we build trust catalogue product roof tile
Post on 18-Oct-2021
8 Views
Preview:
TRANSCRIPT
PRODUCT
CATALOGUE ROOF TILE
WE BUILD TRUST
YEARSguarantee
2
NATURAL MATERIALIt was the Chinese who fi rst started covering their roofs with clay roof tile 10.000 years B.C. Later on roof tile was used in the Middle East. Roof tile was used by different cultures around the world as they wanted roofs not only to be durable and fi re and weather resistant but also pretty. Roof tile has remained in use till today although it has seen certain changes in design, way of production and application. Lately, roof tile has experienced true renaissance together with awareness about healthy and ecologically acceptable life as roof tile is made of entirely natural materials. Considering that duration period of roof tile is minimum half a century, once you decide to cover the roof with certain roof tile, you have made a life long decision.
DESIGNDue to their continental design and grooves intended for fast precipitation dewatering, double interlocking Nexe roof tiles Glinex and large size roof tile Cezar are intended for continental regions. Geometry of products is designed to create roof tiles with large moving area (up to 5 cm for CEZAR) and supreme sealing properties (double sealing system) thus increasing security and diversity of application. Nexe roof tiles Mediteran and large size roof tiles Oktavijan and Dioklecijan are adjusted for use in Mediterranean regions. For several years now Mediterranean roofs have been covered with Mediteran roof tile. This type of tile is appropriate for low roof slopes and strong gust due to its design and high waves. With its increased sealings it stops water penetration and roof integration. Nexe large size roof tile Dioklecijan and Oktavijan can be found on Mediterranean roofs as well. Dioklecijan and Oktavijan are appropriate for both Mediterranean and continental roofs due to their design and excellent sealing properties. Minimum slope for covering with Nexe roof tiles is 17°.
QUALITY AND GUARANTEEQuality roof is enduring in all weather conditions, waterproof, longlasting, easy to install, easy to maintaine. Quality roof must be easy to reconstruct and must be ecologically acceptable. All above characteristics apply to Nexe roof tile. Quality of our roof tile is guaranteed by numerous acknowledgments and certifi cates which we received as sign of top quality, tradition, ecological awareness and contribution to sustainable development. All NEXE roof tiles have product quality guarantee of at least 30 years. If the Buyer decides to buy complete roof system NEXE KROV PLUS with roofi ng equipment he is entitled to extended guarantee of 30+10 years.
3
4
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 4.0
Roof tile consumption per m2 of roof (pcs) App 10
Roof load (kg/m2) App 40
Roof load (kN/m2) App 0.40
Covering dimensions (mm) App 410x250
Laying of fi rst batten-eave (mm) App 350
Recommended batten distance (mm) App 400
Minimum batten distance (mm) App 350
Maximum batten distance (mm) App 405
Recommended covering width (mm) App 250
Batten consumption (m’/m2) App 2.5
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 240
Roof tiles in packing (pcs) 5
Pallet dimensions (mm) App 1020x965
Packing weight (kg) App 1000
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
CEZARCezar is large size roof tile which with its quality, color and design represents unique combination for roof. It is especially adjusted to use in continental regions. Characteristics of this roof tile are large moving distance (up to 5 cm) and supreme sealig properties (double sealing system) thus increasing safety and diversity of application. Main characteristic of this roof tile is its size (10 pcs/m2) which substantially affects material consumption, speed of construction and fi nally represents better cost effectiveness. This roof tile is available in following colors: natur, red, black lux, brown lux.
NATUR - ENGOBE RED
BLACK LUX BROWN LUX
SPECIAL ROOF TILE CEZAR
END TILE - RIGHT
HALF OF TILE HOLLOW TILE FRONT PLATE – RIDGE TILE END PLATE - RIDGE TILE
END TILE - LEFT VENTILATION TILE SNOWFENCE
RIDGE –BEGINNING
HALF O
ROOSTER
Range hood –connection
Ridge distributor
HRN EN 1304:2005
5
250 250
CORRECT ROOF BATTENING - CEZAR
TEMPLATE FOR BATTEN DISTANCE (always two same pieces are made)
BATTEN FOR RIDGE TILE
DIRECTION OF ROOF TILE ARRANGING
FIRST BATTEN
COVERING DIMENSIONS
Length: 410 mmWidth: 250 mm
410
410
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pcs of roof tile at construction site as sample.- line them up on straight surface (concrete or board), facedown.- measure the distance of 10 extended roof tiles (L1) and then distance
of compacted roof tiles (L2).
