smart implantology solutions - dental implants manufacturer · and production of advanced dental...

Smart Implantology Solutions

Index

Part A - Company Introduction – smart solutions

Part B - NanoTecTM Implant Surface

Part C - Internal Hex 2.5 mmd Implant System ATID, DFI, SPI, I.C.E.

Part D - Arrow Press Implants System ARRP, ARRC, ARPB

Part E – Biomaterials Line

Part F - Quality standards

Part G - Training and education center

2

Part A

Company Introduction

Alpha-Bio Tec specializes in development and production of advanced dental solutions, focusing on the field of implants and prosthetics.

Over 25 Years of Experience Worldwide

Established in 1988, Alpha-Bio Tec has been a spearhead in the world of implantology

A research and development team comprised of top experts in the field of dentistry

Developer of the SPI, the first, original Spiral Implant

Compliance with the world’s leading quality system standards

5

Alpha-Bio Tec – Company Structure

Israel

Headquarters

Innovative production facility

Domestic sales and customers support centers

Comprehensive training and educational center

International

Worldwide distribution array

Local sales and service centers in many countries worldwide

6

Alpha-Bio Tec Provides

Smart, simple solutions for a wide variety of surgical procedures

High quality products, developed to meet the needs of all professionals in the field of implantology.

Compliance with strict quality control systems

Proven, long term success

7

Simplicity is the ultimate sophistication

Lifetime Warranty for All Implants

Our Warranty- Your Peace of Mind Alpha-Bio Tec provides its customers

a Lifetime Warranty for its wide range of implants

8

Meeting the Needs Implantology Professionals

Implant Systems

Surgical Instrumentation

Prosthetics Systems

Biomaterials

9 9

10

3 Implant Systems - for All Situations

10

Internal Hex Implant System

Temporary Implants Arrow

Implant System

Trans gingival implants Arrow Press

Implant System

SPI DFI ATID I.C.E. ARRP ARRC ARB ARR

Prosthetics System

Comprehensive solutions for all restoration options:

Cement retained restoration

Screw retained restoration

Esthetic restoration

Zirconium

Overdenture restoration and fixation

AlphaLoc- Overdenture Attachments

Multi Unit for restoring highly angled implants

11

Prosthetics System

One platform for all implant diameters (SPI, I.C.E. DFI, ATID)

Allows the use of any abutment with any implant diameter as well as platform shifting

Wide platform abutments

For a full emergence profile when using 5 mmd or 6 mmd implants

© All rights reserved to Alpha-Bio Tec Ltd. 12

Surgical Instrumentation

Alpha-Bio Tec provides dentists with all the necessary tools for successful surgical procedures, from the basic surgical kit to advanced therapy tools.

13

Surgical kit - One Kit for All Systems

Made from high quality surgical stainless steel

Easy drill identification by color code

Grooved depth marks for better visibility

Diameter range from 2.0mm – 5.8mm.

Fit Alpha-Bio Tec's new recommended drill sequence

Improved twisted geometry for sharper cut

Internal and external irrigation available

14

Surgical Drills

Part B

Advanced Implant Surface

SEM of surface

Implant Surface Process

Sand-blasting to create a macro surface of 20-40 microns.

Double thermal acid etching process to create micro pitting between 1 to 5 microns.

16

Surface Advantages

Increased early bone to implant contact

Increased stability

Shortened healing period

Higher predictability

Retrospective clinical data shows an overall clinical success rate of 98.3% and a 99.6% clinical success rate when using the immediate loading procedure.

17

Excellent Bone-to-Implant Contact

Clinical Comparative Study on Sand Blasted, Acid Etched surface found that:

The histological analysis of the implants showed a good formation of bone, with clear “Contact Osteogenesis”, unequivocal sign of bone formation directly on the surface of the implant.

