4 7x14 10C 5.6
7/8 8x16 14C 7.5
1 8x16 16C 9.5
1-1/4 9x18 20C 14.0
Wire Rope Sl ings
59
WIRE RO
PE SLINGS
T-7D TRI-BRAID SLING – DOUBLE PLY
2-Leg Bridle Sling - Double Ply with Link Top and Hooks with Thimbles BottomApplication: When higher capacities are needed.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(IN.)
GALVANIZEDTHIMBLE(2 EA.) (IN.)
MASTERLINK(O)OR PEARLINK(P)(1 EA.) (INCHES)
ALLOY EYE HOOK(2 EA.)
WLLVERTICALTONS
WLL 60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 1/4 5/8 P 1.5 Ton 1.8 1.60 1.30 0.90
3/8 4x8 3/8 7/8 P 3 Ton 3.8 3.3 2.7 1.90
1/2 5x10 1/2 1-1/4 P 5 Ton 6.8 5.9 4.8 3.4
5/8 6x12 5/8 1-1/4 O 7 Ton 9.4 8.1 6.6 4.7
3/4 7x14 3/4 1-1/2 O 11 Ton 13.0 12.0 9.4 6.7
7/8 8x16 7/8 1-3/4 O 15 Ton 18.0 16.0 13.0 9.0
1 8x16 1 1-3/4 O 15 Ton 23.0 20.0 16.0 11.0
1-1/4 9x18 1-1/4 2-1/8 O 30 Ton 32.0 28.0 23.0 16.0
1-1/2 10x20 1-1/2 2-1/2 O 37 Ton 43.0 37.0 31.0 22.0
1-3/4 11x22 1-3/4 2-3/4 O 45 Ton 54.0 47.0 38.0 27.0
T-8 TRI-BRAID SLING – S INGLE PLY
2-Leg Bridle Sling with Link Top and Sliding Choker Hooks with Thimbles BottomApplication: Helps eliminate load rotation and is better suited for handling pipe, bars, timber, tanks, castings and otherloads which run in long lengths.
Rated capacity in tons
ROPEDIAMETER(INCHES)
EYESIZE(IN.)
GALVANIZEDTHIMBLE(2 EA.) (INCHES)
MASTERLINK(O)OR PEARLINK(P)(1 EA.)(INCHES)
SLIDINGCHOKERHK (2EA.)(INCHES)
WLLVERTICALTONS
WLL 60°TONS
WLL 45°TONS
WLL30°TONS
1/4 3x6 1/4 1/2 P 1/4 0.68 0.58 0.48 0.34
3/8 3x6 3/8 1/2 P 3/8 1.40 1.2 1.0 0.71
1/2 4x8 1/2 3/4 P 1/2 2.6 2.2 1.8 1.3
5/8 5x10 5/8 7/8 P 5/8 3.9 3.4 2.8 2.0
3/4 6x12 3/4 1-1/4 P 3/4 5.6 4.8 3.9 2.8
7/8 6.5x13 7/8 1-1/4 P 7/8 7.5 6.5 5.3 3.8
1 7x14 1 1-1/4 O 1 9.5 8.2 6.7 4.7
1-1/4 8x16 1-1/4 1-1/2 O 1-1/4 14.0 12.0 9.5 6.8
1-1/2 9x18 1-1/2 1-3/4 O 1-1/2 18.0 16.0 13.0 9.0
60
Wire Rope Sl ingsW
IRE
ROPE
SLI
NGS
T-12 TRI-BRAID SLING – S INGLE PLY
Standard 2-Leg Bridle Sling – Link Top/Hooks BottomApplication: Lifting machinery, castings, motors and aircraft assemblies.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
ALLOYEYE HOOK(2 EA.)(IN.)
