user reference guide - janome...pro-stitcher reference guide |7 grid: select to hide or show the...

User Reference Guide

Pro-StitcherReferenceGuide|1

Table of Contents Getting Started With Pro-Stitcher .......................................................................... 3

Overview ........................................................................................................ 4 The Pro-Stitcher Workspace ............................................................................. 5

Measure ..................................................................................................... 10 Commonly Used Functions ............................................................................... 12

File tab ............................................................................................................... 15 Working With Design Files ............................................................................... 17 Open, Close, and Save Design Files .................................................................. 19 Open, Close, and Save Workspace Files ............................................................ 23 Open, Close, and Save Area Files ...................................................................... 25 To Shutdown, Reboot, or Exit Pro-Stitcher ........................................................ 26

Edit Tab ............................................................................................................. 27 Design History ................................................................................................. 28 To Undo Your Most Recent Change .................................................................. 30 To Cut, Copy, Paste, or Duplicate a Design ........................................................ 31 To Clear All Objects from the Workspace .......................................................... 32 Design Groups ................................................................................................ 33

Area Tab ............................................................................................................ 35 Create and Use Areas ...................................................................................... 36 To Create a Two-Corner Area ........................................................................... 38 To Create a Multi-Point Area ............................................................................ 41 Rotating Areas ................................................................................................ 43

Modify Tab ......................................................................................................... 45 Baselining Design Modifications ........................................................................ 46 Rotating Designs ............................................................................................. 47 Cropping Designs ............................................................................................ 57 Resizing Designs ............................................................................................. 64 Skewing Designs to an Area ............................................................................. 73 Aligning Designs .............................................................................................. 77 Repositioning Designs ...................................................................................... 85 Swapping Design Start and End Points .............................................................. 89

Repeat Tab ......................................................................................................... 91 Basic Repeat ................................................................................................... 92 Wrapping Designs ........................................................................................... 99

Pro-Stitcher Tab .................................................................................................. 105 Quilting the design .......................................................................................... 107 Before Stitching ............................................................................................... 110 Move the Quilting Machine with Pro-Stitcher ...................................................... 111 Channel Lock .................................................................................................. 113 Freehand Record ............................................................................................. 114 Changing the Stitching Start or End Point .......................................................... 116

2|www.Janome.com

View Tab ............................................................................................................ 118 Tools Tab ........................................................................................................... 120 Settings Tab ....................................................................................................... 125

Touch Mode .................................................................................................... 127 To Customize the Quick-Access Toolbar ............................................................ 128 Pro-Stitcher Defaults ........................................................................................ 129 Auto Jump ...................................................................................................... 131 Stitching Speed ............................................................................................... 132 Stitches Per Inch ............................................................................................. 133 Tie-off Stitches ................................................................................................ 134 Pull-up Stitches ............................................................................................... 136 Pause Delay .................................................................................................... 137 Advanced Settings ........................................................................................... 138

Simulation Mode .......................................................................................... 139 Communications .......................................................................................... 142 Speed Profile ............................................................................................... 144 Logging ...................................................................................................... 145 Motors ........................................................................................................ 146

GettingStartedWithPro-Stitcher® OnlineVideosandTutorialsWeencourageyoutolearnmoreaboutPro-StitcherbywatchingtheonlinevideosfeaturingtheJanomestudioeducators.Youcanalsofindtutorialsforaccomplishingcommonquiltingactivities.

ContentofthisManualTheinformationcontainedinthisdocumentissubjecttochangewithoutnotice.Ifyoufindanyproblemsinthemanual,pleasereportthemtousinwriting.Thisdocumentisnotwarrantedtobeerror-free.Janomeassumesnoresponsibilityorliabilityforanyerrorsorinaccuraciesthatmayappearintheinformationalcontentcontainedinthismanual.

4|www.Janome.com

OverviewPro-Stitcherrunsonatouch-screentabletcomputerwithMicrosoft®Windowsoperatingsystem.BecausePro-StitcherrunsinaWindowsenvironment,youmaynoticethingssuchastheWindowsdesktop.Ifyou’reunfamiliarwiththeWindowsoperatingsystemorcomputersingeneral,you’llbenefitbytakingaclassorfindingotherwaystolearnmoreaboutthebasicsofMicrosoftWindows. TomaintaintheintegrityofthePro-Stitchersoftware,avoidusingthePro-StitchertabletcomputerexceptwhenrunningPro-Stitcher.Forexample,ifthecomputerisconnectedtotheInternet,WindowsmayperformoperatingsystemupdatesthatcouldpotentiallybeincompatiblewithPro-Stitcher.Italsomayexposethecomputertovirusesandothermalwarethatmaycompromisethesystemorleadtootherproblemsthatmaynotbecoveredbythewarranty.TogetthemostfromusingPro-Stitcher,usethePro-StitchercomputeronlyasdirectedtorunthePro-Stitchersoftware,theArt&Stitchsoftware,andothersoftwareprovided.Notes,ImportantNotes,andCautions

• NOTE:ANOTEindicatesimportantinformationthathelpsyoumakebetteruseofyourPro-Stitcher.

• IMPORTANT: AnIMPORTANTnoteprovidesinformationthatisessentialtoproperlyusingPro-Stitcher.

• CAUTION:ACAUTIONindicatesapotentialforcausingharmtoyourquiltingmachine,thequilt,ortoyourself.

ThePro-StitcherWorkspaceThePro-Stitcherscreenprovidesquickaccesstoallfunctions.

WorkspaceTabsFileTab:UsetheFileTabtoworkwithdigitaldesignfiles,Pro-Stitcherprojects,andareas.GotothistabtoshutdownPro-Stitcher.EditTab:UsetheEditTabtocut,copy,paste,duplicate,orcleardesignsontheworkspace. AreaTab:UsetheAreaTabtocreateanduseareas.ModifyTab:UsetheModifyTabtomakeformattingchangestothequiltingdesign(s):rotate,reposition,resize,crop,align,skew,orswapstartandendpoints.RepeatTab:UsetheRepeatTabtorepeat,wrap,offset,andconnectdesigns.Pro-StitcherTab:UsethePro-StitcherTabtostitchoutthequiltandaccessotherstitchingoptions.ViewTab:UsetheViewTabtoturnonoroffelementsontheWorkspace,suchastherulerandscrollbars.ToolsTab:UsetheToolsTabtoaccessArt&Stitch.SettingsTab:UsetheSettingsTabtosetupdefaultsandaccessadvancedoptionsfortroubleshootingandfinetuningPro-Stitcherperformance(usuallyasdirectedbyatechnician).HelpTab:UsetheHelpTabtoaccessthisindexedreferencehelpsystemandseetheAboutbox.

6|www.Janome.com

RibbonBarTheRibbonappearsbelowtheWorkspacetabs.Itdisplaysbuttonsthatchangeaccordingtowhichtabyouhaveselected.SeethehelppagesforeachWorkspaceTab(detailedabove)forinformationabouttheRibbonBarbuttonsuniquetoeachtab.SidebarAsyouselectRibbonbuttonsforthedifferentWorkspaceTabs,optionsforthebuttonmayappearintheSidebaralongtherightsideofthescreen.TheSidebaralsohasitsowntabs,dependingonwhatisloadedintotheworkspace.Forexample,ifadesignorgroupofdesignsisintheworkspace,therewillbeatabforDesignorGroup.Quick-AccessToolbarTheQuick-AccessToolbarisacustomizabletoolbar.Includebuttonstoaccessyourmost-usedfunctionswithinPro-Stitcher.ThistablesummarizesthedefaultbuttonsontheQuick-AccessToolbar.IfyouwouldlikedifferentbuttonsontheQuick-AccessToolbar,seeToCustomizetheQuick-AccessToolbar.

Undo:UsetheUndobuttontoundothelastfunctionperformed.ContinueselectingUndoasneededtogetthedesignbacktowhereyouwantit.

Redo:IfyouchangeyourmindaboutthelastUndoaction,selecttheRedobutton.

Baseline:UsetheBaselinebuttonto"freeze"themodificationsyouhavemadetothedesign. Allmodificationsafteryoubaselinetreatthedesignasanew,unaltereddesign.However,baselinedoesnotsavethedesigntoyourcomputer.

Rulers:Selecttohideorshowtheworkspacetopandsiderulers.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonorofftherulers.

Follow:SelectFollowwhenyouwanttoensurethatthecrosshairsremaininviewwhenyouhavezoomedadesign.ThissavesyoufromhavingtousePantofindthecrosshairs.Itisalsohelpfultoenablewhenyoustitchawidedesignbecauseyoucanbothzoominonthedesignandseewhatisbeingstitchedonthescreen.

Drag:SelecttheDragbuttonandthenusethemachinetomovetheneedle(representedbythecrosshairs)tothedesiredlocation.TheDragbuttonbecomesaDropbutton.Whenthemachineisinposition,touchtheDropbutton.

Grid:Selecttohideorshowtheworkspacegrid.

Measure:UseMeasuretomeasuredistancesinadesignordirectlyonthequilt.FormoreinformationseetheMeasurehelptopic.

HorizontalChannelLock:SelectHorizontaltolockPro-Stitchersoitstitchesonlyinahorizontaldirection.PresstheStart/Stopbuttononthemachine’shandlebarsandmovethemachinetostitchthelineinaleft-to-rightorright-to-leftdirection.

VerticalChannelLock:SelectVerticaltolockPro-Stitchersoitstitchesonlyinaverticaldirection.PresstheStop/Startbuttonthemachine’shandlebarsandmovethemachinetostitchthelineinatop-to-bottomorbottom-to-topdirection.

WorkspaceToolbarTheWorkspaceToolbarisalwaysvisibleandprovideseasyaccesstotoolsyou'lluseforinteractingwithobjects,suchasdigitaldesignsandareas,onthePro-StitcherWorkspace.

Pan:UsePantomovewhatyouseeontheworkspace.Pandoesnotrepositionthedesignrelativetothequilt.

• SelectPanandthendragyourfingeracrossthescreen.Thecurrentviewmoveswiththemovementofyourfinger.

Zoom:UseZoomtoviewasectionofthedesignlargerorsmaller.Zoomdoesnotrepositionorresizethedesign.Ifyouhavegridlinesdisplayedon-screen,you’llseethegridlinesalsoshrinkorgrowasyouzoomthedesign.

• Tozoomintoanarea,selectZoom.Thenuseyourfingertodrawaboxaroundtheareayou'dliketoseelarger.SeealsotheZoomInandZoomOutbuttonsbelowintheStatusBar.

Select:TouchtheSelectbuttonintheWorkspacetoolbar,thentouchadesigntoselectit.Amessagescrollsontherightsideofthescreentoindicatethatthedesignisselected.Ifitwasalreadyselected,touchingthedesigndeselectsit.Aselecteddesignappearsdarkeronthescreenthananyunselecteddesigns.YoucanalsouseyourfingertodrawamarqueeboxonthescreenaftertouchingtheSelectbutton.Anydesignsthatoverlapwiththemarqueeboxwillbeselected.

8|www.Janome.com

XForm(Transform):YoucanusetheTransform(XForm)featuretomanuallyrotateorresizeadesignorarea.SelectthedesignorareaandthenselectXForm.Handleswillformaroundtheobject.Useyourfingeronthehandlestoresize.Useyourfingertodragthedesignaroundtheworkspace.Oruseyourfingerontheroundhandle(abovetheupperrightcorner)torotatethedesign.TouchXFormtoturnoffthehandles.SeealsoToManuallyRotateaDesign.

Simulate:IfyouarerunninginSimulationmode,theSimulatebuttonwillbeintheWorkspaceToolbarsoyoumayquicklyswitchbetweennormaloperationandSimulationmode.

StatusPanelThistablesummarizesthebuttonsintheStatusBar.

SelectAll:Usethisbuttontoselectalldesignsintheworkspace.

MultiSelect:Usethisbuttontoselectdesignsoneatatime.Selectthebuttonandthentouchthedesignsyouwanttoselect.

SelectNone:Usethisbuttontocancelanyselectionsyouhavemade.

ZoomtoDesign:Zoomsthedesigntocompletelyfilltheworkspace.

ZoomtoArea:Zoomstheareatocompletelyfilltheworkspace.

Refresh:Centersthedesign,area,andcrosshairssobotharevisibleonthescreen.Refreshdoesnotrepositionthedesignrelativetothequilt.Torepositionadesign,seeRepositioningDesigns.

Zoomin:Enlargesthedesignonthescreen,butdoesnotchangethesizeofthedesignwhenitisquilted.Tochangethesizeofthedesign,seeResizingDesigns.

Zoomout:Shrinksthedesignonthescreen,butdoesnotchangethesizeofthedesignwhenitisquilted.Tochangethesizeofthedesign,seeResizingDesigns.

TheBoundingBox:Ifyouhaveadesignloaded,theouterdimensionsofthedesignareaissurroundedbyablueboundingbox.Ifyouhavedefinedanarea,theouterdimensionsoftheareaissurroundedbyapinkboundingbox. YoucanturnoffthedesignandareaboundingboxesbyselectingViewTab>Bounds. TheStitchingStartandEndPointsforDesigns:ThepointatwhichthestitchingbeginsisshownbyagreencirclewithanXinit.ThepointatwhichthestitchingendsisshownbyaredcirclewithanXinit.YoucanturnoffthestitchingstartandendpointsbyselectingViewTab>StartEnd.JumpStartandEndPointsforDesigns:Thesmallgreenandredcirclesindicatethestartandendpointsofjumpswithinthedesign.Purpledashedlinesconnectthesmallgreenandredcirclestoshowthejumps,orno-stitch,lines. YoucanturnoffthejumpstartandendpointsbyselectingViewTab>Jumps. Selectedvs.Non-SelectedbuttonsSomebuttonsareon/off,ortoggle,buttons.Turnthemonoroffbytouchingthem. Buttonisselected,oron.

Buttonisdisabled,oroff.

10|www.Janome.com

MeasuringtheDesignorQuiltYoucanusethemachinetomeasuredifferentregionsofthequilt.

1. Movethemachinesothecrosshairs,ortheneedleposition,areatthestartingpoint,orzerocoordinate,ofthesectiontobemeasured.

2. PressMeasureandmovethemachinetobeginmeasuring.Therulergivesyouthedistanceinthehorizontal(x)andthevertical(y)directions,aswellasthedirectangulardistance.Intheexamplebelow,themeasurementwasfromtheupperleftcornertothelowerrightcorner,or5incheswide(X)by5incheshigh(Y),and7.07inchesfromcornertocorner.

3. PressMeasureagaintoturnoffthemeasurement.Toresetthemeasurementstartingpoint,pressMeasuretoturnitoffandthenturnitbackonafteryouhavemovedthecrosshairstowhereyouwanttoagainbeginmeasuring.

MachineQuiltingTip:Tomeasureadimensionlonger thantheavailablequiltingspace

PositionthecrosshairsandpressMeasure.Measureasfaronthequiltasyoucanandmarkwhereyouendedwithapin.Enterthemeasurementintothecalculatoronyourquiltingmachine.PressMeasureagaintoturnitoff.Advancethequilt,makingsurethepinisstillvisible.PressMeasureandmeasurethenextsegment,andusethecalculatortoaddthismeasurement. PressMeasuretoturnitoff.Continueinthismanneruntilyouhavethetotalmeasurementyouneed.

12|www.Janome.com

CommonlyUsedFunctionsToaccessthevariousPro-Stitcherfunctions,youwilltypicallyselectoneofthetabswhichdisplaysaribbonofbuttonsbelowthetabs.Whenyouselectaribbonbutton,customizationoptionsforthatfunctiondisplayintheSidebaralongtherightsideofthescreen.(IftheSidebarisclosed,choosethearrowbuttonattheupper-rightcornerbythePro-Stitcherworkspacetoopenit.)

ToDoThis SelectThis ThenDoThis

Displaycontext-sensitiveon-screenhelp

?icon Selectatab,button,orareaontheworkspacetodisplayatextboxwithinformationaboutthatfunction.

Open,close,savedesigns,areas,orprojects

Filetab ChooseDesign> Open,Close>Selected,orSave>SelectedfromtheRibbon.

ShutdownPro-Stitcher Filetab ChooseShutDown>ShutdownfromtheRibbon.

Showorhidethedesign,theboundingbox,theareabox,therubberband,thejumppoints,startandstoppoints,thegridlines,thescrollbars,ortherulers

Viewtab ChoosetheitemsfromtheRibbonthatyouwanttodisplayornot.

Duplicateorclearadesign Edittab ChooseDuplicateorClearAllfromtheRibbon.

Baselinethedesignmodifications

Modifytab ChooseBaselinefromtheRibbon;youcanalsoassigntheBaselinebuttontotheQuickAccessToolbar.

Rotate,flip,ormirrorasingleorgroupeddesign

Modifytab ChooseRotate;chooseeitherGrouporSingleontheSidebar;thenchoosefromtherotateoptions.

Cropthedesignrelativetoanarea

Modifytab Createthearea.ChooseCropfromtheRibbon,chooseOutsideorInsideontheSidebar.Thenindicatewhethertoperformatieoffatthejumppoints(disabletheEdgesbutton)ortostitchbetweenjumppoints(enabletheEdgesbutton).

