product overview - cdn.thomasnet.com
Post on 14-Mar-2022
8 Views
Preview:
TRANSCRIPT
PRODUCT OVERVIEW
’
Max-Air Technology
5/2011 Rev 6
Max-Air Technology751 Hoff RdO'Fallon, MO 63366P 1.888.842.8588F 1.866.842.3144www.max-airtechnology.cominfo@max-airtechnology.com
2 PRODUCT OVERVIEW
Evolution In Engineering Rack & Pinion Actuators
Features & Benefits• The MAX-AIR rack & pinion pneumatic actuator
produces linear torque output in a compact design utilizing the same body and end caps for double acting and spring return units.
• NAMUR VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid valves, limit switches or positioners.
• The standard angle of rotation is 90º. Additional travel rotations of 120º, 135º, 150º and 180º are available. UT16 through UT66* feature a travel stop with ±10º adjustment in both open and closed directions (International Patent).
• The “patent pending” bottom plate design, unique to MAX-AIR, secures a captive pinion (anti-blowout system) and permits flexibility in mounting by retaining AISI 304 nuts (standard) or AISI 304 bolts (optional) in either dual ISO patterns, or to customer dimensions.
• All pinions are supplied with anti-blowout retention in both directions.
• The female pinion drive is standard with a double square output drive and optional with a double-D drive, keyed drive and designs to meet your specific requirements.
• Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle applications.
• The pinion teeth are engaged for the full length and stroke of the piston. The pinion height allows manual override without disturbing the position indication.
• Extruded aluminum body is internally machined and lapped to exact specifications. All internal and external surfaces are anodized for corrosion resistance and wear enhancement.
• External open/closed indicator is standard, available for all rotations.
• Pistons incorporate double wear pads to separate the rack from the actuator wall and serve as both guide and wear bearings.
• Epoxy coated special steel springs are pre-loaded with non-metallic materials. The stainless steel end cap fasteners are extra long to allow for spring relaxation. All parts are corrosion resistant.
• Air pressure operation from 40 to 150 PSI. Water, nitrogen and compatible hydraulic fluids may also be used to power the actuator by utilizing one of the specialty coatings described on page 10.
• All external fasteners are corrosion resistant stainless steel.
• All units are permanently lubricated at the factory with non-silicone grease.
• All units are externally stamped with a progressive traceable serial number.
• 100% of all units are factory pressure and leak tested, and individually boxed for shipping.
*UT71 and UT76 offer 5° stroke adjustment on the opening phase of the actuator.
AL
UM
INU
M
AC
TU
AT
OR
S
Introducing the NEW Max-Air Unlimited Cycle Life Warranty* *Refer to document MA020107W for details
PRODUCT OVERVIEW 3
AL
UM
INU
M
AC
TU
AT
OR
S
Exclusive to MAX-AIR
Bi-Directional PatentedTravel Stop I l lustrationMAX-Air actuators feature a bi-directional travel stop (International Patent). Side located stops allow a ±10° adjustment in both closing and opening directions, providing a range of adjustment between 70° and 110° of actuator stroke.
Travel stops are designed to absorb the maximum rated torque of the actuator and the maximum impact load associated with recommended speed stroke.
Adjustment of the counter clockwise and clockwise rotation is accomplished by turning the respective left (MAX) and right (0°) adjustment screws to increase or reduce output rotation.
Body:Extruded aluminum body (ASTM B210 6063) is internally machined to exact specifications and lapped to reduce friction and increase the life of seals and skates. All internal and external surfaces are anodized for corrosion resistance. Options: hard anodizing with PTFE coating, epoxy powder coated units or autocatalytic nickel impregnated body protection.
End caps and pistons:Die-cast aluminum pistons are epoxy powder coated (internal and external) for corrosion resistance; corrosion resistant technopolymer pistons are supplied in the UT12 units. Die-cast aluminum end caps are epoxy powder coated (internal and external) for corrosion resistance in the UT21 and larger models; corrosion resistant techno-polymer end-caps are supplied in the UT11, UT14 and UT19 models.
Spring cartridges:Springs are carbon steel and coated for corrosion resistance. Spring guides are corrosion resistant technopolymer.
Pinion:Carbon steel/electroless nickel coated for all sizes (stainless steel available on request as option).
