sony playstation scph-9002 teardown...step 1 — sony playstation scph-9002 teardown here's the...
Post on 29-Jun-2020
93 Views
Preview:
TRANSCRIPT
Sony PlayStation SCPH-9002 TeardownWritten By: imacg517
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7
INTRODUCTION
I have a PlayStation 1, and i have decided to make a new teardown of it.
I'm spanish, so my english is a bit poor, and sorry for the mistakes made in this teardown.
Without further delay, we start.
TOOLS:iFixit Opening Tools (1)Spudger (1)64 Bit Driver Kit (1)
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 7
Step 1 — Sony PlayStation SCPH-9002 Teardown
Here's the PS1.
Turn the PS1 over and remove the six screws.
Step 2
Remove the top cover. It's veryeasy.
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 7
Step 3
Disconnect both CD-ROMconnectors.
CD connector one and the socketit connects to.
CD connector two and the socketit connects to.
Step 4
Remove the CD-ROM reader. You should be able to pull it out gently, although you may have towiggle it around a bit to loosen the rubber holders.
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 7
Step 5
Detach both cables. They go to thepower supply and to the memorycards and controller connectors.
Step 6
Remove the four screws and themetal cover.
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 7
Step 7
Now you have the motherboard!
And the power supply.
Remove the four screws from themotherboard and the power supply.
Step 8
Once the screws are removed,remove the power supply.
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 7
Step 9
Remove the motherboard, and bothof the screws from the memory card/controller connection mechanism.
Step 10
Now, you have all your PlayStation1 parts!
Main Board
Lower Casing
EMI Shield
Power Supply
Disk Reader
Memory Card/ ControllerMechanism
Sony PlayStation SCPH-9002 Teardown Draft: 2019-11-14Guide ID: 2631 -
This document was generated on 2019-11-17 02:17:03 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 7
top related