Changethequiltingstartand/orendpointsofthedesign

Modifytab Movethedesign’sstartand/orendpoints:selectPro-StitcherTab>NewStart/End).Usetheverticalscrollbarsinthesidebartochangethestartand/orendpoints.Youcanalsocropthedesignbasedonthenewpositionsofthestartand/orendpoints.

Changethedimensionsofthedesign

Modifytab ChooseResizefromtheRibbon.ChooseLocktolocktheaspectratioifdesired.ChooseeitherWidth,Height,OriginalWidth,orOriginalHeightontheSidebar;thenenteranumberintotheboxorusethePlus(+)andMinus(—)toadjustthedimension.

Skewthedesign Modifytab Createanareaandopenadesign.ChooseSkewfromtheRibbon.GenerallyyouwilluseSkew1whenskewingtoaconvexareaandSkew2whenskewingtoaconcavearea.

14|www.Janome.com

Swapthequiltingstartandendpoints

Modifytab SelecttheSwapbutton.

Repeatdesignsintheworkspace Repeattab AddorremovedesignrepeatsusingthePlus(+)andMinus(—)buttons,orselecttheFitbuttontohavePro-Stitcherautomaticallycalculatetheoptimalnumberofrepeatsbothhorizontallyandvertically.Addmorehorizontalorverticalrepeatsifdesired,andthenstretchthemverticallyandhorizontallytofitthemtothearea.

Wraprepeateddesignsintheworkspace

Repeattab Shifttheentiredesignwindowupordown,oroffsettheindividualrows.

Stitchperfectlystraightlinesacrossthequilt.

Pro-Stitchertab UseChannelLocktostitchhorizontallyorvertically,oruseMove withtheStitchbuttonselectedtostitchup,down,left,right,ordiagonally.

Quiltoutadesign Pro-Stitchertab SelectQuiltfromtheRibbon.(MakesuretheStitchbuttonisselectedinthesidebar.)ThenselectRun.

Recoverfromathreadbreakorrunningoutofbobbinthread

Pro-Stitchertab UseNewStart&EndtochangethestartpointofthedesigntothepositionwherePro-Stitcherneedstoresumestitching.

ToupdatethePro-Stitchersoftware

Filetab DownloadthelatestversionofthePro-StitchersoftwaretoaUSBDrive.PlugtheUSBdriveintoaUSBportonthePro-Stitchertabletcomputer.SelecttheUpdatebuttonontheribbon.

FileTabUsethefiletabtoaccessdigitaldesignfiles,Pro-Stitcherprojects,andsavedareas.UsethismenuforshuttingdownPro-Stitcher. Filetabribbonbuttons

Design:Opensadesignfile.Navigatethroughyourcomputer’sfilesystemtolocatethedesignfileyouwanttouse.Thedrop-downmenualsoshowsthedesignfilesyoumostrecentlyusedforquickaccess.

Workspace:Opensaworkspacefile.Navigatethroughyourcomputer’sfilesystemtolocatetheworkspacefileyouwanttouse.Thedrop-downmenualsoshowstheworkspacefilesyoumostrecentlyusedforquickaccess.

Area:Selecttoopenanareafile.Navigatethroughyourcomputer’sfilesystemtolocatetheareafileyouwanttouse.Thedrop-downmenualsoshowstheareafilesyoumostrecentlyusedforquickaccess.Youcanhaveonlyoneareaopenatatime.

Save:Selecttosavetheselecteddesign(s),theworkspace,orthearea.

Close:Selecttoclosetheselecteddesign(s),theworkspace,orthearea.Youwillbepromptedtosaveanyobjectsthathavehadchanges.

ClearAll:Selecttocloseeverythingintheworkspace.Besuretosaveanythingyouwanttokeepbeforeclearing.

Update:AfterdownloadingtheupdatetoaUSBdrive,insertthedriveintothePro-StitchercomputerandselectthisbuttontoupdatethePro-Stitchersoftware.

ShutDown:SelecttoexitPro-Stitcher.Fromthemenu,selectShutDowntoquitthesoftwareandshutdownthetabletcomputer;selectReboottorestartboththetabletcomputerandsoftware;orselectExittoWindowstoexitthesoftwarebutleavethetabletcomputeron.

16|www.Janome.com

ToWorkWithDesignFilesToOpen,Close,orSaveDesignFilesToOpen,Close,orSaveProjectFilesToOpen,Close,orSaveAreaFilesToShutdown,Reboot,orExitPro-Stitcher FiletypescompatiblewithPro-StitcherDesignfiles .hqf,.hqfx ThisisthestandardPro-Stitcherfiletype.(Thexindicatesthatthefileisencrypted.) .hqv,.hqvx ThisisusedforPro-Stitchervectorfiles.(Thexindicatesthatthefileisencrypted.).qli,.qlix Analternativedesignfiletype.(Thexindicatesthatthefileisencrypted.).txt,.txtx Analternativedesignfiletype.(Thexindicatesthatthefileisencrypted.).tap,.tapx Analternativedesignfiletype.(Thexindicatesthatthefileisencrypted.)

• NOTE:Whenyoupurchasedigitaldesigns,werecommendyouget.hqfor.hqvfilesifavailable.

Projectfiles .hqp Pro-StitcherusesthisfileextensionwhenyousaveaPro-Stitcherprojectfile.

.hqpx Pro-Stitcherusesthisfileextensionifyousaveaprojectfilethatincludesanencryptedfile.

Areafiles .hqa Pro-Stitcherusesthisfileextensionwhenyousaveanareafile.

WorkingWithDesignFiles

Pro-Stitcherreadsseveraldesignfiletypes:.hqf,.hqv(vectorfileformat),.hqp,.qli,.txt,and.tap.Pro-Stitchercanalsoread.hqfx,.hqvx,.qlix,.txtx,and.tapxencryptedfiles,providedyouuseakeycodethatisuniquetoyourPro-Stitchercomputer.Youwillneedthiscodewhenyoupurchaseencrypteddesigns.

Tofindthekeycodeforencryptedfiles

• SelecttheHelptabintheupperrightcornerofthescreen.Thenselect

Aboutintheribbon.TheAboutboxappearsintheworkspace.ThecodeyouneedisafterthewordKey.Tocopythecodetothecomputer’sclipboard,selecttheCopyKeybuttonontheAboutscreen.Youcanthenpastethecodeintotheencrypteddesign.

DesignFilePropertiesWheneveradesignisopen,aDesigntabappearsintheSidebar.Thedesign'sdimensionsappearintheDesignSidebartab.YoucanmodifythesepropertiesdirectlyintheDesignSidebarorselectModifyTab>Resize.

SelectingDesignsWhenoneormoredesignsareopenonthescreen,youcanselectdesign(s)andmakemodificationstothem.

18|www.Janome.com

Toselectadesign

Aselecteddesignappearsdarkeronthescreenthananyunselecteddesigns.

Select:TouchtheSelectbuttonintheWorkspacetoolbar,thentouchadesigntoselectit.Amessagescrollsontherightsideofthescreentoindicatethatthedesignisselected.Ifitwasalreadyselected,touchingthedesigndeselectsit.YoucanalsouseyourfingertodrawamarqueeboxonthescreenaftertouchingtheSelectbutton.Anydesignsthatoverlapwiththemarqueeboxwillbeselected.

Toselectmultipledesigns• TouchtheSelectbuttonintheWorkspacetoolbar.Thenuseyour

fingeronthescreentodrawaboxthatincludesthedesignsyouwanttoselect.Besuretobegindrawingtheboxinablankareaoftheworkspace.Ifyoubegindrawingtheboxonadesign,Pro-Stitcherselectsandmovesthatdesign.Byselectingmultipledesigns,youautomaticallycreateadesigngroup.

Learnmoreaboutdesigngroups.

• YoucanalsousetheselectbuttonsintheStatusPanelatthebottomofthescreentoselectdesigns.

SelectAll:Usethisbuttontoselectalldesignsintheworkspace.

Multi-Select:Usethisbuttontoselectdesignsoneatatime.Selectthebuttonandthentouchthedesignsyouwanttoselect.

SelectNone:Usethisbuttontocancelanyselectionsyouhavemade.

Open,Close,andSaveDesignFiles

Toaccessrecentlyuseddesigns Thisshortcutenablesyoutoopenrecentlyuseddesignswithoutsearchingthroughthedesignlibrary.

• SelectFile>Design.Thenselectoneofyourrecentlyuseddesignsthatarelistedonthemenu.Iftherearemorerecentdesignsthatshowupinthedrop-downbox,useyourfingeronthescrollbarortaptheupordownarrowtoshowmoreofthelist.

20|www.Janome.com

Toloadadesignfromthedesignlibrary

• Toloadadesign,selectFileTab>Design>Open.BrowsetothedesignstoredinafolderoneithertheC:driveoronaUSBdrive.Double-tapthenameofthedesiredfile,orsingletapandthenselectOpentoloadthedesign.

Designers’Showcase

Pro-Stitchercomeswithalargelibraryofquiltingmotifsfromdigitalquiltmotifdesigners.Selectthedesigner’snametoseethemotifs.ThenchoosethedesignyouwanttouseandselectOpen.Ifyousavethedesign,Pro-Stitchersavesittoan.hqffileformat.Ifan.hqffilewiththatnamealreadyexists,youwillbepromptedtooverwritethedesign.

TosaveadesignPro-Stitcherpromptsyoutosaveyourworkwhenclosingthesoftwareorclosingadesign.However,itisagoodideatosaveyourworkregularly.

• PresstheSave>Selectedtosavethedesigninitscurrentstate.Thedesignlibraryappearswiththenameofthecurrentdesignloaded.

Pro-Stitchersavesthedesignasan.hqffile.

• Tooverwritetheexistingdesignwiththatname,pressYes.OtherwiseselectNoorCancel.

• Tosaveacopyofthedesigntoanewname,touchthenamebox.Thepop-upkeyboardappearsforyoutoenteranewname;thenpressSave.

• Tocancelwithoutsavingthedesign,pressCancel.

22|www.Janome.com

Tocloseadesign

• Ifyouhavemorethanonedesignintheworkspace,selectthedesignyouwanttoclose.ThenselectClose>Selected.Youwillbepromptedtosaveanychangesmadetothedesign.

Open,Close,andSaveWorkspaceFilesYoucansaveagroupofdesignsasadesignorasaworkspace.Ifyousaveagroupasadesign,Pro-Stitchersavesitasasingledesign.Whenyouloaditagaininthefuture,youwillnotbeabletoworkindependentlywiththedesigns.Ifyousaveagroupofdesignsasaworkspace,Pro-Stitchersaveseachdesignindependentlysothatwhenyouloadtheworkspaceagain,youwillbeabletomodifythedesignsindividually.Ifyouhavecreatedanarea,Pro-Stitcheralsosavestheareaaspartoftheworkspace. Toopenanexistingworkspacefile

• Toopenanexistingworkspacefile,selectFile>Workspace>Open,navigatetothedesiredfolder,andselecttheworkspacefile(withafileextensionof.hpqor.hqpx).ThenselecttheOpenbutton.

Toclosethecurrentworkspacefile

• Toclosethecurrentworkspacefile,selectFile>Close>Workspace.Iftherehavebeenanychanges,youwillbepromptedtosavethefile.Ifyouwanttosaveit,selectYes;otherwise,selectNo.

Tosaveaworkspaceasadesignfile

• Tosaveagroupofdesignsasasingledesignfile,selectthedesignsandthenselectFile>Save>Selected.Navigatetothefolderwhereyouwanttosaveit,andgiveitanameifnecessary.ThenselecttheSavebutton.

• NOTE:Ifyousavemultipledesignsasadesignratherthanasaworkspace,thedesignsarecombinedintoasingledesign.Anymodificationsmadetothedesignapplytotheentiredesign.

24|www.Janome.com

Tosaveagroupofdesignsasaworkspace• TosaveagroupasaProject,selectthegroup,selectFile>Workspace

>Save,navigatetothefolderwhereyouwanttosaveit,andgivethegroupafilenameifnecessary.ThenselecttheSavebutton.

• NOTE:Ifyousavemultipledesignsasaworkspace,Pro-Stitchersavestheindividualdesigns.Youwillbeabletocontinuetomakemodificationstothedesignsindividually.

Open,Close,andSaveAreaFilesAfteryoucreateanarea,youcansavethatareatoafiletobeabletoreuseitinthefuture.Theareafileissavedtoafilewiththeextension.hqaor.hqax.Formoreinformationaboutcreatingandusingareas,seetheAreaTabchapterinthismanual. Toopenanexistingareafile

• Toopenanexistingareafile,selectFile>Area>Open,navigatetothedesiredfolder,andselecttheareafile(withafileextensionof.hpa).ThenselecttheOpenbutton.

• NOTE:Whenyouopenasavedareafile,theareadisplayswithadottedlineratherthanasolidlinetoindicatethatitisn'tlockedtoanypositiononthequilt.Selectthearea(Area>Select)andthenusetherepositiontools(Modify>Reposition)topositionthearearelativetothemachine'sneedleandcrosshairsonthescreen.

Toclosethecurrentareafile

• Toclosethecurrentareafile, selectFile>Close>Area.Ifyouhavemadechangestothearea,youwillbepromptedtosavethefile.Ifyouwanttosaveit,selectYes;otherwise,selectNo.

Tosavethecurrentareafile

• Tosavethecurrentareaasafile,selectFile>Save>Area.Navigatetothefolderwhereyouwanttosaveit,touchthenameboxandgiveitanameifnecessaryusingtheon-screenkeyboard.ThenselecttheSavebutton.

26|www.Janome.com

ToShutDown,Reboot,orExitPro-StitcherWhenyouarethroughusingPro-Stitcher,youcanclosePro-Stitcherandshutdownthetabletcomputer,restartthePro-Stitchersoftware,orexitPro-StitchertotheWindowsdesktop. ToshutdownPro-Stitcherandthetabletcomputer

• SelectFileTab>Shutdown>ShutDown.Youmaybepromptedtosaveyourwork.ChooseYestosave,orNotoshutdownwithoutsavingyourmostrecentchanges.

TorebootthePro-Stitchertabletandsoftware

• SelectFileTab>Shutdown>Reboot.Youmaybepromptedtosaveyourwork.ChooseYestosave,orNotoshutdownwithoutsavingyourmostrecentchanges.

ToexitPro-StitchertotheWindowsdesktop

• SelectFileTab>Shutdown>ExittoWindows.Youmaybepromptedtosaveyourwork.ChooseYestosave,orNotoshutdownwithoutsavingyourmostrecentchanges.

EditTabEdittabribbonbuttons

History:UsetoshowalistofyourmostrecentactionswithPro-Stitcher.SelectanitemontheHistorylisttoreturnthedesigntothestateitwaswhenthatfunctionwasperformed.OrselectClearHistorytocleartheentiredesignhistory.SeealsoToworkwiththeDesignHistory.

Undo:UsetheUndobuttontoundothelastfunctionperformed.ContinueselectingUndoasneededtogetthedesignbacktowhereyouwantit.SeealsoToUndoYourMostRecentChange.

Redo:IfyouchangeyourmindaboutthelastUndoaction,selecttheRedobutton.

Cut:Cutstheselecteddesign(s).

Copy:Copiestheselecteddesign(s).

Paste:Pastestheselecteddesign(s),positioningthedesignstartpointattheneedleposition(indicatedbythecrosshairs).

Duplicate:Selectthedesign(s)youwanttoduplicateandthenselecttheDuplicatebutton.Ifonedesignisselected,onlythatdesignisduplicated.Ifmultipledesignsareselected,allselecteddesignsareduplicated.SeealsoToDuplicateaWorkspaceObject.

ClearAll:Selecttocleareverythingfromtheworkspace.Besuretosaveanythingyouwanttokeepbeforeclearing.SeealsoToClearAllObjectsfromtheWorkspace.

ToCut,Copy,orPasteaWorkspaceObject

28|www.Janome.com

DesignHistoryPro-Stitchershowsthemostrecentlyusedactionsyouperformed,withthemostrecentactionatthetopofthelist(belowClearHistory).

ToSeeYourDesignHistory

• SelectEditTab>HistorytoshowalistofyourmostrecentactionswithPro-Stitcher.Theitematthetopofthelist(belowClearHistory)isthemostrecentfunctionandtheitematthebottomofthelististhefirstfunctionperformed.Scrollthroughthelistbydraggingtheboxinthescrollbar.SelectanitemontheDesignHistorytoreturnthedesigntothestateitwaswhenthatfunctionwasperformed.

ToCleartheHistoryofRecentActions

• Toclearthehistoryofrecentactions,selectClearHistoryatthetopofthelist.

• NOTE:Clearingthehistorydoesnotundoanyofthoseactions;itsimplyremovestheactionsfromthelistofactions.

Afterclearingthehistory,thehistoryisgoneandyouwillnotbeabletoUndoorRedopreviousactions.Asyouperformnewactions,theyareaddedtothehistoryandtheUndoandRedobuttonswillworkonthoseactions.

