query tuning presented by: charles pfeiffer cio

Query Tuning

Presented by: Charles Pfeiffer

CIO

(888) 235-8916

AgendaAgenda

0800 – 0815: Introduction

0815 – 0900: Access Path Tuning

0900 – 0945: Advanced Tuning

0945 – 1000: Break

1000 – 1015: Call Your DBA (Submit a Ticket)

1015 – 1030: Wrap Up

1030 – 1100: Final Q&A

Query TuningQuery Tuning

Introduction

Meet The PresenterMeet The Presenter

Remote DBA Support for Liberty IT Staff Consultant for 12 years Several successful tuning engagements

– Reduced runtime averages from approximately 4 hours minutes to approximately 1 minute for over 100 reports

– Reduced runtime from 2 hours to 15 seconds for one query

– Reduced load time from 15 hours to 30 minutes

Who Are You?Who Are You?

Oracle Developers Background in any other DBs? Procedural Programming background? Object Oriented Programming background?

What Are We Talking About?What Are We Talking About?

Make your queries run faster The tools never work What can you do? What can the DBA do?

Why Do You Care?Why Do You Care?

Get more done Save time Growth = exponential increase Be a better neighbor!

The Tools Never WorkThe Tools Never Work

Bad Tools– Crystal Reports– Application Forms– Web Forms– ReportWriter

Good Tools– SQL*Plus – OEM– SQL Navigator– Toad

What Can Be Done?What Can Be Done?

What can you do?– Tune your query before releasing it into production

Most queries should complete in < 15 seconds. Many in < 1 minute

– Save baselines and good explain plans– Re-use good code

What can the DBA do?– Help you identify the problem and tune the query– Tune the DB and the system– Look at the problem with a different perspective

Query TuningQuery Tuning

Access Path Tuning

What Can We Tune?What Can We Tune?

Speed of Hardware

  Response Time

Typical Verbal

CPU 1,000,000,000 /Sec

3 GHz Billions of cycles / sec

Memory 1,000,000,000 of a Sec

10 – 50 ns (nano)

Billionth of a sec

Disk I/O 1,000 of a Sec

6 ms (milli transfer)

Thousandth of a sec

What Should We Tune?What Should We Tune?

Disk IO– Has the biggest impact on overall runtime– Known as access path tuning– Do less IO!– Do IO more efficiently

Do Less IODo Less IO

Use proper joins Use proper indexing Use views when appropriate Don’t do unnecessary sorts! Store common aggregate results – Materialized Views

Understanding GrowthUnderstanding Growth

Linear growth– Perfect 45° line on a graph– Typical pattern– Runtime doubles as the input (data set) doubles

Understanding Growth Understanding Growth (continued)(continued)

Exponential growth– Growth increases at an increasing rate– Worst case scenario– Runtime increases by at least 4x as the input (data set)

doubles

Understanding Growth Understanding Growth (continued)(continued)

Logarithmic growth– Growth increases at a decreasing rate– Best case scenario– Runtime increases by at least 4x as the input (data set)

doubles

Chart of RuntimesChart of Runtimes

Table To Illustrate Growth

Logarithmic Linear Exponential

1 1 1 1

10 1 10 100

100 3 100 10,000

1,000 7 1,000 1,000,000

10,000 10 10,000 100,000,000

100,000 13 100,000 10,000,000,000

1,000,000 17 1,000,000 1,000,000,000,000

10,000,000 20 10,000,000 100,000,000,000,000

100,000,000 23 100,000,000 10,000,000,000,000,000

Causes of Exponential GrowthCauses of Exponential Growth

Bad table joins – A = B and C= D– A/B are in one set, C/D in another– Nothing bridges the gap – Cartesian Product!

