transparently bridge two networks without using wds (eoip) - mikrotik wiki
Post on 22-Jun-2015
91 Views
Preview:
TRANSCRIPT
Transparently Bridge two Networks without using WDS (EoIP)
Contents
1 Server Setup:
1.1 Server IP Addresses
2 Client Setup:
2.1 Client IP Addresses
3 Check your setup
Server Setup:
Server IP Addresses
/ ip address add address=192.168.0.1/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.1/24 interface=wlan1 disabled=no
Client Setup:
Client IP Addresses
/ ip address add address=192.168.0.2/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.2/24 interface=wlan1 disabled=no
Note that this image is incorrect - Set the Mode to Station and it will work fine then
top related