we dont just go with the flow, we create it.. who is mp pumps? established in 1942 right-sized pump...

We don’t just go with the flow, we create it.

Who is MP Pumps?

• Established in 1942• Right-sized pump company

• Small enough to be creative• Large enough to handle high volume orders• Custom pump capabilities

• ISO 9001 and 14001 certified• Lead times within 10 working days• Machining and assembly done in Fraser, MI.

• That’s in the USA!

Company Capabilities

• Design• Research & Development• Machining & Assembly• Quality Control• Customer Service• Technical Support• Sales Support• Global Sales

• Industrial• Marine• Agricultural• Transportation• Warewash• Petroleum• Military

Key Markets Served

Product Line

™

™

• The Original self priming pump of it’s kind! • Made in the U.S.A. since 1956. • Available from 1 ½” NPT to 4” NPT.• Lift capabilities up to 25’• Close coupled, pedestal, hydraulic, and engine

drives available• Multiple impeller options to maximize performance• Available in cast iron, stainless steel, bronze, and

aluminum

• Bronze pumps constructed with Federalloy I-836 (no lead)

• ABS type approval for FM 8,15, 30, and 40• Agricultural flanges available• Flomax also offers the “Cadillac” of double seals with

its charged grease cartridge offering lasting protection against dry-run conditions.

• Pump ends are backed with a 2 year warranty!• Our Flomax is even better today and here’s why…

Flomax pumps – Design improvements

O-ring seal for discharge flange

O-ring seal between the housing and adapter

Fill port for priming chamberBosses drilled and

tapped for wear plate

Flomax Applications

• Filtration• Dewatering• Mining• Bilge• Ballast Transfer• DEF• Fertilizer Transfer• Water parks-water

falls

• Fire protection• Potable water• HVAC• Deicing• Sump• Machine coolant • Fish farms

• Investment Cast to Last!• Cast 316 SS pump for your critical applications• No thin wall stampings or welds• Close coupled, pedestal, hydraulic, and engine

drives available• Competitive pricing• Nickel Aluminum Bronze material (CF 1-4)

• Excellent for warm sea water applications

Chemflo Applications• Pharmaceutical• Chemical transfer• DEF (Diesel Exhaust Fluid) – for larger volume transfer in

stationary bulk transfer applications• Potable water• Deicing – spraying salt brine on roads or landing strips for

pretreatment • Desalination• Breweries

• The STANDARD that MP Pumps was built around.

• Also known as our Series pumps• Sizes from 1” X ¾” up to 4” X 3” ports• Flows up to 900 GPM and heads up to 172’• Cast iron and bronze materials available• Some models available with double grease seal• Discharge port can be moved in 90° increments • Open and enclosed impellers

Series Applications

• Cooling towers• Chillers• Washers• Water boosting • Potable water• Machine coolant• HVAC• Scrubbers• Filtration

• A little pump with a lot of value!• Stainless steel pumps for lower flow transfer of

fluids from water to chemicals to petroleum.• Available from ½” up to a 1 ¼ ” X 1” pump• Patented ¾” self priming unit!• AC, DC, and Hydraulic drives available• ISO 8846 marine ignition proof motor available• Self-primer lifts up to 12’• Solves those small pump application needs!

FRX Applications

• Circulating• Dispensing• Low volume transfer• DEF (Diesel Exhaust Fluid) – for bulk to tote,

tote to tote and small metering and dispensing• Marine a/c units• Bait well circulation• Ware wash• Marine hydraulics cooling

• The only pump you want to use for transferring ANY type of fuel.

• Three distinct versions of self-priming and end suction centrifugals.

• Extensive R & D to ensure proper materials• Ductile iron• Silicon carbide seals• Optimal motor enclosures

• Versatility of our PumPak® option

• Close coupled with drives to 20 HP• Space savings

• Price advantage• Economical alternative for today’s petroleum

market place• Curves written specifically for petroleum

products• Made in the USA

Petroleum pumps – Compatibility labels

Compatibility label for PO/SO units.

Compatibility label for PG/SG units.