Heavy sort operations– Order by– Group by

Achieving Logarithmic GrowthAchieving Logarithmic Growth

Primary key index access!– All tables should have useful primary keys– All table joins should try to be foreign key > primary

key– All queries should try to use the primary key in the

where clause

Operations RuleOperations Rule

Operations– Any read or write is an operation– All operations take some amount of time– Most are minimal, but do add up– Simplify this argument: 1 operation = 1 unit (in time)

The best access path is the least costly one– Improve run time by reducing operations

Tuners RiddleTuners Riddle

What is the quickest way to fill in the blank?– Hint: Think mathematically rather than logically– Illustrates the false constraints we place on tuning

sessions– Think outside the box

Think about it - We’ll come back to it later

Best Practices In Query WritingBest Practices In Query Writing

Select only what you need – Stop doing select *

Use as many predicates as you can– Predicates are conditions in the where clause– Limit the result set – Better than having because they limit the data retrieved– Use AND, avoid OR– Avoid functions (to_date, upper, etc.)

Restructure data if necessary – Don’t live with bad designs

Best Practices in Query Writing Best Practices in Query Writing (continued)(continued)

Use literals– Where col1 = ‘ABC’– Encourages index usage– Finds the right data faster

Rules for TuningRules for Tuning

Don’t be afraid to try something (in Dev/Test/QA)– You can always make the problem worse– But you can also make it better

Tune one select at a time (sub-queries) Know when to stop. What is good enough? Review the explain plan

– Positives Index access for any table with more than 1,000

rows Index unique access Simplicity!

Rules for Tuning (continued)Rules for Tuning (continued)

Review the explain plan (continued)– Negatives

Cartesian Join Full Table Scan for tables with more than 1,000

rows Index Full Scan (sometimes) Complicated shape

Rules for Tuning (continued)Rules for Tuning (continued)

Review the explain plan (continued)– Things to do

Compare the predicates in the query to the index used

Add an index if necessary Use an index hint if necessary Modify join order and/or join type

Rules for Tuning (continued)Rules for Tuning (continued)

Indexes– Indexes grow Logarithmically– Can provide sorted output, sorts usually grow

exponentially– Only good for highly selective predicates (< 20% table)– Indexes can contain multiple columns, but must match

the query

Rules for Tuning (continued)Rules for Tuning (continued)

Types of indexes– B*Tree: Great for highly selective columns– Bitmap: Better for not-so-highly selective columns

Indexes Null Values!!!– Function-based: Needed if you use functions on

columns Avoid using functions on columns if you can Trunc(’2007-01-01 12:00:00’) > trunc(datestamp) Is the same as Trunc(‘2007-01-01 12:00:00’) > datestamp

Rules for Tuning (continued)Rules for Tuning (continued)

Hints– RECOMMENDS a path for the optimizer– Use table aliases not table names– If Oracle doesn’t take your hint, STOP!

You are missing something

Rules for Tuning (continued)Rules for Tuning (continued)

Common hints– /*+ INDEX(table index) */: use this index for this table– /*+ ORDERED */: read tables in the order of the from

clause– /*+ LEADING(table) */: lead with this table– /*+ use_hash(table1, table2) */: use hash joins for

these tables. Good for large data sets. Encourages full tablee scans.

– /*+ use_nl(table1, table2) */: use nested loops to join these tables. Good for small data sets. Encourages index usage.

Rules for Tuning (continued)Rules for Tuning (continued)

Join Order– Try to apply predicates in the most efficient manner– Optimizer picks the leading table based on:

Literal values in predicates Indexes on literal columns Table with the most selective index Primary Key Index that can avoid a sort

Answering the RiddleAnswering the Riddle

What is the quickest way to fill in the blank?