Recommended batten distance (mm) L = 400
Recommended distance of fi rst batten (mm) Lx = 350
Extended
L= (mm)L1 + L2
20
Compacted
L1 Extended (10 pcs)
L2 Compacted (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 80 mm 50 mm 40 mm
Position of batten for ridge tile “h” 105 mm 85 mm 85 mm
6
HRN EN 1304:2005
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 4.0
Roof tile consumption per m2 of roof (pcs) App 10
Roof load (kg/m2) App 40
Roof load (kN/m2) App 0.40
Covering dimensions (mm) App 400x250
Laying of fi rst batten-eave (mm) App 350
Recommended batten distance (mm) App 400
Minimum batten distance (mm) App 392
Maximum batten distance (mm) App 405
Recommended covering width (mm) App 250
Batten consumption (m’/m2) App 2.5
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 240
Roof tiles in packing (pcs) 5
Pallet dimensions (mm) App 1020x965
Packing weight (kg) App 1000
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
OKTAVIJANOktavijan is large size tile that by its quality, color and design represents unique combination for roof. It is especially adjusted for application in continental and mediterranean regions.
Main characteristic is its size (10 pcs/m2) what signifi cantly affects material consumption and speed of construction and fi nally represents better cost-effectivness. This roof tile is available in following colors: natur, red, black lux, brown lux.
NATUR - ENGOBE RED
BLACK LUX BROWN LUX
SPECIAL ROOF TILE OKTAVIJAN
RIDGE – BEGINNING
ROOSTER
RANGE HOOD – CONNECTION
RIDGE DISTRIBUTOR
END TILE - RIGHTRIDGE TILE - UNDER
FRONT PLATE – RIDGE TILE
END PLATE -RIDGE TILE
END TILE - LEFT
RIDGE TILE -UNDER RIGHT
RIDGE TILE - UNDER LEFT
SNOWFENCEVENTILATION TILE
HOLLOW TILE
7
400
400
250
L = 400
550
L = 400
CORRECT ROOF BATTENING-OKTAVIJAN
TEMPLATE FOR BATTEN DISTANCE(always two same pieces are made)
BATTEN FOR RIDGE TILE
FIRST BATTEN
COVERING DIMENSIONS
Length: 400 mmWidth: 250 mm
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pcs of roof tile at construction site as sample.- line them up on straight surface (concrete or board), facedown.- measure the distance of 10 extended roof tiles (L1) and then distance
of compacted roof tiles (L2).
Recommended batten distance (mm) L = 400
Recommended distance of fi rst batten (mm) Lx = 350
Extended
L= (mm)L1 + L2
20
Compressed
L1 Extended (10 pcs)
L2 Compressed (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 60 mm 50 mm 40 mm
Position of batten for ridge tile “h” 115 mm 95 mm 85 mm
DIRECTION OF ROOF TILE ARRANGING
8
DIOKLECIJANDioklecijan is large size roof tile that by its quality, color and design represents unique roof combination. It can be applied in various ways. Roof tile is intended for both continental and mediterranean regions. Characteristics of this roof tile are supreme sealing properties (double sealing system) which improve safety and diversity of application. Consumption of only 11 pcs/m2 represents ideal solution because it accelerates construction and fi nally represents good cost effectiveness. Roof tile is additionally protected by engobe and is available in four standard colors- natur, red, black and brown lux.
HRN EN 1304:2005
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 3.80
Roof tile consumption per m2 of roof (pcs) App 11
Roof load (kg/m2) App 40
Roof load (kN/m2) App 0.40
Covering dimensions (mm) App 375x240
Laying of fi rst batten-eave (mm) App 350
Recommended batten distance (mm) App 380
Minimum batten distance (mm) App 375
Maximum batten distance (mm) App 385
Recommended covering width (mm) App 240
Batten consumption (m’/m2) App 2.5
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 240
Roof tiles in packing (pcs) 5
Pallet dimensions (mm) App 1020x965
Packing weight (kg) App 1000
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
NATUR - ENGOBE RED
BLACK LUX BROWN LUX
SPECIAL ROOF TILE DIOKLECIJAN
FRONT PLATE – RIDGE TILE
END PLATE - RIDGE TILE
END TILE - RIGHT VENTILATION TILE SNOWFENCE RIDGE TILE - UNDER
RIDGE TILE - RIGHT RIDGE TILE - LEFT
END TILE - LEFT
HOLLOW TILE
RIDGE – BEGINNING
RANGE HOOD – CONNECTION
RIDGE DISTRIBUTOR
ROOSTER
9
250 250
CORRECT ROOF BATTENING-DIOKLECIJAN
TEMPLATE FOR BATTEN DISTANCE(always two same pieces are made)
BATTEN FOR RIDGE TILE
FIRST BATTEN
COVERING DIMENSIONS
Length: 375 mmWidth: 240 mm
410
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pcs of roof tile at construction site as sample.- line them up on straight surface (concrete or board), facedown.- measure the distance of 10 extended roof tiles (L1) and then distance
of compacted roof tiles (L2).
