two steps picking process in sap-wm _ scn
Post on 05-Jul-2018
240 Views
Preview:
TRANSCRIPT
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
1/8
Getting Started Newsletters Store
Products Services & Support About SCN Downloads
Industries Training & Education Partnership Developer Center
Lines of Business University Alliances Events & Webinars Innovation
Log On Join UsHi, Guest Search the Community
Activity Communications Actions
Browse
Tweet
created by Susheel Tiwari on 24-Sep-2014 12:14, last modified by Susheel Tiwari on 10-Nov-2015 18:12
Introduction: Two process is used to optimize the picking process. Suppose, one material is
being used more frequently either in Sales order or in Production order or being transfer one SLOC to Another
SLOC. If frequency of picking of material is more as it is being used in multiple outbound delivery, we can use
2 steps picking to optimize the performance.
Two Steps picking are broken in to 2 steps-1) Collective picking of materials linked to all Reference
documents (OBDs or TR's) 2) Allocation of materials to respective OBD/TR's
All OBD or transfer requirements are cl ubbed in one group and picking happens for all materials mentioned in
OBD or TR clubbed in Group. A transfer order is created to pick the materials and materials are being brought
o Interim Storage type 200. Another TO is created to allocate the materials to respective OBD/ TR's and
materials are moved from Storage Type 200 and process is complete.
Two Step process is very efficient and improves performance of system.
This Documents will discuss about required configuration for Two Step picking.
Process Involved: Two steps picking ar e broken in to 2 steps- 1) Picking with respect to
group which are created to combine all OBDs/TR's
2) Allocation of materials to respective OBDs/TR's
Two Transfer order is created in this process- one for group picking and another TO for allocation. First TO
brings the materials to interim storage Type 200 from a bins which was used for picking. Second TO is used
o allocate the materials to respective OBD's/TR's.
e need to configure to make this happen. I will only touch upon configuration involved for Two step Picking.
ill not discuss about Strategy for removed from Bins.
Configuration Involved: As We discussed above, TO can be created either from OBDor TR's so we need to set up configuration for 2 steps picking for shipping used for OBD as well as
Transfer requirements.
A) Activate Two step picking for Transfer requirement: We need to activate 2 step picking for Transfer
Requirement. We can make 2 step picking material dependent or Independent.
Menu Path-
SPRO-->Logistic Execution-->Warehouse Management-->Activities-->Transfers-->Set up 2 step picking
process for Transfer Requirement
Two Steps Picking Process in SAP-WM Version 1
http://scn.sap.com/people/susheel.tiwari2http://scn.sap.com/people/susheel.tiwari2http://scn.sap.com/community/developer-centerhttp://scn.sap.com/contenthttp://scn.sap.com/welcomehttp://scn.sap.com/people/susheel.tiwari2http://scn.sap.com/people/susheel.tiwari2https://twitter.com/sharehttp://scn.sap.com/contenthttp://scn.sap.com/actionshttp://scn.sap.com/communicationshttp://scn.sap.com/activityhttp://scn.sap.com/login.jspahttp://scn.sap.com/docs/login.jspahttp://scn.sap.com/community/uachttp://scn.sap.com/community/developer-centerhttp://scn.sap.com/community/downloadshttp://scn.sap.com/welcomehttps://www.sapstore.com/?url_id=banner-US-2015-SCN-HeadLinkhttp://scn.sap.com/community/newslettershttp://scn.sap.com/community/getting-started
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
2/8
hen click on Set up 2 step picking for Transfer Requirements, another screen opens where we have 2
activities need to be performed as shown below
Under Transfer requirement control, we have to make following setting
1) Assign 2 step picking under column 2stP for given Warehouse No
2) 2 Step is Material dependent or not. If check column 2-stMatl, only those Materials will be part of 2 steps
picking where 2 step provision is made in Material master under Warehouse view 1
3) Movement type 850 needs to be assigned as this is movement type will be used during first TO during
collective picking to bring the materials to interim Storage Type 200
Once it is done, we need to set up 2 step picking for transfer type- Stock removal under transfer type control.
Same configuration is involved for outbound Delivery. Configuration path can be found under Interface--
>Shipping-->2 step picking
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549061/Pics5.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549059/Pics4.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549046/Pics3.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549045/Pics2.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549044/Pics1.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
3/8
Now once it is configured, We now need to set up Storage type search for 2 step picking. Here we need to
assign operation 2 and give storage type as 200 as stock will be kept at storage type 200 before final
allocation.
Configuration step will be same as we do for normal Put away and Stock removal Storage type search
SPRO-->Logistic Execution-->Warehouse Management-->Strategies
Now Configuratio n is complete. Now let's have a one 2 step picking example for better understanding.
