ricoh pentax cctv lenses catalog
Post on 15-Dec-2016
233 Views
Preview:
TRANSCRIPT
2013–2014FA Camera & Lens
CatalogueThe sales network – Expanding across the globe
Global Sales Network
Headquarters: JapanRICOH Company, Ltd. Shin-Yokohama OfficeIndustrial Optical Systems Division
Asia PacificHeadquarters: GermanyRICOH IMAGING DEUTSCHLAND GmbH
EuropeHeadquarters: U.S.ARICOH USA, INC.
Americas
For global environmental conservation, vegetable oil ink was used in this catalog.
http://www.ricoh.com/fa_security/
For inquiries concerning the products in this catalog, please contact us as shown below.
RICOH Company, Ltd. Imaging Systems Business Group, Industrial Optical Systems Division
For orders and inquiries:
The information in this catalog is current as of November 2013.
For safe product use •Carefully read the user guide and use the product correctly. •Use the correct power supply and voltage as indicated. •Do not install or use the products in locations with excessive water, humidity, steam, dust, smoke, etc. •Use a ground connection. In the event of a malfunction or short circuit, there is a danger of electric shock.
•Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association). QR Code is a registered trademark of Denso Wave Incorporated. •Other company names, product names, and logos mentioned herein are the registered trademarks or trademarks of their respective owners. •The appearance, specifications, and other aspects of the products are subject to change without notice for reasons such as improvement. •Product colors may vary slightly from the actual colors due to the printing process. •Please contact a sales representative for detailed information on performance, specifications, limitations, prices, etc.
http://www.ricoh.com/fa_security/RICOH home page Products Industrial Products FA・Security
More detailed product information is available on the RICOH FA・Security page.The following information is available in the Support section:● Download catalogs (PDF format)● Download the latest software for FA cameras● Download detailed user guides and product specifications for FA cameras● Contact information for product-related inquiriesFor further details on the above, check the RICOH homepage.
(Composite image)
Both foreground and background QR codes are readable.
Both the foreground and background are in focus, so there is no need to readjust the focus.
Keen eyes for manufacturing.
On the production floor, companies continue to seek ever greater safety, security, and product quality.
RICOH’s latest “keen eyes” were created to support such advances in reliable manufacturing.
These new series of high-quality factory automation (FA) cameras and lenses bring together all the camera
knowhow and optical technology that RICOH has developed over many years. Now, RICOH offers a new lineup of
Extended Depth of Field Cameras that no longer require you to readjust the focus and subject positions.
Moving forward, we will support even higher production-line efficiency and reliability by continuing to develop
the best high quality lenses optimised for FA cameras and by combining an extensive range of cameras and lenses
in a way that ensures a dependable image solution.
The new RICOH FV Series and RICOH FL Series.
An extensive line-up, in which it is possible to select camera and lens combinations. You can choose the optimum lens for the FA camera based on your requirements.
RICOH Extended Depth of Field Cameras
Industrial cameras that use a new algorithm so you never need to readjust the focus.
Image captured with conventional camera
Image captured with RICOH Extended Depth of Field Camera
Foreground QR code is unreadable.VGA >P03
2 Mega-Pixel >P04
short longfocal length
Cameras – RICOH FV SeriesCamera Link GigE Vision
2/3" format 2/3" format 2/3" format 2/3" format2/3" format
8 mm 16 mm 25 mm 50 mmMonochrome CCD
5 Mega-Pixel >P06
Lenses – RICOH FL Series
45 mm Image circle 45 mm Image circle
35 mm 50 mm
1" format 1" format
25 mm 78 mm
1/2" format 1/2" format 1/2" format1/2" format 2/3" format 1" format
2/3" format 2/3" format 1" format 2/3" format1" format
4.8 mm 8.5 mm 12.5 mm 12.5~75 mm25 mm
4.2 mm 6 mm 8~48 mm12 mm 16 mm 50 mmMonochrome CCD Monochrome CCD
1/3" format 1/3" format
VGA >P10>P08
2 Mega-Pixel >P09>P07
1/2" format
5 mm
2/3" format
6 mm
1/2" format
12 mm
2/3" format
16 mm
2/3" format
35 mm
2/3" format
75 mmMonochrome CCD
1/1.8" format 1/1.8" format
Monochrome CCD
1/1.8" format
Color CCD
Monochrome CCD
1/3" format
1/2" format 2/3" format 2/3" format 2/3" format2/3" format
6 mm 12 mm 25 mm 50 mm8 mm
1/1.8" format 1/1.8" format
12 mm 35 mm
1/3" format
8.5 mm
Line-Scan Lens >P18
UV Lens >P19
VGA >P16〜P17
5 Mega-Pixel >P11〜P12
2 Mega-Pixel >P13〜P15
RICOH Extended Depth of Field Camera Lensshort longfocal length
VGA >P04
GigE Vision
2 Mega-Pixel >P03
1/1.8" format
Monochrome CCD
RICOH Extended Depth of Field
Camera>P03〜P04NEW
(Composite image of EV-G030B1)01 02
1’’-32UNF (C-mount screw)
53.450
50 φ32
40
(Screw for Tripod) Depth 5
4-M4 Depth 4 (4 Directions)
22.518
12
7.5φ49
3. Input/output signal connectorHirose-made HR10A-10R-12PB equivalent
This connector is for power supply input and input/output signal.
Use Hirose-made HR 10A-10P-12S equivalent on cable side.
2. RJ45 connector Note: PoE type interface
1. DC Iris lens connector Note: Not functional on
this product
Even angled parts and subjects of varying heights can be captured with one shot when performing optical character recognition (OCR) and circuit board inspection.
Application example
1Application
example
2
■RICOH Extended Depth of Field Camera
The entire area for inspection is in focus, so one shot is enough.
■RICOH Extended Depth of Field Camera
The camera position remains fixed regardless of the height of the subject.
Unit: mm
■RICOH Extended Depth of Field Camera dimensions and rear connector specifications
■ Lenses compatible with RICOH Extended Depth of Field CameraLens model name
EL-HC1228-
2M
EL-HC1255-
2M
EL-CC3521-
2M
EL-CC3543-
2M
EL-CC3586-
2M
EL-CC0817B-
VG
EL-CC0833B-
VG
EL-CC0866B-
VGCam
era m
odel
EV-G200C1 ○ ○ ○ ○ ○ × × ×EV-G200B1 ○ ○ ○ ○ ○ × × ×EV-G030B1 ○ ○ ○ ○ ○ ○ ○ ○
Pin No. Signal name IN/OUT Specification Factory setting
1 GND — GND —2 Power input — +10.8 to +26.4 Vdc —3 Output 1 OUT Opt. Isolated Trigger action status signal output4 Output 2 OUT Opt. Isolated Exposure time signal output5 Output 3 OUT Opt. Isolated Open6 Output 4 OUT Opt. Isolated Open7 Output 5 OUT Opt. Isolated Open8 Input 1 IN Opt. Isolated TRG input9 Input 2 IN Opt. Isolated Open
10 Input 3 IN Opt. Isolated Open
11 Power input for I/O signal — IO VCC +3 to +26.4 Vdc —
12 GND for I/O signal — IO GND —
Comparison of depth of field and F number
EL-HC1228-2MEL-HC1255-2M
EL-CC3521-2MEL-CC3543-2MEL-CC3586-2M
EL-CC0817B-VGEL-CC0833B-VGEL-CC0866B-VG
Unit: mm
Dimensions
φ16.5
φ28.5
φ27, P=0.5
φ29.5
28.547.2 Unit: mm
Dimensions
φ19.5
φ28.5
φ27, P=0.5
φ29.5
35.4 46 Unit: mm
Dimensions
φ18
40 3.57
φ42
φ40.5, P=0.5
EV-G030B1
GigEVision
300,000pixels
EV-G200B1
GigEVision
2mega-pixels
EV-G200C1
GigEVision
2mega-pixels
color progressive CCD
EL-CC0817B-VG/EL-CC0833B-VGEL-CC0866B-VG Product specifications
EL-HC1228-2M/EL-HC1255-2M Product specificationsFocal length 12 mm
F number (fixed) 2.8(EL-HC1228-2M)5.5(EL-HC1255-2M)
Minimum object distance 0.25 mHorizontal angle of view
When mounted on EV-G030B1 21.6°When mounted on EV-G200B1 32.6°When mounted on EV-G200C1 32.4°
Dimensions φ29.5×28.5 mm
EL-CC3521-2M/EL-CC3543-2M/EL-CC3586-2M Product specifications
(For the options of RICOH extended field of view cameras, see p. 20.)
RICOH Extended Depth of Field Cameras
With a RICOH Extended Depth of Field Camera, shooting is easy!
Scale 100:100 Scale 100:100 Scale 100:100
400 500 600 700
B GR
IR cut filter
1.0
0.8
0.6
0.4
0.2
0.0
Relative Response[a.u.]
Wave Length[nm]
1.0
0.8
0.6
0.4
0.2
0.0400 500 600 700 800 900 1000R
elative Response[a.u.]
Wave Length[nm]
1.0
0.8
0.6
0.4
0.2
0.00 600 700 800 900 1000R
elative Response[a.u.]
Wave Length[nm]400 500
MTF*
* Modulation Transfer Function
Lower limit of MTF tolerance
MTF of conventional optical system
MTF of RICOH Extended Depth of Field Camera
Shooting distanceFocus position
Depth of field
Spectral sensitivity characteristics
Spectral sensitivity characteristics
Spectral sensitivity characteristics
The camera focus and position do not need to be adjusted even when capturing subjects of varying height, such as in processes with stacked printed paper.
■Conventional cameraThe camera focus is only on the center, so multiple shots are required for the foreground and background. Stitching of multiple images is also required.
■Conventional cameraThe camera height must be adjusted either by robotic arm or manually. The camera can focus on subjects with different
heights without having to be manually adjusted.
The camera position is adjusted to match the height of the subject.
1234 5 6
78
91011 12
Main specificationsEV-G200C1 EV-G200B1 EV-G030B1
Imager 1/1.8” interline UXGA color progressive CCD 1/1.8” interline UXGA monochrome progressive CCD 1/1.8” interline UXGA monochrome progressive CCDActive picture elements UXGA:1624 (H) × 1236 (V) VGA:648 (H) × 494 (V)Cell size 4.4 (H) × 4.4 (V) µm 7.4 (H) × 7.4 (V) µm
Vertical frequency (Frame rate)
15.31668 Hz (at full resolution)0.29261 to 61.26674 Hz adjustable via communication (max. frame rate depends on AOI setting)
Max. frame rate of camera (61.26674 Hz) is when vertical resolution is 230.
89.91172 Hz (at full resolution)0.72028 to 360.33325 Hz adjustable via communication
(max. frame rate depends on AOI setting)Max. frame rate of camera (360.33325 Hz) is
when vertical resolution is 104.Horizontal frequency 19.176 kHz 47.2028 kHzPixel frequency 36.818175 MHzMinimum scene illumination 7.27 lux at F1.2, 15.31668 Hz 0.16 lux at F1.2, 15.31668 Hz 0.58 lux at F1.2, 89.91172 HzSync System Internal syncVideo output format Digital 8-, 10- or 12-bit Raw data or RGB 8-bit Digital 8-, 10- or 12-bit Raw dataExposure time Preset continuous mode: 10 to 16,777,216 µs Preset trigger mode: 10 to 16,777,216 µs Pulse-width trigger mode: 10 µs to unlimitedGain 0 to 20.4 dBGamma Gamma 1.0 or uploadable to gamma table (selectable via communication)Power supply
Input voltage +10.8 to +26.4 VDC (power/signal connector or Power Over Ethernet) (automatic priority to power supply from power/signal connector)Consumption 6.8 W or less 6.5 W or less
Dimensions 50 (W) × 50 (H) × 53.5 (D) mm (not including connector)Lens mount C-mountWeight Approx. 170 gOperational temperature
Minimum -5℃Maximum Camera housing temperature should not exceed 70°C.
Storage temperature Ambient temperature -30 to 65°C
■ Foreground and background subjects are in focus, so there is no need to readjust the focus or the subject and camera positions.■ Each product in the series comprises of a special lens and GigE Vision™ camera with a special algorithm.■ Product line-up covers a wide range of focal lengths.■ Select from VGA (90 fps) and 2MP (15 fps).■ FPGA (Field Programmable Gate Array) enables image processing tailored to your imaging needs.■ Area of Interest (AOI*) Scan Mode enables efficient scanning for enhanced inspection speed and quality.
By combining a special optical system and new algorithm, Ricoh has succeeded in expanding the depth of field of its cameras. Subjects in both the foreground and background stay in focus, which is ideal for circuit board inspection and inspection in which subjects of varying sizes or depths along a line are captured.
Industrial cameras that use a new algorithm so you never need to readjust the focus.A fusion of Ricoh’s optical design and image-processing technology has resulted in a depth of field roughly three to five times that of previous models.(When compared using the same height. The extended depth of field effect varies depending on the subject pattern. For reference only.)
* Area of Interest: In this mode, only the area required for inspection is scanned and transferred, thereby reducing the data reading and transfer time. See p. 9 for details.
