topography. topography the shape of the land topography of an area is determined by: elevation:...
Post on 18-Dec-2015
224 Views
Preview:
TRANSCRIPT
Topography
TopographyTopography • The Shape of the land
Topography of an area is determined by:
• Elevation:
• Relief:
• height above sea level
• difference in elevation (highest point and lowest point)
Low relief
High relief
•Landform
•Topography shows us:
•a feature of topography (the top of the Earth)
• Landforms, elevation and relief of each area.
Pair Share Partner A: What is
elevation?Partner B: Explain the elevation of the plan
Pair Share What is relief?
Explain the relief in the picture.
Pair Share What is Landform?
Explain the different landforms in the picture:
• What is a topographic map?
• Topographic maps provide information about:
• Maps that show the surface features of an area.
• The shape of the land.– Elevation
– Relief
– Slope
• Contour Lines: • lines on the map that connect points of equal elevation
• Contour interval:
• change in elevation from one line to the next…imagine each line like a step up or down
Contour lines
Relationship between topographic features and contour lines
Let’s take a walk up a hill!
We’re now at an elevation of 100 meters.
100m
Let’s keep going!
100m
Now we’re at 200m.
100m
200m
Shall we march on?
100m
200m
We’ve made it to 300m!
100m
200m
300m
On to the peak!
100m
200m
300m
We’re on the peak, but what’s our elevation?
100m
200m
300m
Any ideas?
100m
200m
300m
Let’s add contour lines for every 50 meters and see if that helps.
100m
200m
300m
We know that we are above 350m, but less than 400m.
50m
150m
250m
350m
100m
200m
300m
Let’s head down the hill, it’s getting late!
50m
150m
250m
350m
100m
200m
300m
Now what’s our elevation? White Boards:
50m
150m
250m
350m
If you said somewhere between 200m and 250m you are right!
100m
200m
300m
Let’s try this again!
50m
150m
250m
350m
100m
200m
300m
What’s our elevation now?
50m
150m
250m
350m
If you said 50m or just under, you’re right!
Let’s now look at the
same hill, but the way we might see it from an airplane!
Each color change represents a 50 meter increase.
Features of Topographic MapsRelationship between 3D and 2D representation
3D view
2D view
Pair Share: What does it mean if the contour lines are close
together?
Pair Share: What does it mean if the contour lines are far
apart?
Notice how the contour lines are used to show how gentle or steep the slope is.
Why would it be important to know if something was
steep or gentle slope?
Sometimes on maps you will see dark colored lines?
• Why do you think they have dark colored contour lines on the map?
Index Contours
• An index contour is a contour line that is thicker or darker.
• Index contours occur every fifth contour line.
Hills• Represented by a series
of contour lines in a rough circle
Streams • looks like an upside down V.
• It opens in the direction the water is flowing.
Depressions• Show indents. • Drawn with marks on
the inside.
Pair Share1. What are index contours and how are
they shown on the map?2. Why are index contours important?3. If you were to create a topographical
map what would it look like if you were to try and show a hill?
4. If you were to create a topographical map what would it look like if you were to try and show a depression or stream?
Topographic maps also identify natural structures and structures made by man.
Topographical Map
1. Name the highest elevation shown for this volcano.
2. What is the contour interval of this map?
1000
1250
1500
1000
1250
1500
1750
2000
22502500
1000
1000
Point B sits right on the 10 ft contour line. Since all points on this line have an elevation of 10 ft, the elevation of point B is 10 ft.
3. What is the elevation of Point B?
Point C does not sit directly on a contour line so we can not determine the elevation precisely. We do know that point C is between the 10ft and 20 ft contour lines so its elevation must be greater than 10 ft and less than 20 ft. Because point C is midway between these contour lines we can estimate the elevation is about 15 feet (Note this assumes that the slope is constant between the two contour lines, this may not be the case).
4. What is the elevation of Point C?
We are even less sure of the elevation of point D than point C. Point D is inside the 20 ft. contour line indicating its elevation is above 20 ft. Its elevation has to be less than 30 ft. because there is no 30 ft. contour line shown. But how much less? There is no way to tell. The elevation could be 21 ft, or it could be 29 ft. There is now way to tell from the map.
5. What is the elevation of Point D?
Just as with point C above, we need to estimate the elevation of point E somewhere between the 0 ft and 10 ft contour lines it lies in between. Because this point is closer to the 10 ft line than the 0 ft. line we estimate an elevation closer to 10. In this case 8 ft. seems reasonable. Again this estimation makes the assumption of a constant slope between these two contour lines.
6. What is the elevation of Point E?
Review Questions1. How are contour lines drawn on
maps?2. How does a contour map show
whether a slope is gentle or steep?3. Describe at least four natural or man-
made structures that can be shown on a topographic map
How’s It Used?
Can you think of some ways a topographic map might be used?
Topographic Maps are used in:– Geographic Planning– Architecture– Civil Engineering– Earth Sciences– Mining– Hiking
Warm-up #5Write if each example of chemical or
mechanical weathering.1. Halite in rocks is dissolving.2. Acid from plant roots break up the
rock. 3. Wind blows sand around cutting
at the side of a mountain. 4. Carbonic Acid dissolves limestone
creating a stalagmite in a cave 5. A rock turns red due to oxidation6. A rock becomes smaller as it
travels down stream.
Warm-Up # 1 • What is a contour line?• A line that connects points of equal
elevation. • What are 4 major agents of erosion? • Water, wind, ice and gravity • What is the dominant agent of
weathering and erosion.• Water
Warm-Up # 5
1. What is a contour line?2. The change in one elevation to
the next is called?3.A ____ map shows the surface
features of an area.4.Explain how weathering, erosion
and deposition change the topography of the land?
Warm-Up # 6
1. What is a contour line?2. Describe the difference between a
high relief and a low relief.3.Draw a:a.Depression b.Hill4. What causes iron to rust? 5. What type of weathering is it when
water dissolves a rock?
Warm-Up # 3
1. What is a contour line?2. Describe the difference between a
high relief and a low relief.3.Draw a:a.Depression b.Hill
What is the elevation at A:, B:, C:, D: E:?
Warm Up 3
top related