30|www.Janome.com

UndoandRedoToUndotheLastFunction(s)

Undo:SelecttheUndobuttontoundothelastfunctionperformed.ContinueselectingUndoasneededtogetthedesignbacktowhereyouwantit.

ToRedotheLastUndoAction(s)

Redo:IfyouchangeyourmindaboutthelastUndoaction,selecttheRedo button.

Cut,Copy,Paste,orDuplicateaDesign

Cut:Selectthedesign(s)youwanttocutandchoosetheCutbutton.Pro-StitcherkeepsthatdesignintheClipboardsoitcanbepasteduntilyoucutorcopyanotherdesign,oruntilyouclosePro-Stitcher.

Copy:Selectthedesign(s)youwanttocopyandchoosetheCopybutton.Pro-StitcherkeepsthatdesignintheClipboardsoitcanbepasteduntilyoucutorcopyanotherdesign,oruntilyouclosePro-Stitcher.

Paste:Choosethisbuttontopastethedesign(s)thatwerecutorcopiedtotheClipboard.Pro-Stitcherpositionsthedesignstartpointattheneedleposition(indicatedbythecrosshairs).

Duplicate:Selectthedesign(s)youwanttoduplicateandthenchoosetheDuplicatebutton.Ifonedesignisselected,onlythatdesignisduplicated.Ifmultipledesignsareselected,allselecteddesignsareduplicated.Theduplicateddesignisplacedsuchthatthedesign'sstartpointisattheneedleposition,indicatedbythecrosshairs.Iftheoriginaldesignwasalreadyatthecrosshairs,you'llneedtoselectthetop(duplicated)anddragittowhereyouwantit.

32|www.Janome.com

ToClearAllObjectsfromtheWorkspace

ClearAll:ChooseClearAlltocloseeverythingintheworkspace.Clearingtheworkspacedoesnotsavetheareaoranydesigns.UsetheSaveoptionifyouwanttosavethembeforeclearing.

DesignGroupsYoucangroupmultipledesignsandtreatthemasasingledesign.

1. Openthedesignsyouwanttouse.Youcanalsoopenonedesignandduplicateitintheworkspace(EditTab>Duplicate).

2. Togroupthedesigns,touchtheSelectbuttonintheWorkspaceToolbaranduseyourfingertodrawamarqueeboxthattouchesthedesignsyouwanttogroup.Thegroupisnowselected.YoucanalsousetheSelectAllorMulti-SelectbuttonsintheStatusPaneltoselectthedesigns.

34|www.Janome.com

• YoucanalsoselecttheMultiSelectbuttonintheSelectsidebarandtoucheachofthedesignsyouwanttogrouptogether.Ifyouwanttogroupallofthedesignsintheworkspace,selecttheSelectAllbutton.

IfyoulookattheWorkspacetabinthesidebar,you'llseethedesignslistedindividually,aswellasagroupthatincludesbothdesigns.Sincethegroupisselected,itishighlightedindarkgreen.

Youcannowworkwiththedesignsasagroup,suchasrotatethegroup,resizeit,orrepositionit.Seealso:Torotate,mirror,orfliprepeateddesignsoradesigngroup

AreaTabCreateandUseAreasAreatabribbonbuttons

File:Usetoopenanareafileyouhavesaved.Navigatethroughyourcomputer’sfilesystemtolocatetheareafileyouwanttouse.Thedrop-downmenualsoshowstheareafilesyoumostrecentlyusedforquickaccess.

Select:thisbuttonselectstheareaintheworkspace.Theareaturnsfromapurplelinetoagreenlinetoindicateitisselected.Youcanthenuseyourfingertodraganddropit,orselecttheXForm(Transform)buttonandusethetransformhandlestoresize,rotate,orrepositionthearea.

Clear:Selecttoclearthecurrentarea.

2Corner:Selecttocreatea2-corner(rectangularorsquare,with90-degreecorners)area.SeealsoToCreateaTwo-PointArea.

Multi-Point:Selecttocreateamulti-pointconcaveorconvexarea.SeealsoToCreateaMulti-PointArea.

36|www.Janome.com

CreateandUseAreasAquiltingareaisaportionofthePro-Stitcherscreenthatrepresentsanareaonthequilt.Withinthisarea,youcanplacedesigns,repeatthem,stretchthem,skewthem,cropthem,andsoforth,knowingthateverythingwithinthedefinedareaonthescreenwillmatchupwiththecorrespondingareaonthequilt. Areascanbeasimplerectangle,createdbyidentifyingtwoopposingcorners(2-cornerareas),ortheycanbemorecomplex,uniqueshapes,createdbyplottingmultiplepoints(multi-pointareas). Youcanhaveonlyoneareaonthescreenatanyonetime. However,afterplacingdesignsinanareayoucansafelyclosetheareaandthedesignwillremainwhereitisontheworkspacerelativetothequilt.Youcanalsosaveareasandopenthematalatertime.However,youwillneedtorepositionthearearelativetothequilt.ToCreateaTwo-CornerAreaToCreateaMulti-PointAreaWhenyoucreateanarearelativetoasectionofthequilt,theareaappearsontheworkspaceasasolidpurpleline.Ifyoumakechangestothearea,suchasresizeit,moveit,transform(X-Form)it,orrotateit,thelinebecomesadottedpurplelinetoremindyouthatitnolongerrepresentstheareaonthequilt.Similarly,whenyouopenasavedareafile,itappearsonthescreenasadottedlinebecauseitisnotpositionedrelativetoaspecificlocationonthequilt.Whenyouselectanarea,thedottedlineturnsgreen.Toopenanexistingareafile

• SelectFileTab>Area>Open,navigatetothedesiredfolder,andselecttheareafile(withafileextensionof.hpa).ThenselecttheOpenbutton.Iftheareafilewasusedrecently,itwillshowupinthedrop-downmenusoyoucanquicklyselectit.

• SelectAreaTab>File>Open.Navigatetothedesiredfolder,andselecttheareafile(withafileextensionof.hpa).ThenselecttheOpenbutton.Iftheareafilewasusedrecently,itwillshowupinthe

drop-downmenusoyoucanquicklyselectit. Toselectanareaintheworkspace

1. Openanexistingareafile,orcreateanewarea.SeeToCreateaTwo-CornerAreaorToCreateaMulti-Pointarea.

2. SelectAreaandthentheSelectbuttonontheArearibbon.Theareashouldappearonthescreenasadottedgreenlineindicatingthatitisselected.

3. Afterselectinganarea,youcantransform(X-Form)it,resizeit,orrotateit.

Tozoomtothearea

• Ifanareaisn'tfullyvisibleontheworkspace,selecttheZoomtoAreabuttonintheStatusBar.

Toclearanarea

• SelectAreaTab>Clear.Besuretosaveitifyouwanttousetheareaagain.

38|www.Janome.com

ToCreatea2-CornerAreaUsethe2-CornerAreaoptionwhencreatingrectangularorsquareareas.Tocreatearectangularareausing2Corner

1. Movethequiltingmachinesotheneedlelinesupwithonecornerofthedesiredarea onthequilt.Thenselect2Corner.

2. Apurpledotdisplaysonthe

screentoindicatethefirstcorner.Movethequiltingmachinesotheneedlelinesupwiththeoppositecornerofthedesiredareaonthequilt.

3. Select2Corneragain.Apurplerectangleindicatesthequiltingarea.

ResizingAreasYoucanresizeanareausingthesidebaroptionsorbyselectingtheareaandmanuallystretchingitusingXForm(Transform).TooverridethewidthorheightofanareausingSidebaroptions

ThewidthandheightoftheareaappearintheAreaSidebar.Youcanmodifythesevaluestocreateanareabeyondwhatthequiltingmachinecanreach.Forexample,perhapsyourquiltis80incheslong.ChangetheHeightto80tocreateanareathatcoversthefulllengthofthequilt.

• IntheSidebar,toucheithertheWidthnumberboxortheHeightnumberbox,enteranewvalueinthenumberpadthatappears,andthenselectEnter.Afteryouenteravalueineitherbox,theareaconvertstoarectanglewiththenewdimension(s).

• NOTE:Toseethefullareaonthescreen,selecttheZoomto

AreabuttonintheStatusBar. Toresizeanareamanuallyon-screen

1. SelecttheareabychoosingAreaTab>Select.Theboundaryoftheareaturnsfromapurplelinetoadottedgreenline.

2. SelecttheXForm(Transform)buttontoturnontheobject'shandles.

40|www.Janome.com

3. Touchoneoftheresizehandlesanddragyourfingertostretchorshrinkthearea.Touchoneofthecornerhandlestoresizeinboththehorizontalandverticaldirectionsatthesametime. Whenyouletgoofthehandle,theareafreezesinthatposition.

4. Whenyouarehappywiththesizeofthearea,selectanotherbuttonintheworkspacetoolbar.

ToCreateaMulti-PointAreaFormorecomplexareas,useMulti-Pointtomarkmultiplepointstocreatetriangles,hexagons,octagons,oranyshapewiththreeormorepoints. Tocreateanareawithmultiplepoints

1. Movethequiltingmachinesotheneedlelinesupwithonecornerofthedesiredareaonthequilt.(ItmaybenecessarytopresstheMotorsbuttonatthetop-rightcornerofthescreentounlockthemotors.)PressMulti-Point.

2. MovethemachinetoasecondpointalongtheperimeterofthequiltingareaandpressMulti-Pointagain.Apurplelinejoinsthetwomarkedpoints.

3. MovethemachinetoathirdpointalongtheperimeterofthequiltingareaandpressMulti-Point.Pro-Stitcherautomaticallyclosestheshape

42|www.Janome.com

backtothefirstpointwhenthethirdpointismarked,creatingapurpletriangletoindicatethemulti-pointarea.

4. Markotherpointsasdesiredtocreateadetailedquiltingarea. Tokeeptrackofhowmanypointsyouhavemarked

• ThePointCountboxintheAreasidebardisplayshowmanypointsyouhavemarked.Whenyouclearthearea,thepointcountgoesbacktozero.

RotatingAreas Youcanrotatetheareabyselectingtheareaandmanuallyrotatingit.Torotateanareamanuallyon-screen

1. SelecttheareabychoosingAreaTab>Select.Theboundaryoftheareaturnsfromapurplelinetoadottedgreenline.

2. SelecttheXForm(Transform)buttontoturnontheobject'shandles.

3. Touchthecircleanddragyourfingerclockwisetorotatetheareaclockwise,ordragyourfingercounterclockwisetorotatetheareacounterclockwise.

44|www.Janome.com

4. Whenyouarehappywiththerotationofthearea,selectselectanotherbuttonintheworkspacetoolbar.

ModifyTab Modifytabribbonbuttons

Baseline:UsetheBaselinebuttonto"freeze"themodificationsyouhavemadetothedesign. Allmodificationsafteryoubaselinetreatthedesignasanew,unaltereddesign.However,baselinedoesnotsavethedesigntoyourcomputer.

Rotate:SelecttheRotatebuttontoopentheRotatesidebar.Youcanrotateasingledesignormultipledesigns.

Reposition:UsetheRepositionoptionstopositionadesignrelativetotheneedleposition(representedbythecrosshairsonthescreen.

Crop:UsetheCropfunctioninconjunctionwithadefinedArea.Afteradesignhasbeenloadedandmodifiedasneeded,markanAreathatrepresentstheregiontobecropped.SelecttheCropbuttontoopentheCropsidebar.IftheCropsidebaroptionsarenotavailable,anAreahasnotyetbeendefined.

Resize:SelecttheResizebuttontoopentheresizeoptionsinthesidebar.Youcanadjusttheheightandwidth,aswellastheoriginalheightandoriginalwidth(ifthedesignhasbeenrotated).Youmayalsolocktheaspectratiosotheheightandwidthincreaseordecreaseproportionately.

Skew:Afteryoucreateanarea,usetheskewoptionstofitthedesignwithinthearea.Anyfurtherformattingyoudotothedesignwillalsostretchtothelimitsofthearea.TheSkewoptionsaren'tavailableuntilyoudefineanareaandopenadesign.

Align:Afteryoucreateanarea,usethealignoptionstopositionthedesignwithinthearea.ToopentheAlignmentSidebar,selecttheAlignbutton.Thenselectfromthealignmentbutton(s)topositionthedesignwithinthearea.

Swap:Usethisbuttonforthosetimeswhenyouwanttoswitchthequiltingstartandendpoints,suchaswhenyourotateorflipadesignandthestartpointisnowattherightsideofthedesign.

46|www.Janome.com

BaseliningDesignModificationsPro-Stitcherhasveryflexibledesigncapabilities.Eachfunctionyouchooseisreprocessedandreappliedwhenthenextfunctionisperformed.Forexample,youcanskewadesigntofitanareaandthenrotatetheskeweddesign.Thedesigncontinuestoskewasitrotatestokeepitwithinthearea. Thebaselinefeatureenablesyoutofreezethedesignatanypointinthedesignprocess,essentiallyfreezingallofyourdesignchoices.Thedesignisn'tsavedtothecomputer,buttheresize,rotation,andcropsettingsaremaintaineduntilyouchangethem. Tobaselineadesign

Atanypointinthedesignprocess,selectModify>Baseline.

Afteryoubaselineadesign,youwillnotbeabletouseanyofthedesignresetbuttonstoreturnthedesigntoitsoriginalsettings.However,youwillbeabletousetheUndoorRedofunctionsbasedonthedesignhistory.Afteryoubaselineagroup,thedesignsaremergedandthegroupistreatedasasingledesign.Youwillnotbeabletoworkwiththedesignsindividually.MachineQuiltingTip:PracticalUsesforBaseline

UsetheBaselinefunctiontostitchaquiltwithmultiple,identicalblocks.Marktheareaofthefirstblock,fitthedesigntotheblockusingSkeworotherfunctionstomodifythedesign,andthenbaselinethedesign.Quiltthefirstblock.CleartheArea.Thedesignwillmaintainitssizeandshape.Repositionthedesigntoanotherblockandquiltthedesign.Continuequiltingthebaselineddesignontheblocksthroughoutthequilt.UseBaselinewhenyouwanttocropmultipleshapesfromadesign.Markandcropthefirstarea,andthenselectBaseline.Cleartheareaandcreateanewareainanotherlocationforcropping.Continuetomarkandcropasdesired,followedbyselectingBaselineaftereachcroptocreatemultiplecroppedregionsinadesign.

ToRotateaDesignYoucanrotateasingledesignorseveraldesignsthathavebeengrouped. RotateSidebarButtons

Group:Torotaterepeateddesignsasaset,firstselecttheGroupbuttonandthenselecttherotation,mirror,orflipoptionyouwanttouse.

Single:Torotateeachdesignindividually,firstselecttheSinglebuttonandthenselecttherotation,mirror,orflipoptionyouwanttouse.

Reset:ChooseResettoturnoffanyrotationactionsyou'vemadesinceyousavedorbaselinedthedesign(s).

Counterclockwise45°:Selecttorotateselecteddesign(s)counterclockwiseby45degrees.

Clockwise45°:Selecttorotateselecteddesign(s)clockwiseby45degrees.

Mirror:PresstheMirrorbuttontomirrorthedesignvertically.Itisbesttobaselinethedesign(Modifytab>Baseline)followingaMirrorfunction.Otherwise,otherfunctions(suchasRotate)thatarebasedontheoriginaldesignorientation,willappeartobehappeningbackwards(i.e.aRotateclockwiseafteraMirrorwithoutpressingBaselinewillrotatecounterclockwise).

Flip:PresstheFlipbuttontoflipthedesignhorizontally.ItisbesttoBaselinethedesign(Modifytab>Baseline)followingaFlipfunction.Otherwise,otherfunctions(suchasRotate)thatarebasedontheoriginaldesignorientation,willappeartobehappeningbackwards.

2Point(start):Definesthestartpointforcreatingalinethatrepresentstheangletowhichthedesignwillberotated.SeeTorotateadesignoradesigngroupaccordingtoanangleonthequiltbelow.

48|www.Janome.com

End(of2Pointrotation):Definestheendpointforcreatingalinethatrepresentstheangletowhichthedesignwillberotated.SeeTorotateadesignoradesigngroupaccordingtoanangleonthequiltbelow.

Tomirror,flip,orrotateadesign45°clockwiseorcounterclockwise

• SelectModify>RotatetorotateadesignandopentherotateoptionsintheSidebar.SelectthedesignandthenselectoneoftherotatebuttonsintheSidebar.Choosetorotatethedesignin45-degreeincrements,eitherclockwiseorcounterclockwise.Orchoosetomirrororflipthedesign.

Originaldesign

Designrotated45°clockwise

Designrotated45°counterclockwise

50|www.Janome.com

Designmirrored

Designflipped

TorotateadesignbasedonacustomrotationvalueInadditiontousingtherotationbuttons,youcanspecifyacustomrotationvalue.Thedumptruckwasrotatedtotheright33degreesintheimagebelow.

1. SelectModify>Rotate.Specifyarotationvalue(indegrees,from1to359)intheRotationbox.

2. ThenselecteithertheCounterclockwisedirectionbuttonortheClockwisedirectionbutton.

3. TocontinuerotatingbythespecifiedRotationvalue,selecteithertheCounterclockwisedirectionbuttonortheClockwisedirectionbutton.

