vicon rau x-sem product information 2014. vicon x-sem s-tine harrow for seedbed preparation
Post on 18-Dec-2015
239 Views
Preview:
TRANSCRIPT
• Seedbed preparation
• Strong frame and headstock
• Tines
• Quick tines change
• Depth control
• Side deflectors
• Drill Hitch/PTO transfer shaft
• Track eradicators
• Track marker arm holders
• Large rollers range
• Technical data
• Main arguments
X-SEM – Content
X-SEM – Strong frame and headstock
• Strong power harrow headstock able to carry heavy drills with high hopper capacity like Airsem XT and other drills like ,FT1 coulter bar, Muticorn, Mecasem
• Compact frame for a good integration of heavy drills with lower lifting capacity required
• 3 point linkage Cat II and Cat III
• Strong 45x10 mm straight tine for all conditions (light to heavy)
• 2 rows of tines : the distance between the 2 rows is 200 mm
• 3 rows of tines : the distance between the first and the second row is 336 mm for a good material flow
• The average tine spacing is 150 mm (more details in technical data)
• Working depth up to 15 cm
X-SEM – 2 or 3 rows of tines
336 mm200 mm
2 different types of tine are available depending of soil conditions
X-SEM – 2 Types of tines
• Strong 45x10 mm straight tine for all conditions (light to heavy)
• Levelling tines 45x10 mm for high working speed, shallow work and low cost soil preparation
• 3 rows of tines : the 1rst row is bolted in front of the frame. It is easy to add this additional row when the machine is equipped with 2 rows
• The tine supports are bolted to avoid any weaknesses on the main frame
X-SEM – 2 or 3 rows of tines
• Good access for changing tine tips : the tines are fitted on a tine support that can be easily removed in few minutes for safe maintenance operations
Vicon exclusivity – Tine quick change
• The tine support is only bolted by 2 bolts on one side. A cone and an anti-rotation stop are blocking the tines support in the middle
• For changing tips, the laterals deflectors must be removed (2 pins)
Vicon exclusivity – Tine quick change
• Remove the lateral tine
• Remove the 2 bolts of the tines support
• Take away the tines support
Vicon exclusivity – Tine quick change
• Safe and good access to all maintenance operations : Tips can be changed on the workbench. It is not necessary to go underneath the machine
(dangerous and uncomfortable) Easy access to the worn nut of the tips with a grinder (on the workbench).
• The customer can have a another set of tines in order to save maintenance time during the seeding season
• Roller is doing the depth control
• 2 different possibilities depending of the seeding coulter bars
X-SEM – Depth control
Standard roller arms for combination with
precision seeders, mechanical drill carried by
hydraulic lift or mounted drill without coulter
bar connection onto the roller frame
Parallelogram for a fix coulter bar position whatever the depth is.
X-SEM – Side deflectors
• Mounted on a parallelogram to follow
ground curves
• Long deflector plate for a good soil
guidance and in order to avoid ridges
• The parallelogram is made with high
quality steel to allow flexibility with stones
• The deflectors are hold by 2 pin and
can be removed in few second to get
access to the tines
X-SEM – Airsem hitch
• Same “A” triangle as power harrows which
is adapted to X-SEM frame in order to fit all
Vicon drills (with long parallelogram)
X-SEM – PTO transfert shaft
•The intermediate transfer shaft is available
as an option
•This kit includes the tractor PTO shaft, the
transfer shaft and supports
X-SEM – Hydrolift
• The X-SEM receives the Hydrolift
from the power harrow
• Lifting capacity is 1,6 tonnes
• It can carry high capacity drills
X-SEM – Track eradicators
Track eradicaors sq.22 with standard share 40x8
• Track-eradicators are fitted on the main frame
• With 3 rows of tines, they are fitted in lieu of the tine located at that place on the first row
X-SEM – Track markers arm holders
Track marker arms can be fitted on the X-SEM frame with the track marker holders for:
- Better track marker stability,
- Less strain on the coulter bar
- Lower required lifting capacity
X-SEM – Large roller offer
• Cage roller 550 mm (not compatible with I-Drill) – 10 bars
• Packer roller 500 mm & 585 mm
• Flexipacker roller 585 mm
• Discpacker roller 565 mm.
X-SEM – Heavy Discpacker roller
Discpacker roller ø560mm
• The knives are cutting bigger clods coming in the disc spacing of 12,5cm leaving a ready seedbed
• Knives pressure can be adjustable as high as the disc pressure to the ground to make equal pressure through the working width, and can also be put in a non working position to leave a rough ground surface.
• Heat treated discs for better resistance.• Skid and knives between discs cleaning even in wet and sticky conditions (option)• Shaft diameter: 50 mm
X-SEM – Technical dataWorking width (m) 3.00 3.50 4.00
Maximum HP 180 200 220
2 rowsTine spacing with 2 rows 162 155 163
Number of tines 18 22 24
3 rowsTine spacing with 3 rows 145 155 150
Number of tines 20 22 26
FrameFront box section 100 x 60 x 6 mm
Rear box section 120 x 80 x 8 mm
Weight (kg) for X-SEM 3 rows
Packer roller ø 500 mm 961 1054 1159
Packer roller ø 585 mm 1088 1197 1319
Cage roller ø 550 mm 810 882 963
Flexipacker roller ø 585 mm 1191 1316 1453
Discpacker roller ø 560 mm with knives 1186 1321 1533
Type of tines Straight tine 45 x 10 mm or levelling tine 45x10
Roller attachment Standard arms or parallelogram
Accessories Accord triangle, Hydrolift, track-eradicators, PTO transfer shaft, track marker holders
Seed drill combination possible FT-1, Airsem, Airsem XT, Airsem L, Mecasem, Multicorn
• 2 or 3 row of tines
• 3.00 to 4,00 m rigid
• Quick tines change support for easy and safe maintenance
• Combination with allVicon drills
• Perfectly adapted for operation in light to medium soil.
• Can match with all heavy rollers in Vicon range
• With little wear and high output performance, the X-SEM is a real alternative
X-SEM – Main Arguments
top related