tap - scre drier - die rinding - stud elder - tapping ......el machuelado es una operación en cnc...

Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud

Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding -

Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die

Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver

- Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw

Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap -

Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Re-

tap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Heli-

coils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone

- Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control

- Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque

Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with

Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner

with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut

Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr

- Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink

- De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Coun-

tersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream-

Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer -

Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding

- Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die

Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver

- Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw

Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap -

Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Re-

tap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Heli-

coils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone

- Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control

- Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque

Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with

Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner

with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut

Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr

- Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink

- De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Coun-

tersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream-

Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer -

Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding

- Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die

Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver

- Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw

Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap -

Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Re-

tap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Heli-

coils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control - Hone

- Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque Control

- Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with Torque

Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner with

Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut Runner

with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr - Nut

Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink - De-burr

- Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Countersink

- De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder - Tapping - Chamfer - Ream- Coun-

tersink - De-burr - Nut Runner with Torque Control - Hone - Burnish & Size - Drill - Insert Helicoils - Retap - Screw Driver - Die Grinding - Stud Welder -

Capacidad Hasta 7/8”

Incremente La Producción

Disminuya el Traslado de Materiales

BRAZOS MACHUELADORES

NEUMÁTICOS

www.flexarminc.com

www.flexarminc.com1-800-837-2503

flexarm@flexarminc.comREV.004

Modelos Rango De Trabajo

Capacidad De Machuelado

Torque Máx. Opciones de Velocidad

A - 32 11” - 34” 0 - 9/16” 28 ft/lb 400, 600, 1000,1500, 2500,5000

S - 36 14” - 51” 0 - 9/16” 28 ft/lb 400, 600, 1000,1500, 2500,5000

M - 60 22” - 76” 0 - 9/16” 28 ft/lb 400, 600, 1000,1500, 2500,5000

RNR - 20 14” - 72” #6 - 7/8” 63 ft/lb 100/400 or 200/700

BRAZOS MACHUELADORES NEUMÁTICOS

Cuando su centro de maquinado no está

fresando, barrenando o mandrilando, cuesta dinero a su compañía. El Machuelado es una

operación en CNC ineficiente y costosa,

su mejor opción es un FlexArm. Su operador CNC puede utilizar

el FlexArm para Machuelar barrenos,

mientras que el centro de maquinado

trabaja sobre la siguiente pieza de trabajo. El uso de

su equipo FlexArm en conjunto con

su centro de mecanizado

ahorra dinero, tiempo,

herramientas y materiales

A-32 S-36

M-60 RNR-20

*Available with Multi-Head

Las capacidades y Velocidades mostradas, dependen del motor a elegir.

Sistema Automático de Lubricación:

Envía la cantidad de refrigerante necesaria cuando

el motor está funcionando.

Paro Automático de Profundidad:

Permite al operador controlar la profundidad y mantener la consistencia.

Mesa o Carro con Placa de Acero Rectificada: Una opción de montaje móvil duradero para su nuevo FlexArm.

Soporte para sus herramientas:Mantenga sus boquillas y porta herramientas limpias y organizadas.

Base Magnética de montaje: Aumente la movilidad

de su FlexArm.

Accessories

Wapakoneta, Ohio 45895851 Industrial Drive

Don’t See What you need? Ask about Custom Accessories

Clamps de cambio rápido: Coloque la pieza, sujete y rosque.

Sistema Semi-Automático de Lubricación:

Permite al operador rociar con lubricante el machuelo

en cantidad deseada manualmente.

*No disponible en A-32

Adaptador De Machuelado Horizontal: Permite un cambio rápido de machuelado vertical a horizontal mientras permanece perpendicular a la superficie de trabajo.*Disponible en modelos A-32, S-36 y M-60

Porta-Machuelos con Torque

Elimine la rotura de Machuelos

MACHUELADO EN CNC

MACHUELADO CON FLEXARM

COSTO DE MACHUELADO CON CNC:

$416*• 8.5 Horas más lento• Mayor rompimiento de machuelos• Tiempo Ciclo Adicional• Requiere herramientas adicionales

durante el ajuste por el cambio de herramientas.

• Mayor desgaste de los husillos, ya que se aplica freno y reversa.

COSTO DE MACHUELADO CON FLEXARM:

$0• 8.5 Horas más rápido• Reducción de machuelos rotos, gracias a sus boquillas con control de torque. • Reducción Tiempo Ciclo• Reducción Tiempo de reparación

Estudio de Tiempo / CostosNecesitamos 2,000 Partes “A”.

El mecanizado de la Parte “A” requiere un roscado en 5 barrenos.

Podemos programar la máquina CNC para roscar y ocupar tiempo valioso del CNC ...

O

El operador de CNC puede machuelar esos barrenos con un FlexArm durante el ciclo del CNC. (En lugar

de utilizar ese tiempo para revisar su Facebook)

Roscar en CNC requiere 15 segundos de tiempo de máquina extra por

pieza. Para 2,000 piezas son 10,000 agujeros,

esto es 8.5 horas más rápido para ros-car fuera de línea.

Part A

El costo de Machuelado se refleja sólo en el tiempo de la labor de trabajo, a una tasa de $ 50 USD por hora, no incluye el costo de los Machuelos rotos y las partes desechadas resultante de Roscar en el CNC.