problem: solution · 2006-2011 audi a6 ck620618 2005-2011 audi a6 quattro 2004-2011 audi a8 quattro...
Post on 26-Jul-2020
18 Views
Preview:
TRANSCRIPT
tech line: 1-800-325-8886
moogproblemsolver.com
www.FMe-cat.comFor parts lookup, visit
SOLUTION:PROBLEM:
NOT GREASEABLE
The premium forged aluminum MOOG® upper control arm design incorporates a MOOG Problem Solver® ball joint as well as a pre-installed premium MOOG bushing. Its many features deliver improved vehicle safety and handling, make installation easier, and enable a proper alignment.
• Exclusive gusher bearing technology assures durability and long life.
• Greaseable design flushes contamination and keeps part lubricated.
• MOOG patented domed cover plate and Belleville washer ensure proper preload and consistent socket torque for the life of the part.
• Full-ball metal stud features a chromate coating to prevent galvanic corrosion when in contact with the aluminum knuckle.
• Includes a new pinch bolt.
©2013 Federal-Mogul Corporation. MOOG and The Problem Solver are trademarks owned by Federal-Mogul Corporation, or one of its subsidiaries, in one or more countries. NASCAR and the NASCAR Performance logo are registered trademarks of the National Association for Stock Car Auto Racing, Inc. All rights reserved. Form# 213001
B U L L E T I N : 2 1 3 0 0 1
Audi A6 / Audi A8
CK620618/CK620619 upper Control
Arm
moog® problem Solver® CK620618/ CK620619 upper Control Arm
non-serviceable design
The OE part is not greaseable, which means that any trapped contamination can’t be flushed. This vehicle requires coating on the ball stud to prevent galvanic corrosion. This corrosion occurs when an uncoated steel ball stud contacts the vehicle’s aluminum steering knuckle. Not all suppliers provide this coating on the steel stud, compromising the integrity of the part. In addition, some suppliers may utilize a low-end plastic bearing that lacks sufficient strength for long-term performance. Also, the geometry of some suppliers’ replacement parts may not precisely match OE specs, creating installation difficulties.
Description Years Make/Model Part Number
Front Left Upper Control
Arm
2006-2011 Audi A6
CK6206182005-2011 Audi A6 Quattro
2004-2011 Audi A8 Quattro
2004-2006 Volkswagen Phaeton
Front Right Upper Control
Arm
2006-2011 Audi A6
CK6206192005-2011 Audi A6 Quattro
2004-2011 Audi A8 Quattro
2004-2006 Volkswagen Phaeton
GREASEABLE DESIGN
DOMED COVER PLATE
BELLEVILLE WASHER
COATED BALL STUD
SEALED BOOT
METAL GUSHER BEARING
SUNALOY® COATED
UPPER BEARING
PLASTIC BEARING
CUTAWAY VIEW
top related