AnswerAnswer

Do nothing– It’s a blank– It doesn’t need to have any content– The operation to add a NULL or space character is

wasteful

Query TuningQuery Tuning

Advanced Tuning

Example QueryExample Query

SELECT I.CUST_CODE, R.RCPT_NUM, R.RCPT_REF_NUM INVOICE,I.INVT_LEV1, R.RCPT_ALT_REF1 LOC, I.INVT_LEV2,TO_CHAR(TRUNC(R.RCPT_CONF_DATE),'DD-MON-YYYY') RCPT_DATE,NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) CHG_TOT FROM RECIPT R,INVT_ACCSS I WHERE I.COMP_CODE = 'W8' AND I.CUST_CODE LIKE NVL('SCFLEADS','%') AND TRUNC(R.RCPT_CONF_DATE) BETWEEN TRUNC(to_date('01-JAN-2007','DD-MON-YYYY')) AND TRUNC(sysdate) AND UPPER(I.ACCSS_STAT) = 'A' AND I.INV_NUM IS

NOT NULL AND ((I.ACCSS_SRCE_REF_FLAG = 'R' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG IN ( 'R','A','E','B' )) OR ('Y' = 'Y' AND (I.ACCSS_SRCE_REF_FLAG = 'E' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG = 'E' ))) AND R.COMP_CODE = I.COMP_CODE AND R.RCPT_NUM = I.ACCSS_SRCE_REF_NUM GROUP BY I.CUST_CODE,R.RCPT_NUM, R.RCPT_REF_NUM, I.INVT_LEV1,R.RCPT_ALT_REF1,I.INVT_LEV2, TO_CHAR(TRUNC(R.RCPT_CONF_DATE),'DD-MON-YYYY') HAVING NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) > 0 ORDER BY 1,2,3;

Format The QueryFormat The Query

• Make it easy to read• Identify key parts of the query

• Select – Typically useless• From – Each table on a separate line• Where – Each condition on a separate line• Group By – Sorts. Influences index usage• Having – Typically useless• Order By – Sorts. Influences index usage

Formatted Example QueryFormatted Example Query

SELECT I.CUST_CODE, R.RCPT_NUM, R.RCPT_REF_NUM INVOICE, I.INVT_LEV1, R.RCPT_ALT_REF1 LOC, I.INVT_LEV2, TO_CHAR(TRUNC(R.RCPT_CONF_DATE), 'DD-MON-YYYY') RCPT_DATE, NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) CHG_TOT FROM RECIPT R, INVT_ACCSS I WHERE I.COMP_CODE = 'W8' AND I.CUST_CODE LIKE NVL('SCFLEADS','%') AND TRUNC(R.RCPT_CONF_DATE) BETWEEN TRUNC(to_date('01-JAN-2007','DD-MON-YYYY')) AND TRUNC(sysdate) AND UPPER(I.ACCSS_STAT) = 'A' AND I.INV_NUM IS NOT NULL AND ((I.ACCSS_SRCE_REF_FLAG = 'R' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG IN ( 'R','A','E','B' )) OR ('Y' = 'Y' AND (I.ACCSS_SRCE_REF_FLAG = 'E' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG = 'E' ))) AND R.COMP_CODE = I.COMP_CODE AND R.RCPT_NUM = I.ACCSS_SRCE_REF_NUM GROUP BY I.CUST_CODE,R.RCPT_NUM, R.RCPT_REF_NUM, I.INVT_LEV1, R.RCPT_ALT_REF1, I.INVT_LEV2, TO_CHAR(TRUNC(R.RCPT_CONF_DATE),'DD-MON-YYYY') HAVING NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) > 0 ORDER BY 1,2,3;

Establish A Baseline And Explain Establish A Baseline And Explain PlanPlan

SET TIMING ON SET AUTOTRACE ON

– Runs the query and displays the explain plan at the end

SET AUTOTRACE TRACE EXP– Just displays the explain plan

Establish A Baseline And Explain Establish A Baseline And Explain Plan (continued)Plan (continued)

Initial Run Time: 10 minutes , 17 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer=COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 NESTED LOOPS 4 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' 5 4 INDEX (RANGE SCAN) OF 'INV_ACS_IDX03' (NON-

UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'RECIPT' 7 6 INDEX (UNIQUE SCAN) OF 'RECIPT_IDX03' (UNIQUE)