Recommended batten distance (mm) L = 380
Recommended distance of fi rst batten (mm) Lx = 340
Extended
L= (mm)L1 + L2
20
Compressed
L1 Extended (10 pcs)
L2 Compressed (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 60 mm 50 mm 40 mm
Position of batten for ridge tile “h” 115 mm 95 mm 85 mm
DIRECTION OF ROOF TILE ARRANGING
10
HRN EN 1304:2005
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 3.10
Roof tile consumption per m2 of roof (pcs) App 13
Roof load (kg/m2) App 40.3
Roof load (kN/m2) App 0.403
Covering dimensions (mm) App 370x215
Laying of fi rst batten-eave (mm) App 320
Recommended batten distance (mm) App 360
Minimum batten distance (mm) App 355
Maximum batten distance (mm) App 365
Recommended covering width (mm) App 215
Batten consumption (m’/m2) App 3.0
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 300
Roof tiles in packing (pcs) 6
Pallet dimensions (mm) App 1180x850
Packing weight (kg) App 1000
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
GLINEXGlinex kontinental and rustik are roof tiles of exceptional quality, continental type, double interlocking with nail hole. These are clay roof tiles with average weight of 3,1 kg, consumption of 13 pcs per 1 m2 of roof. Glinex enables tolerance upon laying and recommended roof slope is 30 °. Together with Glinex kontinental we deliver all additional elements for roof covering (end tile and ventilation tile).
KONTINENTAL RUSTIK
SPECIAL ROOF TILE GLINEX-KONTINENTAL AND RUSTIK
END TILE - RIGHT
VENTILATION TILE FRONT PLATE – RIDGE TILE
RIDGE TILEFINAL PLATE -
RIDGE TILE
END TILE - LEFT END TILE - RIGHT 1/2 END TILE - LEFT 1/2 SNOWFENCE
RANGE HOOD – CONNECTION
ROOSTER
11
CORRECT ROOF BATTENING - GLINEX
TEMPLATE FOR BATTEN DISTANCE(always two same pieces are made)
BATTEN FOR RIDGE TILE
FIRST BATTEN
COVERING DIMENSIONS
Length: 370 mmWidth: 215 mm
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pcs of roof tile at construction site as sample.- line them up on straight surface (concrete or board), facedown.- measure the distance of 10 extended roof tiles (L1) and then distance
of compacted roof tiles (L2).
Recommended batten distance (mm) L = 360
Recommended distance of fi rst batten (mm) Lx = 320
Extended
L= (mm)L1 + L2
20
Compressed
L1 Extended (10 pcs)
L2 Compressed (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 50 mm 40 mm 30 mm
Position of batten for ridge tile “h” 110 mm 90 mm 85 mm
215
370
DIRECTION OF ROOF TILE ARRANGING
12
GLINEX PREMIUMGlinex premium premium is top quality continental roof tile, double interlocking with nail hole. Main advantage of this roof tile is possibility of sliding battening what makes it perfect for both new buildings and repair of existing roofs. Large moving area and reduced roof load of only 39 kg/m2 make this roof tile easy to apply what fi nally contributes to investment savings.
PREMIUM
HRN EN 1304:2005
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 3.10
Roof tile consumption per m2 of roof (pcs) App 12.6
Roof load (kg/m2) App 39
Roof load (kN/m2) App 0.39
Covering dimensions (mm) App 345x228
Laying of fi rst batten-eave (mm) App 320
Recommended batten distance (mm) App 350
Minimum batten distance (mm) App 330
Maximum batten distance (mm) App 360
Recommended covering width (mm) App 228
Batten consumption (m’/m2) App 3.0
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 350
Roof tiles in packing (pcs) 6
Pallet dimensions (mm) App 1180x850
Packing weight (kg) App 1120
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
SPECIAL ROOF TILE - GLINEX PREMIUM
FRONT PLATE – RIDGE TILE
RIDGE TILE
END PLATE -RIDGE TILE
VENTILATION TILEHALF OF ROOF TILE
ROOSTER
13
250 250
CORRECT ROOF BATTENING - GLINEX PREMIUM
TEMPLATE FOR BATTEN DISTANCE(always two same pieces are made)
BATTEN FOR RIDGE TILE
FIRST BATTEN
COVERING DIMENSIONS
Length: 345 mmWidth: 228 mm
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pcs of roof tile at construction site as sample.- line them up on straight surface (concrete or board), facedown.- measure the distance of 10 extended roof tiles (L1) and then distance
of compacted roof tiles (L2).