Focal length 35 mm
F number (fixed)2.1(EL-CC3521-2M)4.3(EL-CC3543-2M)8.6(EL-CC3586-2M)
Minimum object distance 0.4 mHorizontal angle of view
When mounted on EV-G030B1 7.5°When mounted on EV-G200B1 11.4°When mounted on EV-G200C1 11.4°
Dimensions φ29.5×35.4 mm
Focal length 8.5 mm
F number (fixed)1.7(EL-CC0817B-VG)3.3(EL-CC0833B-VG)6.6(EL-CC0866B-VG)
Minimum object distance 0.2 mHorizontal angle of view
When mounted on EV-G030B1 30.1°When mounted on EV-G200B1 —When mounted on EV-G200C1 —
Dimensions φ42×40 mm
No post- processing
required
Reduced number of
shots
Lower total cost
No equipment or manual work
required to reposition the camera
03 04
Pin No. Signal name IN/OUT Voltage
Low voltage High voltage1 GND IN 0V
2 I/O-1 IN/OUT IN 0 to +0.99V +2.3 to +3.3VOUT 0V +3.3V
3 I/O-2 OUT OUT 0V +3.3V4 I/O-3 OUT OUT 0V +3.3V5 I/O-4 OUT OUT 0V +3.3V6 +12 Vdc IN +12 Vdc
Spectral sensitivity characteristics
1.0
0.8
0.6
0.4
0.2
0.0350 450 550 650 750 850 950R
elative Response[a.u.]
Wave Length[nm]
FA cameras satisfying a diverse range of inspection needs.
The RICOH FV Series is a line of both Camera Link and GigE Vision
cameras matched to your resolution requirements.
In combination with our quality FL series lenses, these cameras support
high-precision manufacturing.
FA Camera Line UpIndustrial cameras: RICOH FV Series
FV-L500B15mega-pixels
CameraLink PoCL
5MP Camera Link with sturdy construction and compact design
■ 35 mm × 35 mm compact design■ Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface■ High-speed Frame rate of 5MP: 16 fps■ Various trigger modes (pulse width, edge preset trigger) as standard features■ In addition to camera tripod screw holes, M4 screw holes are located on four all sides■ For increased mounting precision, mounting holes are arranged based on the CCD’s optical axis■ Dual power alternatives, either PoCL or an external supply possible
Used for the inspection of displays, solder defects and high precision flaw detection of semiconductors, liquid crystal and plasma flat panel displays, circuit boards, etc.
■ [Exposure-interval signal output] emits the camera exposure interval enabling efficient inspection
[Supported cameras] FV-L500B1, FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
Exposure-interval signal output—which can start the next exposure during the transfer of the previous image—makes it possible to achieve high-speed work inspection*, thereby raising inspection efficiency. In addition, since the camera exposure interval is output externally, it can be used for various purposes. *Limited to cases where the next exposure does not end before the completion of image transfer.
Cameras supporting
exposure-interval signal output
Standard cameras CCD exposure
CCD exposure
Trigger signal
Trigger signal
Camera image output
Camera image output
Exposure starts during image transfer.The CCD exposure start marked with the ○ is speeded up, thereby making high-speed work detection possible
《 Camera Link ™ 》 5 Mega-Pixel Camera
FV-L500B1 Product specifications
Imager 2/3" interline 5.0 Mega pixels monochrome progressive CCD
Active picture elements 2448 (H) × 2058 (V)
Cell size 3.45 (H) × 3.45 (V) µm
Vertical frequency (Frame rate) 16 Hz
Horizontal frequency 33.264 kHz
Pixel frequency 64 MHz
Minimum scene illumination 0.24 lux at F1.2
Sync System Internal
Video output format Digital 8, 10 or 12 bit Raw Data (Base configuration)
Exposure time OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
Gain 0 to 18.309 dB
Gamma 1.0
Power supplyInput voltage DC 12 Vdc ± 10%
Consumption Less than 4.0 W
Dimensions 35 (W) × 35 (H) × 40.7 (D) mm (NOT Including the connector)
Lens mount C mount
Weight Approximately 80 g
EnvironmentalSpecifications
Operational temperature -5 to 40 deg. C
Storage temperature -30 to 65 deg. C
Dimensions and rear connector specifications
354-R3
35
φ36 0-0.05
22.7
2.3 4-M4 Depth4(4 Directions)
2.0 Depth 2.5 H7 (4 Directions)+0.010 0
17.69±0.02
15.5±0.0514.5±0.05
25±0.05
16.8±0.05
15±0.02 (R1)
1/4”20UNC(Screw for Tripod)Depth 5φ2.0 Depth2.5 H7 (4 Directions)+0.010
0
10.5
φ30
40.7
U1(C Mount Screw)
Unit: mm
B
A
Camera Link connector 3M-made SDR equivalentNote If the frame grabber board does not support PoCL,
please supply power (12 Vdc) from a power and input/output signal connector.
A
Input/output signal connector Hirose-made HR10A-7R-6PB equivalentTrigger signal input can be done in accordance with the camera setting. Optional connector RICOH FP-CN6PB is supported.
B
0605
Pin No. Signal name IN/OUT VoltageLow voltage High voltage
1 GND IN 0V
2 I/O-1 IN/OUT IN 0 to +0.5V +2.5 to +5.0VOUT 0V +3.3V
3 I/O-2 OUT OUT 0V +3.3V4 I/O-3 OUT OUT 0V +3.3V5 I/O-4 OUT OUT 0V +3.3V6 +12 Vdc IN +12 Vdc
Pin No. Signal name IN/OUT VoltageLow voltage High voltage
1 GND IN 0V
2 I/O-1 IN/OUT IN 0 to +0.5V +2.5 to +5.0VOUT 0V +3.3V
3 I/O-2 OUT OUT 0V +3.3V4 I/O-3 OUT OUT 0V +3.3V5 I/O-4 OUT OUT 0V +3.3V6 +12 Vdc IN +12 Vdc
1.0
0.8
0.6
0.4
0.2
0.0350 450 550 650 750 850 950R
elative Response[a.u.]
Wave Length[nm]
PoCLCameraLink
FV-L200B12mega-pixels
2MP Camera Link with pre-processing functions
■ High-speed Frame rate of 2MP: 15 fps■ Ultra-compact 28 mm × 28 mm CCD camera among the smallest in the industry■ Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface■ Camera contains automatic control functions for gain and shutter■ Various trigger modes (pulse width, edge preset trigger) as standard features■ Image processing with an on-board lookup table possible in the camera■ M4 screw holes are located on four sides Sturdy construction for increased mounting precision■ Dual power alternatives, either PoCL or an external supply possible
Handles a wide range of inspection uses, such as positioning prior to liquid crystal glass processing, circuit board mounted component checks and mounting inspection, automotive component flaw detection, medicine tablet inspection, etc.
■ [Strobe signal output] enables user adjustment of exposure and the timing of light emission
[Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
Incorporating a strobe signal output (LVCMOS level) function for light emission use. With this function, it is possible for the user to adjust the camera exposure timing (delay, time) and light emission timing (delay, time) in accordance with the trigger input signal received by the camera.
Spectral sensitivity characteristics
After strobe signal output
setting
Electronic shutter
Electronic shutterStrobe emission timing Strobe and exposure timing adjustment possible
Before strobe signal output
settingStrobe
Strobe
Trigger signal
Trigger signal
CCD exposure
CCD exposure
《 Camera Link ™ 》 2 Mega-Pixel Camera
FV-L200B1 Product specifications
Imager 1/1.8" interline UXGA monochrome progressive CCD
Active picture elements UXGA: 1620 (H) × 1236 (V)
Cell size 4.4 (H) × 4.4 (V) µm
Vertical frequency (Frame rate)
3.8599(3.8fps)/ 7.7198(7.6fps)/ 15.4397(15.3fps)Hzin partial full scanning (default scanning mode)
Horizontal frequency 4.794(3.8fps)/ 9.588(7.6fps)/ 19.176(15.3fps)kHz
Pixel frequency 9.2045(3.8fps)/ 18.4091(7.6fps)/ 36.8181(15.3fps)MHz
Minimum scene illumination 0.1 lux at F1.2
Sync System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data (Base configuration)
Exposure timeOFF, 1 to 1/30,000 sec. (Variable at every H and clock) (3.8fps)OFF, 1/2 to 1/60,000 sec. (Variable at every H and clock) (7.6fps)OFF, 1/4 to 1/120,000 sec. (Variable at every H and clock) (15.3fps)
Gain 0 to 27 dB
Power supplyInput voltage DC 12 Vdc ± 10%
Consumption Less than 3.0 W
Dimensions 28 (W) × 28 (H) × 40 (D) mm (NOT Including the connector)
Lens mount C mount
Weight Approximately 43 g
Environmental specifications
Operational temperature -5 to 50 deg. C
Storage temperature -30 to 65 deg. C
Dimensions and rear connector specifications
4-M4 Depth 4.5
12
28 10.5
40
14.5
14.5 22
3-M2 Depth 3.5
U1(C Mount Screw)
3-M2 Depth 3.5
47.3
3-M2 Depth 3.5(Both Sides)
14.5 22
20
2-M4 Depth 4.5
2-M4 Depth 4.5(Both Sides)222329.5
28 1220121320
6.1
5.4
5.4 B
A
Unit: mm
Camera Link connector 3M-made SDR equivalentNote If the frame grabber board does not support PoCL,
please supply power (12 Vdc) from a power and input/output signal connector.
A
Input/output signal connector Hirose-made HR10A-7R-6PB equivalentTrigger signal input can be done in accordance with the camera setting. Optional connector RICOH FP-CN6PB is supported.
B
《 Camera Link ™ 》 VGA Camera
PoCL
FV-L030B1300,000
pixelsCamera
Link
VGA Camera Link with pre-processing functions
■ High-speed Frame rate of VGA: 90 fps■ Ultra-compact 28 mm × 28 mm CCD camera among the smallest in the industry■ Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface■ Camera contains automatic control functions for gain and shutter■ Various trigger modes (pulse width, edge preset trigger) as standard features■ Image processing with an on-board lookup table possible in the camera■ M4 screw holes are located on four sides Sturdy construction for increased mounting precision■ Dual power alternatives, either PoCL or an external supply possible
Suitable for uses such as component alignment, positioning, simple direction determination before component processing, taping and mounted device part presence/absence confirmation, etc.
■ [Lookup table (gamma curve)] enables luminance settings at all gradients for creation of finely detailed images
[Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
On a camera with pre-processing functions, it is possible to correct luminance at all gradients using an on-board lookup table prepared by the user based on subject characteristics and inspection objectives. This also reduces the burden on the PC’s CPU and increases processing speed. In addition, the lookup table can be prepared as a CSV file and uploaded.(For pre-processing functions, see p. 10.)
Spectral sensitivity characteristics
1.0
0.8
0.6
0.4
0.2
0.0350 450 550 650 750 850 950R
elative Response[a.u.]
Wave Length[nm]
Outputluminance
Outputluminance
Two values Three values Outputluminance
User can set luminance at all gradients
Emphasize low luminance Emphasize high luminance Emphasize medium luminance Emphasize a specific luminance
Outputluminance
Input luminance
Input luminance
Input luminance
Input luminance
4-M4 Depth 4.5
12
28 10.5
40
14.5
14.5 22
3-M2 Depth 3.5
U1(C Mount Screw)
3-M2 Depth 3.5
47.3
3-M2 Depth 3.5(Both Sides)
14.5 22
20
2-M4 Depth 4.5
2-M4 Depth 4.5(Both Sides)222329.5
28 1220121320
6.1
5.4
5.4 B
A
Unit: mm
Dimensions and rear connector specifications
Camera Link connector 3M-made SDR equivalentNote If the frame grabber board does not support PoCL,
please supply power (12 Vdc) from a power and input/output signal connector.
A
Input/output signal connector Hirose-made HR10A-7R-6PB equivalentTrigger signal input can be done in accordance with the camera setting. Optional connector RICOH FP-CN6PB is supported.
B
FV-L030B1 Product specifications
Imager 1/3" interline VGA monochrome progressive CCD
Active picture elements VGA: 648 (H) × 494 (V)
Cell size 7.4 (H) × 7.4 (V) µm
Vertical frequency (Frame rate)
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hzin partial full scanning (default scanning mode)
Horizontal frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Pixel frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
Minimum scene illumination 0.4 lux at F1.2
Sync System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data (Base configuration)
Exposure timeOFF, 1/3 to 1/40,000 sec. (Variable at every H and clock) (30fps)OFF, 1/7 to 1/80,000 sec. (Variable at every H and clock) (60fps)OFF, 1/11 to 1/120,000 sec. (Variable at every H and clock) (90fps)
Gain 0 to 27 dB
Power supplyInput voltage DC 12 Vdc ± 10%
Consumption Less than 2.7 W
Dimensions 28 (W) × 28 (H) × 40 (D) mm (NOT Including the connector)
Lens mount C mount
Weight Approximately 43 g
Environmental specifications
Operational temperature -5 to 50 deg. C
Storage temperature -30 to 65 deg. C
07 08
Pin No. Signal name IN/OUT Voltage1 GND IN 0V2 I/O-1 OUT +3.3V LVTTL3 I/O-2 OUT +3.3V LVTTL
4 TRIGGER_In- IN Low: +1.0V 以下 (Opt. lsolated-)High: +3.0V to +26.4V (Opt. lsolated+)
Note: potential difference between TRG_In- and TRG_In+5 TRIGGER_In+ IN
6 POWER IN IN +10.8 to +26.4 Vdc
《 GigE Vision ™ 》 VGA Camera《 GigE Vision ™ 》 2 Mega-Pixel Camera
Pin No. Signal name IN/OUT Voltage1 GND IN 0V2 I/O-1 OUT +3.3V LVTTL3 I/O-2 OUT +3.3V LVTTL
4 TRIGGER_In- IN Low: Smaller than +1.0V (Opt. Isolated -)High: +3.0 to 26.4V (Opt. Isolated +)
Note: potential difference between TRG_In- and TRG_In+5 TRIGGER_In+ IN
6 POWER IN IN +10.8 to +26.4 Vdc
1.0
0.8
0.6
0.4
0.2
0.0350 450 550 650 750 850 950R
elative Response[a.u.]