Reading The Explain PlanReading The Explain Plan

Execution Plan--------------------------------------------------- 0 SELECT STATEMENT Optimizer=COST 1 0 |-FILTER 2 1 |-SORT (GROUP BY) 3 2 |-NESTED LOOPS | 4 3 |-TABLE ACCESS 5 4 | |-INDEX (RANGE SCAN) | 6 3 |-TABLE ACCESS 7 6 |-INDEX (UNIQUE SCAN)

Reading The Explain PlanReading The Explain Plan

Execution Plan--------------------------------------------------- 0 SELECT STATEMENT Optimizer=COST 1 0 |-FILTER 2 1 |-SORT (GROUP BY) 3 2 |-NESTED LOOPS | 4 3 |-TABLE ACCESS 5 4 | |-INDEX (RANGE SCAN) | 6 3 |-TABLE ACCESS 7 6 |-INDEX (UNIQUE SCAN)

TuneTune

Look for adequate table-joins Confirm Proper Function Usage Sufficient Index Usage Use Hints if Needed

Table JoinsTable Joins

• You cannot have un-joined sets of data• For tables A, B, C, and D

• GOOD• A – B – C – D• A – B A – C A – D

• BAD• A – B C – D (LEADS TO A CARTESIAN!!!)

Table Joins (continued)Table Joins (continued)

FROM– RECIPT R– INVT_ACCSS I

WHERE– AND R.COMP_CODE = I.COMP_CODE– AND R.RCPT_NUM =

I.ACCSS_SRCE_REF_NUM

FunctionsFunctions

Avoid using functions on columns in the where clause– Interferes with index selection

Excessive function usage increases processing time UPPER(I.ACCSS_STAT) = 'A‘ I.ACCSS_STAT = 'A‘ Another Solution

– I.ACCSS_STAT IN ('A','a')

Functions – New Explain PlanFunctions – New Explain Plan

RUN TIME: 8 minutes, 41 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer= COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 NESTED LOOPS 4 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' 5 4 INDEX (RANGE SCAN) OF 'INV_ACS_IDX07' (NON-

UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'RECIPT' 7 6 INDEX (UNIQUE SCAN) OF 'RECIPT_IDX03' (UNIQUE)

IndexesIndexes

Column order counts. Lead with the most selective columns

Review explain plan to see what indexes are being used Look at the query to see what columns should be indexed

– INVT_ACCSS: COMP_CODE, CUST_CODE ACCSS_SRCE_REF_NUM, ACCSS_STAT, INV_NUM, ACCSS_SRCE_REF_FLAG, ACCSS_SRCE_REF_CHG_TP_FLAG

– RECIPT: COMP_CODE, RCPT_NUM, RCPT_CONF_DATE

Indexes (continued)Indexes (continued)

CREATE INDEX INVT_ACCSS _TEST_IDX on INVT_ACCSS(COMP_CODE, CUST_CODE, ACCSS_SRCE_REF_NUM, ACCSS_STAT, INV_NUM, ACCSS_SRCE_REF_FLAG, ACCSS_SRCE_REF_CHG_TP_FLAG);

CREATE INDEX RECIPT_TEST_IDX on RECIPT(RCPT_NUM, RCPT_CONF_DATE, COMP_CODE);

Indexes – New Explain PlanIndexes – New Explain Plan

RUN TIME: 7 minutes, 26 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer= COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 NESTED LOOPS 4 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' 5 4 INDEX (RANGE SCAN) OF 'INV_ACS_IDX07' (NON-

UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'RECIPT' 7 6 INDEX (UNIQUE SCAN) OF 'RECIPT_TEST_IDX'

(UNIQUE)

DBA Had To Update Statistics – DBA Had To Update Statistics – New Explain PlanNew Explain Plan

Could have tried a hint! If it works then call for a statsupdate. If it doesn’t work something else is wrong