Recommended batten distance (mm) L = 350
Recommended distance of fi rst batten (mm) Lx = 310
Extended
L= (mm)L1 + L2
20
Compressed
L1 Extended (10 pcs)
L2 Compressed (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 60 mm 50 mm 40 mm
Position of batten for ridge tile “h” 110 mm 90 mm 85 mm
228
345
345
DIRECTION OF ROOF TILE ARRANGING
14
MEDITERAN/MEDITERAN ANTIKNexe roof tile Mediteran represents ideal solution if your roof is located in coastal area or if it is exposed to frequent and strong winds. Consumption of 13,2 pcs/m2 and weight of 3,6 kg Mediteran roof tile is easily and quickly installed on every roof. Roof tile is designed so as to reduce the load from wind blows by its excellent sealing properties (double sealing system) and high wave and thus increases construction safety. On every roof tile there is a nail hole that enables safe fastening on roof batten. Water impermeability is guaranteed even on extremely small slopes of roof construction what enables diversity of application of this type of roof tile. (minimum slope 17°). Mediteran is delivered in natur and antik colors givig the roof special architectural value.
MEDITERAN MEDITERAN ANTIK
HRN EN 1304:2005
RIDGE TILE - UNDER VENTILATION TILE
FRONT PLATE – RIDGE TILE
RIDGE TILE
END PLATE – RIDGE TILE
SPECIAL ROOF TILE MEDITERAN
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 3.60
Roof tile consumption per m2 of roof (pcs) App 13.2
Roof load (kg/m2) App 47,6
Roof load (kN/m2) App 0.476
Covering dimensions (mm) App 360x210
Laying of fi rst batten-eave (mm) App 320
Recommended batten distance (mm) App 360
Minimum batten distance (mm) App 355
Maximum batten distance (mm) App 365
Recommended covering width (mm) App 210
Batten consumption (m’/m2) App 3.0
Counterbatten consumption (m’/m2) App 1.4
Packing - 4 rows (pcs/pallet) 240
Roof tiles in packing (pcs) 6
Pallet dimensions (mm) App 1180x850
Packing weight (kg) App 900
Recommended roof slope 30º
Minimum roof slope App 22º
Minimum roof slope(with underconstruction) App 17º
RANGE HOOD – CONNECTION
ROOSTER
15
COVERING DIMENSIONS
Length: 360 mmWidth: 210 mm
360
210
36
0
210
CORRECT ROOF BATTENING –MEDITERAN / MEDITERAN ANTIK
TEMPLATE FOR BATTEN DISTANCE(always two same pieces are made)
BATTEN FOR RIDGE TILE
FIRST BATTEN
DEFINING DISTANCE BETWEEN BATTENS ACCORDING TO NORM- take 12 pieces of roof tile from construction site as sample.- line them up on straight surface (concrete or board) facedown.- measure the distance of 10 roof tiles in extended condition (L1) and
then measure distance in compressed condition (L2).
Recommended batten distance (mm) L = 360
Recommended distance of fi rst batten (mm) Lx = 320
Extended
L= (mm)L1 + L2
20
Compressed
L1 Extended (10 pcs)
L2 Compressed (10 pcs)
Roof slope “α” 20˚ 30˚ 40˚
Position of fi rst batten “s” 50 mm 40 mm 50 mm
Position of batten for ridge tile “h” 135 mm 130 mm 115 mm
DIRECTION OF ROOF TILE ARRANGING
16
HOLLOW TILE
HRN EN 1304:2005
HRN EN 1304:2005
FINAL PLATE FOR RIDGE TILE
FINAL PLATE FOR HOLLOW TILEFRONT PLATE FOR HOLLOW TILE
FRONT PLATE FOR RIDGE TILE
RIDGE TILE
GLINEX RIDGE TILE
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) App 3.20
Roof tile consumption per m2 of roof (pcs) App 3
Covering dimensions (mm) App 340x200
Packing - 4 rows (pcs/pallet) 180
Pallet dimensions (mm) App 1180x850
Packing weight (kg) App 600
Nail hole Yes
Riveting nail (mm) App 4x50
Average roof tile weight (kg) 3.50
Roof tile consumption per m2 of roof (pcs) 2.5
Covering dimensions (mm) App 405x235
Packing - 4 rows (pcs/pallet) 108
Pallet dimensions (mm) App 1020x850
Packing weight (kg) App 420
Natur
Red
Black lux
Brown lux
17
SPECIAL ROOF TILES CEZAR OKTAVIJAN DIOKLECIJAN GLINEX GLINEX PREMIUM MEDITERAN
Ventilation tile • • • • • •
Snowfence • • • •
