retrofit your seawater systems with bondstrand · piping systems. e i i a e c i : retrofit your...
Post on 26-Mar-2020
4 Views
Preview:
TRANSCRIPT
Eliminate corrosion: Retrofit your seawater systems with Bondstrand®
BONDSTRAND®
GLASSFIBER REINFORCED EPOXY PIPE SYSTEMS
FOR RETROFIT APPLICATIONS
Corrosion of metallic piping is a well known
problem on board seagoing vessels and
offshore units. Corrosion typically occurs
when metal piping is part of the seawater
system, as well as in systems carrying fluids
used for cleaning, degreasing and water
treatment.
Traditionally, corroded piping is replaced
from time to time by new pipes made of the
same material. This means the defect is
repaired, but the problem is not solved.
Future replacement of the same pipe is only
a matter of time.
Leaking seawater lines are a nuisance
aboard ships, especially in the engine
room. Seawater spraying, or dripping from
leaking pipes may also result in collateral
damage to surrounding equipment and
instruments.
For many shipowners and offshore
operators, the exchange of piping is
regarded as part of the daily routine.
The time it takes to have corrosion
problems can be predicted, based
on experience and is often accepted as a
fact of life. No questions are asked and
systems are being repaired and replaced
frequently.
The question to ask is: "Do you have to
accept repeated pipe replacement due to
corrosion problems in your seawater piping
systems?" The answer is: "No. Corrosion
problems can be eliminated with
Bondstrand."
SolutionS
NOV Fiber Glass Systems offers the solution
to your corrosion problems aboard ships
and offshore units. It is called Bondstrand.
Bondstrand GRE pipe systems have a
number of significant advantages when
compared to steel or other metallic piping.
Bondstrand GRE pipe systems are extremely
resistant to corrosion from salt water and to
a wide range of chemicals. Also, there is
very little scaling or fouling that will occur,
avoiding pressure loss. Bondstrand GRE
pipe systems are easy to install, lightweight
and require no "hot work". Bondstrand GRE
pipe can be designed to operate at
temperatures up to 121 °C.
Since 1957, Bondstrand GRE piping
systems have been installed successfully
and proven their performance on thousands
of ships and offshore units all over the world.
IMO recognizes the
increasing interest to use
materials other than steel
for pipes on ships. In 1993, IMO developed
guidelines (Res. A.753 [18]) to provide
acceptance criteria for plastic materials in
piping systems.
Eliminate corrosion:
Retrofit your seawater systemswith Bondstrand
Corrosion
does not have
to be a
problem.
Ships operate in one of the most corrosive environments: sea water.
If steel or other types of metal piping were initially used in construction,
replace them with Bondstrand Glassfiber Reinforced Epoxy (GRE) when
corrosion causes them to fail.
2
ClASS APPRoVED
Major certifying bodies such as
Lloyd’s Register, Bureau Veritas,
Det Norske Veritas, American Bureau of
Shipping, GL, RINA, RMRS, etc. have
adopted and implemented the IMO
Guidelines in their respective Rules and
Regulations for the Classification of Ships.
Bondstrand pipe series that are used
in the marine/offshore industry are
Type Approved by all major certifying
bodies.
Bondstrand GRE piping systems include
easy to install standard filament wound
fittings. When standard fittings can not be
used, laminated fittings and spools can be
tailor-made to fit almost any system.
Replacement can take place at sea during
the voyage, at anchorage, during regular
loading and discharge operations or during
dry dock periods.
REDuCE CoStS
• on installation
• on material
• on downtime
• no painting required
• on improved flow characteristics
• on life-cycle maintenance
• one time investment
WiDE RAnGE oF
APPliCAtionS
Air and equipment cooling water
Ballast/segregated ballast
Brine
Chlorinated systems
Crude oil washing
Deck hot air drying (cargo tanks)
Drainage/sanitary service/sewage
Eductor systems
Electrical conduit
Exhaust piping
Fire mains and sprinkler systems
Fresh and salt water systems
Inert gas effluent
Main engine cooling
Petroleum cargo lines (cargo tanks)
Discharge lines
Scrubbers
Steam condensate
Tankcleaning (salt water system)
NOV Fiber Glass Systems has a
world-wide network of dedicated installers
who can carry out prefabrication, repairs
and retrofit jobs.
3
SALES OFFICESUnited StatesSan Antonio, Texas Oilfield ProductsPhone: 210 434 5043
Little Rock, ArkansasC&I/Fuel Handling ProductsPhone: 501 568 4010
Burkburnett, TexasMarine Offshore, Bondstrand ProductsPhone: 940 569 1471
Mineral Wells, TexasCentron ProductsPhone: 940 325 1341
CanadaUse U.S.A. Contacts
Mexico, Caribbean,Central AmericaUse U.S.A. Contacts South AmericaRecife, Pernambuco, BrazilPhone: 55 81 81312488
Betim, Minas Gerais, BrazilPhone: 55 31 3326 6900
Central Asia / RussiaAktau, KazakhstanPhone: 7 701 5141087
Moscow, Russian FederationPhone: 7 495 287 2685
Middle EastDubai, United Arab EmiratesPhone: 9714 886 5660
Asia, Pacific RimSingaporePhone: 656861 6118
Harbin ChinaPhone: 86 451 8709 1718
Suzhou, ChinaPhone: 86 512 8518 0099
Europe, Africa, CaspianGeldermalsen, The NetherlandsPhone: 31 345 587 587
MANUFACTURINGFACILITIESBurkburnett, Texas USAMineral Wells, Texas USAWichita, Kansas USALittle Rock, Arkansas USASan Antonio, Texas, USASand Springs, Oklahoma USABetim, BrazilGeldermalsen, The NetherlandsHarbin, ChinaMalaysiaRecife, BrazilSingaporeSohar, OmanSuzhou, China
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, dam-age or injury resulting from the use of information and data herein. All applications for the material described are at the user’s risk and are the user’s responsibility.All brands listed are trademarks of National Oilwell Varco.
One Company . . . Unlimited Solutions
fgspipe@nov.com w w w . f g s p i p e . c o m
Downhole Solutions
Drilling Solutions
Engineering and Project Management Solutions
Lifting and Handling Solutions
Production Solutions
Supply Chain Solutions
Tubular and Corrosion Control Solutions
Well Service and Completion Solutions
Headquarters
2425 SW 36th StreetSan Antonio, Texas 78237 USAPhone: 210 434 5043Fax: 210 434 7543
NOV DIVISIONS
© 2012 National Oilwell Varco
March 2012 FP 1006 A
top related