RUN TIME: 5 minutes, 3 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer= COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 NESTED LOOPS 4 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' 5 4 INDEX (RANGE SCAN) OF 'INV_ACS_TEST_IDX' (NON-UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'RECIPT' 7 6 INDEX (UNIQUE SCAN) OF 'RECIPT_TEST_IDX' (UNIQUE)

HintsHints

• Index / Full• Chose good index on its own after the statistics

update• Leading / Ordered

• We’ll try it – Select /*+ ORDERED */• Hash / Nested Loop

• We’ll try it if we still need help after Leading/Ordered hint

Hints – New Explain PlanHints – New Explain Plan

RUN TIME: 1 minute, 39 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer= COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 NESTED LOOPS 4 3 TABLE ACCESS (BY ROWID) OF 'RECIPT' 5 4 INDEX (UNIQUE SCAN) OF 'RECIPT_TEST_IDX'

(UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' 7 6 INDEX (RANGE SCAN) OF 'INV_ACS_TEST_IDX'

(NON-UNIQUE)

Hash Join vs. Nested LoopHash Join vs. Nested Loop

• Hash joins use a hashing algorithm to join tables• Select /*+ USE_HASH */

• Nested Loop joins use a nested loop to join tables; each row in one table cycles through EVERY row of the next table• Select /*+ USE_NL */

Hash Join – New Explain PlanHash Join – New Explain Plan

Run Time: 23 secondsExecution Plan---------------------------------------------------------- 0 SELECT STATEMENT Optimizer= COST 1 0 FILTER 2 1 SORT (GROUP BY) 3 2 HASH JOIN (Cost=33 Card=1 Bytes=346) 4 3 TABLE ACCESS (BY ROWID) OF 'RECIPT‘ (Cost=13 Card= 314

Bytes=36738) 5 4 INDEX (UNIQUE SCAN) OF 'RECIPT_TEST_IDX' (UNIQUE) 6 3 TABLE ACCESS (BY ROWID) OF 'INVT_ACCSS' (Cost=15 Card

=71 Bytes=16259) 7 6 INDEX (RANGE SCAN) OF 'INV_ACS_TEST_IDX' (NON-

UNIQUE)

Record The Good BaselineRecord The Good Baseline

Creates a record of the query’s improvement of run time Gives a record of what the baseline SHOULD be if there

are problems with the explain plan in the future.

Final Example QueryFinal Example Query

SELECT /*+ ORDERED USE_HASH */ I.CUST_CODE, R.RCPT_NUM, R.RCPT_REF_NUM INVOICE, I.INVT_LEV1, R.RCPT_ALT_REF1 LOC, I.INVT_LEV2, TO_CHAR(TRUNC(R.RCPT_CONF_DATE), 'DD-MON-YYYY') RCPT_DATE, NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) CHG_TOT FROM RECIPT R, INVT_ACCSS I WHERE I.COMP_CODE = 'W8' AND I.CUST_CODE LIKE NVL('SCFLEADS','%') AND TRUNC(R.RCPT_CONF_DATE) BETWEEN TRUNC(to_date('01-JAN-2007','DD-MON-YYYY')) AND TRUNC(sysdate) AND I.ACCSS_STAT = 'A' AND I.INV_NUM IS NOT NULL AND ((I.ACCSS_SRCE_REF_FLAG = 'R' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG IN ( 'R','A','E','B' )) OR ('Y' = 'Y' AND (I.ACCSS_SRCE_REF_FLAG = 'E' AND I.ACCSS_SRCE_REF_CHG_TP_FLAG = 'E' ))) AND R.COMP_CODE = I.COMP_CODE AND R.RCPT_NUM = I.ACCSS_SRCE_REF_NUM GROUP BY I.CUST_CODE,R.RCPT_NUM, R.RCPT_REF_NUM, I.INVT_LEV1, R.RCPT_ALT_REF1, I.INVT_LEV2, TO_CHAR(TRUNC(R.RCPT_CONF_DATE),'DD-MON-YYYY') HAVING NVL(SUM(NVL(I.CHG_TOT,0) + NVL(I.CHG_TAX1,0) + NVL(I.CHG_TAX2,0) ),0) > 0 ORDER BY 1,2,3;

Keep In MindKeep In Mind

Most queries only need one or two changes to significantly improve run time

This example is an extreme case DBAs can help – update statistics, etc.

