tecno wash automatic cleaaning machineestanflux.es/images/stories/novedades/tecno-wash eng.pdf ·...

Post on 30-Jun-2020

2 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

TECNOAutomatic CleaAutomatic Clea

In order to guarantee the highest quality in screenrequested after their use with solder pasWith the continuous reduction of components sibecause the normal hand washing techniques doapertures.Obviously this must be done in the shortTECNOLAB, thanks to its long experience in the proand glues, has developed a machineTECNO‐WASH.

‐WASHaning Machineaning Machine

printing process, the stencils automatic washing isste or glue, to prevent harmful deposits.ze, an automatic process has become necessarynot guarantee a good cleaning result inside the

est possible time and at the lowest cost.oduction of laser stencils and sale of solder pastese that meets all these requirements:

DESCRIPTION and USE

TECNO‐WASH is an a new generation automaticwashing machine, completely made in all its partswith anticorrosive PCV.The machine is designed to optimize both energyand cleaner consumption. Operation is very simpleand intuitive.After turning on the machine you have to wait afew minutes until the cleaner comes tofew minutes until the cleaner comes totemperature. Then, after putting the stencil in themachine and choosing the most appropriateprogram, the machine is ready to work. With thenew software interface, all these operations arevery simple.Washing is divided into 4 steps:‐ PRE‐CLEANING ‐ CLEANING‐ FINAL CLEANING‐ DRYINGDuring the cleaning cycle, to increase the cleaningpower, air bubbles under high pressure are mixedwith cleaner This guarantees an optimal end resultwith cleaner. This guarantees an optimal end resultregardless of the stencil conditions and the paste orglue used.Drying is obtained by compressed air. This ensurean important energy saving compared to using hotair.

TECNICAL DATAS‐ Use only not flammable cleaners.‐ All parts are made of anticorrosive PVC.‐Wash tank with 2 spray arms.‐ Spray arms with high pressure nozzles (4/arm).‐ 3 filtering systems (settling tank and 2 filters of20 e 5 micron).‐ 9 customized wash programs.‐Monitoriing of cleaner level.‐ 25 liters cleaner.‐ Thermostatic bath tank.‐Maximun stencil size: 29”x29”.‐Machine size: 115cm x 50cm h 150cm.‐ Power consuption: 1,5 Kw.‐Weight: 65 Kg.

NEW SOFTWARE INTERFACE

top related