Toreturnthedesigntoitsnon-rotatedstate

• SelectModify>Rotate.ThenselecttheResetbutton. Torotate,mirror,orfliprepeateddesignsoradesigngroupIfyouselectmultipledesigns,itbecomesadesigngroup.Whenyourotate,mirror,orflipthedesigngroup,itistreatedasasingledesign.SelecttheGroupbuttonontheRotatesidebar;thenselecttherotateoption.

52|www.Janome.com

Designgroup

Designgrouprotated45degreescounterclockwiseFormoreinformationaboutcreatingdesigngroups,seeDesignGroupsundertheEditTab.

2-PointRotation2-PointRotationusesthequiltingmachinetoidentifyalinethatrepresentstherotationangle.You’llsetastartpointandanendpointtocreatealinethatrepresentstheangletowhichthedesignwillalign. Torotateadesignoradesigngroupaccordingtoanangleonthequilt

2PointStart:Usetosetthestartpointforalinethatrepresentsthecustomrotationangle.

2PointEnd: Usetosettheendpointforthelinethatrepresentsthecustomrotationangle.

1. Movethequilting

machinetoapointonthequiltleftofthelinetofollowandselect2PointStart.

54|www.Janome.com

2. Movethemachinetoapointfurthertotherightalongtheangledline.

3. Select2PointEnd.Thedesignrotatedtomatchtheanglecreatedbythetwopointsselectedinsteps1and2.

4. TherotationangleappearsintheCustomRotationboxinthesidebarandthedesignrotatestomatchtheangle,-30.80degreesinthisexample.

MachineQuiltingTip:Use2-Pointrotationtoquilt sashinginanon-pointquilt

Createanareathatrepresentsthesashingtobequilted.Loadthedesignandmakedesignchanges,suchasresizeandcreaterepeats.Thedesignwillbehorizontalonthescreen.Thenuse2-Pointrotationtorotatethedesigntomatchthequilt.Positionthemachine’sneedlealongtheangledsashingseamlineandselectthe2-PointStartbutton.Movethemachine’sneedletoaspotalongthesameseamlineandselectthe2-PointEndbutton.Thedesignrotatestomatchtheangleyoudefined.

Tofinetunetheangleofrotation

• Redefineeitherthestartpointortheendpointasnecessarybymovingthequiltingmachinetoanewlocationandpressingeither2PointStartor2PointEnd,dependingonwhichendofthelineneedstoberepositioned.

• NOTE:Astartpointontheleftfollowedbyanendpointontheright

(i.e.astraightlinewithstartontheleftandendontheright)isa0°rotation,ornorotation. Astartpointontherightandanendpointontheleft(i.e.astraightsameline,butwiththestartandendpointsreversed)isa180°rotation,orinotherwords,thedesignwillbeupsidedown.

56|www.Janome.com

Tomanuallyrotateadesign

• SelectthedesignandthentouchtheXForm(Transform)buttonintheWorkspacetoolbar.Touchtheroundhandleabovethetop-rightcornertorotatethedesign.SelectanotherbuttonintheworkspacetoolbartoturnofftheXFormfunctions.

CroppingDesigns UseCropmenufunctionsinconjunctionwithareas.Aftermodifyingadesignasneeded,markanareathatrepresentstheregiontobecropped.SelectModifyTab>Crop.NOTE:IftheCropSidebarbuttonsaregrayedout,youhaven'tyetcreatedanarea.DefinetheareatobecroppedbeforeusinganyoftheCropfunctions. CropSidebarButtons

None:Returnsthedesigntoanuncroppedstate.

Cropoutside:Cropsthedesignoutsideofthedefinedarea.

Cropinside:Cropsthedesignwithinthedefinedarea.

Cropstart/end:Cropsthedesignbeforethestartpointandaftertheendpoint.Usethisoptionaftermovingthestartandendpoints(Pro-Stitcher>NewStart/End).Formoreinformationaboutchangingthestartandendpoints,seeNewStart/End.

Edges:Whenselected,thisbuttonindicatesthatanyopenedges,orjumppoints,thatresultedfromacropwillbeclosed.EachjumppointcreatedafteraCropwillbetiedtothenextendpointbystitchingalongtheborderoftheAreatogettothenextpoint.Toperformatieoffinsteadwherejumppointsresultedfromthecrop,disabletheEdgesbuttoninstead.

TocropbasedonanareaThisexamplecropsbasedonastar-shapedarea.Perhapsyouwanttoquiltacross-hatch,orgrid,designaroundastar-shapedappliqué.Youcreatetheareaandcropinsidethearea.Or,tocropwithinthestar-shapedareaonly,cropoutsidethearea.

58|www.Janome.com

1. Aftermodifyingadesignasneeded,createanareathatrepresentstheregiontobecropped.Thisisamulti-pointareaintheshapeofastar.FormoreinformationseeToCreateaMulti-PointArea.

2. ThenselectModifyTab>CroptoopenthecroppingoptionsontheSidebar.Youmusthavedefinedanareainorderforthecropoptionstobeavailable.

3. Tocropoutsideofthedefinedarea,selectOutside.Tocropinsidethedefinedarea,selectInside.Toremovethecropandreturntothewholedesign,selectNone.

Croppedinsidewithclosededges,orjumppoints

60|www.Janome.com

Croppedoutsidewithclosededges,orjumppoints

IndicatehowyouwanttohandleedgesPro-Stitcherhastwowaysofhandlingedges,orjumppoints,thatarecreatedfromacrop:openorclosed.

MachineQuiltingTip:TostitcharoundthecroppedareaTheentireareaoutlineofthecroppedareamaynotbestitched.

Considerusing TraceAreatoforcePro-Stitchertostitcharoundtheperimeterofthearea.SelectPro-Stitcher>Stitch;thenselectTraceAreaintheStitch

sidebar.

Toperformatieoffatjumppoints

• DisabletheEdgesbuttontoperformatieoffatthejumppointsinacroppeddesign.Specifywhichtie-offmethodtousebyselectingtheSettingsbutton.ThenselectTieOfftoopentheTieOffsidebar.Formoreinformationaboutthetie-offsettings,seeTie-offStitches.

Tostitchbetweenjumppoints

• SelecttheEdgesbuttontostitchalongtheborderofthecroppedareabetweenjumppointsinacroppeddesign.

Toisolateandcropaportionofthedesignusingthestartandendpoints

1. Loadadesign,suchastheRoadSignscontline.hqfdesign.Perhapsyouonlywanttousethetrafficlightandthecurvedroadsign.

2. SelectPro-Stitcher>NewStart/End.

3. UsethesliderbarsandarrowsintheSidebartomovethestartandendpoints.

62|www.Janome.com

4. SelectModifyTab>Crop.

5. SelectStart-EndintheCropsidebartocropawaythedesignbeforethestartpointandaftertheendpoint.Savethedesigntoanewfilenamesoyoucanuseitagaininthefuture.

• NOTE:If the design has been repeated, baseline before cropping to create a single start and end point for the repeated designs. Otherwise Pro-Stitcher won't know which start and end points to use for the crop.

64|www.Janome.com

ResizingDesigns

• ToopentheresizeoptionsintheSidebar,selectModifyTab>Resize. ResizeSidebarButtons

NoResize:Selecttoresetanyresizingchangesyou'vemadesinceopeningthedesignorperformingaBaseline.

Lockaspectratio:Selecttolocktheaspectratio.WhenLockison,theimageisconstrainedtomaintainitsoriginalaspectratio.Anychangetoonedimension(Width,Height,OriginalWidthorOriginalHeight)ofthedesignensurestheotherdimensionscalesproportionately.Thisensuresthatthedesigndoesnotbecomedistortedinonedimension.

Width:Selecttochangethewidthofthedesign.ThenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethatdimension.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screennumberkeypad.

Height:Selecttochangetheheightofthedesign.ThenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethatdimension.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screennumberkeypad.

OriginalWidth:Selecttochangetheoriginalwidthofarotateddesign. ThenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethatdimension.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screennumberkeypad.

OriginalHeight:Selecttochangetheoriginalheightofarotateddesign. ThenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethatdimension.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screennumberkeypad.

TolocktheaspectratioBeforeyoumakeresizingchanges,decidewhetheryouwanttoensurethatthedesign'saspectratioremainsconstantasyoumakesizingchanges.Toensurethewidthandheightadjustinproportiontotheoriginalaspectratio,firstselecttheLockbuttontolocktheaspectratio.

Tolocktheaspectratio

• Beforemakinganyresizingmodifications,selecttheLockbuttonontheResizeSidebar(Modify>Resize).

Toresizeadesign

1. Openadesign.Or,ifyouhavemorethanonedesignopen,selecttheoneyouwanttoresize.

2. OntheResizeSidebar,selectoneoftheheightorwidthbuttonsandpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethatdimension.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screennumberkeypad.

66|www.Janome.com

ResizingRotatedDesignsIfyouhaverotatedadesign,youcanresizeitalongtheoriginalaxisbyselectingtheOriginalWidthbuttonortheOriginalHeightbutton.Otherwiseitwillresizehorizontallyorverticallyaccordingtohowitisorientedonthescreen. TheOriginalHeightandOriginalWidthbuttonsareaccessibleonlyifadesignhasbeenrotated.

Tostretchorshrinkarotateddesignalongtheoriginalwidth(originalXaxis)

• Tostretchorshrinkthedesignalongtheoriginalwidthratherthanhowitisorientedonthescreen,selecttheOriginalWidthbutton(withtheblueangledline)andthenintheSidebarpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethesizeofthedesign.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screenkeyboard.

68|www.Janome.com

Tostretchorshrinkarotateddesignalongtheoriginalheight(originalYaxis) AfteryouselecttheOriginalHeightbutton,ayellowlineshowstheoriginalYaxis,ororiginalheight,ofthedesignbeforeitwasrotated.

• TostretchorshrinkarotateddesignalongitsoriginalYaxisratherthanhowitisorientedonthescreen,selecttheOriginalHeightbutton(withtheyellowangledline)andthenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethesizeofthedesign.Youcanalsotapthenumberboxtodirectlyenterthenewsize(ininches)usingtheon-screenkeyboard.

IncreasedWidthofarotateddesign

IncreasedOriginalWidthofarotateddesign

70|www.Janome.com

IncreasedHeightofarotateddesign

IncreasedOriginalHeightofarotateddesign

On-screenResizing

Youcanalsoresizeadesignbyselectingitandusingthehandlestostretchorshrinkthedesign.

Tomanuallyresizeadesign

1. Openadesign.Or,ifyouhavemorethanonedesignopen,selecttheoneyouwanttoresizebychoosingtheSelectbuttonintheQuick-AccessToolbarandthentouchingthedesign..

2. SelectXForm(Transform)toturnonthedesignhandles.

Beforemanualresizing

72|www.Janome.com

Aftermanualresizing

3. Selectoneofthehandleswithyourfingeranddragouttoincreasethesizeordragintodecreasethesize.Thewidthoftheexampleabovehaditswidthreduced.Selectoneofthecornerhandlesanddragdiagonallytoincreaseordecreasetheimagesizebothhorizontallyandvertically.

• NOTE:BesuretoselecttheLockbuttonintheSidebarifyouwanttomaintaintheaspectratiowhenmanuallyresizingthedesign.

SkewingDesignstoanAreaAfteryoucreateanarea,usetheskewoptionstofitthedesignwithinthearea.Anyfurtherformattingyoudotothedesignwillalsostretchtothelimitsofthearea.

• NOTE:TheSkewoptionsaren'tavailableuntilyoudefineanareaandopenadesign.

• SelectModifyTab>Skew. SkewSidebarButtons

NoSkew:SelecttheNoSkewbuttontoreturnthedesigntoitsoriginal(unskewed)sizeandshape.

Skew1:ChooseSkew1toskewwithinconvexareas,suchasrectanglesandhexagons.

Skew2:ChooseSkew2toskewwithinconcaveareaswithfourormorepoints,suchasareaswithirregularborders.

Toskewadesigntofitaconvexarea

1. Createaconvexarea,anon-pointsquareinthisexample.

74|www.Janome.com

2. Loadadesign.

3. Thenrotatethedesignifnecessary(ModifyTab>Rotate),by45°inthisexample.

4. ChooseModifyTab>Skew.ThenselectSkew1fromthesidebar.Thedesignskewstofillthearea.

ToskewadesigntofitaconcaveareaPro-Stitchercanskewadesigntofitwithinaconcavearea.

1. Loadadesign,suchastheDumpTruck.Rotate,repeat.crop,orresizethedesignasdesired.

2. SelectModifyTab>Area>Multi-Pointtocreateaconcavearea.

76|www.Janome.com

3. ChooseModifyTab>Skew.ThenselectSkew2fromtheSkewsidebar.Thedesignwillskewtofitthearea.

• NOTE:TousetheModifyribbonbuttons,makesureyouhaveselecteda

design.

AligningDesignsAfteryoucreateanarea,usethealignmentoptionstopositionthedesignwithinthearea.

• ToopenthealignmentoptionsintheSidebar,selectModifyTab>Align.Thenselectthealignmentbutton(s)toalignthedesignwithinthearea.

AlignSidebarButtons

HorizontalAlignment:Left:Alignstheleftsideofthedesign’sboundingboxwiththeleftmostsideofthearea.

78|www.Janome.com

HorizontalAlignment:Center:Alignsthehorizontalcenterofthedesign’sboundingboxwiththehorizontalcenterofthearea.

HorizontalAlignment:Right:Alignstherightsideofthedesign’sboundingboxwiththerightmostpointofthearea.

VerticalAlignment:Top:Alignsthetopofthedesign’sboundingboxwiththetopofthearea.

VerticalAlignment:Center:Alignstheverticalcenterofthedesign’sboundingboxwiththeverticalcenterofthearea.

80|www.Janome.com

VerticalAlignment:Bottom:Alignsthebottomofthedesign’sboundingboxwiththelowestsideofthearea.

Stretch:Horizontal:Stretchesorshrinksthedesignsotheleftsideoftheboundingboxalignswiththeleftsideoftheareaandtherightsideoftheboundingboxalignswiththerightsideofthearea.

Stretch:Vertical:Stretchesorshrinksthedesignsothetopoftheboundingboxalignswiththetopsideoftheareaandthebottomoftheboundingboxalignswiththebottomsideofthearea.

Center:Centersthedesignbothhorizontallyandvertically.

82|www.Janome.com

Stretch:Stretchesthedesignbothhorizontallyandverticallytofillthearea.

ToalignatriangledesignUsetheAlignmenttoolsratherthanSkewtoplacetriangle,orcorner,designswithinatrianglearea.

1. Loadatriangledesign.2. Createatriangle-shapedareausingAreaTab

>Multi-Point.

3. Rotatethedesign45°ifnecessary.

4. SelectModifyTab>Align.

5. SelectHorizontalAlignment:Left.

84|www.Janome.com

6. ThenselectVerticalAlignment:Top.

7. UseModifyTab>Resizetofitthetriangledesignintotheareaifdesired.

RepositioningDesignsThemainwaytopositionadesignforquiltingistocreateanareabasedonyourquiltandthentousetheReposition,Skew,orAlignoptionstopositionthedesignrelativetothatarea.However,youcanusetherepositionfunctionsevenifyouhaven’tdefinedanarea.

• NOTE:Youcan’tusetheSkewandAlignfunctionswiththeRepositionfunctions.Forexample,ifyouskewadesigntoadefinedareaandthenselectoneoftherepositionoptions,theSkewandAlignsettingsareturnedoff(essentiallyresettingthedesigntoitsoriginalshape)andtherepositionactiontakesplace.

MachineQuiltingTip:Toquiltaskeweddesignmultipletimes

Ifyouwanttostitchaskeweddesignmultipletimesonthequilt,baselinethedesign(Modify>Baseline)andthenrepositionthedesign.

Topositionadesigntotheintersectionofthecrosshairs

• Movethequiltingmachineneedletoapositiononthequiltwherethedesignistobequilted.ThenrepositionthedesignusingoneoftheRepositionSidebarbuttons.

RepositionSidebarButtons

TopLeft:Positionstop-leftcornerofthedesignattheintersectionoftheorangecrosshairs(needleposition).

86|www.Janome.com

TopRight:Positionsthetop-rightcornerofthedesignatintersectionoftheorangecrosshairs(needleposition).

BottomLeft:Positionsthebottom-leftcornerofthedesignattheintersectionoftheorangecrosshairs(needleposition).

BottomRight:Positionsthebottom-rightcornerofthedesignattheintersectionoftheorangecrosshairs(needleposition).

StartPoint:Positionsthedesign'sstartpointattheintersectionoftheorangecrosshairs(needleposition).

EndPoint:Positionsthedesign'sendpointattheintersectionoftheorangecrosshairs(needleposition).

Center:Positionsthecenterofthedesignattheintersectionoftheorangecrosshairs(needleposition).

