specification sheet air sea biojar™ 1.5 litre - ip2 inner ... · air sea biojar™ 1.5 litre -...

AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER PACKAGING

AIR SEA CONTAINERS LTD.

SPECIFICATION SHEET

INNER IP2PACKAGING

CODE:490HIGH PERFORMANCEPOLYPROPYLENE JAR

AND SEALED CLOSURE

SUITABLE FOR MOSTCORROSIVES AND

TOXIC SUBSTANCES

NOTES:The BioJar™ has a NominalCapacity of 1.5 Litres, and iscapable of withstanding

95 kPa (1 Bar)The closure is internallythreaded polypropylene whichis secured tightly by the use ofthe handle at the head. Thestandard bung seal is EPDM.

This container is suitable for:Flammable Liquids (Class 3)Flammable Solids (Class 4)Oxydizing Agents (Class 5)Peroxides (Class 5)Toxics (Class 6.1)Infectious

Substances (Class 6.2)Some Radioactives (Class 7)Most Corrosives (Class 8)

It is the Shippers responsibilityto ensure that products arecompatible with theircontainers and closures.

This BioJar™ Jar may betransported in a variety of outerpackagings and can be usedas a Primary Receptacle orSecondary Packaging underICAO/IATA PackingInstruction 620 for InfectiousSubstances and under IATAPacking Instruction 650 forDiagnostic Specimens.

Further details on Request.

A FULLY AUTOCLAVABLE POLYPROPYLENE CONTAINERCAPABLE OF WITHSTANDING 95kPa.

NOMINAL DIMENSIONSRadius 60mm Body Wall Thickness: 3mmInternal Diameter: 120mm Aperture Wall Thickness: 6mmExternal Diameter: 150mm Bung Size: 135mmExternal Height: 160mm Overall Weight: 284gInternal Height: 155mm Nominal Capacity: 1.5 LitreOverall Height: 190mm Brimful Capacity: 1.6 Litre

CAUTION! DRY ICE MUST NOTBE PACKED IN THE BIOJAR™

OTHER OPTIONAL ACCESSORIES

CODE 485122 x 10mm E.P.E.LAYER PAD

CODE 486122 x 25mm E.P.E.LAYER PAD

CODE 489122 x 25mm E.P.E.SPECIMEN HOLDER7 x 28mm holesOR 7 x 34mm holes(CODE 493)

CODE 483122 x 25mm E.P.E.SPECIMEN HOLDER25 x 12mm holes

CODE 484122 x 25mm E.P.E.SPECIMEN HOLDER50 x 7.5mm holes

BioJar™POLYPROPYLENECLOSURE WITHEPDM SEAL& Built-in torque handle

SEAL LUG

OptionalTamper-EvidentSeal (CODE 499)

PolypropyleneBioJar™CONTAINERCapable ofwithstanding95kPa.

Flat Base

CROSS SECTION OF FLUSH CLOSURE

EPDMSeal

HandleReinforcing

BossLip

3mm Walls

120mm

521 Cavendish StreetBirkenhead, CH41 8FZ

Unted KngdomTel: +44 (0) 151 653 1500Fax: +44 (0) 151 653 1515

Web site: www.air-sea.co.ukE-mail: sales@air-sea.co.uk