Wave Length[nm]
1.0
0.8
0.6
0.4
0.2
0.0350 450 550 650 750 850 950R
elative Response[a.u.]
Wave Length[nm]
GigEVision
GigEVision
FV-G030B1FV-G200B12mega-pixels
300,000pixels
FV-G200B1 Product specifications
Imager 1/1.8" interline UXGA monochrome progressive CCD
Active picture elements UXGA: 1624 (H) × 1236 (V)
Cell size 4.4 (H) × 4.4 (V) µm
Vertical frequency (Frame rate)
15.31668 Hz at full resolution0.29261 to 61.26674 Hz adjustable via the communication
(Frame rate depends on the AOI setting)Maximum Frame rate (61.26674 Hz) is when vertical resolution AOI setting is 232.
Horizontal frequency 19.1761 kHz
Pixel frequency 36.8181 MHz
Minimum scene illumination 0.16 lux at F1.2, 15.31668 Hz
Sync System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data
Exposure timePreset continuous mode: 1 μsecond to 16,777,215 μseconds
Preset trigger mode: 1 μsecond to 16,777,215 μsecondsPulse width mode: 1 μsecond to Unlimited
Gain 0 to 20.4 dB
Gamma Gamma 1.0 (Factory default) or uploadable gamma table
Power supplyInput voltage + 10.8 to 26.4 Vdc
Consumption Less than 5.0 W
Dimensions 35 (W) × 35 (H) × 50.8 (D) mm (NOT Including the connector)
Lens mount C mount
Weight Approximately 120 g
Operational temperature
Minimum Environmental temperature -5 deg. C
Maximum Camera housing temperature (top plate) shall not exceed 65℃(This corresponds to an environmental temperature of approximately 35℃)
Storage temperature Environmental temperature -30 to 65 deg. C
FV-G030B1 Product specifications
Imager 1/3" interline VGA monochrome progressive CCD
Active picture elements VGA : 648 (H) × 494 (V)
Cell size 7.4 (H) × 7.4 (V) µm
Vertical frequency (Frame rate)
89.91172 Hz at full resolution0.72028 to 360.33325 Hz adjustable via the communication
(Frame rate depends on the AOI setting)Maximum Frame rate (360.33325 Hz) is when vertical resolution AOI setting is 104.
Horizontal frequency 47.2028 kHz
Pixel frequency 36.8181 MHz
Minimum scene illumination 0.58 lux at F1.2, 89.91172 Hz
Sync System Internal
Video output format Digital 8, 10 or 12 bit Raw data
Exposure timePreset continuous mode: 10 μseconds to 16,777,215 μseconds
Preset trigger mode: 10 μseconds to 16,777,215 μseconds Pulse width mode: 10 μseconds to Unlimited
Gain 0 to 20.4 dB
Gamma Gamma 1.0 (Factory default) or uploadable gamma table
Power supplyInput voltage + 10.8 to 26.4 Vdc
Consumption Less than 5.0 W
Dimensions 35 (W) × 35 (H) × 50.8 (D) mm (NOT Including the connector)
Lens mount C mount
Weight Approximately 120 g
Operational temperature
Minimum Environmental temperature -5 deg. C
Maximum Camera housing temperature (top plate) shall not exceed 65℃(This corresponds to an environmental temperature of approximately 35℃)
Storage temperature Environmental temperature -30 to 65 deg. C
■ [AOI* scan mode] raises inspection quality and speed with efficient scanning
[Supported cameras] FV-G200B1, FV-G030B1
AOI scan mode handles high-speed inspection. The user can freely define the start line and width of the image data. By scanning images of only the necessary portions, it is possible to transfer only the Images required. This, in turn, makes it possible to do speedy inspections by shortening the time required for reading and transferring data.*Area of Interest
■ [Pre-processing functions] reduce PC processing burden and increase image processing performance
[Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
On models with pre-processing functions, the camera incorporates the var ious image processing functions as shown below. Compared to cameras where there is an intervening board, it is possible to reduce the PC’s CPU burden and increase the transfer speed.
Spectral sensitivity characteristics
Spectral sensitivity characteristics
Pre-processing functions and 2MP GigE Visionfor a wide range of uses
■ High-speed Frame rate of 2MP: 15 fps■ High image quality with a CCD global shutter■ Camera contains automatic control functions for gain and shutter■ Various scan modes (full, AOI) as standard features■ Various trigger modes (pulse width, edge preset trigger) as standard features■ Supports DC iris lens so also excellent for outdoor monitoring uses■ Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)■ Supports updating of camera firmware via Ethernet■ In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom) Sturdy construction for increased mounting precision
Suitable for diverse inspection uses, including positioning before each process in screen printing, circuit board mounted device part checks, automotive component flaw detection, etc. Also excellent for outdoor monitoring uses.
Pre-processing functions and VGA GigE Visionfor a wide range of uses
■ High-speed Frame rate of VGA: 90 fps■ High image quality with a CCD global shutter■ Camera contains automatic control functions for gain and shutter■ Various scan modes (full, AOI) as standard features■ Various trigger modes (pulse width, edge preset trigger) as
standard features■ Supports DC iris lens so also excellent for outdoor monitoring uses■ Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)■ Supports updating of camera firmware via Ethernet■ In addition to camera tripod screw holes, M4 screw holes are located on
two sides (top and bottom) Sturdy construction for increased mounting precision
Handles a wide range of inspections, including monochrome image measurement, defect checking, etc. Suitable for applications involving installation in various types of devices that make up a machine vision system.
A
B
C
4-M4 Depth 415.5±0.05
14.5±0.05
16.8±0.05
25±0.05
35
30.2
35
(55.3)50.8
4-R3φ36 0-0.05
1/4”20UNC(Screw for Tripod)Depth 4.5
10.5
U1(C Mount Screw)
φ31
Unit: mm
Dimensions and rear connector specifications
RJ45 connectorNote Not PoE type. Power provided separately from .
A
DC iris lens connector M1951 (EMUDEN-made) equivalentNote For details, see product specifications.
B
Input/output signal connector Hirose-made HR10A-7R-6PB equivalentPower input and input/output signal input can be done.Optional connector RICOH FP-CN6PB is supported.
C
C
A
B
C
4-M4 Depth 415.5±0.05
14.5±0.05
16.8±0.05
25±0.05
35
30.2
35
(55.3)50.8
4-R3φ36 0-0.05
1/4”20UNC(Screw for Tripod)Depth 4.5
10.5
U1(C Mount Screw)
φ31
Unit: mm
Dimensions and rear connector specifications
Transfer time reduced by sending only areas necessary for inspection
②Eliminate additional unnecessary areas
Image sensor image data
①Eliminate hatched areas
▲ ▲
Standard cameras
Camera
PC
High CPU burdenAll imageprocessing doneby PC
Lens
▲
Camera with pre-processing functions
Some image processing done by camera
Camera
PC
Low CPU burden
Lens
▲
● [Lookup table] enables finely detailed image creation. (See p. 8.)
● [AGC (auto gain control)] enables automatic gain adjustment in camera● [Auto electronic shutter control] automatically controls the shutter in response to changes in subject light intensity
A
DC iris lens connector M1951 (EMUDEN-made) equivalentNote For details, see product specifications.
B
Input/output signal connector Hirose-made HR10A-7R-6PB equivalentPower input and input/output signal input can be done. Optional connector RICOH FP-CN6PB is supported.
C
RJ45 connectorNote Not PoE type. Power provided separately from .C
09 10
5 Mega-Pixel Lens (Manual Iris Lens, compatible with 5 mega-pixel cameras)
Format size 2/3" formatFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22Mount CMin.~Max. Magnification 0.15~0.23×
Horizontalangle of view
1/3" format 32~21 mm1/2" format 43~28 mm1/1.8" format 48~31 mm2/3" format 59~38 mm
Working distance 361~242 mmBack focal length 30.43~34.54 mmFilter size 52 P=0.75 mmDimensions φ63.2×92.6 mmWeight 560 g
Remarks Focus & Iris lock screws. 5 mega pixel (2/3"format) / 4 mega pixel (1.1"format)
FL-CC5028A-5M02 Product specifications
FL-CC5028A-5M02
30.617.526
106.1(Max.)
99.3(Min.)4
φ52, P=0.75
φ60φ55
φ30
φ59.5
φ63.2
Unit: mm
Dimensions
Format size 2/3" formatFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22Mount CMin.~Max. Magnification 0.28~0.4×
Horizontalangle of view
1/3" format 17~12 mm1/2" format 23~16 mm1/1.8" format 26~18 mm2/3" format 31~22 mm
Working distance 201~146 mmBack focal length 37.16~43.29 mmFilter size 52 P=0.75 mmDimensions φ63.2×99.3 mmWeight 580 g
Remarks Focus & Iris lock screws. 5 mega pixel (2/3"format) / 4 mega pixel (1.1"format)
FL-CC5028A-5M035 Product specifications
FL-CC5028A-5M035
FL-CC0814-5M
Format size 2/3" formatFocal length 8 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 32.9°1/2" format 43.2°1/1.8" format 48.2°2/3" format 57.8°
Minimum object distance 0.1 mBack focal length 11.5 mmFilter size 58 P=0.75 mmDimensions φ60.8×64 mmWeight 260 gRemarks Focus & Iris lock screws
FL-CC0814-5M Product specifications
1-32UN-2A
φ22
17.52664
7
4
φ58、 P=0.75
φ60.8
φ43
Dimensions
Unit: mm
φ52, P=0.75
φ60
φ30
φ59.5
φ63.2
φ55
25.817.526
99.4(Max.)92.6(Min.)
4
Unit: mm
Dimensions
1-32UN-2A
φ22
17.52644
7
4
φ40.5、 P=0.5
φ43
Dimensions
Format size 2/3" formatFocal length 25 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 11.0°1/2" format 14.6°1/1.8" format 16.4°2/3" format 19.9°
Minimum object distance 0.1 mBack focal length 12.3 mmFilter size 40.5 P=0.5 mmDimensions φ43×44 mmWeight 130 gRemarks Focus & Iris lock screws
FL-CC2514-5M Product specifications
FL-CC2514-5M
Unit: mmScale 40:100
Scale 100:100
Scale 40:100 Scale 40:100
φ43
47 17.526
φ40.5、 P=0.5
1-32UN-2A
φ22
7.5
4
Dimensions
FL-CC1614-5M
Unit: mmScale 40:100
Format size 2/3" formatFocal length 16 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 17.1°1/2" format 22.7°1/1.8" format 25.4°2/3" format 30.8°
Minimum object distance 0.1 mBack focal length 11.5 mmFilter size 40.5 P=0.5 mmDimensions φ43×47 mmWeight 140 gRemarks Focus & Iris lock screws
FL-CC1614-5M Product specifications
FA Lens Line UpFor each resolution level (5MP, 2MP, and VGA), the RICOH FL Series providesan extensive line of high-performance lenses with different focal lengths and sensor sizes. Knowhow developed in our camera operations has been put to good use in creating high-quality products with an extremely low level of variation among individual lenses.
Lenses for Machine Vision – RICOH FL Series
FA lenses for use with 5 mega-pixel resolution and image processingThere are five types, beginning with an 8 mm focal length close-up lensThese manual iris lenses support 5 mega-pixels (2/3" format). They are perfect for inspection, pattern matching, and alignment uses in which images with high definition from edge to edge definition are needed for large subjects such as wafers, chip mounters, board mounting, etc.
■ High resolution and high contrastSupports 2/3" format, 5 mega-pixel CCD camera with 3.45 μm pixel pitch. Achieves 140 lp/mm high resolution from center to periphery. Produces sharp, high-clarity images with high-contrast and low resolution loss all the way to the edge.
■ φ43 mm compact designConsistent with the 44 mm-square cases used by many 5 mega-pixel cameras, we have achieved a size reduction to φ43 mm for the outer diameter. These lenses are an excellent choice for installation on high-performance devices.
■ Extremely small level of optical distortionFor both the FL-CC2514-5M and the FL-CC1614-5M, optical distortion on the diagonals is less than 1%. TV distortion is held to less than 0.2%. The resulting extremely low-distortion images are also excellent for use in the image measurement field.
■ Bright to the peripheryDespite the Φ43 mm diameter, the optics accommodate 5 mega-pixels with F1.4 brightness. With peripheral-light-intensity falloff held to an absolute minimum, it is possible to obtain bright and high-resolution images. Although they are wide-angle lenses, with the iris open we were able to raise the peripheral light level to 70% (diagonals) and thereby achieve images that are bright and clear all the way to the periphery.