88|www.Janome.com

Drag:SelecttheDragbuttonandthenusethemachinetomovetheneedle(representedbythecrosshairs)tothedesiredlocation.TheDragbuttonbecomesaDropbutton.Whenthemachineisinposition,touchtheDropbutton.

Zero:PositionsthedesignaccordingtotheZerolocation(wherex=0andy=0).Dependingonhowthemotifdesignercreatedthedesign,thezerolocationmaybethestartpointofthedesign,itmaybeinthemiddle,oritmaybeatanotherpointinthedesign.SomedigitaldesignersusetheHomelocationforpositioning.

NudgingDesignstoReposition

Torepositionadesignup,down,left,right,ordiagonally

• Enteradistance(ininches,downto.01ofaninch)intheNudgenumberbox.Thenselecttheappropriatearrowtonudgethedesignup,down,left,right,ordiagonally.Thisisespeciallyusefulifyouwanttonudgethedesigninminuteincrements.Youcanalsoselectthedesignanduseyourfingertomoveitonthescreenforlessprecisemovesonthescreen.

• NOTE:SetthedefaultnudgevalueunderSettingsTab>Defaults.YoucanalwaysoverridethedefaultontheRepositionsidebar.

SwappingaDesign'sStartandEndPointsTheremaybetimeswhenyouwanttoswitchthequiltingstartandendpoints,suchaswhenyourotateorflipadesignandthestartpointisnowattherightsideofthedesign.UsetheModify>Swapoptiontodothis. SwapSidebarButtons

Swapsthedesign'sstartandendpoints.

Toswapthequiltingstartandendpointsforadesign

1. Loadadesign.

2. Modifythedesignasdesired.Forexample,perhapsyouwantthisdinosaurdesigntoquiltinthetopborderupsidedown.

90|www.Janome.com

3. ChooseModifyTab>Swap.Thestartandendpointsimmediateswap.Youwillseeamessagealongtherightsideoftheworkspacetoindicatethattheswaptookplace. You'llalsonoticethatthestart(green)andend(red)pointshavebeenswitchedandthedesignwillnowstitchfromlefttoright.

RepeatTabUsingadefinedareainconjunctionwiththeRepeatoptionswillstretch,skew,orfitthedesirednumberofrepeatswithinthatarea.Ifanareahasnotbeendefined,theoptionstostretchandfitwillbedisabledbecausetheyrequireanareatostretchorfitto. Repeattabribbonbuttons

Basic:Providesseveraloptionsforrepeatingdesignsbothverticallyandhorizontally.Ifyouhavecreatedanarea,youcanalsohavePro-Stitcherdeterminehowmanyrepeatswillfitwithinthearea.

Wrap:Providesseveraloptionsforwrapping,oroffsetting,designseitherverticallyorhorizontally.Mostoftheseoptionscanbedonewithorwithoutadefinedarea.

92|www.Janome.com

BasicRepeat

• ToopentheBasicrepeatingoptions,selecttheRepeattab.ThenselectBasic. BasicRepeatSidebarButtons

Horizontal:Selecttorepeatthedesignhorizontally.ThenusethePlusSign(+)toincreasethenumberoftimesyouwanttorepeatadesign.Todecreasethenumberofrepeatsthatappearon-screen,presstheMinusSign(–). Alternately,taponthenumberboxandenterthedesirednumberofrepeatsintothepop-upnumberbox.ThenpressEnter.

Vertical:Selecttorepeatthedesignvertically.ThenusethePlusSign(+)toincreasethenumberoftimesyouwanttorepeatadesign.Todecreasethenumberofrepeatsthatappearon-screen,presstheMinusSign(–). Alternately,taponthenumberboxandenterthedesirednumberofrepeatsintothepop-upnumberbox.ThenpressEnter.

P2P(PointtoPoint):Designsthatareintendedtobelinkedtogetherhorizontallyorverticallybutmustbeoverlappedforthestartandendpointstomatchup.FirstselecteitherHorizontalorVerticalandthenP2Ptoautomaticallylinksthedesigns.

Fit:Defineanareaandopenadesign.PressFittohavePro-Stitchercalculatetheoptimalnumberofrepeatsbothhorizontallyandvertically.Addmorehorizontalorverticalrepeatsifdesired,andthenstretchthemverticallyandhorizontallytofitthemtothearea.

Stretch:Tostretchtherepeateddesignverticallyorhorizontally,selecttheHorizontalbuttontostretchthedesignhorizontallyortheVerticalbuttontostretchthedesignvertically.ThenpresstheStretchbutton.

NoRepeat:SelecttheNoRepeatbuttontoturnofftherepeatsyou'vemadesincesavingorbaseliningthedesign.

Torepeatadesign

• Createanareaandloadthedesigntoberepeated.SelectRepeat>Basic.Thenaddrepeatshorizontallyorvertically.YoucanalsoselecttheFitbuttonontheRepeatsidebartohavePro-Stitcherestimatethenumberofrepeatstofillthearea.

Toaddrepeatsverticallyorhorizontally

1. SelecttheHorizontalbuttontorepeatthedesignhorizontallyortheVerticalbuttontorepeatthedesignvertically.

2. PressthePlusSign(+)forRepeatstoincreasethenumberoftimesyouwanttorepeatadesign.Todecreasethenumberofrepeatsthatappearon-screen,presstheMinusSign(–).

Alternately,taponthenumberboxandenterthedesirednumberofrepeatsintothepop-upnumberbox.ThenpressEnter.

• NOTE:Iftherepeateddesignincludesjumppoints,Pro-Stitcherpreservesthemwhenyousavethedesign.

94|www.Janome.com

Toautomaticallycalculatetheoptimalnumberofrepeatsforanarea

1. Defineanareaandopenadesign.2. PressFittohavePro-Stitchercalculatetheoptimalnumberofrepeatsinboth

heightandwidth.3. Addmorehorizontalorverticalrepeatsifdesired,andthenstretchthem

verticallyandhorizontallytofitthearea. Tostretchtherepeateddesignverticallyorhorizontally Youcanstretchadesigntofiteitherthewidthortheheightofanarea.

1. SelecttheHorizontalbuttontostretchthedesignhorizontallyortheVerticalbuttontostretchthedesignvertically.

2. PresstheStretchbutton. Thedesignbelowhasonemorerepeataddedbothverticallyandhorizontally.Thenitwasstretchedbothverticallyandhorizontally.

TomodifythegapbetweenrepeateddesignsYoucanchangetheverticalandhorizontalspacingbetweenrepeateddesignssothemotifsnesttogether.

1. SelecttheHorizontalbuttontochangethehorizontalgapbetweendesigns,ortheVerticalbuttontochangetheverticalgapbetweendesigns.

2. PressthePlusSign(+)toincreasethesizeofthegap.PresstheMinusSign(–)todecreasethesizeofthegap.

• Alternately,tapthenumberboxandenteravalue(ininches)toincreaseordecreasethesizeofthegapbetweenrepeateddesigns.Tooverlapthedesigns,enteranegativevalue.

Thehorizontalandverticalgapsinthedesignbelowweresetto.5.

96|www.Janome.com

PointtoPoint Somedesignsareintendedtobelinkedtogetherhorizontallyorverticallybutmustbeoverlappedforthestartandendpointstomatchup.TheP2P(PointtoPoint)buttonlinksthestartandendpointsofrepeateddesigns. Tojoinhorizontallyrepeateddesigns

• Tolinkdesignshorizontally,ensurethestartandendpointsareatthesameverticalposition.ThenselecttheHorizontalbutton,followedbytheP2Pbuttontoalignthedesignssuchthattheendpointoftheonedesignmatchesupwiththestartpointofthenextdesign.

TheBaptistFandesignbeforeusingpoint-to-point:

TheBaptistFandesignbelowshowshowPro-StitcherjoinedthehorizontalstartandendpointswithP2P.

To learn how to wrap the design rows so the open space at the edges of the Baptist Fan quilt are filled in, see WrappingDesigns.

98|www.Janome.com

WrappingDesigns Usethewrappingoptionsinconjunctionwithrepeateddesigns.Theoptionsenableyoutoshiftrowsofrepeateddesigns,oroffsettheentiredesignwindow.

• ToopentheWrappingoptions,selecttheRepeattab.ThenselectWrap. WrappingSidebarButtons

Horizontal:Selecttousethehorizontalwrappingoptions.

Vertical:Selecttousetheverticalwrappingoptions.

HalfWindow(Vertical):SelecttoShiftsallcolumnsofrepeateddesignsbyhalfoftheheightofthedesign.

HalfWindow (Horizontal):shiftallcolumnshorizontallybyhalfofthewidthofthedesign

HalfRow(Horizontal):Selecttoshiftallrowshorizontallybyhalfofthewidthofthedesign.

Edges:Selecttocloseopenedges,orjumppoints,afterwrapping.ThejumppointswillbetiedtothenextendpointbystitchingalongtheborderoftheAreatogettothenextpoint.Ifyoudon'tselectthisbutton,Pro-Stitcherwillperformatieoffsoyoucancutthethreadbeforecontinuing.

Drag:Tomanuallyshifttherepeateddesign,selecttheDragbuttonandthenuseyourfingertodragthedesigntoitsnewposition.Whenyouarehappywiththeposition,touchtheDragbuttonagaintoturnitoff.

NoWrap:Removesallofthewrappingactionsandresetsthedesigntoitsunwrappedstate.

100|www.Janome.com

P2P(PointtoPoint):Somedesignsareintendedtobelinkedtogetherhorizontallyorverticallybutmustbeoverlappedforthestartandendpointstomatchup.SelecteithertheHorizontalorVerticalbuttonandthenuseP2Ptolinkthedesigns.

TohorizontallywraprowsChoosefromtheRowoptionsintheWrappingsidebartospecifyhowtowraprows.Thisdesignisnotwrapped.

• Toshift,orwrap,everyotherrowofrepeateddesigns(beginningwiththesecondrow)byhalfofthewidthofthedesign,selecttheHorizontalbuttonandthenthe1/2buttonforrows.Theresultisshownbelow.

Youcanalsowrapinsmallerorlargerincrements:

• SelecttheHorizontalbuttonandthentherightarrowbuttonforrowstoshifttherowtotherightby1/8inch.Selecttheleftarrowbuttontoshifttherowtotheleftby1/8inch.

• OrtouchthenumberboxunderRowandusethenumberpadtoenteravalue(ininches)tooffsetrows.Forexample,tomoveeveryotherrowbyoneinchtotheright,enter1.Tomoveeveryotherrowbyoneinchtotheleft,enter-1.AfteryouselectEnter,therowsshiftaccordingly.

Tohorizontallywrapthedesignwindow

ChoosefromtheWindowoptionsintheWrappingsidebartospecifyhowtowrapthedesignswindowhorizontally.Thiswrapsalloftherowsaccordingly.

• Toshiftallrowshorizontallybyhalfofthewidthofthedesign,selecttheHorizontalbuttonandthenthe1/2button.

102|www.Janome.com

• Toshiftallrowstotherightby1/8inch,selectthetheHorizontalbuttonandthentherightarrowbuttonforWindow.

• Toshiftallrowstotheleftby1/8inch,selecttheHorizontalbuttonandthentheleftarrowbuttonforWindow.

• OrtouchthenumberboxunderWindowandusethenumberpadtoenteravalueininchestoshifttherepeateddesigns.Forexample,tomoveallrowsbyoneinchtotheright,enter1.Tomoveallrowsbyoneinchtotheleft,enter-1.WhenyouselectEnter,therowsallshiftaccordingly.

Toverticallywrapthewindow

Nowrapping

Windowwrappedverticallybyhalf

104|www.Janome.com

• Toshiftthewindowofrepeateddesignsbyhalfoftheheightofthedesign,selectthe1/2button.

• SelecttheuparrowbuttonunderWindowtoshiftthecolumnsupby1/8inch.

• SelectthedownarrowbuttonunderWindowtoshiftthecolumnsdownby1/8inch.

Pro-StitcherTabThefunctionsonthePro-Stitchertabenableyoutoquiltyourdesigns. MachineQuiltingTip:SetyourstitchregulationmodetoCruise

JanomerecommendsthatbeforequiltingyousetthequiltingmachinetoCruisestitchregulationmode,atapercentageof3to5%.Ifthepointsandrightanglesarenotcreatingsharppoints,tryincreasingtheCruisepercentageonyourquiltingmachineto10%or15%.

Pro-Stitchertabribbonbuttons

HalfStitch:Selecttocycletheneedleeithertotheuporthedownpositionbasedonthecurrentpositionoftheneedle.

FullStitch:Selecttocycletheneedleafullstitchtotheupposition.Iftheneedleisinthedownposition,itwillmoveonlyahalfcyclesoitstopsintheupposition.Subsequentpressesofthebutton,however,willcycleafullstitch,alwaysendingwiththeneedleintheupposition.

Follow:SelectFollowwhenyouwanttoensurethatthecrosshairsremaininviewwhenyouhavezoomedintoadesign.ThissavesyoufromhavingtousePantofindthecrosshairs.ItisalsohelpfultoenableFollowwhenyoustitchawidedesignbecauseyoucanbothzoominonthedesignandalwaysseewhatisbeingstitchedonthescreen.

Measure:Selecttomeasuredistancesinadesignordirectlyonthequilt.

Quilt:Selectwhenyouarereadytobeginquilting;thenselectRun.IfVerifyBeforeQuiltisenabled(SettingsTab>Advanced>General),Pro-Stitcherdisplaysallofthesettingsforyoutoreview.PressProceedtocontinue.

NewStart&End:Usethisbuttontostartquiltingadesignfromsomepointotherthanthedesign'sstartpoint.Youmayneedtodothisbecausethethreadbreaks,thebobbinrunsout,oryousimplywanttostitchaspecificportionofadesign.Similarly,youmaychangetheendingpointtoapointotherthanthedesign’soriginalendpoint.

106|www.Janome.com

Move:TheMoveoptionenablesyoutomovethequiltingmachineinanyofthe8directionsindicatedbythedirectionarrowsbysimplypressingthatarrowbutton.SelecttheContinuousbuttonforthemachinetomovecontinuously,selecttheStitchbuttontostitchasyoupressthearrowbutton,orselectboththeContinuousandStitchbuttonstostitchcontinuously.PresstheStopbuttontoturnofftheContinuousoperation.

ChannelLock:SelectthisbuttontohavePro-Stitcherstitchhorizontalorverticallinesthatareperfectlysquarewiththeframe.OntheChannelLocksidebar,chooseeithertheHorizontalorVerticalbuttonandbeginstitching.

Record:Pro-Stitchercanrecordthemovementofthequiltingmachine.Forexample,recordyourownall-overbackgrounddesignsacrossthewidthofthequilt.Orrecordyoursignaturesoyoucanquiltyoursignatureintoyourquilts.

Gears:TypicallyyouwillengagethePro-Stitchermotorswhenusingcomputerizedquiltinganddisengagethemforfree-motionquilting.ChoosetheGearsbuttontoautomaticallyengageordisengagethemotorsifyouhaveanEZCarriage.Ifyouhaveacarriagewithlevers,manuallyraisetheleverstodisengageorlowerthemtoengagethemotors.IfyouaregoingtohavePro-Stitcherrecordyourstitching(Pro-StitcherTab>Record),disengagethemotorsforasmootherfree-motionquiltingexperience.

ClearTrace:AsPro-Stitcherstitches,theportionofthedesignthathasbeenstitchedturnstoorangeonthescreen.Atanytimeyoucanclearthat"tracing"bychoosingtheClearTracebutton.Ifyouareintheprocessofstitchingoutthedesign,firstselectthePausebuttonandthenClearTrace.ThenpressResumetocontinuestitching.

QuiltingtheDesignStitchingSidebarButtons

Stitch:SelecttoindicatethatPro-Stitchershouldquilt,ratherthantracethedesign,boundingbox,and/orarea.

CutThread:ThisbuttonisavailableforHQInfinityversionsofPro-Stitcheronly.ItwillactivatetheInfinitythreadcuttertocutthebobbinthread.

Start:Atie-offstitchwillbeperformedatthebeginningofstitching.

End: Atie-offstitchwillbeperformedattheendofstitching.

Pull-upOn:SelectPull-upOnforPro-Stitchertocycletheneedletobringupthebobbinthreadanddisablethemotorsforyoutomovethemachineandpullupthebobbinthread.PressResumetocontinuewhileholdingontothethreads.Ifyoudonotselectapullupoption,youwillneedtomanuallypullupthebobbinthreadbeforestitching.

Pull-upAuto:SelectPull-upAutoforPro-Stitchertocycletheneedletobringupthebobbinthreadandthenautomaticallymovethemachineasideandpauseforyoutopullupthebobbinthread.PressResumetocontinuewhileholdingontothethreads.Ifyoudonotselectapullupoption,youwillneedtomanuallypullupthebobbinthreadbeforestitching.

TraceBounds:Selecttohavethemachinetracetheboundingboxaroundthedesign.IftheStitchbuttoninthesidebarisalsoselected,Pro-Stitcherstitchesratherthantracestheperimeteroftheboundingbox.DisabletheStitchbuttonto"airstitch"theboundingbox.

