tssystem · 2019. 12. 3. · self tapping and aggressive threads platform switching for preserving...
Post on 27-Mar-2021
4 Views
Preview:
TRANSCRIPT
ImplantSystemTS
SEM (Scanning Electron Microscope) Imaging
SASurface
RBM
SA‘S’Co.SA
SA: Sand blasted with alumina
and Acid-etched surface.• Optimal morphology: combination of craters and micro-pits.
• Optimal surface roughness: Ra 2.5~3.0µm.• Early cell response: 20% faster than RBM.• Early bone healing: 20% faster than RBM.• Early loading can be done after 6 weeks of placement.
Osstem SA and ‘S’ surfacemorphology and roughnessincreased by 45% comparedto RBM treatment.
x4K
x2K
x2K x2K
2
x4K
x4K
SA Surface to
enhance biological
healing
Manufactured
using Grade C4
pure Titanium
Morse taper
and internal hex
connection
Self tapping
and aggressive
threads
Platform Switching
for preserving bone
The TSIII SA implant has been developed with the mostadvanced research and devlopment by Osstem Implant. This is the ultimate implant for any case, as it uses a simplesurgical procedure. The featured SA surface allows for quickosseointegration, promoting a quicker healing time.The optimal design gains high initial stability in any bonedensity. Its vast range of sizes makes it the perfect implantfor any patient.
3
TSIIISA
Tapereddesign toprovideexcellentmechanicalstability
Ø3.0 L 8.5 10 11.5 13 Hex 2.1
Product Code TS3M3008S TS3M3010S TS3M3011S TS3M3013S
Ø3.5 L 8.5 10 11.5 13 Hex 2.1
Product Code TS3M3508S TS3M3510S TS3M3511S TS3M3513S
Ø4.0 L 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S4007S TS3S4008S TS3S4010S TS3S4011S TS3S4013S
Ø4.5 L 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S4507S TS3S4508S TS3S4510S TS3S4511S TS3S4513S
M
M
M
R
R
TSIIISA
The TSIII SA fixture has two types of abutment connectionsfor a simple restorative procedure. A Mini Connection is usedfor the Ø3.0 and Ø3.5 implants. All other implants (Ø4.0,Ø4.5, Ø5.0, Ø6.0 and Ø7.0) use Regular Connections. TheMini Connections are highlighted yellow below. In contrast,the Regular Connection can be used with the same abutmentfor fixtures 4.0 and wider, regardless of the diameter of theabutment. These are highlighted green below.
Mini:Ø3.0
Ø3.5
Diagrams not to scale.
R
Regular:Ø4.0
Ø4.5
Ø5.0
Ø5.5
NEW
Hex 2.1
Ø2.8
2.8
5.5
8.0
Hex 2.5
Ø3.35
2.8
6.5
4
Ø6.0 L 6 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S6006S TS3S6007S TS3S6008S TS3S6010S TS3S6011S TS3S6013S
Ø7.0 L 6 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S7006S TS3S7007S TS3S7008S TS3S7010S TS3S7011S TS3S7013S
Ø5.0 L 6 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S5006S TS3S5007S TS3S5008S TS3S5010S TS3S5011S TS3S5013S
Ø5.5 L 6 7 8.5 10 11.5 13 Hex 2.5
Product Code TS3S5506S TS3S5507S TS3S5508S TS3S5510S TS3S5511S TS3S5513S
R
R
R
R
TSIII Ultra-wide
Diagrams not to scale.
Fixture only:Fixture product code (example : TS3S6010S)
Pre-Mounted Fixture (Simple mount) M + Fixture product code (example : MTS3S6010S)
Hex Ø 1.2
L
D
Hex Ø 1.2
5
TSIVSA
The implant thatspecially performsin the weaker bone
Small Thread:
Increased
initial stability
in soft bone
Corkscrew
Thread:
Helical
cutting
edge
Sharp and
rounded apex
6
Sand-blasted
acid etching
Increasedtaper forimprovedinitialstability
Ø 4.0 : 0.8Ø 4.5 : 1.0Ø 5.0 : 1.2
Fixture only:Fixture product code (example : TS3S6010S)
Pre-Mounted Fixture (Simple mount) M + Fixture product code (example : MTS3S6010S)
• Increased taper for improved initial stability.• High success rate, even with poor bone quality.• Specially developed for maxilla and soft bones.• Improved initial stability with application of helicalcutting, corkscrew thread and sharp rounded apex, allowing the implant to be placed with minimal drilling.
• Submerged-type implant with morse taperedinternal hex connection.
• Excellent self-tapping ability.• Recommended insertion torque: below 40Ncm.
Ø4.0 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 0.8
Product Code TS4S4007S TS4S4008S TS4S4010S TS4S4011S TS4S4013S
Ø4.5 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 1.0
Product Code TS4S4507S TS4S4508S TS4S4510S TS4S4511S TS4S4513S
Ø5.0 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 1.2
Product Code TS4S5007S TS4S5008S TS4S5010S TS4S5011S TS4S5013S
R
R
R
Diagrams not to scale.
7
L
D
Hex Ø 1.2
Ampoule user guideApplying: grip type ampoule to protect TSIII SA surface.
1. Remove the back of theblister (sterilised conditionis not guaranteed once theblister is removed).
2. Remove the capsuleby rotating.
3. Connect driver - clickswhen properly connected.
4. Remove implantfrom grip holding
TS Packaging
Mini: Yellow Regular: Green
OSSTEM UK 15-17 The Crescent, Leatherhead, Surrey KT22 8DYT: 01372 383 172 E: info@osstemuk.com www.osstemuk.com
122 TAPER KIT
8
Available for use: TSIII SSIII USIII
Base Components:
TS NoMountDriver
TSNMDMLTSNMDRL
SS NoMountDriver
SSNMDS
TorqueExtension
OTE
SS FixtureDriver
SSRFDL
TS FixtureDriver
GSMFDLGSRFDL
DrillExtension
ODE
TaperParallel Pin
APP3522: 2ea
APP2227: 2ea
122Parallel Pin
HandDriver
AHD12SHAHD12LH
Torque WrenchTW30B
Depth GaugeOSDG
TorqueDriver
TRHD12STRHD12L
SimpleMountDriver
ASMDSASMDL
SimpleMount
Extension
ASMESASMEL
RemovalTool
ERFMERFR
Ø2.2Twist Drill
2D2207LC012D2208LC012D2210LC012D2211LC012D2213LC01
Guide Drill
OGD2027L
122TPD3507122TPD3508122TPD3510122TPD3511122TPD3513
F3.5Twist Drill
3D2718FNLC3D2715FNLC01
Ø2.7Twist Drill
122TPD4007122TPD4008122TPD4010122TPD4011122TPD4013
F4.0Twist Drill
122TPD5007122TPD5008122TPD5010122TPD5011122TPD5013
F5.0Twist Drill
122TPD4507122TPD4508122TPD4510122TPD4511122TPD4513
F4.5Twist Drill
122TPD5507122TPD5508122TPD5510122TPD5511122TPD5513
F5.5Twist Drill
From Osstem
top related