water treatment and purification - lenntech · tp150-70/4 + 132sb 5.5 kw 3*400 v, 50 hz eta cos phi...
Post on 17-Jul-2020
1 Views
Preview:
TRANSCRIPT
GRUNDFOS DATA BOOKLET
TP 150-70/4-A-F-A-BQQE 400D 50HZ Grundfos pump 98908308
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/TP000/98908308/TP-150-70-4-A-F-A-BQQE.html
info@lenntech.comtel. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 TP 150-70/4 A-F-A-BQQE
Product No.: On request
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Stub shaft4: Pump head/motor stool5: Wear rings
The pump housing is provided with a replaceable brass neck ring to reduce the amount of liquid runningfrom the outlet side of the impeller to the inlet side. The impeller is secured to the shaft with a nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
1/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionA circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.The pump shaft is fastened directly on the motor shaft with key and set screws.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with free-hole flange (FF).Motor-mounting designation in accordance with IEC 60034-7: IM B 5, IM V 1 (Code I) / IM 3001, IM3011 (Code II).
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 220 m³/hRated head: 6.3 mActual impeller diameter: 172-150 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Cast ironEN-JL1030ASTM A48-30 B
Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 150Pump inlet: DN 150Pump outlet: DN 150Pressure rating: PN 16(@): 800 mmFlange size for motor: FF265
Electrical data:
2/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionMotor type: 132SBIE Efficiency class: IE3Rated power - P2: 5.5 kWPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 11,0-11,0/6,35-6,35 AStarting current: 700-760 %Cos phi - power factor: 0.86-0.80Rated speed: 1460 rpmEfficiency: IE3 89,6%Motor efficiency at full load: 89.6 %Motor efficiency at 3/4 load: 90.3 %Motor efficiency at 1/2 load: 90.4 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.7ErP status: EuP Standalone/Prod.Net weight: 228 kgGross weight: 266 kgShipping volume: 2.29 m³Danish VVS No.: 381718070
3/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 150-70/4 A-F-A-BQQE 50 HzH
[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
Q [m³/h]0 20 40 60 80 100 120 140 160 180 200 220 240 260
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 150-70/4, 3*400 V, 50Hz
P[kW]
0
1
2
3
4
5
6
7
NPSH[m]
0
2
4
6
8
10
12
14
P1
P2
4/11
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
Q [m³/h]0 50 100 150 200
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 150-70/4, 3*400 V, 50Hz
P[kW]
0
1
2
3
4
5
6
NPSH[m]
0
2
4
6
8
10
12P1
P2
150
159
159
295 240
800
250
912
260
300
283
Rp 1/4
220
120
120
220 185 x
270
215
L3L2L1
+T +T+T
TO AMPLIFIERRELAY
IEC
TP2
11 T
HER
MAL
LY P
RO
TEC
TED
WH
EN T
HE
THER
MIS
TOR
S AR
EC
ON
NEC
TED
TO
AM
PLIF
IER
REL
AY F
OR
CO
NTR
OL
OF
MAI
N S
UPP
LYTH
ERM
ISTO
RS
PTC
AC
CO
RD
ING
TO
DIN
440
82
TO AMPLIFIERRELAY
+T +T+T
L1 L2 L3
Description ValueGeneral information:Product name: TP 150-70/4 A-F-A-BQQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 220 m³/hRated head: 6.3 mHead max: 70 dmActual impeller diameter: 172-150 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Cast ironEN-JL1030ASTM A48-30 B
Material code: AInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 150Pump inlet: DN 150Pump outlet: DN 150Pressure rating: PN 16(@) 800 mmFlange size for motor: FF265Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 132SBIE Efficiency class: IE3Rated power - P2: 5.5 kWPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 11,0-11,0/6,35-6,35 AStarting current: 700-760 %Cos phi - power factor: 0.86-0.80Rated speed: 1460 rpmEfficiency: IE3 89,6%Motor efficiency at full load: 89.6 %Motor efficiency at 3/4 load: 90.3 %Motor efficiency at 1/2 load: 90.4 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTCMotor No: 87370261Others:Minimum efficiency index, MEI ≥: 0.7ErP status: EuP Standalone/Prod.Net weight: 228 kgGross weight: 266 kgShipping volume: 2.29 m³Danish VVS No.: 381718070
150
159
159
295240
800
260
300
Rp 1/4
220220185 x
5/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 150-70/4 A-F-A-BQQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
I[A]
0
4
8
12
16
TP150-70/4 + 132SB 5.5 kW 3*400 V, 50 Hz
etacos phi
I
n[rpm]
1200
1300
1400
1500
1600
P1[kW]
0
2
4
6
8
n
P1
6/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 150-70/4 A-F-A-BQQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
150
159
159
295 240
800
250
912
260
300
283
Rp 1/4
220
120
120
220 185 x
270
215
7/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
8/11
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
9/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
10/11
Printed from Grundfos Product Centre [2018.06.003]
Parts list TP 150-70/4, Product No. On requestValid from 1.1.2011 (1152)
Pos Description Annotation Données de classification Référence Quantité Unité- Nut 1 pcs
66 Washer Designation: DIN 125 A2 1Internal diameter: 19Outer diameter: 34Thickness: 3
66a Spring lock washer 167 Nut Thread: M18 1
- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 277a Pan head screw 4
- Plug 1 pcs19 Plug 120 Plug 1
- Cover cpl. 1 pcs77 Cover 1
- Pump housing cpl. 1 pcs6 Pump housing 166a Nut Thread: M10 8
- Shaft seal cpl. 1 pcs72.a O-ring Diameter: 221,84 1
Material type: EPDMThickness: 3,53
105 Shaft seal 1- Stub shaft 1 pcs
9 Socket set screw Length (mm): 6 2Thread: M8
11 Parallel key 151 Pump shaft 117 Air vent screw 1 pcs19 Plug 2 pcs49 Impeller 1 pcs105b Spacer 1 pcs
+ 310 Motor 1 pcs
11/11
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.comhttps://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289
top related