FL-CC1614-5M peripheral light intensity
In these lenses for 5 mega-pixel use, we worked to further raise peripheral light intensity.
FL-CC1614-2M peripheral light intensity
In past mega-pixel lenses, a certain amount of light-intensity falloff can be seen at the periphery.
Peripheral light intensity comparison
Peripheral light intensity (%)WD=250 mm
Image height (mm)
100
50
FL-CC1614-5MFL-CC1614-2M
00.0 2.5 5.0
Wi th pe r iphe ra l - l i gh t -intensity falloff held to an absolute minimum, it is possible to obtain bright and high-resolution images.
11 12
2 Mega-Pixel Lens (Manual Iris Lens, compatible with 2 mega-pixel cameras)
Format size 1/2" formatFocal length 6 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 44.5°1/2" format 57.4°1/1.8" format —2/3" format —
Minimum object distance 0.1 mBack focal length 12.32 mmFilter size —Dimensions φ32×37.5 mmWeight 58 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 16 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 17.1°1/2" format 22.7°1/1.8" format 25.5°2/3" format 31.0°
Minimum object distance 0.25 mBack focal length 14.61 mmFilter size 27 P=0.5 mmDimensions φ29.5×33.2 mmWeight 63 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 16 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 17.1°1/2" format 22.6°1/1.8" format 25.3°2/3" format 30.7°
Minimum object distance 0.1 mBack focal length 10.7 mmFilter size 27 P=0.5 mmDimensions φ29.5×32.2 mmWeight 54 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 6 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 42.6°1/2" format 55.1°1/1.8" format 60.8°2/3" format 71.2°
Minimum object distance 0.1 mBack focal length 10.9 mmFilter size —Dimensions φ48×59.9 mmWeight 149 gRemarks Focus & Iris lock screws
417.52645.5
φ44.5
φ32φ20
3
(IN AIR)
Unit: mm
FL-HC0514-2M
Dimensions
FL-CC0614A-2M
7.1
φ48
59.9
4
φ40
φ22.2
Unit: mm
Dimensions
FL-CC0614A-2M Product specifications
Scale 80:100
Scale 80:100
FL-HC0614-2M
Unit: mm
Dimensions
FL-HC0614-2M Product specifications
Scale 80:100
φ32
φ22
1-32UN
φ29
1.946.537.5 17.526 32.2
4
7.6
φ29.5
φ27 P=0.5
φ19.7
Unit: mm
FL-CC1614A-2M
Dimensions
FL-CC1614A-2M Product specifications
Scale 80:100
45.7
4
8
φ29.5
φ19.7
Unit: mm
Dimensions
FL-CC1214A-2M Product specifications
Scale 80:100
Unit: mm(IN AIR)28.2
0.8
17.5264
φ33.5
φ32
φ18φ32
FL-CC1214-2M
Dimensions
Format size 2/3" formatFocal length 12 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 22.7°1/2" format 30.0°1/1.8" format 33.5°2/3" format 40.4°
Minimum object distance 0.15 mBack focal length 13.1 mmFilter size 30.5 P=0.5 mmDimensions φ33.5×28.2 mmWeight 62 gRemarks Focus & Iris lock screws
FL-CC1214-2M Product specifications
Scale 80:100
φ42
φ22.2
36.7 7.34
φ40.5 P=0.5
φ35
Unit: mm
FL-CC0814A-2M NEW
NEW
FL-CC1214A-2M NEW
NEW
Dimensions
Scale 80:100
φ28.5
φ27, P=0.5
φ29.5
33.2 4
Unit: mm
FL-CC1614-2M
Dimensions
FL-CC1614-2M Product specifications
Scale 80:100
FL-CC0814-2M
28.2 17.5264
(IN AIR)
φ18φ32
0.6
φ33.5
φ32
Unit: mm
Dimensions
FL-CC0814-2M Product specifications
Scale 80:100
FL-HC1214-2M
φ16.5
φ28.5
φ27, P=0.5
φ29.5
28.547.2
Format size 1/2" formatFocal length 12 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 21.9°1/2" format 28.9°1/1.8" format —2/3" format —
Minimum object distance 0.25 mBack focal length 11.50 mmFilter size 27 P=0.5 mmDimensions φ29.5×28.5 mmWeight 55 gRemarks Focus & Iris lock screws
Unit: mm
Dimensions
FL-HC1214-2M Product specifications
Scale 80:100
Format size 1/2" formatFocal length 5 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 51.4°1/2" format 65.5°1/1.8" format —2/3" format —
Minimum object distance 0.1 mBack focal length 10.8 mmFilter size 43 P=0.75 mmDimensions φ44.5×45.5 mmWeight 102 gRemarks Focus & Iris lock screws
FL-HC0514-2M Product specificationsFormat size 2/3" formatFocal length 12 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 22.1°1/2" format 29.2°1/1.8" format 32.7°2/3" format 39.4°
Minimum object distance 0.1 mBack focal length 10.7 mmFilter size —Dimensions φ29.5×45.7 mmWeight 68 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 8 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 32.4°1/2" format 42.5°1/1.8" format 47.3°2/3" format 56.3°
Minimum object distance 0.1 mBack focal length 13.1 mmFilter size 30.5 P=0.5 mmDimensions φ33.5×28.2 mmWeight 63 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 8 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 32.6°1/2" format 42.7°1/1.8" format 47.4°2/3" format 56.3°
Minimum object distance 0.1 mBack focal length 11.1 mmFilter size 40.5 P=0.5 mmDimensions φ42×36.7 mmWeight 76 gRemarks Focus & Iris lock screws
FL-CC0814A-2M Product specifications
■ High-performance lenses for close-up imaging with 2 mega-pixel CCD and CMOS sensors
■ Sharp high resolution, high contrast images, that limitresolution loss from the center to periphery
■ With compact size, light weight, and durability, these are excellent lenses for FA and machine vision use
■ They greatly reduce distortion that causes problems in image measurement and recognition
■ Built to handle environments with vibration, etc. Easy to use, reliable focus and iris locking mechanisms as standard features
A wide line-up of 2/3”-format lenses for use with 2 MP cameras for a variety of applications.Choose the optimal lens for your requirements.These manual-iris lenses are your best choice for image processing data capture at 2 mega-pixels. With their compact size and high performance, they deliver great results for high-precision manufacturing inspection(chip mounters, wafers, electronic substrates, etc.).
13 14
FL-HC0416X-VG
FL-HC1212B-VG
φ42
φ15
43.5 3.5
7.4
Unit: mm
Dimensions
35.5 3.8
φ30
φ27, P=0.5
Unit: mm
Dimensions
FL-HC0612A-VG
46 3.5
φ42
φ40.5, P=0.5
Unit: mm
Dimensions
FL-HC0612A-VG Product specificationsFormat size 1/2" formatFocal length 6 mmMaximum aperture ratio 1 : 1.2Iris range 1.2~CloseMount C
Horizontal angle of view
1/3" format 43.4°1/2" format 56.8°
1/1.8" format —2/3" format —
Minimum object distance 0.2 mBack focal length 14.31 mmFilter size 40.5 P=0.5 mmDimensions φ42×46 mmWeight 125 g
Remarks Focus & Iris lock screws
FL-HC0416X-VG Product specificationsFormat size 1/2" formatFocal length 4.2 mmMaximum aperture ratio 1 : 1.6Iris range 1.6~CloseMount C
Horizontal angle of view
1/3" format 64.0°1/2" format 86.4°
1/1.8" format —2/3" format —
Minimum object distance 0.2 mBack focal length 10.42 mmFilter size —Dimensions φ42×43.5 mmWeight 120 g
Remarks Iris lock screws, Fixed focus
FL-HC1212B-VG Product specificationsFormat size 1/2" formatFocal length 12 mmMaximum aperture ratio 1 : 1.2Iris range 1.2~22Mount C
Horizontal angle of view
1/3" format 22.6°1/2" format 30.2°
1/1.8" format —2/3" format —
Minimum object distance 0.2 mBack focal length 13.87 mmFilter size 27 P=0.5 mmDimensions φ30×35.5 mmWeight 67 g
Remarks Focus & Iris lock screws
FL-CC0418DX-VG Product specificationsFormat size 2/3" formatFocal length 4.8 mmMaximum aperture ratio 1 : 1.8Iris range 1.8~CloseMount C
Horizontal angle of view
1/3" format 54.6°1/2" format 71.6°
1/1.8" format 79.8°2/3" format 95.4°
Minimum object distance 0.3 mBack focal length 9.71 mmFilter size —Dimensions φ40.5×35.5 mmWeight 105 g
Remarks Iris lock screws, Fixed focus
FL-CC0815B-VG Product specificationsFormat size 2/3" formatFocal length 8.5 mmMaximum aperture ratio 1 : 1.5Iris range 1.5~CloseMount C
Horizontal angle of view
1/3" format 31.9°1/2" format 42.1°
1/1.8" format 47.0°2/3" format 56.5°
Minimum object distance 0.2 mBack focal length 10.88 mmFilter size 40.5 P=0.5 mmDimensions φ42×40 mmWeight 120 g
Remarks Focus & Iris lock screws
FL-CC1614A-VG Product specificationsFormat size 2/3" formatFocal length 16 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~22Mount C
Horizontal angle of view
1/3" format 16.9°1/2" format 22.5°
1/1.8" format 25.2°2/3" format 30.7°
Minimum object distance 0.3 mBack focal length 13.22 mmFilter size 27 P=0.5 mmDimensions φ30×33 mmWeight 58 g
Remarks Focus & Iris lock screws
FL-CC0418DX-VG
Unit: mm
Dimensions
φ40.5
φ16.5
35.5 3.58.1
Dimensions
φ18
40 3.57
φ42
φ40.5, P=0.5
Unit: mm
FL-CC0815B-VG FL-CC1614A-VG
φ20
33 3.84.5
φ30
φ27, P=0.5
Unit: mm
Dimensions
Scale 60:100
Scale 60:100 Scale 60:100 Scale 60:100 Scale 60:100
Scale 60:100■ Standard lenses for machine vision use■ Compatible with VGA-class cameras■ Production line handling cameras from 1/2" to 1" formats■ Lock screws as standard vibration-control measures
An extensive line of general-use lenses boasting high-performance lens technologyFeaturing vibration-control measures, these lenses are a superior choice for installation in machine vision systems.Built for a wide variety of uses, including pattern matching, component positioning, missing-part inspection, board mounting,and inspection of pharmaceuticals, produce, and grains.
Format size 2/3" formatFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22Mount C
Horizontal angle of view
1/3" format 5.5°1/2" format 7.3°1/1.8" format 8.2°2/3" format 10.0°
Minimum object distance 0.9 mBack focal length 21.03 mmFilter size 27 P=0.5 mmDimensions φ29.5×34 mmWeight 55 gRemarks Focus & Iris lock screws
Format size 2/3" formatFocal length 50 mmMaximum aperture ratio 1 : 2.4Iris range 2.4 ~ 22Mount C
Horizontal angle of view
1/3" format 5.6°1/2" format 7.5°1/1.8" format 8.4°2/3" format 10.3°
Minimum object distance 0.3 mBack focal length 22.3 mmFilter size 30.5 P=0.5 mmDimensions φ32×46.5 mmWeight 66 gRemarks Focus & Iris lock screws
φ32
φ30.5, P=0.5
φ34
59.6 4
FL-CC7528-2M
Dimensions
Format size 2/3" formatFocal length 75 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~32Mount C
Horizontal angle of view
1/3" format 3.8°1/2" format 5.0°1/1.8" format 5.7°2/3" format 6.9°
Minimum object distance 0.7 mBack focal length 30.94 mmFilter size 30.5 P=0.5 mmDimensions φ34×59.6 mmWeight 125 gRemarks Focus & Iris lock screws
FL-CC7528-2M Product specifications
Scale 80:100
FL-CC5024A-2M
φ32
46.5 4
φ30.5 P=0.5
Dimensions
FL-CC5024A-2M Product specifications
Scale 80:100
FL-CC5028-2M
φ28.5
φ27, P=0.5
φ29.5
34 4
Dimensions
FL-CC5028-2M Product specifications
Scale 80:100
FL-CC3516-2M
Format size 2/3" formatFocal length 35 mmMaximum aperture ratio 1 : 1.6Iris range 1.6~16Mount C
Horizontal angle of view
1/3" format 8.1°1/2" format 10.8°1/1.8" format 12.1°2/3" format 14.8°
Minimum object distance 0.4 mBack focal length 11.85 mmFilter size 27 P=0.5 mmDimensions φ29.5×35.4 mmWeight 64 gRemarks Focus & Iris lock screws
FL-CC3516-2M Product specifications
Scale 80:100
φ32
6.938
φ19.5
4
φ30.5 P=0.5
Unit: mm
FL-CC2514A-2M
Dimensions
Scale 80:100
φ16.5
φ28.5
φ27, P=0.5
φ29.5
32 46.9
Unit: mm
FL-CC2514-2M
Dimensions
Format size 2/3" formatFocal length 25 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~16Mount C
Horizontal angle of view
1/3" format 11.0°1/2" format 14.6°1/1.8" format 16.4°2/3" format 20.0°
Minimum object distance 0.25 mBack focal length 11.50 mmFilter size 27 P=0.5 mmDimensions φ29.5×32 mmWeight 55 gRemarks Focus & Iris lock screws
FL-CC2514-2M Product specifications
Scale 80:100
NEW
NEW
Format size 2/3" formatFocal length 25 mmMaximum aperture ratio 1 : 1.4Iris range 1.4 ~16Mount C
Horizontal angle of view
1/3" format 10.7°1/2" format 14.2°1/1.8" format 16.0°2/3" format 19.5°
Minimum object distance 0.1 mBack focal length 12.1 mmFilter size 30.5 P=0.5 mmDimensions φ32×38 mmWeight 63 gRemarks Focus & Iris lock screws
FL-CC2514A-2M Product specifications
Unit: mmUnit: mm Unit: mm
Unit: mm
Dimensions
φ19.5
φ28.5
φ27, P=0.5
φ29.5
35.4 46
2 Mega-Pixel Lens (Manual Iris Lens, compatible with 2 mega-pixel cameras) VGA Lens (Manual Iris Lens)
15 16
φ60
φ33.5
φ35φ55
φ52, P=0.75
10.7(Max.)
