system test for desigo total room automation™
Post on 26-Jun-2015
1.329 Views
Preview:
DESCRIPTION
TRANSCRIPT
System test for DESIGO
Total Room Automation™
Zug, Switzerland
PXC3 controllers
• PXC3 series room automation stations with Total Room Automation™ applications (TRA) can be used for buildings with more sophisticated requirements on functionality and flexibility. TRA is used when several disciplines (HVAC, lighting, blinds, sun protection) are combined to form one total solution and when total flexibility is required. TRA is predestined for solutions optimizing energy (class A) without loss of comfort.
The room automation stations have a 2-port Ethernet switch to allow for low-cost
cabling via line topology.
TX-I/O modules connected directly to the PXC3 allow for direct connection of
field devices. This allows for maximum flexibility.
The PL-Link peripheral bus allows room units, sensor, and actuating devices to
communicate with the room automation station
PL-Link devices
The DALI bus allows for lighting control. Commercially available DALI EBGs (electronic
ballast) and dimmers can be connected.
Photos
Photos
Photos
top related