18

Rocci and Sennerby (2006)

Internal Hex Implant System

Part c

Coronal Part - Internal Hex Implants

Design Features:

• Micro rings

• Bone platform shifting

• Rough surface to the top

• Threads reaching the top of the implant

Advantages:

• Greater surface area

• Less crestal resorption

• Better load distribution

• Decreased crestal stress

20

No. of micro rings may vary

between various implants

and implant diameters.

SPI: Features

Tapered implant

Self drilling

Self tapping

Bone condensing properties

Suitable for all bone types

Excellent primary stability

Easy insertion

22

SPI: Indications

The spiral implant is indicated for all situations, bone types and surgical protocols:

Single missing tooth, partial edentulism, total edentulism

Upper and lower jaws, anterior and posterior regions

One stage and two stage surgical procedures

Closed and open sinus lift procedures

Simultaneous guided bone regeneration and/or splitting crest technique

Immediate implantation and immediate loading

23

SPI: Implant Body and Core

Design Features

• Tapered body

• Tapered core – more pronounced than the threads

• Osteotome like condensing body

Advantages:

• Increased primary stability

• Easy insertion

• Bone condensing

24

SPI: Implant Threads

Design Features

• Double thread design with 2.4 mm step

• Wide thread step

• Threads increase in the apical direction

Advantages:

• Easy insertion

• High primary stability

• Self drilling

• Self tapping

25

2.4 mm

2.4 mm 35º

SPI: Variable Threads Design

26

Thick square

threads Thinner square

threads Sharp V threads

Coronal Middle

Apical

Advantages:

• Easy insertion

• Bone condensing

• Increased primary stability

• Self drilling

• Self tapping

SPI: Variable Threads Design

The coronal threads condense the bone of the apical threads

27

1 2 3

3 2 1

SPI: Apical Part

Design features:

• Sharp and deep threads

• Narrow core

• Apical blades

• Straight apical border

• Condensing taper

Advantages:

• Self drilling

• Self tapping

• Easy insertion

• Helps prevent damage to anatomical structures

• Enables the implant to penetrate small diameter prepared sites

28

SPI: Clinical Advantages of Implant Design

Bone condensing property and very high primary stability.

Self-directing in line of insertion.

Enables changing direction for optimal restorative position.

Enables smaller osteotomy which results in minimal bone loss and reduced trauma.

Enables narrow ridge expansion.

Reduces the risk of damaging neighboring teeth.

Reduces the risk of perforating the lingual or buccal cortex.

29

Implant

Classical Esthetics

Discover True Innovation

31

Indications

Full arch restoration

Single-tooth (including molars) and multiple unit restoration

High primary stability in particular for soft bone type (III and IV)

Upper and lower jaws, anterior and posterior regions

One stage and two stage surgical procedures

Closed and open sinus lift procedures

Simultaneous guided bone regeneration and/or splitting crest technique

Immediate implantation and immediate loading

Excellent stress distribution due to the micro-threads design of the coronal area

32

I.C.E.: Coronal Part

Features: • Back-tapered (from Ø4.2mm diameter) • Micro threads with 4 split starts • Real, deep platform shifting • Split coronal macro thread

Advantages: • Greater BIC and surface area in the

cortical part • Improved stress distribution • Reduces pressure on cortical bone • Less crestal resorption • Long-term esthetic appearance

33

I.C.E.: Implant Body

Features: • Tapered body, both internally and

externally

• Osteotome like condensing body

Advantages:

• Smooth and gentle bone penetration

• High primary stability

• High bone condensation properties

34

I.C.E.: Implant Threads

Features: • Double thread design

with 2mm step • Variable thread design • 60° threads with 0.3 mm

trapezoid-based shape • Constant and deep

threads

Double Thread Design Variable Threads Design

60°

trapezoid-based Shape

Advantages: • Gentle insertion • Fast, controlled bone

penetration • Excellent bone grip • Moderate self-drilling

capability • Reduces pressure on

bone • High primary stability

35

I.C.E.: Apical Part

Features: • Very narrow apical part • Apical blades • Efficient cutting flute • Straight apical border • Sharp, deep apical

threads

Advantages: • Smooth initial penetration • Enables penetration into

prepared sites of smaller diameter (in bone types lll and IV)

• High primary stability (also in immediate implantation)

36

Narrow I.C.E.: 3.7Ø mm

Narrow version in 3.7Ø mm, lengths: 10 mm, 11.5 mm and 13 mm.