70.4(Min.)77.2(Max.)
φ36
φ72
φ62, P=0.75
56.8 10.3
φ36
φ72
φ62, P=0.75
56.8 20
φ60
φ33.5
φ35
φ55
φ52, P=0.75
17.4363.6(Min.)70.4(Max.) (Max.)
48 3.5
φ48
φ46, P=0.75
37.3 3.8
φ30
φ27, P=0.5
40 3.5
φ42
φ40.5, P=0.5
φ16
40 3.57.7
φ42
φ40.5, P=0.5
φ40.5, P=0.5
φ42
50 3.5
φ18.7
φ57
φ55, P=0.75
95 3.5
3.8
77 18
φ51
φ49, P=0.5
90 3.580.5 9.5
FL-YFL5028A-02 Product specificationsFormat size 45 mm Image circleFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22Mount F-mount (bayonet mount)
Field ofview
4,096×7 µm 191~125 mm7,450×4.7 µm 234~152 mm4,096×10 µm 273~178 mm
Working distance 361~242 mmBack focal length 30.43~34.54 mmFilter size 52 P=0.75 mmDimensions φ60×63.6 mmMin.~Max. Magnification 0.15~0.23×Weight 425 gRemarks Focus & Iris lock screws. Not for photographic cameras.
FL-YFL5028A-035 FL-YFL3528/FL-YKL3528 FL-YFL5028/FL-YKL5028
Unit: mmUnit: mm
Unit: mm
Unit: mm
Dimensions
Dimensions
DimensionsDimensions
FL-YFL5028A-02
Scale 40:100
Scale 40:100 Scale 40:100 Scale 40:100
Dimensions Dimensions
Unit: mm
Dimensions
Dimensions
Unit: mm Unit: mm Unit: mm Unit: mm
FL-BC5014A-VG
Format size 1" formatFocal length 50 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~CloseMount C
Horizontal angle of view
1/3" format 5.5°1/2" format 7.3°
1/1.8" format 8.2°2/3" format 10.0°1" format 14.4°
Minimum object distance 1.0 mBack focal length 18.05 mmFilter size 46 P=0.75 mmDimensions φ48×48 mmWeight 180 g
Remarks Focus & Iris lock screws
FL-BC5014A-VG Product specifications
FL-HC6Z0810-VG
FL-BC1214D-VG FL-BC1218A-VG FL-BC2514D-VG FL-BC2518-VG
FL-BC1214D-VG Product specificationsFormat size 1" formatFocal length 12.5 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~CloseMount C
Horizontal angle of view
1/3" format 21.5°1/2" format 28.5°
1/1.8" format 31.9°2/3" format 38.6°1" format 53.9°
Minimum object distance 0.3 mBack focal length 14.40 mmFilter size 40.5 P=0.5 mmDimensions φ42×50 mmWeight 135 g
Remarks Focus & Iris lock screws
FL-BC2514D-VG Product specificationsFormat size 1" formatFocal length 25 mmMaximum aperture ratio 1 : 1.4Iris range 1.4~22Mount C
Horizontal angle of view
1/3" format 11.0°1/2" format 14.6°
1/1.8" format 16.4°2/3" format 20.1°1" format 28.9°
Minimum object distance 0.3 mBack focal length 14.98 mmFilter size 27 P=0.5 mmDimensions φ30×37.3 mmWeight 76 g
Remarks Focus & Iris lock screws
FL-BC2518-VG Product specificationsFormat size 1" formatFocal length 25 mmMaximum aperture ratio 1 : 1.8Iris range 1.8~CloseMount C
Horizontal angle of view
1/3" format 10.9°1/2" format 14.5°
1/1.8" format 16.3°2/3" format 19.9°1" format 28.2°
Minimum object distance 0.6 mBack focal length 15.80 mmFilter size 40.5 P=0.5 mmDimensions φ42×40 mmWeight 87 g
Remarks Focus & Iris lock screws
Dimensions
Unit: mm
Dimensions
FL-HC6Z0810-VG Product specificationsFormat size 1/2" formatFocal length 8~48 mmMaximum aperture ratio 1 : 1.0~1.2Iris range 1.0~22Mount C
Horizontal angle of view
1/3" format 33.0~5.8° 1/2" format 43.3~7.7°
1/1.8" format —2/3" format —
Minimum object distance 0.75 mBack focal length 13.65 mmFilter size 55 P=0.75 mmDimensions φ57×95 mmWeight 430 gRemarks Manual Iris, Lock screws
FL-CC6Z1218-VG/FL-CC6Z1218A-VG Product specificationsFormat size 2/3" formatFocal length 12.5~75 mmMaximum aperture ratio 1 : 1.8Iris range 1.8 ~22Mount C
Horizontal angle of view
1/3" format 21.9~3.6°1/2" format 29.1~4.8°
1/1.8" format 31.9~5.5°2/3" format 39.7~6.6°
Minimum object distance 1.0 mBack focal length 18.41 mmFilter size 49 P=0.75 mmDimensions φ51×90 mmWeight 320 g
RemarksManual Iris: FL-CC6Z1218-VGManual Iris, Locking Screws
(zoom and focus only): FL-CC6Z1218A-VG
Dimensions
Unit: mm
FL-BC1218A-VG Product specificationsFormat size 1" formatFocal length 12.5 mmMaximum aperture ratio 1 : 1.8Iris range 1.8~CloseMount C
Horizontal angle of view
1/3" format 22.0°1/2" format 29.1°
1/1.8" format 32.6°2/3" format 39.5°1" format 55.4°
Minimum object distance 0.3 mBack focal length 10.36 mmFilter size 40.5 P=0.5 mmDimensions φ42×40 mmWeight 95 g
Remarks Focus & Iris lock screws
Scale 60:100
Scale 60:100
Scale 60:100Scale 60:100
Scale 60:100
FL-CC6Z1218-VG/FL-CC6Z1218A-VG
Scale 40:100 Scale 40:100
■ High resolution, high contrast■ Suitable for sensors up to 45 mm■ Abundant Light Distribution■ Minimal distortion■ Available in F-mount and PENTAX K mount■ Lockable focus & iris rings
Even, high definition optical characteristics across the entire image (including the periphery)With a design optimized for FA close-up shooting, this lens is suitable for sensors up to 45 mmUsed for inspection of steel, pulp, fibre/textile, printing, film and other flat materials and Web appearance testing equipment
Format size 45 mm Image circleFocal length 35 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22
Mount F-mount (bayonet mount) FL-YFL3528K-mount (PENTAX bayonet mount) FL-YKL3528
Field ofview
4,096×7 µm 57 mm(Magnification: 0.5×)7,450×4.7 µm 70 mm(Magnification: 0.5×)4,096×10 µm 81 mm(Magnification: 0.5×)
Minimum object distance 0.19 m(Magnification: 0.5×)Back focal length 33.22 mmFilter size 62 P=0.75 mm
Dimensions φ72×56.8 mm(FL-YFL3528) φ72×57.8 mm(FL-YKL3528)
Min.~Max. Magnification ∞~0.5×Weight 380 g
Remarks Focus: Lock Screw Iris: Click stop. Not for photographic cameras.
Format size 45 mm Image circleFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22Mount F-mount (bayonet mount)
Field ofview
4,096×7 µm 102~72 mm7,450×4.7 µm 125~88 mm4,096×10 µm 146~102 mm
Working distance 201~146 mmBack focal length 37.16~43.29 mmFilter size 52 P=0.75 mmDimensions φ60×70.4 mmMin.~Max. Magnification 0.28~0.4×Weight 435 g
Remarks Focus & Iris lock screws. Not for photographic cameras.
FL-YFL3528/FL-YKL3528 Product specifications FL-YFL5028/FL-YKL5028 Product specificationsFL-YFL5028A-035 Product specificationsFormat size 45 mm Image circleFocal length 50 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~22
Mount F-mount (bayonet mount) FL-YFL5028K-mount (PENTAX bayonet mount) FL-YKL5028
Field ofview
4,096×7 µm 57 mm(Magnification: 0.5×)7,450×4.7 µm 70 mm(Magnification: 0.5×)4,096×10 µm 81 mm(Magnification: 0.5×)
Minimum object distance 0.25 m(Magnification: 0.5×)Back focal length 36.99 mmFilter size 62 P=0.75 mm
Dimensions φ72×56.8 mm(FL-YFL5028) φ72×57.8 mm(FL-YKL5028)
Min.~Max. Magnification ∞~0.5×Weight 370 g
Remarks Focus: Lock Screw Iris: Click stop. Not for photographic cameras.
Line-Scan LensVGA Lens (Manual Iris Lens • Manual Zoom Lens)
17 18
0.5
φ31
RICOH FP-RGZ5(0.5 mm)
1
φ31
RICOH FP-RG01(1 mm)
φ31
9
4
4.1
5
RICOH FP-RG05(5 mm)
φ31
10
14
4
RICOH FP-RG10(10 mm)
φ31
24
20 4
RICOH FP-RG20(20 mm)
φ31
44
40 4
RICOH FP-RG40(40 mm)
UV Lens
Unit: mm
Unit: mm
Dimensions
Dimensions
FL-BC2528-VGUV
FL-BC7838-VGUV
Format size 1" formatFocal length 25 mmMaximum aperture ratio 1 : 2.8Iris range 2.8~16Mount C
Horizontal angle of view
1/3" format 11.1°1/2" format 14.8°1/1.8" format 16.6°2/3" format 20.4°1" format 29.7°
Minimum object distance 0.23 mBack focal length 22.07 mmFilter size 25.5 P=0.5 mmDimensions φ30×25.4 mmWeight 33 gRemarks Optimum wavelength 365 nm
FL-BC2528-VGUV Product specificationsFormat size 1" formatFocal length 78 mmMaximum aperture ratio 1 : 3.8Iris range 3.8~16Mount C
Horizontal angle of view
1/3" format 3.5°1/2" format 4.7°1/1.8" format 5.3°2/3" format 6.5°1" format 9.5°
Minimum object distance 0.44 mBack focal length 71.31 mmFilter size 49 P=0.75 mmDimensions φ62.5×109.3 mmWeight 446 gRemarks Optimum wavelength 365 nm
FL-BC7838-VGUV Product specifications
Scale 100:100 Scale 100:100
Unit: mm
FP-RGZ5 FP-RG01 FP-RG05
FP-RG10 FP-RG20 FP-RG40
Camera & Lens Option
FP-CN6PBFP-TPHCA
FP-CAG03
FP-CAG05
Lens Option
Connector cable compatible with Camera Link, GigE Vision, and RICOH Extended Depth of Field Cameras
GigE Vision EDFC*
GigE Vision EDFC*
*Compatible with RICOH Extended Depth of Field Cameras
φ28
φ25.5, P=0.5
φ30
25.4 4
φ55
φ49, P=0.75
φ62.5
109.3
71.9
φ46
4
37.4
Extension Tube Set (Macro Rings)
Cable
Tripod Bracket Power supply and input/output connector
■ High performance quartz glass, enabling the capture of sharpimages in the near-ultraviolet region.
■ Extended wavelength range (230 nm to 800 nm), with peakperformance at 365 nm.
■ Compact design, ideal for integration into machine vision systems
■ Optimised for use with band pass filters and UV illumination toprovide falsified documents detection
An optical system that employs optical-grade quartz glass for imaging in the near-ultraviolet region This lens is optimized for application in the inspection of minute surfacesUsed for detection of counterfeit banknotes; falsified documents and credit cards, surface inspection of circuit boards for soldering defects
UV Lens with near UV light. The texture of material and unevenness of ink can be recognized
Ordinary Lens with visible light
Camera Option Camera accessories (RICOH FP series) that support RICOH FV series highly accurate performance
Lens accessories (RICOH FP series) that maximize the high-performance of RICOH FL series and provide a variety of uses
Camera Link Cable: 3 mConnector specs (camera end: board end)SDR: MDR Standard thin PoCL
Camera Link Cable: 5 mConnector specs (camera end: board end)SDR: MDR Standard thin PoCL
FP-CAC03
FP-CAC05
Camera Link
Camera Link
GigE Vision Cable: 3 mConnector specs (camera end: board end)Horizontal straight: Latch type
GigE Vision Cable: 5 m
Connector specs (camera end: board end)
Horizontal straight: Latch type
A 6-pin connector for power supply and input/output signal use[Supported cameras] FV-L500B1, FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
Camera tripod bracket facilitates high-precision sensing[Supported cameras] FV-L200B1, FV-L030B1
【FP-RGST】 6 Extensing tube ring setsExtension tube set (Macro Rings) are inserted between the lens and camera to shift the focus point further than the mechanical limit of the lens, for close-up applications. Different length tubes can be used in combination with each other.
