wing formwork table system rev 02 - fowler hoists scaffolding & formwork formwork tab… ·...
Post on 09-May-2018
222 Views
Preview:
TRANSCRIPT
The last few years have seen a large decline in qualified Formworkers (skilled labour)making the delivery of any Structure a challenge. Along with the increased safety awareness and demands for quicker programme construction cycle time it was time to pave the way for the future of the Formwork industry.
Here is a system that is tested and complies to AS3610, it consists of a galvanised steel frame ready to go requiring very little assembly. Table sizes vary to optimise and suit various slab and grid layouts.
The largest table size consist of 21m2 of soffit when the wings a fully erected and 8.6m2 collapsed, a perfect fit for a material hoist or a loading platform.
The largest panel size is designed to fit onto a standard truck bed eliminating wide load deliveries.The critical path in every building is the structure itself and the early entry of service trades. Stripping times are dramatically increased and without any mess left behind it allows the early entry of service trades.
It is evident this innovative system has been thought through, tested and delivered. We hope you share the same view as we are at your disposal to assist with early structure planning, slab/beam optimisation, programming and budgeting.
Introduction
Advantages
Critical Path, (early entry of Service Trades) Increase in Productivity Elimination of Manual Handling Elimination of Falls from heights Quick and Easy stripping Positive propping, quicker table strike Clean working areas and walkways 1 day formwork cycle, 650m2 Able to be utilised as a wall formwork Low carbon foot print A reusable investment unlike traditional timber formwork
Wing Tables- Collapsed to fit into a material hoist or loading platform- Wings opened with a Hydraulic Lifter (21m2 of soffit)- Wings collapsed with a hydraulic lifter (8.6m2)- Perfect fit for a materials hoist or a loading platform - Clean and accessible work areas, no trip hazards and no mess- No falls form height or manual handling
Hydraulic Lifter- Electric/Hydraulic Lifter to collapse and open both wings to achieve (21m2 of soffit)- Designed and Engineered specifically for the wing table system
Table Transporter (wings folded)
- Electric Table Mover to relocate tables without the means of manual handing - Designed and Engineered specifically for the table system
Stripping - Quick, easy and safe stripping - Clean working areas and walkways- Early entry of Services Trades - Positive propping, quicker table strike
Back Propping- Safety combined with early handover of Service Trades - An Innovative System that actually woks and delivers on its promise- Positive propping, quicker table strike- Potential propping range from 2.65m to 5.2m from one prop & extension
Forming Step Downs - A new initiative on forming step downs- Folded 0.6mm pre galvanised sheets, folded to specific depths- Quick and easy install with the use of a specialised staple gun- Punched tabs allows for leave behind embedment which eliminates stripping and mess - Packed and delivered in rolling stillage's
Edge boards- Light weight steel frame lined with plywood- Designed to suit protruding PT cable live ends - Can be made to suit a radial building profile if required - Plumbing and alignment bolts, quick installation - Stripping is clean and quick - A reusable investment, no wastage on timber and plywood
Void Formers- The wing table system is designed to suit various slab beam/slab widths and depths, in some areas where a set down is required the void former used- Light weight but strong enough to support the concrete as a form
top related