TraceArea:Selecttohavethemachinetracethearea.IftheStitchbuttoninthesidebarisalsoselected,Pro-Stitcherstitchesratherthantracestheperimeterofthearea.DisabletheStitchbuttonto"airstitch"thearea.

108|www.Janome.com

Tobeginstitching

Run:Afterthedesignhasbeenmodified,positioned,andisreadytobestitched,selectthePro-Stitchertab,theStitchbutton,andthenRun.Ifthesettingsarecorrect,pressProceedtobeginstitching.Otherwise,pressCancel.

• NOTE:IfyouselectedtheoptiontoVerifySettingsbeforeQuiltinginthequiltsettings,a

pop-upVerifySettingsboxappearssoyoucandoublecheckthesettingsbeforestitching.Formoreinformation,seeToVerifySettingsBeforeQuilting.

Tochoosebetweenstitchingortracingthedesign,boundingbox,orareaperimeter

Stitch:MakesuretheStitchbuttoninthePro-Stitchersidebarisselectedforthemachinetostitchthequiltaccordingtotheselectionsyoumake.Todisablestitching,pressthedarkenedStitchbutton.IftheStitchbuttonisdisabled,Pro-Stitchertracesthedesign,boundingbox,orareaperimeterwiththemachinebutdoesnotstitch.SelecttheStitchbuttonagaintoenablestitching.

Toimmediatelystopthemachinefromquilting

Stop:Ifyoumustimmediatelystopthemachinewhilequilting,presstheStopbutton.UnlikePause,whichbringsthemachinetoagentlestop,theStopbuttonimmediatelystopsPro-Stitcher.Toreducetheriskofatornquiltincasetheneedle isstuck,Pro-Stitcheralsodisablesthemotors.

TopausequiltingOnoccasionyoumayneedtopausestitchingtomakefurtheradjustmentstosettings,toreplaceabobbin,orrethreadthemachine.YoucanchangeanyofthePro-Stitchersidebarsettingswhilethemachineispaused.However,afterpausingthemachine,otheroptionsarealsoavailable:stitch,reposition,status,andnewstart/end.

Pause:PressthePausebuttonforthemachinetocometoagentlestop.Pro-Stitcherplacesagoldmarkeratthepointinthedesignwhereyoupaused.Tomakechangestosettings,selectModifyandthenselectReposition,NewStart/End.

110|www.Janome.com

BeforeYouStitchtheDesignontheQuiltBeforestitchinganydesign,it’sagoodideatodoublecheckthepositionofthedesignrelativetothequilt.Inadditiontodoingamanualcheck,usethetwoTraceoptionstoverifythepositionofthedesign’sboundingboxorthedefinedarearelativetothequilt.Toverifythepositionofthedesign’sboundingboxonthequilt

TraceBounds:DisabletheStitchbutton.SelectTraceBoundsandthenRun.Pro-Stitchermovesthemachinearoundtheperimeterofthedesign,followingtheblueboundingbox.Watchtheneedlepositionasthemachinetracesthedesign’sboundingboxtoensurethedesignwillquiltwhereexpected.IftheStitchbuttonisenabled(appearsdarker),Pro-Stitcherstitches,ratherthantraces,theboundingbox.

Toverifythepositionofthedefinedareaonthequilt

TraceArea:DisabletheStitchbutton.SelectTraceAreaandthenRun.Pro-Stitchermovesthemachinearoundtheperimeterofthedefinedarea,shownaspurplelinesonthescreen.Watchtheneedlepositionasthemachinetracesthearea’sperimetertoensurethedesignwillquiltwhereexpected.IftheStitchbuttonisenabled(appearsdarker),Pro-Stitcherstitches,ratherthantraces,theperimeterofthearea.

MovetheQuiltingMachinewithPro-StitcherTheMovefunctionmovesthequiltingmachineinanyoftheeightdirectionsindicatedbytheon-screenarrows.Tochangethespeedatwhichthemachinemoves

• TapthePlusSign(+)toincreasethemovementspeed.TaptheMinusSign(–)todecreasethemovementspeed.Orselectthenumberboxandenteravalue(upto50)inthenumberpadthatappearsandthenpressEnter.

TomovethequiltingmachinefromwithinPro-Stitcher

• Pressandholdanarrowbutton.TheselectedarrowbuttonchangestoaStopbutton.Themachinemovesintheselecteddirectionuntilyoustoppressingthearrowkey.

Tostitchcontinuously

Continuous:Insteadofholdingyourfingeronthearrowkey,selectContinuous. Thenpress(andrelease)anarrowkey.TheselectedarrowbuttonchangestoaStopbutton.ThemachinemovesintheselecteddirectionuntilyoupresstheStopbutton.

TostitchastraightlineusingtheMovebuttons

Stitch:SelecttheStitchbutton.Pressandholdanarrowbutton.TheselectedarrowbuttonchangestoaStopbutton.Themachinestitchesalineintheselected directionuntilyoustoppressingthearrowkey.

112|www.Janome.com

Alternately,selectbothStitchandContinuous.Thenpress(andrelease)anarrowkey.TheselectedarrowbuttonchangestoaStopbutton.ThemachinestitchesintheselecteddirectionuntilyoupresstheStopbutton.

MachineQuiltingTip:Straight-linequilting

UsetheMoveandStitchoptionstostitchstraightlinesforstitch-in-the-ditch,piano-keyborders,andcross-hatching.Usethedownarrowwithstitchtobastedowntherightandleftsidesofthequilt.IfyoualsoselectContinuous,youwillbeabletousebothhandsonthequilttoensurethatthequilttopandedgeslayflatagainstthebatting.

Pro-StitcherasaHorizontalorVerticalChannelLock IfyouusethechannellockfeatureinPro-Stitcher,youwillbeabletostitchhorizontalandverticallinesthatareperfectlysquarewithPro-Stitcherandtheframe. Tostitchahorizontalorverticallinewiththechannellock

HorizontalChannelLock:SelectHorizontaltolockPro-Stitchersoitstitchesonlyinahorizontaldirection.PresstheStart/Stopbuttononthemachine’shandlebarsandmovethemachinetostitchthelineinaleft-to-rightorright-to-leftdirection.

VerticalChannelLock:SelectVerticaltolockPro-Stitchersoitstitchesonlyinaverticaldirection.PresstheStop/Startbuttononthemachine’shandlebarsandmovethemachinetostitchthelineinatop-to-bottomorbottom-to-topdirection.

• IMPORTANT:Ensurethatthecarriagemotorleversareintheengagedposition.

Youcanthenmanuallyusethequiltingmachinehandlestostitcheitherhorizontalorverticallines.

MachineQuiltingTip:TostitchaplumblinewithPro-Stitcher

Ensureyourquilttopisloadedsquarelyontheframebystitchingahorizontalplumblineacrossthetopofthebattingandbacking.SelectHorizontalChannelLock,presstheStart/Stopbuttononthemachine’shandlebars,andstitchaplumblineapproximatelyoneinchfromthetopofthequiltbackingandbatting.Thenalignthetopedgeofthequilttopwiththeplumblineandbasteclosetotheedgesothestitchingwillbecoveredbythequilt’sbinding.

• IMPORTANT:IfyouuseanHQSixteenwithPro-Stitcher,switchtomanualcontrol

beforeusingthehandlebars.

114|www.Janome.com

FreehandRecordPro-Stitchercanrecordthemovementofthequiltingmachine.Forexample,recordyourownall-overbackgrounddesignsacrossthewidthofthequilt.Orrecordyoursignaturesoyoucanquiltyoursignatureintoyourquilts.ThisscreenalsoenablesyoutoquicklyswitchfromusingPro-Stitchertofree-motionquilting.

• SelectPro-StitcherandthenRecord.

TheorangeGearsbuttonIndicatesthatthemotorsareengaged.Thisisthemodeyou'lluseformostcomputerizedquiltingwithPro-Stitcher.IfyouRecordwiththemotorsengaged,Pro-Stitcherrecordsbasedonthemotormovementsandtherewillbeaslightdragtothequiltingmachineasyoumoveit. Tomakeiteasiertomovethemachine,touchtheGearsbuttontorecordbasedonthequiltingmachine'sencoders.Ifyouhaveacarriagewithmanuallevers,you'llalsoneedtomanuallyraisetheleverstodisengagethemotors.Thebuttonimagechangestoindicatethatthemotorsaredisengaged.

Toswitchtofree-motionquiltingifyouhavetheEZ-Carriage

• SelectthePro-StitchertabandthentheGearsbuttontodisengagethemotors.Thebuttonchangestothepurplegearsimage.Youcannowfree-motionquiltasdesired.WhenyouarereadytoonceagainquiltwithPro-Stitcher,selecttheGearsbuttontoonceagainengagethemotors.

Recordthemovementsofyourfreehandquilting Torecordfreehandmotion

• SelectPro-StitcherTab>Record.SelecttheRecordbuttonintheRecordsidebar.Beginquiltingthedesignyouwanttorecord.Whencomplete,selecttheRecordbuttonagain.Savethedesigntothecomputer(selectSave,thenSelected).

MachineQuiltingTip:AddrecordedstitchingtoanexistingdesignLoadadesignandpositionthecrosshairswhereyouwanttobeginrecordingfreehandmotion.Astitchinglineconnectstheendpointofthedesignandthepositionofthecrosshairswhenrecordingbegins.

• NOTE:Whenaddingtoanexistingdesign,Pro-Stitcherbaselinestheoriginaldesignand

treatsitasasingledesignwhenperformingotherdesignfunctions. Tomarkandrecordstraightlines MarkissimilartoRecord,butinsteadofrecordingcontinuouslyasyoumovethemachine,itrecordsastraightlinebetweeneachmarkedpoint.

1. MovethequiltingmachinetothepointwhereyouwanttobeginastraightlineandselectMark.

2. MovethemachinetowhereyouwanttoendthestraightlineandagainselectMark.

Continuemarkingalongtheline,stitchtheline,orsaveitasadesignforfutureuse. MachineQuiltingTip:Recordstitch-in-the-ditchquiltinglines

MovethequiltingmachinetothebeginningofthequiltditchandselectMarktorecordthefirstpointoftheline.ThenmovethemachinetoanotherpointfurtherdowntheditchandpressMarkagain.Continuemarkingpointsalongtheditchtorecordstraightlinesbetweeneachmarkedpoint.Themarkedditchdesigncanthenbestitchedorsavedtostitchatdifferentplacesonthequilt.

Toaddjumpstoyourrecordeddesign Atanypointwhilerecordingormarking,insertajumppointintoyourdesign.

• Stoprecordingormarking,andthenselectJump.Continuemovingthemachine,butnostitchlineswillberecordeduntilyouonceagainselectRecordorMark.Jumplinesdisplayasdottedlines.

• NOTE:MakesuretheAutoRotatefunctiononthetabletcomputeristurnedoff.This

ensuresthatthescreenfunctionsproperlyasyourecordthefreehandmotions.

116|www.Janome.com

ChangetheStitchingStartorEndPointofaDesignAfterthethreadbreaksorthebobbinrunsoutofthread,youmayneedtostartquiltingfromapointotherthanthedesign’sstartpoint.Similarly,youmaywanttochangetheendpointtoapointotherthanthedesign’soriginalendpointandquiltonlyapartofthedesign.

Tobeginquiltingfromapointotherthanthedesign’sstartpoint

• PositiontheneedlewhereyouwanttobeginstitchingandselectStartAuto.Thepointinthedesignthatisclosesttothecrosshairswillbethenewstartpoint.Alternately,dragtheleftscrollbartomovethestartpointtoanewpositioninthedesign.

Toendquiltingatapointotherthanthedesign’sendpoint

• PositiontheneedlewhereyouwanttoendstitchingandselectStopAuto.Thepointinthedesignthatisclosesttothecrosshairswillbethenewendpoint.Alternately,dragtherightscrollbartomovetheendpointtoanewpositioninthedesign.

• NOTE:Ifyouselectastartpointthatisbeyondthecurrentendpointinthedesign,theendpointisadjustedtofollowthestartpoint.Similarly,ifyouselectanendpointthatisbeforethecurrentstartpointinthedesign,thestartpointisadjustedtocomebeforetheendpoint.

• NOTE:IftheStartAutoorStopAutobuttonsareselected,thestartorendpointscontinuetomoveasyoumovethemachineandcrosshairs.SelectStartAutoagainwhenthestartpointiswhereyouwantit.

Toadjuststartandendpointswiththescrollbars

Theleftscrollbarcontrolsthestartpointandtherightscrollbarcontrolstheendpoint.

• Usethesingleupanddownarrowsaboveandbelowthescrollbarstofinetunetheselectiontopreciselypositionthenewstartorendpoint.

Tosetastartorendpointtoajumppointinthedesign

• Fordesignsthathavemultiplejumppoints,pressoneofthedoublearrowsbelowJumpstomoveeitherthestartorendpointtothenextjumppointinthedesign.

MachineQuiltingTip:Recoveringfromathreadbreakorbobbinchange

Ifthethreadbreakswhilestitching,pressPause.Fixtheproblembyrethreadingthemachineorchangingthebobbin.SelectthePro-StitchertabandthenselecttheNewStart/Endbutton.ThenpresstheStartAutobutton.PressUnlockMotors.Movethemachine’sneedletotheplaceonthequiltwhereyouwanttobeginstitchingagain.Thecrosshairsonthescreenwillmovetothecorrespondingpositiononthedesign.Ifsomefinetuningisneededtomovethenewstartingpointforwardorbackinthedesign,usetheupordownarrowsonthescrollbaruntilthenewstartpointisexactlywheredesired.PressStartAutoagain.Pullupyourbobbinthreadandtieoffbeforeresumingunlessyoursettingsareconfiguredtoautomaticallypullupandtieoff.PressResumetocontinuequilting.

Ifthequilthasshiftedslightlyandthepointonthedesigndoesnotmatchupexactlywiththepointonthequilt,movetheneedletotheexactlocationonthequiltthatmatchesthenewstartingpointthatwasjustset.ThenselectModify>RepositionandusetheNudgefunctionwithasmallvalue(suchas0.1)topositiontheneedleatthecorrectstartingposition..DoublechecktheTieOffandPullupsettingsandpressResumetocontinuestitchingthedesign.

118|www.Janome.com

ViewTabTheoptionsontheViewtabenableyoutospecifywhichelementsdisplayontheworkspace.AnyofthesebuttonsmaybeaddedtotheQuick-Accesstoolbartoeasilytogglebetweenshowingtheelementorturningitofffromview. TocustomizetheQuick-AccessToolbarViewtabribbonbuttons

Rulers:Selecttohideorshowtheworkspacetopandsiderulers.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonorofftherulers.

Grid:Selecttohideorshowtheworkspacegrid.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonorofftheworkspacegrid.

Scroll:Selecttohideorshowthebottomandright-sidescrollbarsintheworkspace.Usethescrollbarstopanupanddownorleftandright.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonoroffthescrollbars.

Transparency:SelecttohideorshowtheworkspacelightlybelowPro-Stitcherscreenareasbeyondthemainworkspace,suchasbelowtheribbonbuttons,thesidebar,thestatusbar,andthetoolbars.

Design:Selecttohideorshowthedesignfromtheworkspace.ThisbuttonmaybeaddedtotheQuick-Accesstoolbar.

Bounds:Selecttohideorshowtheboundingboxaroundtheselecteddesign(s).ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonorofftheboundingbox.

Area:Selecttohideorshowtheareabox.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyswitchbetweenshowingtheareaboxorremovingitfromview.

RubberBand:Selecttohideorshowtherubberbandaroundtheselecteddesign(s).Therubberbandshowsthesmallestamountarearequiredbytheentiredesign.

Jumps:Selecttohideorshowthestitchingpathbetweenjumppoints,orplaceswhereyouneedtostopstitching,tieoffyourthread,andthencontinuestitchingatthenextstartpoint.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonoroffthestitchingpath(s).

StartEnd:Selecttohideorshowthequiltingstartandendpointsinadesign.ThisbuttonmaybeaddedtotheQuick-Accesstoolbartoquicklyturnonoroffthestartandendpoints.

120|www.Janome.com

Topassadesign

ToolsTabRibbonButtons

Art&Stitch:Selecttopasstheselecteddesign(s)toArt&Stitch,selecttheToolstabandthenselecttheArt&Stitchbutton.IfArt&Stitchisopenandhasbeenlicensed,thedesignwillopeninArt&Stitch.IfArt&Stitchhasnotyetbeenlicensed,alicensingscreenwillappearforenteringlicenseinformation.

Art&Stitchiscomprehensivequilting-designsoftwareforcreatingandmodifyingquiltingdesigns.ItisincludedwithPro-Stitcher. Pro-StitchercanpassdesignsquicklyandeasilyintoArt&StitchsoyoucanuseanyoftheArt&Stitchtoolstomodifythedesignhowevernecessary.Art&StitchautomaticallyloadsandrunsinthebackgroundwhenPro-Stitcherstarts,sopassingfilesfromHQPro-StitchertoArt&Stitchhappensveryquickly. TopassadesigntoArt&Stitch

1. SelectTools,andthenArt&Stitch.PressOpenscreentoopentheArt&Stitchsoftware.IfArt&Stitchisopenandhasbeenlicensed,thedesignwillopeninArt&Stitch.

