unk product specification

1

# 22, Street 242/107Sangkat Boeng Prolit. Khan 7 Makara

Phnom Penh, CambodiaTel: + 855 23 636 5555 ceo.unk@gmail.com

Product Specification

2

Himor is a cement admixture which is essential for any kind of cement work.

Himor has several unique strengths unlike any other product

HIMORIntroduction

3

Increasing workability up to 30% as blending with mortarVery economical for high adhesion enabling to protect

mortar loss.Increasing water retention and maintaining proper

viscosity to help workability and adhesion.Preventing, for high adhesion, breakaway between

concrete and decoration surface.Constraining moisture evaporation and curing the

concreted surface to protect contraction crackIncreasing mortar viscosity and adhesion.Promoting homogeneous dispersion of mortar-consisting

materials and preventing separation of those materials

Function and Effect

• Mix cement and Himor in the ratio of 1 to 2• Add water to adjust the viscosity• Pour the mixture in to the 3~ 5 liters of water• Thinly spread the finishing mortar and use brush

to even the surface• During the plastering process, mix a bag of

cement, a bag of Himor and water in the ratio Himor 1ea, cement 1ea and water.

• For general or masonry plaster work, and a quarter bag of Himor to the mixture of cement and sand

HOW TO USE? (General Usage)

4

5

Packaging 1 pack = 70g1 Box = 100 packs

6

Application

Concrete Wall Mortar

Masonry-plaster mortar

Repairing mortarSecondary cement-

base productsConcrete FloorReady Mixed

Concrete

7

ApplicationConcreting Wall

Mix Ratio : Cement 50kg + HI-

MOR 1/2 ~ 1 packUsage:

First blending:HIMOR with cement Add sandAnd then mixing with

water to make mortar

8

Application Masonry-plaster mortar

Mix Ratio : Cement 50kg + HI-

MOR 1 pack

Usage:First blending:

HIMOR with cement Add sandAnd then mixing

with water to make mortar

9

ApplicationConcreting Floor

Mix Ratio : Cement 50kg + HIMOR

1 pack

Usage:First blending:

HIMOR with cement Add sandAnd then mixing with

water to make mortar

10

ApplicationSmoothing Surface Concreting

Mix Ratio : Cement 50kg + HI-

MOR 1 pack

Usage:First blending:

HIMOR with cement And then mixing with

water to make mortar

11

ApplicationReady Mixed Concrete

Mix Ratio : Total amount of 1 Mixture-Truck of Concrete + 0.5% of HIMOR

Usage:First blending:

HIMOR with cement Add small stone + othersAnd then mixing with water to

make the concreteNote:

Recommended for a water construction project such as River Dam or River Bank, etc..

12

CautionAvoid moisture once opening the

packFirst blend with cement or mortar

and then pour waterDo not care to happen whitening(if

any), particularly under low temperature/high humidity

No problem in quality though whitening

Clean the working surface before using

Too much dosage could cause workability down and delayed hardening

13

Regina Silicon for Interior FinishingLuxury Interior finishes of residential space

and used space

REGINA SILICONIntroduction

14

Third molecular structure with excellent Anti-Bacterial effect coating method

Interior maximize the effect by using REGINA EFFECT PEARL PIGMENT

Metal, plastic, wood, glass and bonding a variety of materials without primer

Weather ability, chemical resistance and excellent Anti-Bacterial

Fast drying time(can be used approximately 3 hours after)

Mold free

Function and Effect

• Kitchen, bathroom, dedicated Luxury Interiors

• Finishing ceiling mold• Finishing joint• Finishing the door frame joint• Finishing metals, plastics, wood, glass and

etc.• Best use for wet environmental area

WHERE TO USE? (General Usage)

15

16

Packaging 1 bottle = 300ml1 Box = 25 bottles

17

Installation Picture

18

Installation Picture

19

Decorating the space with Regina PearlAdd a glittering touch to your space with the

most innovative grout, turning the application surface into a luxurious setting! It prevents moisture and salts from altering the space through time and offers impressive results, being the most glamorous choice you could make.

REGINA PEARL PIGMENTIntroduction

20

High resistance to abrasion and reduced absorption of water

Contains mold inhibitors for wet environmentExcellent water repellencyHigh durability against a number of acids,

alkalis, cleaning agents etc.Strong anti-bacterial actionSmooth final surfaceUnique color stability

Function and Effect

• Bathroom Floor & Wall Tile• Livingroom Floor & Wall Tile• Bedroom Floor & Wall Tile• Balcony Floor Tile

WHERE TO USE? (General Usage)

21

22

Packaging Sparkle Grout = 3kg(A= 1kg, B=2kg)Regina Pearl Pigment = 1 Bag(150g)

• STEP 1• Remove white cement from the grout

• STEP 2• Clean the empty grout

• STEP 3• Taping both side of grout with masking tape

• STEP 4• Mix Regina Pearl Pigment & Sparkle Grout

• STEP 5• Install Sparkle Grout into empty grout

• STEP 6• Cleaning

HOW TO APPLY? (General Usage)

23

24

Installation Picture

25

Installation Picture