understand the manufacture of sulphuric acid (1)
Post on 09-Apr-2018
216 Views
Preview:
TRANSCRIPT
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
1/22
Understand the manufacture of sulphuric acid
Synthesise the manufacture of ammonia and its salts
To understand alloys
Evaluate the uses of synthetic polymere
Apply the uses of glass and ceramics
Evaluate the uses of composite materials
Appreciate various synthetic industrial materials
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
2/22
USES OF AMMONIA IN DAILY LIFE
Fertilizers
Dry cell batteries
Refrigerant
Cleaning products
Nylons
Explosives
PROPERTIES OF AMMONIA
Colourless gas
Pungent smell
Very soluble in water
Alkaline
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
3/22
MANUFACTURE OF AMMONIA
Ammonia is produced industrially by a process called Haber Bosch process.
1.Nitrogen gas is obtained from the frictional distillation of liquid air.
2.Hydrogen gas is obtained from natural gas reacts with steam according to the following
equations.
3.Nitrogen and hydrogen are mixed according to the following ratio 1 mole N :3 moles H .
4.In the compressor,the gas mixture is heated to 450 C and 200 atm before it enters the reactor
chamber.
5.In the reactor chamber,am iron catalyst helps to speed up the reaction.
6.The gases emerging from the reactor is cooled.Ammonia liquefies.The liquid ammonia is
separated.
The unreactor nitrogen and hydrogen are returned to the reactor via the compressor.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
4/22
PREPARATION OF AMMONIA FERTILISERS.
Ammonia fertilizers are one of the chemical fertilizers added to soil to replace the nitrogen
element used up by the plants.
Examples of ammonia fertitlisers
Ammonium sulphate
Ammonium nitrate
Ammonium phosphate
Ammonium sulphtae fertilizer can be prepared in laboratory neutralization reaction between
ammonia solution and sulphuric acid.
EXPEIMENT
Aim: To prepare ammonium sulphate salt.
Apparatus and materials:
25 cm pipette,burette,250 cm conical flask,white tile,retort stand and clamp,evaporating
dish,filter tunnel,Bunsen burner,tripod stand,wire gauze,beaker,phenolphthalein solution.2.0 mol
dm ammonia solution,1.0 mol dm sulphuric acid and filter paper.
Procedure:
A.Determining the volume of sulphuric acid needed to neutralize as cm of 2.0 mol dm ammonia
solutiom.
1.25 cm of 2.0 mol dm ammonia solution is pipette to a conical flask.
2.2 or 3 drops of phenolphthalein solution are added to the alkali.
3.A burette is filled with 1.0 mol dm sulphuric acid and the initial burette reading is recorded.
4.The acid id dropped to the conical flask,At the same time,the conical flask is swirled gently.
5.The addition of acid is continued until the indicator change from pink to colorless.The final
burette reading is recorded.
6.The volume of sulphuric acid needed to completely neutralize the 25 cm of 2.0 mol dm
Ammonia solution is determined.(Assume the volume of the acid is Vcm )
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
5/22
B.PREPARING THE AMMONIUM SULPHATE SALT.
1.25 cm of 2.0 mol dm ammonia solution is added to the conical flask.
2.From the burette ,V cm of sulphuric acid is then added to the conical flask.
3.The mixture is shaken and paused into an evaporating dish.
4.The solution is evaporated through heating until a saturated solution is produced.
5.The saturated solution is then cooled to room temperature for crystalallisation.
6.The contents are3 filtered.The white crystals of ammonium sulphate are rinsed of with a small
amount of distilled water.
Preparing the Ammonium Sulphate Salt.
Observations:
1.At the end point,the pink colour of phenolpthalein solution turns colourless.
2.White crystals are obtained.
Inference:
1.The reaction between ammonia solution and sulphuric acid produce neutral salt.
2.Ammonium sulphate salt is formed.
Conclusion:
Ammonium sulphate salt can be replaced from the reaction between the ammonia solution and
sulphuric acid.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
6/22
Explanation:
1.In the first titration,phenolphthalein solution is added to determine the volume of sulphuric
acid needed to exactly neutralize the ammonia solution.
2.Titration is repeated without using phenolphathalein indicatorso that a pure salt solution is
obtained.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
7/22
PURE METALS
High densities
High melting point
High boiling point
Malleable
Ductile
Weak
Soft
Force Arrangement of electrons Layers of atoms slide over
in a pure metals.Closely each other.
packed in an orderly order.
