pointers. variable declarations declarations served dual purpose –specification of range of values...

Pointers

Variable Declarations

• Declarations served dual purpose– Specification of range of values and operations– Specification of Storage requirement

• All programs required FIXED amount of memory– number of variables fixed by the declaration – decided by their types

• One exception: Allocatable array– Size of the array depends upon input

Static and Dynamic Allocation

• Compiler uses the declaration to allocate memory for a program

• Static allocation (or fixed memory requirements) leads you to be conservative

• Wastage of space and poor performance for some inputs

• Analogy: Two-way traffic in City roads

• Better management: allocate on demand– Initially allocate minimal

– Allocate more when needed

– Deallocate when not needed

– Dynamic Memory management

Dynamic Memory allocation• Memory allocation not fixed • nor done at compile-time• It is done at run-time• at run-time no declarations - only executable

instructions• need special instructions for allocation - executable

declarations so to say• Allocate and Deallocate constructs for dynamic

arrays• we need more general mechanism for arbitrary

organization of data

Pointers• One problem with dynamic allocation:• How do we access the newly allocated memory

locations• How did we access the statically allocated memory?• Access the new locations by their addresses• This is against the principle of high level languages:

– abstract memory locations and machine details– disallow direct control over resources – unsafe

• is there any other way?• pointer variables is a compromise• Pointer variable contains addresses rather than data

values• Addresses point to the newly allocated memory

locations and hence called pointers

Pointer variables• They store addresses that identify locations

where actual data values reside• Pointer variables declared statically so compiler

can allocate memory• Static declaration of pointer variables! That is

funny– we do not know a priori our memory requirement and

hence our quest for dynamic memory locations

• Static declarations can allocate only a fixed number of pointers

• How do we create and access unbounded number of locations

• Answer: Dynamic creation of pointers themselves (more on this later)

Pointer variable Declarations• Declarations specify types - set of data values and

operations• What types pointers are or should be?• Pointer variables store addresses• Addresses are numerical values - non negative

integers• Are they non negative integers? No, quite a different

kind• Pointers always contain same type of values

whatever they point to– Can point to integers, reals, characters, arrays or

structures• Are all pointers of the same type

Pointers are of different types• Only way of accessing dynamic objects is

through pointers• What is pointed to is distinguished - real,

integer, character, array etc.• Essential to distinguish the pointers for the

same reason• So Pointers are of different types:

– integer pointer, real pointer, array pointer, etc

• Pointer types are decided by the types of those pointed to

• Declarations specify these

Pointer Declarations• Examples:

integer, pointer:: p1, p2real, pointer:: r1, r2

integer, dimension(:), pointer:: array_ptrreal, dimension(:,:), pointer:: matrix_ptr

• These declarations allocate memory for the pointer variables

• Pointer variables have addresses like normal addresses

• But they store addresses - the addresses will be assigned dynamically (during execution)

• Addresses assigned should correspond to locations where data values with the specified type is stored

• Special statements are provided for this purpose

Target variables• Simplest pointer assignment:

– store the address of a location allocated for a variable

• Example:p1 => xr1 => zmatrix_ptr => m

where– p1,r1, matrix_ptr as before– x,z,m are integer, real and matrix variables

• The types should match• rhs variables resolved to addresses!

– contrast with conventional assignment

Pointer assignment

 x

z

m

p1

r1

matrix_ptr

Target declarations• For a variable to act as target explicit

declaration required:

integer, target :: x

real, target :: z

integer, dimension(10,10), target :: matrix_ptr

Targets can be pointers• Suppose p1 and p2 are of pointers of the same type

• Further suppose p2 points to a location of appropriate type

• Then

p1 => p2

• makes p1 point to whatever p2 points to

Before Assignment

p1

p2

After assignment

p1

p2

Dereferencing of pointers• Two meanings for pointers in

p1 => p2• p2 has an address and contains another

address• What is assigned to p1 is the content of p2• p2 on the rhs refers to the contents of p2

rather than p2 itself• This is called Dereferencing• Contrast this when target is ordinary variable

p1 => x– what is assigned here is not the content of x but

the address of x

Another example

• Consider

write *, p1, p2

• What is printed?• The address associated with p1,p2?• No, the values stored at those

addresses• The pointers are dereferenced to get

the values

Pointers in Normal Assignment• Pointers can appear in normal assignments:

1. p1 = p22. p1 = p2 + p3

• Suppose, p1, p2 and p3 points to targets x, y and z

• The above is equivalent to1. x = y2. x = y + z

• Note that p1 is also dereferenced here

Rules for dereferencing=>• The lhs should be evaluated to an address (or

pointer)• The rhs should also evaluate to an address

=• The lhs should evaluate to an address• The rhs should evaluate to a value

print *, x– x should be a value

• So the rule is:Dereference the pointer as much required to evaluate to appropriate value

Use of Pointers• Suppose you wish to exchange two arrays arr1, arr2 of

Dimension(100,100)• Solution 1:

temp = arr1arr1 = arr2arr2 = temp

• involves exchange of 10,000 values!• Solution 2:

Real, Dimension(:,:), pointer:: p1,p2,tempp1 => arr1p2 => arr2temp => p1p1 => p2p2 => temp

• Exchange of just two pointers

Dynamic Allocation of Memory• So far, pointers point to already existing

variables

• The amount of used memory is still static

• For dynamic memory requirement, additional mechanism needed

• Allocate and Deallocate instructions

• Allocate ‘creates’ required memory and decllocate ‘destroys’ memory

Allocate Command• Simplest allocate statement

Allocate(p, stat = s)

• This allocates appropriate memory space,

• address pointed to by the pointer p

• s returns an integer value which indicates whether allocation successful or not

s = 0 means success,

failure otherwise

• Stat = is optional but should always be used

• If allocation fails and if no stat = clause, then the program will abort

Some examplesinteger, pointer:: p1integer, dimension(:):: p2...allocate(p1, Stat=p1_stat)allocate(p2(1:10), Stat = p2_stat)'''"

p1 = x + yp2(2) = p2(1) + p1

• Note the dimension specification in p2 declaration

Deallocate Command• Memory created using Allocate command can

be destroyed when not needed– Deallocate(p, Stat = p_stat)

• Deallocates the memory, if p_stat = 0• What does p point to after this command?• It points to null value• Pointer assignment or allocation associates

the pointer with some address• Deallocation breaks this association• Referring to pointer that is disassociated is an

error– The program will abort

Checking Association• To avoid aborting, association status of pointer

should be checkable• Intrinsic function Associated used for this purposeassociated(p)• returns the value .TRUE. iff p is associated with a

target• A more general form is

associated(p, tvar)• returns .TRUE iff p is associated with the target

tvar• Association with a pointer can be removed using

nullify(p)• which disassociates p with any target.

Pointers - serious safety hazard• Conventional variables have many nice features:

– unique association of memory with variables– distinct variables - distinct locations– one without the other not possible

• Pointers provides flexibility and more control• But at the cost of safety• It is a low-level feature• No unique association of pointers to targets• More than one pointer to the same target or location• Pointer without location (dangling pointers)!• Location without any pointers too (memory leak or

garbage)!

Multiple Associationsp1 => x

p2 => p1

p3 => p2

p4 => x• All point to the same location

p1

p2

p3

p4

x

Dangling Pointers• What is the problem with multiple associations?• value pointed to by p1 can be changed independently

p1 = 10p2 = 17p1 = p1 + 1

p1 points to a location which contains 18 and not 11• More serious problem:

p1 = 10deallocate(p2)p1 = p1 + 2

• p1 is pointing to a location which is deallocated• p1 is a dangling pointer• no control over what value the deallocated memory will

contain

Memory Leak• Only way of accessing dynamically allocated

memory is via pointers• Suppose there is only one pointer p pointing a

location• nullify(p) disassociates p• The memory is no longer accessible• Memory has leaked out - memory has

become garbage• Deallocation done before memory leaks out• Wastage of space• Separate Garbage collection phase