smartank pro split harging - merlin...the merlin logo, slogan “the power people” and m-power are...
Post on 15-Oct-2020
2 Views
Preview:
TRANSCRIPT
SmartBank PRO - Split Charging
Merlin Equipment Limited, Unit 4, Cabot Business Village, Poole, Dorset, BH17 7BA, United Kingdom
T: +44 (0) 1202 697979 F: +44 (0) 1202 691919 W: www.merlinequipment.com
SmartBank PRO is the most advanced stand-alone split
charging device available. Utilising industry accepted “Best
Method” split charging, SmartBank PRO introduces no volt-
age drop, does not force feed batteries and allows capacity
sharing between battery banks to stretch battery run-times
to the max. On board DSP (Digital Signal Processing) pre-
vents it being confused by transient loads and built in Data-
logging allows you to track system performance and tune it
to maximise charge efficiency.
SmartBank PRO can be batch programmed by PC—ideal for
fitting across large fleets. Suitable for SRCS systems.
• Advanced Split Charging for larger systems & profes-
sional users
• Manual and Computer Adjustment of Split Charge
Settings and built in data-logging
• Charge Prioritising & Capacity Sharing - allows you
to prioritise charge order and share spare engine
battery capacity with auxiliaries
• 8 x programmable inputs & outputs to allow easy
integration of alarms, interlocks, dual station emer-
gency parallel switches and automatic reset of flat
battery protection systems
• Suitable for 2 or 3 battery banks
Installation Examples: Installation Example:
SmartBank PRO is available
for 2 or 3 battery bank in-
stallations. The SmartBank
Contactors are Ignition Pro-
tected and rated to IP66.
Contactors and settings can
be configured to prioritise
charging.
Parallel
Switch
Parallel
Switch
CPU
Engine
Contactor
Contactor Conta-
ctor
CPU
Engine
Engine
Battery
Auxiliary
Batteries
Auxiliary
Batteries
Engine
Battery
Auxiliary
Batteries 2
Auxiliary
Loads 1
Auxiliary
Loads 2
Auxiliary
Loads
SmartBank PRO - Split Charging
Merlin Equipment Limited, Unit 4, Cabot Business Village, Poole, Dorset, BH17 7BA, United Kingdom
T: +44 (0) 1202 697979 F: +44 (0) 1202 691919 W: www.merlinequipment.com
All specifications are provided in best possible faith but may be subject to change without notice. The Merlin Logo, slogan “The Power People” and M-Power are trade marks of Merlin Equipment Limited.
All business is transacted according to our Standard Terms & Conditions, a copy of which is available upon request.
12 VOLT MODELS 24 VOLT MODELS
PART # 04-8011 04-8012 04-8013 04-8014
NUMBER OF BATTERY BANKS 2 3 2 3
CONTACTOR CURRENT - CONTINUOUS 200A
CONTACTOR CURRENT - 5 MINS 250A
CONTACTOR CURRENT - CRANKING (EMEGENCY PARALLEL) 725A
POWER CONSUMPTION <10mA <5mA
CONNECT/DISCONNECT VOLTAGE ADJUSMENT RANGE Fully adjustable
TIME ADJUSTMENT RANGE Fully adjustable
CPU DIMENSIONS LxWxH MM (INCHES) 68 x 110 x 32 (2.67 x 4.33 x 1.26)
CPU WEIGHT GRAMMES (POUNDS) - EX CABLES 178 (0.39)
CONTACTOR DIMENSIONS LxWxH MM (INCHES) 91 x 50 x 39 (3.59 x 1.97 x 1.54)
CONTACTOR WEIGHT GRAMMES (POUNDS) 375 (0.83)
COMPLIANCE EMC2002/95/EC, CE, ISO7637-2, SAE J1171
E-MARK CERTIFICATION YES YES YES YES
Specifications:
Other Parts:
The optional PC Interface kits al-
lows: programming of advanced
features & alarms, datalogging,
real-time monitoring & system
diagnosis as well as batch pro-
gramming for multiple units. Sup-
plied with free software, Seri-
al:USB Converter and adaptor ca-
ble.
OEM Versions:
SmartBank PRO is available it’s
component parts for large volume
OEM customers. Also available are
custom looms, pre-programming
and your own specification of
plugs/sockets for integration into
existing wiring looms.
Supplied with 1x (twin battery bank
system) or 2x (triple battery bank
system) IP66 contactors.
IP66 Waterproof Emergency Parallel
Switch (Supplied). Multiple switches
can be supplied for where dual sta-
tion control may be required.
top related