WHY MAKE ALLOYS?
a)to improve the appearance of the pure metal.
b)to increase the resistence to corrosion of thr pure metals.
c)to increase the strength and hardness of the pure metals.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
8/22
COMPOSITION,PROPERTIES AND USES OF ALLOYS
Alloys
Brass
-copper 70 %,zinc 30%
-high strength,resistence of corrosion
-ornaments,door knobs,bullet cases,electric parts,musical instruments.
Bronze
-copper 90%,zinc 10%
-high strength,resistence of corrosion
-medals,statues,art objects,monuments
Duralumin
-Aluminium 95%,copper 5 %
-low density,high strength,resistence to corrosion
-aircraft,electric cable
Pewter
-Tin 91%,Antimory 70%,copper 2 %
-high strength,resistence of corrosion,bright shiny surface
-arrangements,souvenirs
Steel
-Iron 99%,carbon 1 %
-high strength
-car bodies,bridges,ships
Stainless steel
-Iron 80.6 %,Carbon 0.4 %,chromium 18%,nickel 1 %
-great resistence to corrosion -cultery,sinks,knives,pipers
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
9/22
AMMONIA FERTILISERS
a)ammonium sulphate
b)ammonium nitrate
c)ammonium phosphate
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
10/22
SULPHUR DIOXIDE EMMISIONS-AN ENVIROMENTAL ISSUE
1.Sulphur dioxide gas is released into the atmospheric from
a)the burning of sulphur
b)the burning of high sulphur coals or fuel oils(power station)
c)the extraction of certain metals from their suplhate uses.
2.Sulphur trioxide dissolves in rainwater to form sulphuric acid rain,a component of acid rain.
3.Acid rain causes many environmental problems.
a)corrodes buildings,monuments and statues made from sandstone,limestone or marble.
b)corrodes metallic structures
c)increases the acidity of water in lakes and rivers.
d)increases the acidity of water in lakes and rivers.
4.Ways to control and reduce the effects of acid rain.
a)use low-sulphur fuels.
b)controls the combustion temperature in the furnace.
c)reduce the acidity of soil and lakes by adding bases.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
11/22
FERTILISERS
-phosphate fertilizers
-nitrogen fertilizers
-mixed fertilizers
Paints and pigments
Dyes
Fibres
Detergents
Other uses:
-explosives
-electrolytes
-insecticides
-oil refiring
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
12/22
Stage 1:Formation of sulphur dioxide
a)Sulphur is burnt in air to produce sulphur dioxide
b)Sulphuric dioxide is also produced by roasting sulphide ores (such as lead (11) sulphide) in air.
c)Sulphur dioxide is then mixed with excess air.
d)The mixture is purified and dried.
e)Dust and impurities such as arsenic compounds are removed to prevent the poisoning of the
catalyst.
Stage 2:Formation of sulphur trioxide
a)Sulphur dioxide is oxidized to sulphuric trioxide via a reversible and exothermic reaction.
b)Optimum conditions used are as follows
-temperature :450 ,pressure :1 atmospheric,catalyst:vanadium oxide
c)about 97% conversion occurs under these conditions.
Stage 3:Formation of sulphuric acid
a)Sulphir trioxide os dissolved in concentrated sulphuric acid to form oleum.
b)Sulphur trioxide is not dissolved in water as the heat evolved vapourise the sulphuric acid.The
vapour condenses to form a mist of sulphuric acid which is hard to collect.
c)The oleum is then diluted with water to produce concentrated sulphuric acid,98 %
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
13/22
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
14/22
POLYMERS
Long-chain molecules formed by joining together thousands of small repeating units called
monomers.
A polymer molecule is made by joining together the monomer molecule in a process called
polymerization.
May be divided into natural polymers
-living things
-proteins
-DNA
-starch
-cellulose
-natural rubber
And synthetic polymers
Plastics polythylene
-fibres------nylon
Man made
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
15/22
NATURAL POLYMERS
Cellulose Starch Natural rubber
-complex carbohydrates -complex carbohydrates isoprere
-major structural component -energy reservoir in plants
of woody plants and -glucose
natural fibres such as
cotton.
-consists glucose
SYNTHETIC POLYMERS
Plastics Fibres
-monomers :alkenes -nylon (polymide)
-polythene monomers:diamine-2 amino groups
Monomer,ethane,C H diacid- 2 carboxyl groups
-polyvinyl chloride (PUC) -terylene
=polychloroethene monomers:diacid,diol
Monomer :chloethene,C H CI
-perspex
=poly(methyl methocrylate)
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
16/22
=poly(methyl 2-methylpropenoate)
Monomer: methyl 2-methylpropenoate.