Seals:Temperature range from -4ºF to 176ºF with standard BUNA-N nitrile seals. Higher temperature with optional VITON® seals and techno-polymer piston guides and bearings (250ºF continuous and 300ºF cyclic). Lower temperature available with silicone seals (-40ºF).
Note: Standard temperature rating for Canadian market is -40ºF to 500ºF with silicone seals.
Bearing pad:Technopolymer. Large contact area, high performance, long life resistance.
Indicator:OPEN/CLOSED standard in technopolymer material for 90º and 180º.
Flange:Technopolymer or die-cast aluminum material. This is our anti-blowout pinion system (Patent pending).
Double travel stop:A double travel stop (International Patent) with ±10° adjustment in both open and closed directions in the UT16 through UT66. UT71 and UT76 offer 5° stroke adjustment on the opening phase of the actuator.
NOTE: For temperatures above 350˚F, special high-temperature lubricant must be used. NOTE: Max-Air has introduced a
new flangeless MT SERIES actuator in 2010. For more information visit www.max-airtechnology.com
4 PRODUCT OVERVIEW
TE
CH
NO
PO
LY
ME
R
AC
TU
AT
OR
S
• Double Acting or Spring Return with spring cartridges made with non-metallic materials (springs are epoxy coated).
• Carbon steel electroless nickel pinion with anti-blowout protection in both directions.
• The pinion’s lower drive connection is a double square according to ISO 5211/DIN 3337 standards, for ease of valve assembly.
• Upper drilling for accessories and upper pinion machining according to NAMUR VDI/VDE 3845 standards.
• Solenoid valve connection according to NAMUR VDI/VDE 3845 made with an insert in alloy UNI 5076 (ASTM B 179) coated with high corrosion resistance material. Air connections are 1/4” NPT.
• Supply: air (lubricated if possible), hydraulic oil or water, min 40 PSI - max 120 PSI.
• Standard working temperature: -4ºF +176ºF• Progressive serial number stamped for traceability.• 100% seal and running test carried out on electronic
equipment.
DIRECT MOUNTCOMPACT DESIGN
Features & Benefits
TECHNOPOLYMER ACTUATORS The Max-Air line of thermoplastic actuators is designed to withstand the most arduous environments. Available in three sizes, your applications requiring plastics and corrosion resistance is covered up to 500 in-lbs of torque (Double–Acting).
Ask About Our GRPP Actuators!
(Glass-Reinforced Polypropylene)
PRODUCT OVERVIEW 5
LIM
IT
SW
ITC
H
BO
X
Quick set cams.The operating position of the switches can be easily changed by adjusting the high resolution spline cams both manually and independently, without the need for additional tools. This operation is electrically safe due to the insulation of the wiring strips and the micro switches. The cams are spring backed and will not be affected by normal vibration.
Compact design.The MAX-AIR Limit Switch Box has a compact construction, minimizing valve package envelope size.
Easy wiring.Despite its compact design, MAX-AIR Limit Switch Boxes are easy to wire up with plenty of room to bring wires into the enclosure. As standard, they have two conduit entries 1/2” NPT. MAX-AIR Limit Switch Boxes are equipped with 2 different removable strips as standard, the first one with 8 terminal points and the second one with 2 points; therefore, dual coil solenoid valves can be connected. The terminal strips are angled to allow for ease in attaching external wires.
Inclusive mounting bracket.A technopolymer mounting bracket is supplied as standard with each MAX-AIR Limit Switch Box and it fits the NAMUR top mounting hole spacing 80 mm by 30 mm. The bracket allows the use of standard NAMUR stem heights of 30 mm and also 20 mm (coupling included with each unit).
High visibility indicator.Our tri-dimensional indicator offers clear location of the current valve position for 90°-120°-135°-150°-180° angles.
Options
MAX-AIR Limit Switch Box is offered with 2 mechanical micro switches or several different types of proximity sensors.
Switches are available pre-wired to watertight or other types of specialty connectors.
L IM IT SWITCH BOX The MAX-AIR series of Limit Switch Boxes represent a completely new dimension in limit switches for actuators. Manufactured completely in technopolymer with stainless steel fasteners and NEMA 4, 4x (IP65) rating, these products are corrosion resistant and suitable for the most arduous environments.