• NOTE:IfArt&Stitchhasnotyetbeenlicensed,alicensingscreenwillappearforenteringlicenseinformation.YouwillnotbeabletosaveanychangestothedesignuntilyouactivatetheArt&Stitchlicense.FollowtheinstructionsintheArt&Stitchinstructionmanualforoff-lineactivation.

122|www.Janome.com

2. PressClosetobypassregistrationandopenthedesign. WhenthedesignispassedintoArt&Stitch,thepositioninformationismaintained;aslongasthedesignisnotmovedinArt&Stitch,itwillbeinthesamelocationwhenitispassedbacktoPro-Stitcher. PassthemodifieddesignbacktoPro-StitcherbypressingthePro-StitcherbuttonontheArt&Stitchtoolbarontheleft-handsideoftheArt&Stitchscreen.

• CAUTION:IfadesignisopenedinArt&StitchwithoutusingthePro-Stitchersoftware

andthePro-StitcherbuttonispressedtopassthedesignintoPro-Stitcher,thedesignwillbesavedinitscurrentstatewiththesamenameithadwhenitwasopened.Thiscouldleadtounintentionallywritingoveradesign.Toavoidthis,alwayssavethedesignwithanewworkingnamewhenitisdirectlyloadedinArt&Stitch.

LicensingWhenusingArt&Stitchforthefirsttime,thequiltermustentersomeinformationtoactivatethelicense.RefertotheinstructionsintheArt&Stitchsoftwareboxforoff-lineactivation.AllnetworkconnectionshaveintentionallybeendisabledonthePro-StitchercomputertopreventthecomputerfromdownloadingupdatesorvirusesthatwouldadverselyaffecttheperformanceofPro-Stitcher.

UsingaMouseoraKeyboard

ManyfunctionsinArt&Stitcharemuchsimplerwhenusingamouseandkeyboard.

Toopenorclosethepop-upkeyboardTouchthegraybarintheupper-leftcornerofthescreentoopenthepop-upkeyboard.ClosethekeyboardbytouchingtheXintheupper-rightcornerofthekeyboard.Whenusingthepop-upkeyboard,itmaybenecessarytopressanareaonthescreenwherethetextistobeenteredbeforetypingonthekeyboard.Whilethepop-upkeyboardisaquickkeyboardsolution,youcanalsouseaconventionalmouseandkeyboard.ThePro-StitchercomputerworkswithmostwiredandwirelessUSBkeyboardsandmice.Justplugthekeyboard,mouse,orwirelessdongleintoanavailableUSBport,waitaminuteforWindowstoinstallappropriatedrivers,andthenusethekeyboardormouse.AUSBhubmaybeusedtoexpandthenumberofavailableUSBports.Keyboards,mice,andUSBhubscanbepurchasedfrommostelectronicsretailers.UpdatingArt&StitchArt&StitchmayneedtobeupdatedtothelatestversionforPro-Stitchertoproperlypassdesignsbackandforth.Todownloadthelatestversion,useacomputerthatisconnectedtotheInternetandgototheJanomewebsite:(www.Janome.com).

124|www.Janome.com

ToupdateArt&Stitch

1. OntheJanomewebsite(www.Janome.com),selectDownloadsandthenPro-StitcherSoftwareUpdate.FollowtheinstructionstodownloadthelatestversionofArt&StitchforPro-Stitcher.Afterdownloadingthisinstallationfile,copyittoaUSBflashdriveandplugitintothePro-Stitchercomputer.

2. Waitapproximately10secondsforthePro-StitchercomputertosetuptheUSBflashdrive.ThenselectDesign,File,andpressUpdate.

3. BrowsetotheappropriatefolderontheUSBflashdriveanddouble-taptheArt&Stitchinstallationfile.ThePro-Stitchersoftwarewillcloseandtheinstallationwillbegin.

• NOTE:ToaccessthefilebrowserafterthePro-Stitchersoftwareisclosed,eitherattachakeyboardorpressthekeyboardiconatthetopleft-handcornerofthescreentoopenthepop-upkeyboard.PressandholdtheWindowskeyfollowedbytheletterEtoopenafilebrowsertolocateandthenruntheArt&Stitchinstallationfileagain.

4. AfterthenewversionofArt&Stitchisinstalled,restartthePro-StitchercomputerusingtheWindowsStartmenufromthebottomofthecomputerscreen.SelecteitherShutDownorRestarttoshutthecomputerdownandrestart.

SettingsTabUsetheSettingstaboptionstoestablishyourpreferencesanddefaultsforPro-Stitcher.SettingsTabRibbonButtons

Display:SelecttoturnonoroffTouchMode,customizetheQuick-AccessToolbar,andconfigurePro-Stitchersoitworksbestwithyourtabletcomputer.

Defaults:SelecttosettheNudgeincrementandAutoJumpthresholddefaults.

Speed:SelecttocontrolhowfastthePro-Stitchercarriagewillmovethroughthequiltingdesign.Becausethequiltingmachineregulatesitsownspeedtomaintainaspecificstitches-per-inchsetting,thespeeddoesnotdirectlysettheneedlespeed.Insteaditsetshowfastthemachinemovesacrosstheframesystem.

AutoJump:SelecttotemporarilyoverridetheAutoJumpdefault.TouchthePlusSign(+)toincreaseorMinusSign(–)todecreasethedistancethemachinewillautomaticallyjumpbetweenstartandstoppoints.Alternately,touchthenumberboxandtypeavaluedirectlyandpressEnter.

StitchesperInch:Selecttosetthestitchesperinch.TouchthePlusSign(+)toincreaseorMinusSign(–)todecreasethestitchesperinch.Alternately,touchthenumberboxandtypeavaluedirectlyandpressEnter.

Tieoffs:SelecttospecifyyourpreferredmethodforhowandwhenPro-Stitcherperformstie-offs.

Pullup:SelecttospecifyyourpreferredmethodforhowPro-Stitcherperformspullups.

PauseDelay:SelecttospecifyyourpreferencesforhowPro-Stitcherpausesforyoutocompleteapullup.

126|www.Janome.com

Advanced:SettingsthatarenotlikelytobeusedoftencanbefoundbyselectingtheAdvancedbutton.SomeofthesesettingsincludecommunicationsbetweenthequiltingmachineandthePro-Stitcher,Simulationmode,andotheroptions.

CutThread:Selecttohaveyourmachineuseitsbuilt-inbobbinthreadcutter.(AvailablefortheHQInfinityonly.)

TouchModeTouchmodeenlargestheuserinterfaceitems,suchasbuttons--makingiteasiertouseyourfingertointeractwiththesoftware.Touchmodealsomakesroomtoshowthenamebelowthetoolbarbuttons.MoretoolsfitontheQuick-AccesstoolbarwhenTouchmodeisturnedoff.

Quick-accesstoolsinTouchmode:

Quick-accesstoolswithTouchmodeturnedoff:

ToturnTouchModeonoroff

1. SelecttheSettingstabandthenselecttheDisplayribbonbutton.

2. IntheDisplaysidebar,selecttheTouchbuttontotoggleTouchmodeonoroff.Whenthebuttonisdarkgreen,Touchmodeison.

128|www.Janome.com

ToCustomizetheQuick-AccessToolbarYoucancustomizetheQuick-AccessToolbartocontainthebuttonsforthefunctionsyoumostoftenuse.

1. SelecttheSettingstab;thenselecttheDisplaybutton.

2. TouchtheAssignbuttonintheDisplaysidebar.ThisputstheQuick-AccessToolbarintoAssignmode.

3. Findeitheranopenpositiononthetoolbaroridentifyabuttonthatyouwanttoreplace;touchtherightarrowforthatbutton.Alistofavailablebuttonsappearstotherightofthetoolbar.

4. SelectthetoolyouwanttoaddtotheQuick-AccessToolbar.

5. ContinueaddingtoolsorexitbyselectingtheAssignbuttonagain.

Pro-StitcherDefaultsNudgeDefaultThisvaluecontrolsthedefaultNudgedistanceusedwhenRepositioningadesign(ModifyTab>Reposition).YoucanalwaysoverridethedefaultontheRepositionsidebar.TosettheNudgedefault

• TouchtheNudgenumberboxandusethepop-upnumberpadtoenterthedistance(ininches)forthedefaultnudgeamountforrepositioningdesigns.ThentouchEnter.Youcanenterdistancesinsmallincrements,suchas.01forahundredthofaninch.ThisisthevaluePro-StitcherusesunlessyoutemporarilyoverrideitontheRepositionsidebar.

ControlHowPro-StitcherHandlesJumps Ifaquiltdesigncontainsjumps,orgaps,inthedesignpaththatarenotstitched,Pro-Stitchercaneithermoveautomaticallywithoutstitchingthroughthejumppointandbeginstitchingattheendofthejump,oritcanpausebeforethejumpsoyoucantrimthethreadbeforeitmovestothenextstartingpoint. MachineQuiltingTip:Avoidlongjumps

Thelongerthejump,themorelikelythethreadwillbreakorthequiltwillgatherorbecomedistortedasthemachinepullsthethreadtothenextstartpoint.SetanAutoJumpthresholdthatisanappropriatenumberofinchessobothyourquiltandquiltingremainssmooth.

130|www.Janome.com

1. SelecttheSettingstab;thenselecttheDefaultsbutton.

2. IntheDefaultssidebar,specifythethreshold(ininches)atwhichPro-StitchershouldpauseforyoutotieoffyourstitchingbeforemakingthejumpbytouchingtheAutoJumpnumberboxandenteringthenumberofinchesusingthepop-upnumberpad.ThenselecttheEnterbutton..

• NOTE:IfthejumpdistanceinthedesignislessthantheAutoJumpthreshold(number

ofinchesenteredintheAutoJumpbox),Pro-Stitcherdoesnotpauseforyoutotrimthethreadbeforejumpingtothenextstartpoint.IfthejumpislongerthantheAutoJumpthreshold,Pro-Stitcherpausesbeforethejumpsoyoucantrimthethread.

• NOTE:IfTieoffoptionsareturnedon,Pro-Stitcherperformsatieoffatthejumpstart

andendpoints,regardlessofwhichjumpmethodisperformed.IfthePullupfeatureisturnedon,Pro-StitcherperformsapullupattheendofthejumpsthatexceedtheAutoJumpthreshold.

AutoJumpIfaquiltdesigncontainsjumps,orgapsinthedesignpaththatarenotstitched,Pro-Stitcherhandlesthosejumpsinoneoftwoways.Itcaneithermoveautomaticallywithoutstitchingthroughthejumppointandbeginstitchingattheendofthejumpwithnouserintervention oritcanpausebeforethejumpsoyoucantrimthethreadbeforeitmovestothenext startingpoint. MachineQuiltingTip:AvoidLongJumps

Thelongerthejump,themorelikelythethreadwillbreakorthequiltwillgatherorbecomedistortedasthemachinepullsthethreadtothenextstartpoint.ThisiswheretheAutoJumpthresholdisuseful.

IfajumpislessthantheAutoJumpthreshold,ornumberofinchesenteredintheAutoJumpbox,Pro-Stitcherwillnotpauseforyoutotrimthethreadbeforejumpingtothenextstartpoint.IfthejumpislongerthantheAutoJumpthreshold,Pro-Stitcherwillpausebeforethejumpsoyoumaytrimthethread. ThedefaultAutoJumpthresholdissetontheDefaultssidebar(SettingsTab>Defaults).However,youcantemporarilychangethatthresholdontheAutoJumpsidebar(SettingsTab>AutoJump).TotemporarilychangetheAutoJumpthreshold

1. OpentheAutoJumpsidebar(SettingsTab>AutoJump).

5. Touchthenumberboxandusethepop-upnumberpadtoenterthenewAutoJumpthresholdininches.ThenpressEnter.Alternately,pressthePlusSign(+)toincreaseorMinusSign(–)todecreasetheAutoJumpthresholdby.5inch.

• NOTE:IfTieoffoptionsareturnedon,Pro-Stitcherperformsatieoffatthejumpstartandendpoints,regardlessofwhichjumpmethodisperformed.IfthePullupfeatureisturnedon,Pro-StitcherperformsapullupattheendofthejumpsthatexceedtheAutoJumpthreshold.

132|www.Janome.com

StitchingSpeedTheSpeedsettingsetshowfastthePro-Stitchercarriagewillmovethroughthequiltingdesign.Becausethequiltingmachineregulatesitsownspeedtomaintainaspecificstitches-per-inchsetting,thespeeddoesnotdirectlysettheneedlespeed.Insteaditsetshowfastthemachinemovesacrosstheframesystem. Tosetthestitchingspeed

1. SelecttheSettingstab;thenselecttheSpeedbutton.

2. ChooseeithertheSlow(snailicon),Medium(rabbiticon),orFast(birdicon)buttontosetthedefaultspeed. Slowsetsthespeedto20%oftheSpeedProfile(Settings>Advanced>SpeedProfile).Mediumsetsthespeedto60%oftheSpeedProfile.Fastsetsthespeedto100%oftheSpeedProfile.Alternately,usethescrollbartoselectaspeedbetweentheslow,medium,andfastsettings.

StitchesPerInch Tocontrolthenumberofstitchesperinch

1. SelecttheSettingstab;thenselecttheStitchesPerInchbutton.

2. IntheStitchesPerInchsidebar,touchthePlusSign(+)toincreaseorMinusSign(–)todecreasethestitchesperinch.Alternately,touchthenumberboxandtypeavaluedirectlyandpressEnter.

134|www.Janome.com

Tie-OffStitchesBytyingoffatthebeginningandendingofstitching,thestitcheswillbesecureandwillnotcomeundone.Thetie-offfeatureenablesyoutoselectyourpreferredmethodforhowandwhenPro-Stitcherperformstieoffs.

1. SelecttheSettingstab;thenselecttheTieoffsbutton.

2. PresstheTieoff#PlusSign(+)toincreaseorMinusSign(–)todecreasethenumberoftie-offstitchesPro-Stitcherperforms.Alternately,touchthenumberboxandspecifyavaluedirectlyusingthepop-upnumberpadandtouchEnter.

• NOTE:Thenumberyouspecifyisthenumberoffullstitchesthatareformed,notthenumberoftimestheneedlescycles.Forexample,ifthetie-offnumberissetto2andyouselectedtheMicromethod,theneedlecyclesthreetimesbeforebeginningtostitchthedesign.Alternately,ifyouselectedtheTackmethod,theneedlecyclesfivetimestoformtwostitchesforwardandtwostitchesback.

3. PresstheDistancePlusSign(+)toincreaseorMinusSign(–)todecreasethedistanceininchesforeachtie-offstitch.Alternately,touchthenumberboxandspecifyavaluedirectlyusingthepop-upnumberpadandtouchEnter.

4. TohavePro-Stitcherperformatieoffatthebeginningofstitching,selecttheStartbutton.

5. TohavePro-Stitcherperformatie-offstitchattheendofstitching,selecttheEndbutton.

Toselectthemethodoftie-offstitch:MicroorTack

• PressTacktoselecttheTackmethodoftieoff.TheTackmethodformstheselectednumberofstitchesforwardintothedesignandthenbacktothestartpointbeforebeginningtostitchthedesign,thusdoublingthenumberofstitchesselected.

• PressMicrotoselecttheMicromethodoftieoff.TheMicromethodformsthesetnumberofstitchesforwardintothedesignandthenbeginsstitchingfromthere.Pro-Stitcherstopsstitchingjustbeforetheendpointandperformstheselectednumberoftieoffstotheendofthedesign.ItislessnoticeablethantheTackmethodbecausethereisnobuild-upofthread.

136|www.Janome.com

Pull-upStitchesPro-Stitchercanbesettotakeapull-upstitchwhenitbeginsstitchingadesign.Itmovestheneedletothestartpointofthedesign,takesastitch,andthenshiftsasideforyoutograspthetopandbobbinthread.Alternately,itcantakeastitchanddisablethemotorssoyoucanmanuallymovethemachineasidetopullupthebobbinthread.ControlhowPro-Stitcherhandlesbobbin-threadpullups

• SelectSettingsTab>PulluptoopenthePullupsidebar. Toturnonbobbin-threadpullups

PullupOn:PressPullupOnforPro-StitchertoperformapullupatthebeginningofthedesignandatthebeginningofeachsegmentfollowingajumpthatexceedstheAutoJumpthreshold.

Toturnonautomaticbobbin-threadpullups

PullupAuto:PressPullupAutoforPro-Stitchertoshiftthequiltingmachinetotherightaninchafterpullingupthebobbinthreadsoyoucangraspboththreads.PressResumetocontinuequiltingthedesign.

• NOTE:IfPullupAutoisnotselected,butPullupOnisselected,thequiltingmachine

willtakeastitchatthestartpointandthendisablethemotors.Thisenablesyoutomanuallypushthequiltingmachineasidetopullupthebobbinthread.PressResumeforthemachinetomovebackintopositionandresumequilting.