Note Extension Tubes are not suitable for zoom lenses. Lens will not track focus whilst zooming.
Model name Length (mm)
Maximum diameter (mm)
FP-RGZ5 0.5
31
FP-RG01 1
FP-RG05 5
FP-RG10 10
FP-RG20 20
FP-RG40 40
Dimensions
Length: 0.5 mmMaximum diameter: 31 mm
Length: 1 mmMaximum diameter: 31 mm
Length: 5 mmMaximum diameter: 31 mm
Length: 10 mmMaximum diameter: 31 mm
Length: 20 mmMaximum diameter: 31 mm
Length: 40 mmMaximum diameter: 31 mm
19 20
Manual iris lenses (FL-HC0514-2M, FL-CC0814-2M, FL-CC1214-2M) are supplied with 2 thumb screws. Other lenses are supplied with 6 fixing screws. Remove the 6 fixing screws and replace with the 2 supplied thumb screws as required.
Do not remove (-) screws in the iris ring.Doing so may cause the iris blades to jam.
FL-CC0814-5M, FL-CC1614-5M, FL-CC2514-5M, FL-HC0514-2M, FL-HC1214-2M, FL-CC0614A-2M, FL-CC0814A-2M, FL-CC0814-2M, FL-CC1214A-2M, FL-CC1214-2M, FL-CC1614A-2M, FL-CC1614-2M, FL-CC2514A-2M, FL-CC2514-2M, FL-CC3516-2M, FL-CC5024A-2M, FL-CC5028-2M, FL-CC7528-2M
FL-HC0416X-VG(Iris ring only), FL-HC0612A-VG, FL-CC0815B-VG, FL-CC0418DX-VG(Iris ring only), FL-BC1214D-VG, FL-BC1218A-VG, FL-BC2518-VG, FL-BC5014A-VG
FL-HC1212B-VG, FL-CC1614A-VG, FL-BC2514D-VG
φ17
11.6
φ30.5
6.4
4
Fixing screws for Focusing ring (3 Positions)
Fixing screws for Iris ring (3 Positions)
Iris ringFocusing ring
Fixing screws for Iris ring (3 Positions)
Fixing screws for Focusing ring (3 Positions)
Iris ring Focusing ring
Mount Frame Fixing Screw
Fixing screws for Iris ring (3 Positions)
Fixing screws for Focusing ring (3 Positions)
Iris ringFocusing ring
Note
Reverse Ring Mount Adapter
Macro Focus Mount
Extender
SpecificationsFP-EX2
Focal length magnification 2×Flange back length 17.526 mmWeight 51 gCompatible lens C-mount
Lock Levers and Lock Screws
Mount Rotation Adjustment
The mount position of the lens can be adjusted to see the focus and iris scale as follows.
1. Loosen the mount fixing screws (3〜4 pieces) on the mount2. Rotate the lens in the mount to see the scale indicator.3. Tighten the mount fixing screws (3〜4 positions) at torque (8〜12 N・cm) uniformly.
Screw locking agent is not normally used for mount fixing screws. Excluding FL-HC0614-2M
Model name Iris Focus Accessories Mount position5 Mega-Pixel Lens(Manual Iris Lens, compatible with 5 mega-pixel cameras)FL-CC0814-5M
M1.4×2.2 M1.4×2.5 Thumb screws (×2)Adjustable
FL-CC1614-5MFL-CC2514-5MFL-CC5028A-5M02
Thumb screws (×6) M2.5×6.0(×2)FL-CC5028A-5M0352 Mega-Pixel Lens(Manual Iris Lens, compatible with 2 mega-pixel cameras)FL-HC0514-2M Thumb screws (M2×2.7) — —FL-HC0614-2M
M1.4×2.2 M1.4×3.0Thumb screws (×2) Adjustable
FL-HC1214-2MFL-CC0614A-2M
M2.0×3.0 M2.0×5.0FL-CC0814A-2MFL-CC0814-2M Thumb screws (M2×2.7) — —FL-CC1214A-2M M1.4×2.2 M1.4×3.0 Thumb screws (×2) AdjustableFL-CC1214-2M Thumb screws (M2×2.7) — —FL-CC1614A-2M
M1.4×2.2 M1.4×3.0Thumb screws (×2) Adjustable
FL-CC1614-2MFL-CC2514A-2MFL-CC2514-2MFL-CC3516-2MFL-CC5024A-2MFL-CC5028-2MFL-CC7528-2M M2.0×2.8 M2.0×5.0VGA Lens(Manual Iris Lens 1/2" format)FL-HC0416X-VG
M1.4×3.5— Thumb screws (×1)
AdjustableFL-HC0612A-VG M1.4×1.4Thumb screws (×2)
FL-HC1212B-VG M1.4×2.8 M1.4×2.0VGA Lens(Manual Iris Lens 2/3" format)FL-CC0418DX-VG
M1.4×3.5— Thumb screws (×1)
AdjustableFL-CC0815B-VG M1.4×1.4Thumb screws (×2)
FL-CC1614A-VG M1.4×2.8 M1.4×2.0VGA Lens(Manual Iris Lens 1" format)FL-BC1214D-VG
M1.4×3.5 M1.4×1.4
Thumb screws (×2) AdjustableFL-BC1218A-VGFL-BC2514D-VG M1.4×2.8 M1.4×2.0FL-BC2518-VG M1.4×3.5 M1.4×1.4FL-BC5014A-VG M1.4×4.0 M1.4×1.6Line Scan LensFL-YFL5028A-02
Thumb screws (×2) M2.5×6.0(×6)—
FL-YFL5028A-035 —FL-YFL3528 / FL-YKL3528
Click stop Thumb screws — —
FL-YFL5028 / FL-YKL5028 — —
Macro focus mounts extend the flange back length by 2 mm by replacing the original C-Mount of lens.
Note Mount screw length is normally 3.5~4 mm.If the use of 2 mm of Extension Tube is required, the remaining mount screw is insufficient to mount to the camera securely. Under these circumstances use of this accessory is highly recommended.
【FP-MUVG】(for FL-BC2514D-VG, FL-CC1614A-VG, FL-HC1212B-VG)
【FP-MU2M】(for mega-pixel lens only)
2
φ30
FP-MUVG
(Original Lens length before use)
5
12.9
7.9
FL-BC2514D-VGFL-CC1614A-VGFL-HC1212B-VG 5
11.8
6.8
2
φ29
FP-MU2M
FL-CC1614-2MFL-CC2514-2MFL-CC3516-2MFL-CC5028-2MFL-HC1214-2M
(Original Lens length before use)
【FP-MA】Use this mount adapter to mount a C-mount lens on a CS-mount camera.
φ31
5
9
4
【FP-RR27】To achieve magnification greater than 1:1, use this accessory to reverse the lens. Set comprises of a reverse ring and a shade ring.
Shade Ring
5.6 2
Reverse ring
3.52.5
φ29.4
1-32UN-2B
φ30
1-32UN-2A
φ27, P=0.5
【FP-EX2】Attaches to the rear of C-Mount lenses to double the focal length.
Characteristics1) When the focal length is doubled, the angle of view halves and the F no. is doubled.2) Resolution is lowered, contrast reduced and image sharpness reduced due to decreased depth of field. (There is no change in zoom ratio or minimum object distance.)3) Range extender cannot be attached if the rear optic protrudes by 3.7 mm or more from the flange surface.
Note
Reference DataCamera & Lens Option
21 22
Format Size
Model name1/3" format angle of view (° )1/2" format angle of view (° )1/1.8" format angle of view (° )2/3" format angle of view (° ) 1" format angle of view (° )
Diagonal Horizontal Vertical Diagonal Horizontal Vertical Diagonal Horizontal Vertical Diagonal Horizontal Vertical Diagonal Horizontal Vertical
5 Mega-Pixel Lens(Manual Iris Lens, compatible with 5 mega-pixel cameras)
2/3" format
FL-CC0814-5M 40.7 32.9 24.8 53.1 43.2 32.9 58.9 48.2 36.8 69.4 57.8 44.5 — — —
FL-CC1614-5M 21.3 17.1 12.9 28.1 22.7 17.1 31.5 25.4 19.2 37.9 30.8 23.4 — — —
FL-CC2514-5M 13.7 11.0 8.2 18.1 14.6 11.0 20.4 16.4 12.3 24.7 19.9 15.0 — — —
FL-CC5028A-5M02 0.2X 5.6 4.4 3.3 7.4 5.9 4.4 8.3 6.7 5.0 10.1 8.1 6.1 — — —
FL-CC5028A-5M035 0.35X 4.9 3.9 3.0 6.5 5.2 3.9 7.3 5.9 4.4 8.9 7.2 5.4 — — —
2 Mega-Pixel Lens(Manual Iris Lens, compatible with 2 mega-pixel cameras)
1/2" format
FL-HC0514-2M 62.3 51.4 39.5 76.7 65.5 51.4 — — — — — — — — —
FL-HC0614-2M 58.6 44.5 33.9 69.0 57.4 44.3 — — — — — — — — —
FL-HC1214-2M 27.2 21.9 16.5 35.7 28.9 21.9 — — — — — — — — —
2/3" format
FL-CC0614A-2M 52.1 42.6 32.5 66.2 55.1 42.6 72.4 60.8 47.4 83.0 71.2 56.5 — — —
FL-CC0814A-2M 40.2 32.6 24.7 52.0 42.7 32.6 57.3 47.4 36.4 66.7 56.3 43.9 — — —
FL-CC0814-2M 40.1 32.4 24.6 51.9 42.5 32.4 57.4 47.3 36.3 67.1 56.3 43.7 — — —
FL-CC1214A-2M 27.5 22.1 16.7 36.1 29.2 22.1 40.2 32.7 24.8 47.9 39.4 30.1 — — —
FL-CC1214-2M 28.2 22.7 17.1 37.0 30.0 22.7 41.2 33.5 25.4 49.2 40.4 30.8 — — —
FL-CC1614A-2M 21.2 17.1 12.8 28.0 22.6 17.1 31.3 25.3 19.2 37.7 30.7 23.3 — — —
FL-CC1614-2M 21.3 17.1 12.9 28.2 22.7 17.1 31.6 25.5 19.2 38.3 31.0 23.4 — — —
FL-CC2514A-2M 13.4 10.7 8.0 17.7 14.2 10.7 19.9 16.0 12.0 24.2 19.5 14.7 — — —
FL-CC2514-2M 13.7 11.0 8.2 18.2 14.6 11.0 20.4 16.4 12.3 24.9 20.0 15.1 — — —
FL-CC3516-2M 10.1 8.1 6.1 13.4 10.8 8.1 15.1 12.1 9.1 18.4 14.8 11.1 — — —
FL-CC5024A-2M 7.0 5.6 4.2 9.4 7.5 5.6 10.5 8.4 6.3 12.8 10.3 7.7 — — —
FL-CC5028-2M 6.9 5.5 4.1 9.1 7.3 5.5 10.3 8.2 6.2 12.5 10.0 7.5 — — —
FL-CC7528-2M 4.7 3.8 2.8 6.3 5.0 3.8 7.1 5.7 4.2 8.6 6.9 5.2 — — —
VGA Lens(Manual Iris Lens)
1/2" format
FL-HC0416X-VG 80.7 64.0 47.7 109.7 86.4 64.0 — — — — — — — — —
FL-HC0612A-VG 53.5 43.4 32.9 68.7 56.8 43.4 — — — — — — — — —
FL-HC1212B-VG 28.3 22.6 16.9 37.8 30.2 22.6 — — — — — — — — —
2/3" format
FL-CC0418DX-VG 67.4 54.6 41.3 87.8 71.6 54.6 97.2 79.8 61.1 114.8 95.4 73.7 — — —
FL-CC0815B-VG 39.6 31.9 24.0 51.9 42.1 31.9 57.6 47.0 35.7 67.9 56.5 43.3 — — —