MECHANICAL MICRO SWITCH
6 PRODUCT OVERVIEW
AL
UM
INU
M
LIM
IT
SW
ITC
HE
S
ALUMINUM LIMIT SWITCHESFeatures“Quick Set” CamsThe operating position of the switches can be easily changed by adjusting the high resolution spline cams manually and independently without the need for additional tools. The cams are spring backed and will not be affected by normal vibration.Compact DesignThe Max-Air MS41-2AL is a very compact limit switch box, thereby allowing maintenance of a smaller valve envelope size.Easy WiringMS41-2AL is equipped as standard with two (2) conduit entries, 1/2” NPT and one (1) terminal strip with 8 points, angled to allow for easy wiring.High Visibility IndicatorThe MS41-2AL comes standard with a high visibility beacon, offering clear location of the current valve position.Captive Cover BoltsThe switchbox also comes standard with stainless steel captive cover bolts.Mounting BracketNAMUR 80x30 H30 stainless steel bracket supplied as standard with stainless steel fastening hardware for ease in mounting the switchbox onto the actuator. MS41-2AL can be mounted on NAMUR H20 actuators through a technopolymer coupling.
Ask About Our New Universal Mounting Bracket in 303 SS.
MS41-2AL2 Mechanical Switches
IS41-2AL2 Inductive Proximity Sensors
PS41-2AL2 Magnetic Proximity Sensors
Mechanical Switches 3A @ 250 V AC
Proximity Switches See Ordering Information
Magnetic Switches Max 48 VDC @ 0.25A-5W Max
Electrical Rating
Specification Standard
Enclosure Protection IP67/NEMA 4/4x
Temperature Range -4°F to 176°F
Conduit Entries 1/2” NPT
Switches See Below
Terminal 8 Points
External Coating Black Epoxy Powder Coating
Weight 1.76 lbs
Available ATEX II 3 D and ATEX II 2 G D (EExia) approved.
Ask about our CSA listed switches.
Also available in Stainless Steel.
PRODUCT OVERVIEW 7
SO
LE
NO
ID
VA
LV
ES
-NA
MU
R
TY
PE
• Design according to NAMUR VDI/VDE 3845.• Universal usage: can be mounted on all types
of pneumatic actuators (rotary or linear) with a NAMUR connection.
• Port size: inlet and exhaust 1/4” NPT.
• Versions: single coil, dual coil and 3 position (open centers, closed centers or center in pressure).
• Manual override as standard (lockable).
• Nylon coil, insulation class F, as standard; technopolymer coil, insulation class H as optional.
• Protection class NEMA 4, 4x (IP65) standard. Optional:
“Intrinsically Safe EExi” “Explosion Proof EExm” “Explosion Proof EExd (NEMA7)”• All units are stamped with a progressive traceable
serial number.
SOLENOID VALVES: NAMUR TYPE The Max-Air NAMUR series solenoid valve is a revolution in design featuring an electroless nickel plated spool, easy-to-use manual override, (lockable) and the fact that each solenoid valve is field convertible for use on either double acting (4 way) or spring return (3 way) actuators, you will be way ahead of your competition.
Each solenoid valve is available in single coil (SV61), dual coil (SV62) or 3 position configuration (SV3P–Open, Closed or Centers in Pressure) and can be used on either lubricated or non-lubricated air.
Features & Benefits
SV61 Series NEMA 4/4x, IP65, any voltage
SV71 SeriesIntrinsically safe, 24 VDC(not pictured)
SV91 Series NEMA 7/9 Explosion Proof, any voltage
Dual Coi l Series All configurations shown
are available with dual coils.
3 Position Versions Open Centers
Closed CentersCenters in Pressure
Ask About Our Solenoids Listed to
NOTE: All solenoids also available with HIGH TEMPERATURE (-HT) VITON® Seals.
Accessories
Speed Control Mufflers
Exhaust Mufflers
3-Way & 4-Way Adapter Plates
8 PRODUCT OVERVIEW
PO
SIT
ION
ER
S
ROTARY VALVE POSIT IONERS Max-Air offers both single & double-acting valve positioners, with input signals of 4-20 mA and 3-15 PSI configurations, for proportional control of rotary actuators. The positioners operate on the force-balance principal by comparing the standard signal transmitted from a pneumatic or an electro–pneumatic device and the angular rotation of the operating stem, and conveys a positioning amplified pressure to the valve actuator. Offered in NEMA 4/4X, explosion proof and intrinsically safe environments. Please call our sales team at (636) 272–4934 for more information.