Query TuningQuery Tuning

Break!

See you in 15 minutes

Query TuningQuery Tuning

Call Your DBA:

Submit A Ticket

Call MeCall Me

Submit a ticket or contact me for help– (888) 235-8916

– CJPfeiffer@RemoteControlDBA.com We can see things you can’t

– SQL Trace & Statspack– DB Parameters– OS/Storage Configuration– Advanced Explain Plan Analysis

We Have More ToolsWe Have More Tools

DBAs have additional tools to make things work– More hints– Statistics– Complex views– Materialized Views– Stored Outlines

SQL Trace & StatspackSQL Trace & Statspack

Identify exactly where the DB/query is spending time Identify sources of contention Tune the DB / Instance if needed Identify lack of resources in the DB/server/storage

StatisticsStatistics

Tells Oracle how much data is in each structure Allows Oracle to choose the “best” access path May be out of date May not influence the DB properly

More HintsMore Hints

Oracle has over 100 hints Many of them require knowledge of the DB and Optimizer Many of them override init parameters DBAs can gauge the impact of hints on the overall system

Complex ViewsComplex Views

Can be used in place of sub-queries Allows Oracle to choose more orderly access paths Can be used to organize the result set

Materialized ViewsMaterialized Views

Best used when you can pre-calculate aggregates Store complex result sets to retrieve/join in other queries Huge impact on computational queries

– Large sum functions– Having clause– Large group by clause

Stored OutlinesStored Outlines

We only need to get it to work once– Oracle evaluates queries at run time– Chooses a new access path each time a query runs– Dependent on up-to-date statistics and volume changes

Find a good explain plan and store it– Once we have a good one we can assign it to a query– Oracle will use it every time the query runs– Ignores changes to data volume and statistics

Query TuningQuery Tuning

Wrap Up

SummarySummary

Be aware of tools that create poorly written queries Growth = Exponential increase Be a good neighbor! Tune queries before you release them into production

– Does your query run in < 1 minute? < 15 seconds? Access Path Tuning Advanced Tuning

Summary (continued)Summary (continued)

Access Path Tuning– Bottom line – Do less work (operations)– Use good table joins – A=B, B=C, C=D not A=B, C=D– Use good indexes – Primary Key is best– Use literals– Hints can help– Avoid sorts and functions

Summary (continued)Summary (continued)

Advanced Tuning– Format the query so it is easy to work with– Baselines and explain plans

Get a baseline and explain plan to start outGet new baselines and explain plans when

you make changesKeep the final baseline and explain plan

Summary (continued)Summary (continued)

Advanced Tuning (continued)– Tune

Table joins Function usage Indexes Hints

– Index– Order– Join Type

– Most Queries only need one change to bring them in line

Summary (continued)Summary (continued)

We solved two problem queries together!– It really isn’t that hard– Follow a step-by-step approach to resolving the query– Remember the goal - < 15 seconds. < 1 minute is OK.– Don’t get caught up with a 5X improvement

5 hours to 1 hour is good 5 hours to 1 15 seconds is better It is possible!

Summary (continued)Summary (continued)

Your DBA can help– Look at the DB Parameters– Look at the OS and Storage– Identify where you are spending time and contention– Hints– Statistics– Complex views and materialized views– Stored outlines– Beat it with a stick!!!

This PresentationThis Presentation

This document is not for commercial re-use or distribution without the consent of the author

Neither CRT, nor the author guarantee this document to be error free

Submit questions/corrections/comments to the author:– Charles Pfeiffer, CJPfeiffer@RemoteControlDBA.com

Query TuningQuery Tuning

Final Q&A