FL-CC1614A-VG 21.1 16.9 12.7 28.0 22.5 16.9 31.4 25.2 19.0 38.2 30.7 23.2 — — —
1" format
FL-BC1214D-VG 26.8 21.5 16.2 35.3 28.5 21.5 39.5 31.9 24.2 47.5 38.6 29.4 65.0 53.9 41.6
FL-BC1218A-VG 27.3 22.0 16.5 36.1 29.1 22.0 40.4 32.6 24.7 48.7 39.5 30.0 67.1 55.4 42.6
FL-BC2514D-VG 13.7 11.0 8.2 18.3 14.6 11.0 20.5 16.4 12.3 25.1 20.1 15.1 36.1 28.9 21.7
FL-BC2518-VG 13.7 10.9 8.2 18.1 14.5 10.9 20.3 16.3 12.3 24.6 19.9 15.0 34.7 28.2 21.4
FL-BC5014A-VG 6.9 5.5 4.1 9.1 7.3 5.5 10.3 8.2 6.2 12.5 10.0 7.5 17.9 14.4 10.9
VGA Lens(Manual Zoom Lens)
1/2" format FL-HC6Z0810-VG 40.7-7.2 33.0-5.8 24.9-4.4 52.7-9.5 43.3-7.7 33.0-5.8 — — — — — — — — —
2/3" format
FL-CC6Z1218-VG/FL-CC6Z1218A-VG 27.3-4.5 21.9-3.6 16.4-2.7 36.2-6.0 29.1-4.8 21.9-3.6 39.6-6.8 31.9-5.5 24.0-4.1 49.1-8.2 39.7-6.6 30.0-5.0 — — —
UV Lens
1/2" format
FL-BC2528-VGUV 13.9 11.1 8.3 18.9 14.8 11.1 20.8 16.6 12.5 25.5 20.4 15.3 37.2 29.7 22.2
FL-BC7838-VGUV 4.4 3.5 2.7 5.9 4.7 3.5 6.6 5.3 4.0 8.1 6.5 4.9 11.8 9.5 7.1
Model nameFocallength
(f)
1st principalpositon
(H1)
2nd principalpositon
(H2)
DistancebetweenH1 and
H2(⊿H)
Opticalpath
length(I)
Totallength
(d)
Entrancepupil
position
Diameterof
entrancepupil
Exitpupil
position
Diameterof Exitpupil
positionDistortion* Vignetting*
Backfocuslength(in air)
Mechanicalfocus
(Adjustablefocusing
rangeby rotatingfocus ring)
Remarks
5 Mega-Pixel Lens(Manual Iris Lens, compatible with 5 mega-pixel cameras)FL-CC0814-5M 8.2 -50.2 -8.2 41.9 77.9 80.8 -57.4 5.7 -64.2 47.6 -4.9 73.2 11.5 0.6 W.D. =250 mm, y=5.5FL-CC1614-5M 16.0 -29.6 -16.0 13.6 58.9 64.0 -40.9 11.2 -54.3 40.5 -0.5 60.6 11.5 2.3 W.D. =250 mm, y=5.5FL-CC2514-5M 25.0 -15.2 -25.0 -9.8 41.6 54.7 -18.7 17.5 -29.1 21.8 -0.6 71.4 12.4 5.5 W.D. =250 mm, y=5.5FL-CC5028A-5M02 51.4 -69.7 -51.4 18.4 109.7 113.0 -66.9 17.9 -48.7 17.1 0.0 96.6 33.0 — M=-0.2FL-CC5028A-5M035 51.1 -70.0 -51.0 19.0 116.9 120.7 -67.6 17.8 -48.7 17.1 0.0 96.6 40.7 — M=-0.352 Mega-Pixel Lens(Manual Iris Lens, compatible with 2 mega-pixel cameras)FL-HC0514-2M 5.1 — — — 61.3 63.0 15.0 3.6 — 103.0 -0.5 57.9 10.8 0.1 W.D. =900 mm, y=4.0FL-HC0614-2M 6.0 -35.2 -6.0 29.2 42.0 42.6 -39.5 — -21.8 — -4.3 54.6 12.4 — W.D. =280 mm, y=4.0FL-HC1214-2M 12.4 -17.8 -12.4 5.4 41.0 46.0 -25.8 8.5 -34.5 25.4 -0.7 69.4 11.5 1.5 W.D. =250 mm, y=4.0FL-CC0614A-2M 6.2 -51.7 -6.2 45.5 73.9 77.0 -57.6 4.3 -123.5 92.4 -1.3 32.5 10.9 0.1 W.D. =250 mm, y=5.5FL-CC0814A-2M 8.2 -30.3 -8.2 22.0 51.5 53.7 -38.1 5.7 -171.7 127.6 -1.0 49.1 11.1 0.3 W.D. =250 mm, y=5.5FL-CC0814-2M 8.3 — — — 43.9 45.7 12.4 5.8 -44.7 40.4 -0.1 24.7 13.1 0.2 y=5.5FL-CC1214A-2M 12.3 -32.4 -12.3 20.1 58.8 62.7 -42.9 8.4 -87.3 63.5 -0.5 40.1 10.7 0.6 W.D. =250 mm, y=5.5FL-CC1214-2M 12.0 — — — 41.8 45.7 17.7 8.4 -59.5 50.8 0.1 31.7 13.1 0.4 y=5.5FL-CC1614A-2M 16.0 -16.2 -16.0 0.2 43.4 49.2 -29.4 11.2 -90.3 67.3 -0.5 45.3 10.7 1.0 W.D. =250 mm, y=5.5FL-CC1614-2M 16.0 -18.0 -16.0 2.0 46.6 50.7 -30.2 11.2 -68.0 50.7 -2.0 44.3 14.6 1.5 W.D. =250 mm, y=5.5FL-CC2514A-2M 25.6 -12.9 -25.6 -12.7 39.9 55.0 -17.0 17.9 -30.4 22.7 -1.1 48.8 12.1 2.6 W.D. =250 mm, y=5.5FL-CC2514-2M 25.0 -14.5 -25.0 -10.5 39.5 49.5 -19.6 17.5 -31.4 23.5 -1.2 48.5 11.5 3.5 W.D. =250 mm, y=5.5FL-CC3516-2M 34.0 -10.9 -34.0 -23.0 47.1 52.9 -11.3 20.6 -34.3 21.9 -0.9 62.6 11.9 3.5 W.D. =250 mm, y=5.5FL-CC5024A-2M 48.8 -39.5 -48.8 -9.3 51.8 63.5 -4.2 19.9 -28.3 11.9 0.5 73.8 22.3 11.9 W.D. =300 mm, y=5.5FL-CC5028-2M 50.0 -47.4 -50.0 -2.6 46.5 51.5 -3.2 17.8 -26.5 9.7 -0.1 79.8 21.0 3.5 W.D. =250 mm, y=5.5FL-CC7528-2M 72.8 -57.6 -72.8 -15.2 73.1 77.4 15.9 25.2 -36.2 12.8 0.0 95.8 30.4 10.5 W.D. =250 mm, y=5.5VGA Lens(Manual Iris Lens 1/2" format)FL-HC0416X-VG 4.4 -42.1 -4.4 37.8 59.5 61.2 -46.0 2.7 -43.5 27.7 -35.4 40.5 10.4 —FL-HC0612A-VG 6.2 -39.1 -6.2 32.8 58.3 63.7 -44.9 5.0 -109.9 96.1 -5.8 43.4 14.3 0.3 FL-HC1212B-VG 12.2 -26.7 -12.2 14.5 47.6 53.0 -37.3 10.0 -88.6 27.1 -4.2 46.7 13.9 1.1 VGA Lens(Manual Iris Lens 2/3" format)FL-CC0418DX-VG 4.9 -37.0 -4.9 32.1 51.6 53.4 -41.5 2.8 -54.9 31.8 -28.8 25.1 9.7 —FL-CC0815B-VG 8.5 -31.2 -8.5 22.6 53.6 57.5 -39.1 5.7 -115.2 80.8 -4.2 30.3 10.9 0.6 FL-CC1614A-VG 16.2 -20.1 -16.2 3.9 41.0 50.5 -30.5 11.6 -45.7 34.9 -1.9 43.8 13.2 1.1 VGA Lens(Manual Iris Lens 1" format)FL-BC1214D-VG 12.7 -34.3 -12.7 21.7 63.5 67.5 -42.9 8.6 -39.5 28.5 -1.7 20.1 14.4 0.7 FL-BC1218A-VG 12.4 -24.6 -12.4 12.2 39.5 57.8 -22.1 6.8 -10.4 5.9 -3.6 30.3 10.4 0.6 FL-BC2514D-VG 25.1 -25.6 -25.1 0.5 51.4 54.8 -30.3 17.5 -30.8 22.7 -2.7 36.7 15.0 2.6 FL-BC2518-VG 25.0 -22.1 -25.0 -2.9 31.1 57.5 -29.5 13.9 -35.5 20.5 1.6 32.1 14.9 1.2 FL-BC5014A-VG 49.9 -47.3 -49.9 -2.6 57.4 65.5 1.7 35.7 -25.2 19.3 0.9 59.4 18.1 2.8 Line Scan LensFL-YFL5028A-02 54.1 -63.5 -65.0 -1.5 85.8 89.1 -63.3 19.2 -64.8 19.4 0.2 41.9 37.0 2.9 M=0.2, diagonal y=22.5FL-YFL5028A-035 54.9 -70.9 -74.2 -3.2 95.5 99.2 -69.9 19.4 -73.2 19.2 0.1 44.9 37.0 3.9 M=0.35, diagonal y=22.5FL-YFL3528 / FL-YKL3528 36.3 -61.8 -36.3 25.5 89.9 103.3 -72.3 13.0 -51.0 18.5 -0.5 34.3 33.2 19.7 M=0.2, diagonal y=22.5*1
FL-YFL5028 / FL-YKL5028 52.0 -54.8 -52.0 2.8 71.1 103.3 -57.1 18.6 -54.5 19.7 0.2 41.9 37.0 20.1 M=0.2, diagonal y=22.5*1
UV LensFL-BC2528-VGUV 25.0 -24.9 -25.0 -0.1 34.9 42.9 -25.9 — -26.1 — -4.1 87.7 12.8 4.1 266 nm, y=8.0FL-BC7838-VGUV 77.5 -77.6 -77.5 0.1 96.8 126.8 -78.8 — -78.8 — -0.2 98.4 71.3 23.1 250 nm, y=8.0
*1 These models adopt a floating mechanism and are not covered by the calculation above. Please contact us for details. Units : mm,* : %
Optical Data
2/3" format 1" format
6.6
9.525
1/3" format 1/2" format 1/1.8" format
4.8 5.4
8.8
7.2
12.70
4.86.4
3.668 9.0
10.991
15.875
A Object size (Vertical or Horizontal)B Imager format size (Vertical or Horizontal)M Magnification (B/A)f Focal length2 Distance between 1st and 2nd principal point
H2 1st principal position⊿H 2st principal positiond Distance between the front end of lens barrel and the focal pointI Distance between the 1st lens element and the focal point
f・M Length of the extension tube
O Object distance (Distance between the front end of lens barrel and the object)
*Note: The (+) sign denotes the Object → Imager direction.
First, calculate the magnification, M, by the following formula.
M = −B/A M = −4.8/20=−0.24×(The horizontal screen dimension is automatically decided when the vertical dimension is decided. Therefore, the vertical screen dimension is used here). Obtain a rough idea of the focal length required for your application with the object distance and magnification between the object size and image size by using the following formula:
f = −M・O f = −((−0.24)×100)=24 mm
According to the calculation a 24 mm lens is required. Then, select one of the closest RICOH lenses to 24 mm: FL-BC2514D-VG, FL-BC2518-VG, FL-CC2514-2M. Since the camera is 1.5 mega pixel, substitute the true focal length of FL-CC2514-2M into the following formula to calculate the overall distance L, by adding up the figures indicated in the attached table.
L = −f/M+f+f+⊿H−f・M L = −(25.00/(−0.24))+25.00+25.00+(−10.51)−(25.00×(−0.24)) L = 104.17+25.00+25.00−10.51+6.00=149.66
Finally, you can get an exact objective distance, O by the following formula (f・M is the length of the extension tube.)
O = L−d+f・M O = 149.66−49.53+(25.00×(−0.24))=94.13
Therefore, when viewing an object measuring 20 mm per side on a 1/2” format camera, use the FL-CC2514-2M and extension tube of 6 mm in length with a WD of 94.13 (about 94 mm). Use a lens with a longer f (focal length) if you want a longer WD, or a lens with a shorter focal length if you want a shorter WD.