Half of tile • • •
End tile right 1/1 • • • •
End tile right ½ •
End tile left 1/1 • • • •
End tile left ½ •
Ridge tile • • • • • •
Front plate of ridge tile • • • • • •
End plate of ridge tile • • • • • •
Beginning of ridge • • •
Ridge distributor • • •
Ridge tile under • • •
Ridge tile under –right • •
Ridge tile under-left • •
Range hood-connection • • • • •
Rooster from Vinkovci • • • • • •
ROOF EQUIPMENT CEZAR OKTAVIJAN DIOKLECIJAN GLINEX GLINEX PREMIUM MEDITERAN
Roof foil Compact 140 • • • • • •
Diffuse adhesive tape • • • • • •
Holder of ridge/hip batten • • • • • •
Ridge tile clutch • • • • • •
Ridge/hip tape • • • • • •
Eave grid • • • • • •
Perforated tape for ventilation • • • • • •
Metal snowfence • • • • •
Clutch for fi rst row of roof tile • • • • • •
Clutch against storm • • • • • •
Final perforated plate for ridge tile • • • • • •
Cold engobe • • •
18
NEXE ROOF PLUS
Nexe roof plus is roof equipment that enables natural air fl ow under roof tile and thus makes the roof breath. Complete roof equipment provides permanent protection, correct functioning and long durability. Roofi ng with Nexe roof tile and original roof equipment Nexe roof plus provides extended guarantee of 30 +10 years.
ROOF FOIL – COMPACT 140 PERFORATED VENTILATION TAPE
RIDGE / HIP BATTEN HOLDER
RIDGE TILE CLUTCH
CLUTCH AGAINST STORM
RIDGE / HIP TAPE
METAL SNOWFENCE
DIFFUSE ADHESIVE TAPE
PERFORATED END PLATE FOR RIDGE TILE
COLD ENGOBE
19Nexe jamstveni list crijep.indd 1 9/23/14 8:43:56 AM
G UA R A N T E EYEARS
For roof tile
Purchased on
To be installed on
Številka raèuna
Buyer
(company’s name, seat and seal)
(adress)
(name and surname)
at
30+10 YEARS GUARANTEE
1. DILJ d.o.o. VINKOVCI guarantees that the delivered roof tile will in above period (30 years) meet requirements according to European norm EN 1304:2005. for clay roof tiles
2. If roof tile does not meet roofing requirements within guarantee period due to weather conditions, DILJ d.o.o. VINKOVCI oundertakes to replace them with new ones if it can be proved that claimed roof tile does not meet requirements of Croatian norms. In that case DILJ d.o.o. VINKOVCI under-takes to pay all costs regarding exchange of claimed roof tile and has the right to arrange and imple-ment exchanging works.
3. This guarantee shall not apply to mechanical damages occured due to force majeure (e.g. natural disaster).
4. This guarantee is valid only when following conditions have been met:- roofing work has been carried out by professionals in line with professional rules and producer’s
instructions- roof airing has been carried out according to producer’s instructions- according to instructions in a brochure for each type of roof tile that make an integral part of this
guarantee- claim has been received by the producer in written including date of purchase, type of roof tile,
place of installation, type and scope of damage and enclosed copy of invoice and guarantee- producer’s representative must be enabled by the claimant to inspect the claimed goods undis-
turbed5. Guarantee 30 + 10 years is valid only when following conditions have been met:
- all requirements under Points 1,2,3 and 4- roof has been constructed according to ventilation roof with original roofing equipment NEXE
ROOF PLUS- special roof tiles have been used on roof
6. Guarantee period will commence from the day of roof tile delivery.
DILJ d.o.o. VinkovciCiglarska 33,32100 Vinkovci, CroatiaPhone: +385 (0)32 337 166Fax: +385 (0)32 337 179e-mail: dilj@nexe.hrwww.nexe.hr
GUARANTEE
CONTACT:
Dilj industrija građevinskog materijala d.o.o. VinkovciCiglarska 33, 32100 Vinkovci, Republic of Croatiatel: +385 (0)32 337 162, 337 150fax: +385 (0)32 303 018e-mail: dilj@nexe.hr, www.nexe.hr
Prin
ts: 5
000
pcs
; Dec
emb
er 2
014.
WE BUILD TRUST
top related