Advantages:

Flexibility in choosing diameters for narrow ridges.

Ease of implementation for challenging procedures using minimal surgery.

I.C.E.: Extra Short Implant Available

I.C.E. 6 mm is available in varying diameters: Ø 4.2 mm, Ø 4.65 mm, Ø 5.3 mm

Ultimate solution for posterior mandibular areas Perfect for vertically reduced ridges Ideal for clinical procedures performed in

proximity to the alveolar nerve Enables to prevent sinus lift surgery or

vertical bone augmentation

Sophisticated Design Simple and Easy to Use

DFI: Indications

The DFI implant is indicated for all situations, bone types and surgical protocols:

• Single missing tooth, partial edentulism, total edentulism

• Upper and lower jaws, anterior and posterior regions

• One stage and two stage surgical procedures

• Closed and open sinus lift procedures

• Simultaneous guided bone regeneration and/or splitting crest technique

• Limited vertical bone volume

39

DFI: Implant Body and Core

Design Features

• Slightly Tapered body

• Tapered core – more pronounced than the threads

Advantages:

• Primary stability

• Easy insertion

40

DFI: Implant Threads

Design Features

• Double thread design with 1.2 mm step

• Threads increase in the apical direction

Advantages:

• Easy insertion

• High primary stability

• Self drilling

• Self tapping

41

1.2 mm

1.2 mm

DFI: Variable Threads Design

42

Thick square

threads

Thinner square

threads

Sharp V threads

Coronal

Middle

Apical

Advantages:

• Easy insertion

• Bone condensing

• Increased primary stability

• Self drilling

• Self tapping

DFI: Variable Threads Design

The coronal threads condense the bone of the apical threads

43

1 2 3

3 2 1

DFI: Apical Part

Design features:

• Sharp threads

• Apical blades

• Straight apical border

• Cutting taper

Advantages:

• Self drilling

• Self tapping

• Easy insertion

• Helps prevent damage to anatomical structures

44

DFI: Clinical Advantages of Implant Design

Suitable for all bone types

Easy insertion and better control during placement

Bone condensing property and high primary stability

Self directing in line of insertion

Enables smaller osteotomy which results in minimal bone loss and reduces trauma

45

Cylindrical Implant

ATID: Indications

The ATID implant is indicated for all situations, bone types and surgical protocols:

• Single missing tooth, partial edentulism, total edentulism

• Upper and lower jaws, anterior and posterior regions

• Limited vertical bone volume

• Especially recommended for bone types I & II.

47

ATID: Implant Body and Core

Features:

• Straight wall, cylindrical implant

• Slightly tapered implant bottom

• Straight core

Advantages:

• Excellent for type I&II bone – no bone compression

• Easy insertion

48

ATID: Implant Body and Core

Features:

• Double thread design with 1.2 mm step

Advantages:

• Easy insertion

• Self drilling

• Self tapping

49

1.2 mm

1.2 mm

ATID: Variable Threads Design

Advantages:

• Easy insertion

• Bone condensing

• Increased primary stability

• Self drilling

• Self tapping

50

Thick square

threads Thinner square

threads Sharp V threads

Middle

Coronal

Apical

ATID: Variable Threads Design

The coronal threads condense the bone of the apical threads

51

1 2 3

3 2 1

ATID: Apical Part

features:

• Sharp threads

• Apical blades

• Straight apical border

• Cutting taper

Advantages:

• Self drilling

• Self tapping

• Easy insertion

• Helps prevent damage to anatomical structures

52

ATID: Extra Short Implants Available

Solution for reduced vertical height of bone

53

6 mm

Ø5 mm Ø6 mm

Clinical Advantages of Implant Design

Easy insertion and better control during placement

Excellent for type I & II bone

Suitable for use with limited bone volume, especially in the mandible

Reduces pressure on hard bone

54

Part D

Arrow Press Implant System

Trans-Gingival Implants

Arrow Press Implants Family

Trans-gingival gold colored titanium oxide coating:

• Allows biocompatibility

• Provides Excellent gingival tolerance

• Eliminates the grey shading of the gingival tissue

One piece implant (ARRP)

56

Arrow Press Implants - Body

Compressing threads for Immediate engagement

57

ARRP ARRC

ARRP: Features

Threaded one piece implant with an integrated abutment

Designed for single stage surgical procedure and cement restorations

Available in all diameters for all bone widths.

59

ARRP: Indications

All bone types

All bone widths

Small prosthetic spaces

Maxillary lateral incisors and mandibular incisors

Narrow alveolar ridges

60

ARRP: The Narrow Arrow Size comparison between

DFI 3.3 mm and ARRP 3.3 mm

The ARRP is narrower throughout the entire length of the implant, making it ideal for extremely narrow ridges.

61

3.75 mmd

2.7 mmd

Trans-Gingival Neck

The trans gingival neck can be placed at bone level or below

62

ARRP: Clinical Benefits

Self-tapping feature

Bone condensing property

High initial stability

Suitable for Immediate loading

63

ARRC: Features

Threaded implant

Designed for one or 2 stage surgical procedures and overdenture restorations

Can be restored with straight or angled abutments, or with ball attachment

65

ARRC: Indications

Small bone width (narrow bone)

Small prosthetic spaces

all bone types

Maxillary lateral incisors and mandibular incisors

Immediate and conventional loading of overdentures

66

ARRC: Clinical Benefits

Self-tapping feature

Bone condensing property

High initial stability

Suitable for Immediate loading

Maximal flexibility in rehabilitation options

67

ARRC Prosthetics

68

Ball Attachments

Casting

Abutment

Straight

Abutment

Angulated

Abutment

Part E Biomaterials Product Line

Simple solutions for complex cases

70

As part of Alpha-Bio Tec's commitment to providing implant dentistry a comprehensive array of solutions, Alpha-Bio's GRAFT offers simple, safe and reliable solutions for a wide range of clinical indications.

Product line includes:

• Natural Bovine Bone

• Allograft

• Synthetic Resorbable Bone

• Collagen Membrane

• Collagen Fleece

Bone Substitutes

Xenograft, natural bovine bone Synthetic, resorbable bone

71

Allografts – FDBA/DFDBA

Resorbable Membranes

Collagen membrane Collagen fleece

72

Biocryl membrane

Part F Quality Standards

Highest Quality Standards

Alpha-Bio Tec's Medical devices are:

• CE-approved

• Cleared for marketing in the USA

Alpha-Bio Tec complies with major quality system standards:

• ISO 13485:2003 including the Canadian Medical Devices Conformity Assessment System

• ISO 9001:2000

• Council Directive 93/42/EEC

FDA approval for immediate loading of single tooth for SPI and ARRP implants

74

Fatigue Test S/N Diagram

Dynamic fatigue test for endosseous dental implants according to ISO 14801: 2007 and FDA guidance.

Designed to simulate fatigue of the parts due to mastication forces over years of use.

Demonstrates the mechanical failure point and provides an important tool to the developers to improve the design.

75

Part G

Complete Package to Support Our Customers

Alpha- Bio Tec. Training and Education Center

Training and Education

A well equipped training & education center that provides a variety of comprehensive training courses

Highly experienced lecturers with both extensive clinical experience and teaching and lecturing experience

The center conducts international advanced courses

Lecturers from the center travel worldwide to provide International lectures and courses

78

Summary

Smart, simple solutions for all your needs

Advanced implant systems

Comprehensive service worldwide

Highest quality standards

© All rights reserved to Alpha-Bio Tec Ltd. 79

A Simple Way with a Global Say