Ask About Our Full Line of Linear Postioners!
POSITION TRANSMITTER &LIMIT SWITCHES Max-Air offers a stand-alone direct mount position transmitter (PTM01) and a stand-alone position transmitter with internal limit switches (PTM02). The position transmitter and limit switches can also be ordered as an option within the desired rotary positioner. Please call our sales team at (636) 272-4934 for more information.
Independent Position Transmitter
Ask about the certifications available. Call our sales team at (636) 272–4934 for more details.
PRODUCT OVERVIEW 9
RO
TA
RY
PO
SIT
ION
ER
S
LS = Limit Switch PTM = Position Transmitter DA = Double Acting SR = Spring Return
AVAILABLE POSITIONER MODELS
Pneumatic Positioners with GaugesPNY01–3-15 PSI, Universal MTGPNY02–3-15 PSI, Universal MTG, LSPNY03–3-15 PSI, Universal MTG, PTMPNY04–3-15 PSI, Universal MTG, LS + PTM
Electro-Pneumatic Positioners with Guage PEY01–4-20 mA, Universal MTG
PEY02–4-20 mA, Universal MTG, LSPEY03–4-20 mA, Universal MTG, PTM
PEY04–4-20 mA, Universal MTG, LS + PTM
Explosion Proof Electro-Pneumatic PositionersPEX01–4-20 mA, Universal MTGPEX02–4-20 mA, Universal MTG, LSPEX03–4-20 mA, Universal MTG, PTMPEX04–4-20 mA, Universal MTG, LS + PTM
Stainless Steel Electro-Pneumatic PositionersPES01–4-20 mA, DA, Universal MTGPES02–4-20 mA, SR, Universal MTG
PES03–4-20 mA, DA, Universal MTG, LSPES04–4-20 mA, SR, Universal MTG, LS
PES05–4-20 mA, DA, Universal MTG, PTMPES06–4-20 mA, SR, Universal MTG, PTM
PES07–4-20 mA, DA, Universal MTG, LS + PTMPES07–4-20 mA, SR, Universal MTG, LS + PTM
Use of f i lter regulator is the key to long l ifeperformance!
Independent Position TransmittersPTM01–Position Transmitter, MTGPTM02–Position Transmitter + LS, MTG
High & Low Temperature Adder–All PositionersTEA01–High & Low Temperature Adder
High Vibration Electro-Pneumatic PositionersPEVX01–Remote Smart High Vibration, DA, PTMPEVX02–Remote Smart High Vibration, SR, PTM
Positioner Assembly & Piping OptionsTUBING-SS–SS Tubing + SS FittingsTUBING-NYLON–Nylon Tubing + Air FittingsTUBING-TEFLON–High & Low Temp + Air Fittings
Options
Smart PositionersPE-SMART-DA–SMART 4-20 mA, DAPE-SMART-SR–SMART 4-20 mA, SR
Smart Positioners–Stainless SteelPES-SMART-DA–SS SMART 4-20 mA, DAPES-SMART-SR–SS SMART 4-20 mA, SR
Smart Positioners–Explosion ProofPEX-SMART-DA–EXPL PRF SMART 4-20 mA, DAPEX-SMART-SR–EXPL PRF SMART 4-20 mA, SR
Smart Positioners–Optional FeaturesPTA01–Smart Position Transmitter AdderHCA01–Smart Hart Protocol AdderLSA01–Smart Limit Switch Adder
GO SMART!
Max-Air Positioner Product Legend
10 PRODUCT OVERVIEW
SP
EC
IAL
C
OA
TIN
GS
Material/Finish Aluminum: Hard Anodized
Aluminum: Anodized w/
Polyamide Epoxy coating
Aluminum: Electroless
Nickel Infused
Aluminum: PTFE/PFA Coating
Stainless Steel: 300 series
AppearanceSilver-gray with
a low gloss appearance
Black with a medium gloss
finishMedium gloss silver finish
Glossy black/ optional white
finish
Silver; low to medium gloss
unless polished
General Properties
Good general corrosion
properties in most “natural” environments with pH from
4.5 to 8.5. Good resistance to salt air environments.
The coating is extremely hard and resistant to
abrasion.
This epoxy coating is a
relatively thick coating which
creates a barrier against many of the chemicals
which anodizing alone cannot
adequately resist. It will resist more acidic
or basic environments than anodizing
alone.