PauseDelayControlthedelayfollowingabobbin-threadpullup ThePauseDelayfeaturepausesthequiltingmachineshortlyafterstartingintoadesignandaftereachtimeapullupisperformed.Thisenablesyoutosafelytrimthethreadtails.

• SelectSettingsTab>PauseDelaytoopenthePauseDelaysidebar. TosetthePauseDelay

PauseDelayOn:SelectOntoturnonPauseDelay;thebuttonwillbedarkgreen.Touchitagaintoturnitoff.

YouhavetheoptionofsettingthePauseDelayinseconds(howlongofadelay)orinches(howfaritstitchesbeforepausing).TosetPauseDelayinseconds

Seconds:SelectSecondsandthenpressthePlusSign(+)toincreaseorMinusSign(–)todecreasethenumberofsecondsforthepause.Pro-Stitcherwillpausethenumberofsecondsindicatedsoyoucantrimthreadtailsandthenresumestitching.

TosetPauseDelayininches

Inches:SelectInchesandthenpressPlusSign(+)toincreaseorMinusSign(–)todecreasethenumberofinchesPro-Stitcherstitchesbeforepausing.PressResumeaftertrimmingthreadtailstocontinuestitching.

138|www.Janome.com

AdvancedSettingsGeneral Toverifysettingsbeforequilting

PresstheVerifySettingsBeforeQuiltbuttontohavePro-Stitcherdisplayapop-upboxwithallofthecurrentsettings.Thisgivesyoutheopportunitytoverifythateverythingissetupproperlybeforestitching.Ifyoudon’twanttoseethisbox,disablethebutton.

SimulationMode YoucancreateasimulationversionofPro-StitcherwhichenablesyoutousethePro-StitchersoftwareinsimulationmodeonanycomputerrunningMicrosoftWindows7orlater.ItalsorunsonthePro-Stitchertabletitselfwhennotattachedtothequiltingmachine.UsingasimulationlicenseenablesyoutotakethetabletcomputeroranotebookcomputertoPro-Stitchertrainingandusethesoftwarefunctionseventhoughthecomputerisn’tattachedtoaquiltingmachine.TousethePro-StitcherSimulationModeIfrunningthesimulationmodeonthePro-Stitchertabletcomputer,youmayswitchbetweensimulationmodeandregularmode.However,whenrunningPro-StitcheronastandaloneWindowscomputer,itonlyrunsinsimulationmode.

TotogglebetweenrunningPro-StitcherinsimulationmodeonthePro-Stitchertabletcomputer,selecttheSimulationOn/Offbutton.WhenyouactivateSimulationmode,theSimulatebuttonappearsintheWorkspaceToolbar.

TorunPro-StitchersimulationmodeontheWindowscomputer,simplystartPro-Stitcherafterinstallationandcreatingasimulationlicense.WhentheSimulatebuttonisselected,themouseandthekeyboardarrowkeyssimulatemovingthequiltingmachinetodothingssuchaszoom,pan,orcreateareas. TocreateaSimulationLicense

1. DownloadthelatestversionofthePro-Stitchersoftware,forexamplePSUpdate17.01.0001.exe,toaUSBflashdrive.

• IMPORTANT:Ifthisversionisn’talreadyinstalledonyourPro-Stitchertablet,

installitbyinsertingtheUSBflashdriveintothetabletcomputer.AfterthetabletcomputeraccessestheUSBdrive,followinstructionsonthescreenforcontinuingtheinstallation.

2. StartPro-Stitcherandensurethatitconnectswiththecarriagemotors.

NOTE:IfyouwillberunningPro-StitcherinsimulationmodefromthePro-Stitchertabletcomputer,installationiscomplete.IfyouwillberunningPro-Stitcherinsimulationmodeonadifferentcomputer,suchasaWindowslaptopcomputer,continuewiththeremainingsteps.

• IMPORTANT:YoumusthaveadministratorrightsfortheWindowscomputer

140|www.Janome.com

youwilluseforthePro-Stitchersimulation.

3. InserttheUSBflashdriveintoaUSBportontheWindowscomputeryouwilluseforsimulationmode.ViewthefilesontheUSBdrive.Right-clickthePro-Stitcherexecutablefile(PSUpdate17.01.0001.exe,inthisexample)andselectRunasadministrator.Pro-StitcherwillinstallontotheWindowscomputerandthenstart.

4. Youwillseeapop-upmessage

askingwhetheryouwanttobeabletorunPro-Stitcherinsimulationmode.SelectYes.IfyouselectNo,Pro-Stitcherwillnotrun.

5. Whenyoureceivethismessage,donotyetselectOK.

6. RemovetheUSBdrivefromtheWindowscomputerandinsertitintothePro-Stitchertabletcomputerthatisattachedtothequiltingmachine’scarriage.

7. OnthePro-Stitchertablet,selectSettings>Advanced>General.ThenselectCreateSimulationLicense.

8. WhenyoureceivethemessageLicensefilewritten,selectOK.RemovetheUSBdrive.

9. ReturntotheWindowscomputeryouwilluseforsimulationmodeandinserttheUSBdrivebackintotheUSBportoftheWindowscomputer.NowselectOK.

10. YoucannowrunPro-StitcherinsimulationmodeontheWindowscomputer.

142|www.Janome.com

CommunicationsTheCommunicationoptionsenableyoutomanuallyestablishcommunicationswitheitherthequiltingmachineorthePro-Stitchermotors.ChoosetheSettingstab;thenchooseAdvanced>Communications.

Pro-Stitcher:Whennotselected,thisbuttonstopscommunicationsbetweenPro-Stitcherandthequiltingmachine.Itshouldalwaysbeenabled(darkgreen)whenusingPro-Stitcher.

ToreconnectmotorsIfthePro-Stitchermotorseverbecomeunpluggedordisconnectedfromthecomputer,itmaybenecessarytoreestablishcommunicationsbetweenthePro-Stitchercomputerandthemotors.

MotorError:IfthePro-Stitchercomputercannotcommunicatewiththemotorsforanyreason,itwillbeindicatedbyalightningbolticonatthetopright-handcornerofthescreen.

ReconnectMotors:PressReconnectMotorsortheMotorErrorbuttoninthetop-rightcornerofthescreentoreestablishcommunicationsbetweenthePro-Stitchercomputerandthemotors.

ToreconnectthemachineYoumayneedtoreestablishcommunicationsbetweenPro-Stitcherandthequiltingmachine.Forexample,thishappenswhenyoustartthePro-Stitchercomputerwhilethequiltingmachineisturnedoff.

ReconnectMachine:PressReconnectMachinetoreestablishcommunicationsbetweenthePro-Stitcherandthequiltingmachine.

• NOTE:EasilytestwhetherPro-Stitcheriscommunicatingwiththequiltingmachineby

pressingtheFullStitchbutton(Pro-Stitchertab>FullStitch),orlookingatthetouchscreenonthequiltingmachine’shandlebars.IfthereiscommunicationbetweenthequiltingmachineandPro-Stitcher,thequiltingmachine’stouchscreenwillindicateit.Iftheyareconnected,thequiltingmachinewillcycletheneedle.

Iftheyarenotcommunicating,nothingwillhappen.IfthePro-Stitchercomputercandetectthatitisnotcommunicatingwiththequiltingmachine,alightningbolticonwillappearinthetop-rightcornerofthePro-Stitcherscreen.PressingthatbuttonwillperformthesamefunctionastheReconnectMachinebutton.

144|www.Janome.com

SpeedProfileTheSpeedProfileenablesyoutocustomizetherelationshipbetweenquiltingspeedandtheprecisionneededtoquiltintricatedesigns.Tousethedefaultspeedprofile

DefaultMaximumAcceleration:SelectDefaulttoresetyourmachinetoitsdefault,orrecommended,accelerationspeed.

DefaultMaximumSpeed:SelectDefaulttoresetyourmachinetoitsdefaultmaximumspeed.

Tochangethemaximumacceleration

• Ifyouexperienceskippedstitchesorajerkymovement,youmaywanttospecifyaloweraccelerationvalue.Forveryintricatedesigns,youmayalsowantalowervalue.TouchthenumberboxforMaximumAccelerationandusethepop-upnumberpadtoenteranumericalvalue;thentouchEnter.

Tochangethemaximumspeed

• Ifyouexperiencelongstitches,youmaywanttospecifyalowermaximumspeedvalue.TouchthenumberboxforMaximumSpeedandusethepop-upnumberpadtoenteranumericalvalue;thentouchEnter.

LoggingTheloggingoptionsarefortroubleshootingPro-Stitcherbyatechnician.TurningonLoggingcreatesafileatechniciancanusefortroubleshooting.IfyourunPro-Stitcherwithloggingonforanextendedperiodoftime,itwilluseupalotofthediskspaceonyourtabletcomputerforthefile.

146|www.Janome.com

MotorsTheMotorTorqueLimitenablesyoutocustomizethesensitivityofthePro-Stitchermotors.Forexample,ifwhilequiltingthemachinehitsthepoles,thereisathreadlock,oryou’veselectedaquiltingspeedthatistoofastforthecomplexdesignyou’reusing,theerrormessageMotorError:ExcessiveMotorStrainDetectedappearsandthemotorsstop.Thissettingvariesthethresholdforstoppingthemotors.Mostwillnotneedtoadjustthisvalue. Thissettingvariesthethresholdforstoppingthemotors.Thedefaultis100.Mostwillnotneedtoadjustthisvalue.Generallyyouwillmakethisadjustmentwhenrecommendedbyatechnicianorifyourepeatedlyreceivethemotorerrormessagethatexcessivemotorstrainwasdetected. ToresettheMotorTorqueLimittothedefault

MotorTorqueLimitDefault:SelectDefaulttoresetyourmachinetoitsdefaultmotortorquelimit.

WhentoadjusttheMotorTorqueLimit Generallyyouwillmakethisadjustmentwhenrecommendedbyatechnicianorifyourepeatedlyreceivethemotorerrormessagethatexcessivemotorstrainwasdetected. Ifyoureceivethemotorstrainerrormessageduringnormalstitchingconditions:

1. Checkforandremoveanyobstructions. 2. CleartheerrormessagebytouchingtheXintheupper-rightcornerofthe

message.3. PressReconnectMotorsortheMotorErrorbuttoninthetop-rightcornerofthe

screentoreestablishcommunicationsbetweenthePro-Stitchercomputerandthemotors

4. Reduceyourquiltingspeedandresumequilting.5. Ifyoucontinuetoreceivetheerrormessage,changethespeedprofile(Settings

>Advanced>SpeedProfile). 6. Ifyoucontinuetoreceivethemotorstrainerrormessage,adjusttheMotor

TorqueLimit.

ToadjusttheMotorTorqueLimit

1. SelectSettingsTab>Advanced>Motors.2. IncreasetheMotorTorqueLimittolessenthemotorsensitivityordecreasetheMotor

TorqueLimittoincreasethemotorsensitivity.Selectthenumberboxandenterthevalue.Typicallyentering55or60issufficienttoeliminatetheerrormessageexceptwhenthereisasignificantobstruction.

• CAUTION:IncreasingtheMotorTorqueLimitmeansthatthePro-Stitchermotorswillbelessresponsivetoobstructionsandmaycontinuerunning,potentiallycausingdamagetothequilt.DecreasingtheMotorTorqueLimitmeansthatthePro-Stitchermotorswillstopmoreeasilywhenthereisresistance.

• IMPORTANT:DonotincreasetheMotorTorqueLimitabove100ordecreaseitbelow

148|www.Janome.com

2 2-Corner Areas, 35, 38

A Align Designs Within an Area, 45, 77 Align Triangle Designs, 77 Area tab, 35 Areas, 12, 15, 25, 35, 36

Area File Types, 15 Clear, 35, 36 Close, 12, 25, 35, 36 Create 2-Corner, 35, 38 Create Multi-Point, 35, 41 Cross Hairs, 85 Nudge, 85 Nudge Designs to Reposition, 85 Open, 12, 25, 35, 36 Reposition, 43 Resize, 38 Rotate, 43 Save, 12, 25, 35 Select, 35, 36 Sidebar, 38

Reposition, 43 Rotation, 43

Swap Design Start and End Points, 89 X-Form (Transform), 38

Rotate, 38 Zoom to Area, 36

B Baseline Designs, 45, 46

C Clear, 15

Clear All, 15, 27, 32 Clear All, 15, 32 Clear Area, 35 Clear History, 28 Close Edges, 57 Commonly Used Functions, 12 Concave Areas, 35, 73

Convex Areas, 35 Create Areas, 36, 38 Crop Based on New Start and/or End Points, 57 Crop Designs, 45, 57 Crop Inside, 57 Crop Outside, 57 Cut, copy or paste, 31

D Design Groups, 33 Design History, 28 Designers' Showcase, 19 Designs, 12, 19, 31

Close, 12, 19 Design File Types, 15 Duplicate, 27, 31, 137 Open, 12, 19 Save, 12, 19

Duplicate, 27, 137

E Edges, 57 Edit Tab, 27

Ribbon Buttons, 27 Encrypted Design files, 17 Exit Pro-Stitcher, 26

F File Tab, 15

Ribbon Buttons, 15 File Types, 15

.hqf, .hqfx, 15

.hqv, .hqvx, 15

.qli, .qlix, 15

.tap, .tapx, 15

.txt, .txtx, 15, 45

G Getting Started, 3 Groups, 33

H Help, 12 History, 27, 28

Clear History, 28 Horizontal Alignment, 77

150|www.Janome.com

L Lock Aspect Ratio, 64

M Moving the Machine with Pro-Stitcher, 111

Stitch Continuously, 111 Stitch While using Move, 111 Straight-Line Quilting, 111

Multi-Point Areas, 35, 41 Multi-Select, 5

O Online Resources, 3 Open Area files, 35 Open Edges, 57 Original Height, 64 Original Width, 64 Overview, 4

P Projects, 12, 15, 23

Close, 12, 23 Open, 12, 23 Project File Types, 15 Save, 12, 23

Pro-Stitcher Tab, 105 Channel Lock, 105, 113

Horizontal, 113 Vertial, 113

Clear Trace, 105 Follow, 105 Full Stitch, 105 Gears, 105 Half Stitch, 105 Measure, 105 Move, 105 New Start and End, 105, 116 Quilt, 105 Record, 105

Q Quick-Access Toolbar, 5 Quilt Sidebar, 107

Cut Thread, 107 Emergency Stop, 107

Pause Quilting, 107 Pull-up Auto, 107 Pull-up On, 107 Stitch, 107 Tie Off End, 107 Tie Off Start, 107 To begin Stitching, 107 Trace Area, 107, 110 Trace Bounds, 107, 110 Verify Settings, 107

R Reboot Pro-Stitcher, 26 Redo, 27, 30 Refresh, 5 Repeat Basic, 91, 92

Fit repeats, 92 Horizontal, 92 Modify Gap, 92 Point to Point, 92 Stretch repeats, 92 Vertical, 92

Repeat Wrap, 91, 99 Close Edges, 99 Drag, 99 Horizontal Wrap, 99 Point to Point, 99 Wrap Row, 99 Wrap Window, 99 Wrapping Sidebar, 99

Reposition Designs, 45, 85 Resize Designs, 45, 64 Ribbon, 5 Ribbon Buttons, 5 Rotate Areas, 43 Rotate Designs, 45, 47

S Select, 5 Select All, 5 Select None, 5 Settings, 138, 142, 144, 145, 146

Communications, 142 Reconnect Machine, 142 Reconnect Motors, 142

152|www.Janome.com

Logging, 145 Motor Torque Limit, 146 Simulation Mode, 142 Speed Profile, 144 Verify Settings Before Quilting, 138

Shut Down Pro-Stitcher, 15, 26 Skew 1, 73 Skew 2, 73 Skew Designs to an Area, 45, 73 Status Bar, 5 Stitching the Quilt, 107, 110 Stretch Designs, 77 Swap Design Start and End Points, 45

T Tabs, 5 Transform, 43

U Undo, 27, 30 Update Pro-Stitcher, 12, 15

V Vertical Alignment, 77

W Workspace, 5 Workspace tab, 33 Workspace Tabs, 5 Workspace Toolbar, 5 Wrapping, 91

X XForm, 43

Z Zoom, 5

www.janome.com

user reference guide - janome...pro-stitcher reference guide |7 grid: select to hide or show the...

Documents

grid iot reference design: connecting circuit breakers and

oracle enterprise grid reference architecture ...24...oracle...

usda national nutrient database for standard reference...

helaa bhs/1 reference number grid reference · helaa...

an easy reference for alv grid control

sas grid on power - reference architecture

a reference model for distribution grid control in the...

decision adopting metrics to measure the smart grid

sce-cisco-ibm smart grid reference...

2. measure theory - uab...

an easy reference for alv grid control - abap and hana...

sun's reference architecture for oracle's 11g grid

grid iot reference design: connecting fault indicators

how to take a grid reference? - magnificent meadows€¦ ·...

development of emt components and reference grid in

grid-connected solar microinverter reference design using a

using the national grid -...

usda nutrient database for standard reference, release ·...

the smart grid by siemens · smart grid: measure, analyze,...

an easy reference for alv grid control - abapinho