rot equipment details rot equipment – unit consists of 1.2 meters dish antenna (now 90cms dia dish...

ROT Equipment Details

ROT Equipment – unit consists of • 1.2 Meters Dish antenna (Now 90cms dia dish also is suitable)• LNBC, Feed• IF Cables for Connecting link between Dish to STB• Set Top Box (STB/DVB) • Remote Control for STB• TV Set• Audio Video cable connectors• UPS & batteries (Optional) • Power board 

1

1.1/1.2 mts Dish Antenna

ROT Equipment Details

2

LNBC

3

SET TOP BOX/IRD – RG6 Cable and Connector

STB

RG6 Cables

4

Audio Video Cables

• RAC to RAC cable

5

GSAT -8 Satellite Technical Details

Technical Details are as follows:

Satellite Name : GSAT 8

Longitude : 55° East.

Downlink Frequency : 10968.375 MHz

Symbol Rate : 10851 MSPS

F E C : ½

Polarisation : Linear Vertical

6

ROTs REORIENTATION

Procedural Steps

• A) Power supply

• B) STB configuration

• C) Dish antenna orientation

A) Power supply:

Check power supply 230Volts A/C

TV set and STB turn on to the power supply

If UPS is functional ensure power supply to the power board.

7

ROTs REORIENTATION

B) STB Configuration:

Parameter Setting Procedure in IRD Go to the MENU mode /Press Menu button

Display

appears like

this on TV

8

ROTs REORIENTATION

• Press “MENU” button.

• Then Display appears.

9

ROTs REORIENTATION

• By using Left/Right and Up/Down Arrows Select “Installation” Sub-Menu.

• Press “OK”.

10

ROTs REORIENTATION

• Then display appears as

• Then select “LNB Setup” and press “OK”.

11

ROTs REORIENTATION

• Then display appears as

• Enter the satellite name and LNB Frequency low as “09750 MHz”.

12

ROTs REORIENTATION

• Then save the settings.

• Select “Satellite Setup”. Press “OK”.

13

ROTs REORIENTATION

Display appears as• Select and Enter The Trans. Freq. Symbol rate, LNB Polarity, FEC and then “Save”.• Select “Searching” and press “OK”.

14

ROTs REORIENTATION

• After Searching the channels are saved.

15

ROTs REORIENTATION

• The MANA TV channels programmes are received.

16

17