Uniformly thick coating with essentially no porosity and a reasonably high hardness. The coating is pure,
tough, hard, and resistant to many types of
corrosion media.
This coating provides
complete surface coverage and
exhibits excellent corrosion resistance
properties in a wide variety of applications. In addition, it is
FDA approved for food contact.
304 and 316 Stainless steel are the most commonly
used alloys. Both have
good corrosion resistance but
316 is generally considered superior,
however more expensive.
Relative Cost to Purchase
Lowest cost option Moderate Moderately high Moderately high
Highest cost option by a
significant margin
Performance Limitations
Highly acidic or basic
environments will break down the
coating.
Good general corrosion
resistance, particularly
in salt or alkaline environments.
Limited resistance to acids. Surface
chalking will occur when exposed to UV radiation. Also suitable for low
concentrations of caustic washdown
solutions.
The coating will provide enhanced
corrosion protection in very acidic
environments but will not
withstand attack from strong
alkaline media. Also suitable for low to medium concentrations
of caustic washdown solutions.
These coatings are resistant to
any environment into which an
actuator would be installed. Provided the
integrity of the surface is intact, the coating can resist a broad
array of chemical environments
at temperatures ranging from sub-
zero to over 300 degrees F.
Although Stainless Steel
does offer enhanced corrosion
resistance, it also is dramatically higher in both
cost and weight. The weight
differential will often necessitate the use of special
support bracketry.
View
SPECIAL COATINGS Max-Air offers a wide variety of actuator coatings which extend the limits of service for aluminum actuators. These coatings provide economical alternatives to stainless steel in a wide variety of applications, extending the boundaries of the traditional service limits for aluminum actuators. From salt spray to immersion to caustic washdown environments, our specialty coatings can solve your actuation problems without the extreme cost of stainless steel.
I ncreased Corros ion Res istance
PRODUCT OVERVIEW 11
SP
EC
IAL
AP
PL
ICA
TIO
NS
180° Actuators
180°/150°/135°/120° Double Acting ActuatorsMax-Air Technology offers a complete range of extended-body double acting actuators, from 120° up to 180°. These options allow you to choose the actuator that best fits your application instead of the actuator dictating your automation requirements. (Note: 120° actuators are also available in spring return configuration.)
SPECIAL APPLICATIONS Max-Air Technology is committed to providing the widest range of application solutions with the greatest degree of mounting flexibility possible. With solutions like these listed below, Max-Air is committed to solving your most challenging applications.
Electro-hydraulic Actuators(self-contained unit)A unique approach to providing operational self-containment, Max-Air offers this spring-return unit ready to operate without preparing any complicated controls or wiring. Please call or visit our website for more information; www.max-airtechnology.com.
Dribble Control: 3/4 Position ActuatorsCompletely integrated solution integrating a Combination Limit Switch and Solenoid box for any DA or SR 3/4 position Control application.
Accumulator Tank Options
Spring Return 180° ActuatorsAfter careful study, Max-Air Technology is pleased to introduce our spring return 180° actuator. This solid solution will give you a lifetime of consistent performance without hassling with oversized actuators. The Max-Air 180° Actuator maintains the same high output torques as our standard actuator.
180° Center Return Spring Actuators(-90°, +90°, Return to Center)For applications where returning to center is imperative, Max-Air has this optimal solution. Specially designed and machined, this unit saves hours of engineering redesign when applications require failing to center.
Max-Air Technology offers a full line of competitive declutchable gear overrides for emergency system control. The PV01 series is lightweight, has an ISO 5211 mounting pad for ease of mounting, and ISO 5211 DSQ connection. Suitable for both double acting and spring return applications.
Max-Air Technology offers a full line of ISO 5211 designed worm gear operators for control on manual valve
applications. The line offers ISO 5211 mounting pad and DSQ output connection for ease of mounting onto any existing valve.
PV01 Series Declutchable Gear Box
GO-ISO Worm Gear:
Your nearest Max-Air dealer can be found at:
Max-A i r Techno l ogy Cus tomer Serv i ce 1 . 888 .842 .9998rev. 7.14.09
Did you know that we provide the following services?
• 2D and 3D CAD Assembly Drawings• Trained Technical Support Services• On–site Commissioning Services• Engineering System Design Services
The Best Way to Automate Your Process
top related