GLASS
Hard but brittle
Non-porous
Heat insulator
Resistant to chemicals
Electric insulator
Easy to clean
Can withstand compression
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
17/22
TYPES AND USES OF GLASSES
Fused glass
-silicon dioxide
-high transparency,high melting point
-glass rode,Quartz lenses,mirrors
Soda-lime glass
-silicon dioxide,sodium,calcium oxide
-low melting points,easily moulded,high thermal expansion
-window glass,bottled,light bulbs
Borosilicate glass
-silicon dioxides,sodium oxides,calcium oxide,boron oxide
-high melting point,low thermal expansion,resistant to heat,resistant to chemical attack
-cooking utensils.labratory glass wires
Lead crystal glass
-silicon dioxide,sodium oxide,lead (ll) oxide
-high density,high refraction index
-prism,high reflective lenses,decorative glasswares
SPECIAL GLASSES
1.Photochromic glass
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
18/22
Photochromic lenses-darken on exposure to sunlight,protect the eyes from ultraviolet radiation
2.Conducting glass
Liqiud crystal display (LCD) panels-conduct an electric current
3.Bioglass
Coating on surgical implants
CERAMICS
1.ceramic means hardened by heat or heat resistant.
2.Ceramics are a class of non-metal materials.
3.Traditional ceramics made from clays are based on silicates just like glass.
PROPERTIES AND USES OF CERAMICS
-strong
-hard but brittle
-electrical insulator
-resistant to heat
-resistent to chemicals
-able to withstand compression
Uses
Construction materials
-bricks,tiles,cement,nuclear reactor,exterior of space shuttles,linings for high temperature
furnaces.
Oriental article
-plates,bowls,cups,vase,porcelain,toilet,sink,floor,wall tiles
Electrical insulators
-ovens,toasters,spark plugs,electric iron,fuses
Semiconductors
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
19/22
-microchips,computers,radios,television,telephones,calculators.
Medical field
-bones,teeth,artificial limbs.
-A mixture of two or more materials.
-can be made by combining different materials such as metals,non metals,alloys,glass,ceramics
and polymers.
Examples-reinforced concrete
-superconductors
-fibre glass
-photochromic glass
Reinforced concrete
-very strong
-original components,concrete-low tensile strength
-consists of steel base and concrete(cement,pond,small pebbles)
-construction of large structures like highways,airport runners,etc.
Superconductor
-very good conductor
-original components: yytrium oxide,barium carbonate,coppe (ll) oxide,non-conductor electric.
-consists of yttrium oxide,barium carbonate,copper (ll) oxide.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
20/22
-used in bullet trains,medical magnetic-imagining like magnetic reasons,magnetic energy-
storage,generators,transformers,computers,electric cables
FIBRE
Fibre optic
-consists of silica.sodium carbonate,calcium oxide
Used to :transmit data,voice and images,ina digital format
Composite materials:transparent
Original components:silica,sodium carbonate,calcium oxide
Fibre glass
-consists of glass fibre and polyster a type of fibre
Used to:to make household products like water storage tanks,badminton rackets,small
boats,skis,helmets.
Photochromic glass
-original components
Glass:transparent but not sensitive to the intensity of light rays.
-silver chloride:sensitive to the intensity of the light rays.
Used to:to make optical lenses,can windshields,smart energy efficient windows in
buildings,information display panels,lens in cameres,intensing meters.
-consists of glass and silver chloride or silver bromide.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
21/22
*FOCUS EXCEL CHEMISTRY FORM 4
Written by -Eng Nguan Hong
-Lim Eng Wah
-Lim Yean Ching
Pelangi
*CHEMISTRY FORM 4 TEXT BOOK
Written by-Low Swee Neo
-Lim Yean Ching
-Eng Nguan Hong
-Lim Eng Wah
-Umi Kalthom Ahmad
Abadi Ilmu Sdn.Bhd
*SPM CHEMISTRY LEARNING THROUGH DIAGRAMS
Written by Dr Rabani Abdullah
Penerbit SAP.
-
8/8/2019 Understand the Manufacture of Sulphuric Acid (1)
22/22
Malaysia has many industrials parts with many types of factories producing a wide variety of
manufactured goods.Petrochemical polymers,petroleum and gas into various types of
plastics,polymers,fertilizers and insecticides.Cement factories turn limestone into cement formaking concrete.Chemical plants turn raw materials from the earth into useful chemicals for
household and industrial uses.
Bricks,sand,cement,reinforced concrete,glass,polymers,plastics,stell,alloys,and composite
materials are then used by the construction industry to build modern and intelligent cities such as
our beautiful Putrajaya.
top related