Optical Calculations for Close-Up Applications
When viewing an object measuring 20 mm per side from a working distance (WD) of 100 mm with a 1/2” format camera (6.4 × 4.8 mm, 1.5 mega pixels)
f/M
Object
A B
f f
d
O⊿H
H2H1
IL
---f・M
Sensor
lens
Reference Data Reference Data
23 24
Camera LinkModel name Imager Effective pixel image output
(H×V)Cell size(H×V)
Frame rate(fps)
External dimensions(W×H×D)mm Lens mount Weight
(g) Page
FV-L500B1 2/3" interline 5.0 Mega pixels monochrome progressive CCD 2448×2058 3.45×3.45 16 35×35×40.7 C Approx 80 P06FV-L200B1 1/1.8" interline UXGA monochrome progressive CCD 1620×1236 4.4×4.4 15 28×28×40 C Approx 43 P07FV-L030B1 1/3" interline UXGA monochrome progressive CCD 648×494 7.4×7.4 90 28×28×40 C Approx 43 P08
FA Camera
GigE VisionModel name Imager Effective pixel image output
(H×V)Cell size(H×V)
Frame rate(fps)
External dimensions(W×H×D)mm Lens mount Weight
(g) Page
FV-G200B1 1/1.8" interline UXGA monochrome progressive CCD 1624×1236 4.4×4.4 15 35×35×50.8 C Approx 120 P09FV-G030B1 1/3" interline UXGA monochrome progressive CCD 648×494 7.4×7.4 90 35×35×50.8 C Approx 120 P10
UV Lens
Model name Focal length (mm) Iris range Mount
Horizontal angle of view (° ) Filter size(mm)
Dimensions(D×L)mm
Weight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝1" formatFL-BC2528-VGUV 25.0 2.8-16 C 11.1 14.8 16.6 20.4 29.7 25.5 P=0.5 φ30×25.4 33 Optimum wavelength 365 nm P19FL-BC7838-VGUV 78.0 3.8-16 C 3.5 4.7 5.3 6.5 9.5 49 P=0.75 φ62.5×109.3 446 Optimum wavelength 365 nm P19
Line Scan LensModel name Focal length
(mm) Iris range Mount Optical magnification
Field of view (mm) Filter size(mm)
Dimensions(D×L)mm
Weight(g) Remarks Page
4,096×7 µm 7,450×4.7 µm 4,096×10 µmFL-YFL5028A-02 50.0 2.8-22 F 0.15-0.23 191-125 234-152 273-178 52 P=0.75 φ60×63.6 425 Focus & Iris lock screws. Not for photographic cameras. P18FL-YFL5028A-035 50.0 2.8-22 F 0.28-0.4 102-72 125-88 146-102 52 P=0.75 φ60×70.4 435 Focus & Iris lock screws. Not for photographic cameras. P18FL-YFL3528 / FL-YKL3528 35.0 2.8-22 F
K ∞-0.5 (57 Opticalmagnification: 0.5×)
(70 Opticalmagnification: 0.5×)
(81 Opticalmagnification: 0.5×) 62 P=0.75 φ72×56.8
φ72×57.8 380 Focus: Lock Screw Iris: Click stop. Not for photographic cameras P18
FL-YFL5028 / FL-YKL5028 50.0 2.8-22 F
K ∞-0.5 (57 Opticalmagnification: 0.5×)
(70 Opticalmagnification: 0.5×)
(81 Opticalmagnification: 0.5×) 62 P=0.75 φ72×56.8
φ72×57.8 370 Focus: Lock Screw Iris: Click stop. Not for photographic cameras P18
VGA Lens(Manual Iris Lens)
Model name Focal length (mm) Iris range Mount
Horizontal angle of view (° ) Filter size(mm)
Dimensions(D×L)mm
Weight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝1/2" formatFL-HC0416X-VG 4.2 1.6-C C 64.0 86.4 — — — — φ42×43.5 120 Iris lock screws, Fixed focus P16FL-HC0612A-VG 6.0 1.2-C C 43.4 56.8 — — — 40.5 P=0.5 φ42×46 125 Focus & Iris lock screws P16FL-HC1212B-VG 12.0 1.2-22 C 22.6 30.2 — — — 27 P=0.5 φ30×35.5 67 Focus & Iris lock screws P16⃝2/3" formatFL-CC0418DX-VG 4.8 1.8-C C 54.6 71.6 79.8 95.4 — — φ40.5×35.5 105 Iris lock screws, Fixed focus P16FL-CC0815B-VG 8.5 1.5-C C 31.9 42.1 47.0 56.5 — 40.5 P=0.5 φ42×40 120 Focus & Iris lock screws P16FL-CC1614A-VG 16.0 1.4-22 C 16.9 22.5 25.2 30.7 — 27 P=0.5 φ30×33 58 Focus & Iris lock screws P16⃝1" formatFL-BC1214D-VG 12.5 1.4-C C 21.5 28.5 31.9 38.6 53.9 40.5 P=0.5 φ42×50 135 Focus & Iris lock screws P17FL-BC1218A-VG 12.5 1.8-C C 22.0 29.1 32.6 39.5 55.4 40.5 P=0.5 φ42×40 95 Focus & Iris lock screws P17FL-BC2514D-VG 25.0 1.4-22 C 11.0 14.6 16.4 20.1 28.9 27 P=0.5 φ30×37.3 76 Focus & Iris lock screws P17FL-BC2518-VG 25.0 1.8-C C 10.9 14.5 16.3 19.9 28.2 40.5 P=0.5 φ42×40 87 Focus & Iris lock screws P17FL-BC5014A-VG 50.0 1.4-C C 5.5 7.3 8.2 10.0 14.4 46 P=0.75 φ48×48 180 Focus & Iris lock screws P17
VGA Lens(Manual Zoom Lens)Model name Focal length
(mm) Iris range MountHorizontal angle of view (° ) Filter size
(mm)Dimensions
(D×L)mmWeight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝1/2" formatFL-HC6Z0810-VG 8.0-48 1.0-22 C 33.0-5.8 43.3-7.7 — — — 55 P=0.75 φ57×95 430 Manual Iris, Lock screws P17⃝2/3" formatFL-CC6Z1218-VG 12.5-75 1.8-22 C 21.9-3.6 29.1-4.8 31.9-5.5 39.7-6.6 — 49 P=0.75 φ51×90 320 Manual Iris P17
FL-CC6Z1218A-VG 12.5-75 1.8-22 C 21.9-3.6 29.1-4.8 31.9-5.5 39.7-6.6 — 49 P=0.75 φ51×90 320 Manual Iris, Locking Screws(zoom and focus only) P17
Model name Focal length (mm) Iris range Mount Optical
magnificationHorizontal angle of view (° ) Filter size
(mm)Dimensions
(D×L)mmWeight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝2/3" formatFL-CC5028A-5M02 50.0 2.8-22 C 0.15-0.23 32-21 43-28 48-31 59-38 — 52 P=0.75 φ63.2×92.6 560 Focus & Iris lock screws P12FL-CC5028A-5M035 50.0 2.8-22 C 0.28-0.4 17-12 23-16 26-18 31-22 — 52 P=0.75 φ63.2×99.3 580 Focus & Iris lock screws P12
5 Mega-Pixel Lens(Manual Iris Lens, compatible with 5 mega-pixel cameras)Model name Focal length
(mm) Iris range MountHorizontal angle of view (° ) Filter size
(mm)Dimensions
(D×L)mmWeight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝2/3" formatFL-CC0814-5M 8.0 1.4-16 C 32.9 43.2 48.2 57.8 — 58 P=0.75 φ60.8×64 260 Focus & Iris lock screws P11FL-CC1614-5M 16.0 1.4-16 C 17.1 22.7 25.4 30.8 — 40.5 P=0.5 φ43×47 140 Focus & Iris lock screws P12FL-CC2514-5M 25.0 1.4-16 C 11.0 14.6 16.4 19.9 — 40.5 P=0.5 φ43×44 130 Focus & Iris lock screws P12
FA Lens
2 Mega-Pixel Lens(Manual Iris Lens, compatible with 2 mega-pixel cameras)
Model name Focal length (mm) Iris range Mount
Horizontal angle of view (° ) Filter size(mm)
Dimensions(D×L)mm
Weight(g) Remarks Page
1/3" format 1/2" format 1/1.8" format 2/3" format 1" format⃝1/2" formatFL-HC0514-2M 5.0 1.4-16 C 51.4 65.5 — — — 43 P=0.75 φ44.5×45.5 102 Focus & Iris lock screws P13FL-HC0614-2M 6.0 1.4-16 C 44.5 57.4 — — — — φ32×37.5 58 Focus & Iris lock screws P13FL-HC1214-2M 12.0 1.4-16 C 21.9 28.9 — — — 27 P=0.5 φ29.5×28.5 55 Focus & Iris lock screws P13⃝2/3" formatFL-CC0614A-2M 6.0 1.4-16 C 42.6 55.1 60.8 71.2 — — φ48×59.9 149 Focus & Iris lock screws P13FL-CC0814A-2M 8.0 1.4-16 C 32.6 42.7 47.4 56.3 — 40.5 P=0.5 φ42×36.7 76 Focus & Iris lock screws P14FL-CC0814-2M 8.0 1.4-16 C 32.4 42.5 47.3 56.3 — 30.5 P=0.5 φ33.5×28.2 63 Focus & Iris lock screws P14FL-CC1214A-2M 12.0 1.4-16 C 22.1 29.2 32.7 39.4 — — φ29.5×45.7 68 Focus & Iris lock screws P14FL-CC1214-2M 12.0 1.4-16 C 22.7 30.0 33.5 40.4 — 43 P=0.75 φ 33.5×28.2 62 Focus & Iris lock screws P14FL-CC1614A-2M 16.0 1.4-16 C 17.1 22.6 25.3 30.7 — 27 P=0.5 φ 29.5×32.2 54 Focus & Iris lock screws P14FL-CC1614-2M 16.0 1.4-16 C 17.1 22.7 25.5 31.0 — 27 P=0.5 φ29.5×33.2 63 Focus & Iris lock screws P14FL-CC2514A-2M 25.0 1.4-16 C 10.7 14.2 16.0 19.5 — 30.5 P=0.5 φ32×38 63 Focus & Iris lock screws P15FL-CC2514-2M 25.0 1.4-16 C 11.0 14.6 16.4 20.0 — 27 P=0.5 φ 29.5×32 55 Focus & Iris lock screws P15FL-CC3516-2M 35.0 1.6-16 C 8.1 10.8 12.1 14.8 — 27 P=0.5 φ29.5×35.4 64 Focus & Iris lock screws P15FL-CC5024A-2M 50.0 2.4-22 C 5.6 7.5 8.4 10.3 — 30.5 P=0.5 φ 32×46.5 66 Focus & Iris lock screws P15FL-CC5028-2M 50.0 2.8-22 C 5.5 7.3 8.2 10.0 — 27 P=0.5 φ29.5×34 55 Focus & Iris lock screws P15FL-CC7528-2M 75.0 2.8-32 C 3.8 5.0 5.7 6.9 — 30.5 P=0.5 φ 34×59.6 125 Focus & Iris lock screws P15
(For specifications of the RICOH Extended Depth of Field Cameras, see p. 3 to p.4.)
Focal Length
Angle of View
F Number
Close-up Application
Depth of Field
F = F No.H = hyper focal distance (distance at which the far limit of the depth of field is infinity)f = focal lengthL = object distance (distance from the subject to the primary principle point)T1 = near limitT2 = far limitC = circle of least confusion 1” format = 0.030 mm, 2/3” format = 0.020 mm, 1/1.8” format = 0.017 mm, 1/2” format = 0.015 mm, 1/3” format = 0.011 mm Note The values given are reference values given a resolution that is about the same as VGA.
M0 = pupil magnificationM = magnificationFe = effective F numberDepth of field increases when: *Focal length is shorter *F-number is larger *Object distance is longer
Rays from infinitely distant objects are condensed internally in the lens at a common point on the optical axis. The point at which the image sensor of the FA camera is positioned is called the focal point. By virtue of design, lenses have 2 principal points, 1st principle point and a 2nd principle point. The distance between the 2nd principle point and the focal point (image sensor) determines to focal length of the lens.
2nd principal point
1st principal pointFocal length
Focal point/Image sensorf
The angle formed by the two lines from the 2nd principle point and the edges of the sensor is called the angle of view. Therefore, the focal length of the lens is fixed regardless of the image format size of the FA camera. Conversely, the angle of view varies in accordance with the image size. The focal lengths in the catalogue are nominal and the angles of view calculated by the formula referring to the focal lengths are approximate.
2nd principal point
Image sensor
Focal length
f
θ B
θ=2×tan-1B2f
The F number is the index for the amount of light that passes through a lens. The smaller the number, the greater the amount of light. The F number is a ratio between the focal length and the effective aperture as follows.
fD==Focal length effective diameter (Diameter of entrance pupil)
F number = Df
There are two methods for imaging closer than the minimum object distance of a lens.
Infinite rays Image sensor
Focal length ofclose-up lens
Finite rays
Image fromfinite rays
The lens will beextended this much
χ
Figure 1
Figure 2
1) Extension Tube (Macro Ring) See Figure 1
When the rays originate from a finite object distance, the rays are condensed at a point further than the focal point, while the rays from infinite distance are condensed at the actual focal point. The focus adjustment moves the lens barrel toward the object to shift the focusing point at the image sensor. However, the amount of focusing adjustment is mechanically limited as set by the minimum object distance. Extension Tube (Macro Ring) is inserted in between the lens and the camera to shiftNote Do not use a extension tube with a zoom lens.
2) Close-Up Lens See Figure 2
The close-up lens has a positive meniscus lens as a supplementary lens. Generally, 3 types of close-up lenses are available, close-up lens No. 1, 2 and 3 have focal lengths of 1,000 mm (1000 mm/1), 500 mm (1,000 mm/2), and 333 mm (1,000 mm/3), respectively. When an object is placed at the focal point of the close-up lens, the rays from the object are converted by the close-up lens to be parallel rays against the optical axis as seen on the right.
When an object is focused, it is typically observed that the area in front and behind the object is also in focus. The range in focus is called depth of field. When the background is extended to infinity, the object distance (focusing distance) is called the hyper focal distance. Depth of field is calculated by the following formula.
T1= H + L - 2fL(H-f)
T2= H - LL(H-f)
H= C × Fef2
+ f
M0 Entrance Pupil DiameterExit Pupil Diameter
Fe= M0
M(1- )× F
=
Products Line UpReference Data
25 26
top related