Compatibility label for PE/SE units

Petrolmaxx Applications

• Bulk transfer• Rail car loading & unloading• Barge loading and unloading• Locomotive refueling• Aircraft fuel transfer• Military vehicles refueling• Fuel transport trailers• Agriculture fuel carts

• Designed for fire suppression, this pump offers higher head pressures; over 200’ for a 2” X 2” pump.

• 1 ½” and 2” models in cast iron or bronze• Close coupled, pedestal, engine, and hydraulic

drive options• ABS type approval for marine operations• Meets USCG 46 CFR requirements• HHLF “High Output” is here!!

High Head / Low Flow Series

HHLF “HIGH OUTPUT”

HHLF Applications

• Fire Control• High head applications over 200’• Mine dust control• Wash down for barns, ships, etc.• Bilge pump

• Cost leader vs. competition• Close coupled, compact size requires less space

than competition• Application temperatures up to 650°F• Seal cavity temperatures of <350°F• No cooling water needed, reduces auxiliary

equipment, and opportunity for oil/water mixing• Impeller is closer to supporting bearing• Less heat transferred out of the system; less

energy required to be replaced

Hot Oil Pump

Tempuflo Applications

• Heat transfer heat exchangers • Circulate hot oil thru:

• tanks• presses and platens• molds• mixers• dryers

• Line tracing applications• Fryers in the food industry• Airplane deicing

• Let MP take out the trash!• Available in 2” and 3” NPT sizes• Close coupled or pedestal designs • Passes solids up 1 ½” • Hydraulic drive option for 3” model• Back pull out design and front clean out make

for ease of maintenance.• 2 and 3 blade impeller designs to maximize

pump performance.

Self-Priming Trash Pump

• Dewatering• Waste water treatment• Machine coolant• Fish farms• Filtration• Sumps

2CT Applications

• For years MP Pumps has been a major provider of pumps used in the transportation industry.

• Function as coolant booster and circulation pumps• Four distinct models: FRX, ILX, SBX, MDX• Brushed and brushless DC motors• Sold primarily through our network of

transportation distributors and OEM customers• Flows up to 25 GPM and head ratings of up to 20’

• Metro buses• School buses• Motor homes• Airport shuttles• Limousines• Line stripping trucks

Circulator Applications

Submersible Series

• Hook up the hydraulic lines, drop it in creek or pit and let it run!

• Available in 2”, 2 ½”, and 3” discharge ports.• Various size hydraulic motors for optimal performance• Cast aluminum body = light weight• Will pass “pea gravel” sized particles• Also available with a screw impeller for more viscous

applications like drillers mud.

Hydrasub Applications

• Electric submersibles an issue?• Hydraulics available?• Mines• Industrial plants• Manholes• Remote locations w/no electric service

• hydraulics available from a truck or tractor• flooded fields or ditches

• Condensate pits too hot for electric motors

S700 / BASE ASSEMBLY

COUPLING GUARD

BASE

PEDESTAL RISER

MOTOR RISER

GUARD RISER

COUPLING (NOT SHOWN)COUPLING GUARD

RING GUARD(OSHA COMPLIANT)

(# 7 GAGE COLD ROLL STL)

Base assembly components

What are we talking about?MP Pump Abbreviations

21339 FM8 PMP C: PED 5.0 ??? ??? ??

MP part #

Pump model and size

Pump or Pumpak

Housing material of construction

How the pump is driven

Impeller diameter

Any additional features

What are we talking about?MP Pump Abbreviations cont.

• A full abbreviation list can be found on the MP Pumps web site under the pricing link.

• As always, you can call our customer service department with any questions on description and they will be happy to help.

• Main web site:– http://www.mppumps.com

• Product catalogs• Sales brochures• I.O.M. manuals• Pricing• Parts lists• Abbreviation list

Web Site

Webinar series continues

• Coming in July 2012 will be our fourth webinar dedicated to our HHLF product line.

• We will be excited to share our new “HHLF-HO”, the high output HHLF!

• Please remember to check out our website at www.mppumps.com