We will take 2 step picking for transfer requirement document. We will create TR via SLOC to SLOC transfer. If both
SLOC are warehouse Managed under same Warehouse no, Posting change notice is created but we need to have TR
so I will transfer from WM managed SLOC 1000 to non WM managed SLOC 2000 in below example.
Following steps needs to be executed
1) Assigning 2 step indicator in Material Master:
2) Creation of TR via Transfer Posting in IM via MB1B with movement Type 311:
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549152/Pics8.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549067/Pics7.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549065/Pics6.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
4/8
We have Generated 3 TR via 3 Transfer posting which we can see in LB11 report
3) Cre ation of group : Now we need to create group combining all these 3 TR's which wil l be reference documents
for first TO for collective picking. Group is created via LT41 transaction
Screen is showing 3 TR's have been clubbed. Now Select Row and press Assign Group to create Group. Another
Screen will appear where give Description of group as shown below
4) Run LX39 report :
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549168/Pics13.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549167/Pics12.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549158/Pics11.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549154/Pics9.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
5/8
System will ask to enter Group no created above and Warehouse No. Execute the report. System will display 2 Row-
Picking and allocation if group is 2 step relevant else System will give warning message
5) Creation of TO for collective Pick:Now put cursor at Pick row and click on Create TO to initiate picking process
Press Enter .
Select Stor type Srch Seq to see which Storage type is being proposed for Destination. It should Be 200. Once it is
done, Generate TO
6) Confirm TO: Confirm TO to complete the picking step. Run LT12 and enter the TO generated above
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549200/Pics19.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549191/Pics18.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549184/Pics16.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549183/Pics15.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549182/Pics14.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
6/8
7) Run LS26 report: We can see stock status. Stock will be lying under Storage type 200
Now Coll ective Picking process is done. We can see Picking row wil l be green if we put cursor on pick row and press
Data
8) Create TO for allocation: Put the Cursor on Allocation and select create TO button to create TO
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549208/Pics22.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549207/Pics25.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549206/Pics21.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
7/8
Select Start multiple Proc. button to initiate TO
So we can see that Allocation to respective TR has occurred via TO#98,99 and 100. Now we can see that LX39 report
shows allocation green as it is completed.
Now 2 Step picking process is completed.
This Document was created with Co-Author-Pankaj Agarwal who is very much enrich in SAP-MM/WM coming from
very rick background of Procurement and Planning.
http://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549258/pics28.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549257/Pics27.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549228/Pics26.jpghttp://scn.sap.com/servlet/JiveServlet/showImage/102-58343-1-549227/Pics23.jpg
-
8/16/2019 Two Steps Picking Process in SAP-WM _ SCN
8/8
Follow SCNSite Index Contact Us SAP Help Portal
Privacy Terms of Use Legal Disclosur e Copyr ight
Average User Rating
(2 ratings)
Tweet
5871 Views
5 Comments
Like (0)
Ashish Aror a 08-Oct-2015 12:44
Good document.
Thanks
Ashish
Like (0)
Raghu Akula 08-Oct-2015 14:01
Very well composed document and very useful
Like (0)
Laxman Kamulugari 31-Dec-2015 08:32
Nice Document
Regards
Laxman
Like (0)
asha george 25-Jan-2016 11:26
Excellent document.
Like (0)
mohan naidu 23-Apr-2016 16:23
Nice
http://scn.sap.com/people/mohan.naidu1http://scn.sap.com/people/asha.georgehttp://scn.sap.com/people/laxman.kamulugarihttp://scn.sap.com/people/raghu.akulahttp://scn.sap.com/people/arora.ashish1https://twitter.com/sharehttp://www.sap.com/corporate-en/our-company/legal/copyright/index.epxhttp://www.sap.com/corporate-en/our-company/legal/impressum.epxhttps://accounts.sap.com/ui/public/viewTextResource?scenario=SCN&spId=504efd8ee4b0555c3c17b94e&resourceType=RESOURCE_TERMS_OF_USE&version=1&spDisplayName=SAP%20Community%20Network&locale=enhttps://accounts.sap.com/ui/public/viewTextResource?scenario=SCN&spId=504efd8ee4b0555c3c17b94e&resourceType=RESOURCE_PRIVACYPOLICY&version=1&spDisplayName=SAP%20Community%20Networkhttp://help.sap.com/http://scn.sap.com/docs/DOC-18476http://scn.sap.com/docs/DOC-19361http://spr.ly/SCNgoogleplushttp://bit.ly/SCNyouThttp://bit.ly/SCNFBhttp://bit.ly/SCNTwR
top related