MASTERLINK(O) OR PEARLINK(P)(1 EA.) (INCHES)
WLLVERTICALTONS
WLL60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 1 Ton 1/2 P 0.90 0.78 0.64 0.45
3/8 3x6 1.5 Ton 5/8 P 1.90 1.6 1.3 0.95
1/2 4x8 3 Ton 7/8 P 3.4 2.9 2.4 1.7
5/8 5x10 5 Ton 1 P 5.2 4.5 3.7 2.6
3/4 6x12 5 Ton 1-1/4 P 7.4 6.4 5.2 3.7
7/8 6.5x13 7 Ton 1-1/4 O 10.0 8.7 7.1 5.0
1 7x14 11 Ton 1-1/2 O 13.0 11.0 8.9 6.3
1-1/4 8x16 15 Ton 1-3/4 O 18.0 16.0 13.0 9.0
1-1/2 9x18 15 Ton 1-7/8 O 24.0 21.0 17.0 12.0
1-3/4 10x20 22 Ton 2 O 30.0 26.0 21.0 15.0
2 12x24 30 Ton 2-1/2 O 40.0 35.0 28.0 20.0
T-9 TRI-BRAID SLING – S INGLE PLY
2-Leg Double Loop Bridle Sling – Link Top and No HooksApplication: Well suited for handling sheet steel, bar stock, lumber, structural shapes, flasks and castings.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
MASTERLINK(O) OR PEARLINK(P) (1 EA.)(INCHES)
WLLVERTICAL TONS
WLL60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 5/8 P 1.8 1.6 1.3 0.9
3/8 3x6 7/8 P 3.8 3.3 2.7 1.9
1/2 4x8 1-1/4 P 6.8 5.9 4.8 3.4
5/8 5x10 1-3/8 O 10.0 9.0 7.4 5.2
3/4 6x12 1-1/2 O 15.0 13.0 10.0 7.4
7/8 6.5x13 1-3/4 O 20.0 17.0 14.0 10.0
1 7x14 1-7/8 O 25.0 22.0 18.0 13.0
1-1/4 8x16 2-1/4 O 36.0 31.0 25.0 18.0
1-1/2 9x18 2-1/2 O 48.0 42.0 34.0 24.0
1-3/4 10x20 2-3/4 O 60.0 52.0 42.0 30.0
2 12x24 3-1/4 O 80.0 69.0 57.0 40.0
Wire Rope Sl ings
61
WIRE RO
PE SLINGS
T-14 TRI-BRAID SLING – S INGLE PLY
Standard 4-Leg Bridle Sling – Link Top/Hooks BottomApplication: Use when extra stamina is needed for heavy, bulky loads such as ship sections, planer beds, founders molds,pressure vessels, etc.
Rated capacity in tonsROPE
DIAMETER(INCHES)
EYESIZE(INCHES)
ALLOYEYE HOOK(4 EA.)
MASTERLINK(O)OR PEARLINK(P)(1 EA.) (INCHES)
WLLVERTICALTONS
WLL60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 1 Ton 5/8 P 1.80 1.60 1.30 0.90
3/8 3x6 1.5 Ton 7/8 P 3.80 3.3 2.7 1.90
1/2 4x8 3 Ton 1-1/4 P 6.8 5.9 4.8 3.4
5/8 5x10 5 Ton 1-3/8 O 10.0 9.0 7.4 5.2
3/4 6x12 5 Ton 1-1/2 O 15.0 13.0 10.0 7.4
7/8 6.5x13 7 Ton 1-3/4 O 20.0 17.0 14.0 10.0
1 7x14 11 Ton 1-7/8 O 25.0 22.0 18.0 13.0
1-1/4 8x16 15 Ton 2-1/4 O 36.0 31.0 25.0 18.0
1-1/2 9x18 15 Ton 2-1/2 O 48.0 42.0 34.0 24.0
1-3/4 10x20 22 Ton 2-3/4 O 60.0 52.0 42.0 30.0
2 12x24 30 Ton 3-1/4 O 80.0 69.0 57.0 40.0
T-13 TRI-BRAID SLING – S INGLE PLY
Standard 3-Leg Bridle Sling – Link Top/Hooks BottomApplication: Lifting dies, castings and assemblies which must be placed carefully, sometimes in difficult locations.
Rated capacity in tonsROPEDIAMETER(INCHES)
EYESIZE(INCHES)
ALLOYEYE HOOK(3 EA.)
MASTERLINK(O)OR PEARLINK(P)(1 EA.) (INCHES)
WLLVERTICALTONS
WLL60°TONS
WLL45°TONS
WLL30°TONS
1/4 3x6 1 Ton 5/8 P 1.40 1.20 0.95 0.68
3/8 3x6 1.5 Ton 3/4 P 2.90 2.5 2.0 1.40
1/2 4x8 3 Ton 1 P 5.1 4.4 3.6 2.6
5/8 5x10 5 Ton 1-1/4 P 7.8 6.8 5.5 3.9
3/4 6x12 5 Ton 1-1/4 O 11.0 9.6 7.8 5.6
7/8 6.5x13 7 Ton 1-1/2 O 15.0 13.0 11.0 7.5
1 7x14 11 Ton 1-3/4 O 19.0 16.0 13.0 9.5
1-1/4 8x16 15 Ton 1-7/8 O 27.0 23.0 19.0 14.0
1-1/2 9x18 15 Ton 2-1/4 O 36.0 31.0 25.0 18.0
1-3/4 10x20 22 Ton 2-1/2 O 45.0 39.0 32.0 23.0
2 12x24 30 Ton 2-3/4 O 60.0 52.0 42.0 30.0
top related