owners manualthe plug should still fail to fit, contact you electrician to replace your obsolete...
Post on 15-Jan-2020
2 Views
Preview:
TRANSCRIPT
) - ! • "
OWNERS
MANUAL
MODEL NO.934.44817390
TABLE OF CONTENTSIMPORTANT SAFEGUARDS ............ 2
PRECAUTIONS ...................... 4
SUPPLIED ACCESSORIES ............. 4
FEATURES .......................... 5
OPERATING CONTROLS AND FUNCTIONS 6
REMOTE CONTROL OPERATION ....... 8
ANTENNA CONNECTIONS ............ 10
PREPARATION FOR USE ............. 12
OPERATION ........................ 18
T.V. OPERATION ................. 18
VIEWING AND RECORDING THE SAMEPROGRAM ...................... 19
AUTOMATIC TIMER RECORDING .... 21
QUICK SET PROGRAM ............ 24
CHECKING THE COUNTER, CLOCK ANDCHANNEL NUMBER ............... 26
OTR (ONE TOUCH RECORDING) .... 27SETTING THE SLEEP TIMER ........ 28
PLAYBACK ...................... 28
RENTAL PLAY .................... 28
AUTO REPEAT PLAYBACK ......... 29
CLOSED CAPTION SYSTEM ........ 29
TROUBLESHOOTING GUIDE .......... 32
MAINTENANCE ..................... 33
SPECIFICATIONS ................... 34
13"COLORTVCR
COMBINATION
Record the Model Number and Serial Num-
ber of your TVCR combination.
The Model Number and the Serial number
are on the rear panel.
Model No.
Serial No.
Keep these numbers for future use.
IWARNING:TOREDUCETHERISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK)NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSON-NEL.
The Important note Is located on the rear of the cabinet.
THIS SYMBOL INDICATES THAT DAN-GEROUS VOLTAGE CONSTITUTING ARISK OF ELECTRIC SHOCK IS PRES-ENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THATTHERE ARE IMPORTANT OPERATINGAND MAINTENANCE INSTRUCTIONSIN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
IMPORTANT SAFEGUARDS
1. Read instructions-All the safety and operating instructionsshould be read before the appliance is operated.
2. Retain Instructions-The safety and operating instructionsshould be retained for future reference.
3. Heed Warnings-AU warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructionsshould be followed.
5. Cleaning-Unplug TV from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.EXCEPTION : A product that is meant for uninterruptedservice and that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user forcleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning descriptionotherwise required in item 5.
6. Attachments-Do not use attachments not recommended by
the TV manufacturer as they may cause hazards.7. Water and Moisture-Do not use this TV near water-for
example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,and the like.
8. Accessories-Do not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, causing
serious injury to someone, and serious damage to theappliance. Use only with a cart,
stand, tripod, bracket, or tablerecommended by the manufac-
turer, or sold with the TV. Anymounting of the appliance shouldfollow the manufacturer's instruc-
tions and should use a mounting
accessory recommended by themanufacturer. An appliance andcart combination should be
PORTABLE CART WARNING
S3126A
moved with care. Quick stops, excessive force, and unevensurfaces may cause the appliance and cart combination tooverturn.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliableoperation of the TV and to protect it from overheating,
these openings must not be blocked or covered. The
openings should never be blocked by placing the TV on a
bed, sofa, rug, or other similar surface. This TV shouldnever be placed near or over a radiator or heat register.
This TV should not be placed in a built-in installation suchas a bookcase or rack unless proper ventilation is providedor the manufacturer's instructions have been adhered to.
10. Power Sources-This TV should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home,
consult your appliance dealer or local power company. ForTVs intended to operate from battery power, or other
sources, refer to the operating instructions.
1 1. Grounding or Polarization-This TV is equipped with a po-
larized alternating-current line plug(a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable toinsert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the safetypurpose of the polarized plug.
12. Power-Cord Protection-Power-supply cords should berouted so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, andthe point where they exit from the appliance.
13. Outdoor Antenna grounding-If an outside antenna or cablesystem is connected to the TV, be sure the antenna or cable
system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section
810 ot the NationalElectricalCode,ANSI/NFPANo.70-
- 2 - EN
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ELECTRICSERVICEEQUIPMENT
NEC - NATIONAL ELECTRICAL CODE
$2898A
1984, provides information with respect to proper ground-
ing of the mast and supporting structure, grounding of thelead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection
to grounding electrodes, and requirements for the ground-
ing electrode. (Fig. A)
14. Lightning-For added protection for this TV receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet anddisconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or otherelectric light of power circuits, or where it can fall into such
power lines or circuits. When installing an outside antennasystem, extreme care should be taken to keep from touch-
ing such power lines or circuits as contact with them mightbe fatal.
16. Overloading-Do not overload wall outlets and extensioncords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into
this TV through opening as they may touch dangerousvoltage points or shortout parts that could result in a fire or
electric shock. Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualifiedservice personnel.
19. Damage Requiring Service-Unplug this TV from the walloutlet and refer servicing to qualified service personnel
under the following conditions:
ANTENNALEAD INWIRE
• ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the oper-
ating instructions. Adjust only those controls that are cov-
ered by the operating instructions as improper adjustmentof other controls may result in damage and will often require
extensive work by a qualified technician to restore the TVto its normal operation.
e. If the TV has been dropped or the cabinet has been
damaged.
f. When the TV exhibits a distinct change inperformance-thisindicates a need for service.
20. Replacement Parts-When replacement parts are required,be sure the service technician has used replacement parts
specified by the manufacturer that have the same charac-
teristics as the original part. Unauthorized substitutionsmay result in fire, electric shock, injury to persons or otherhazards.
21. Safety Check-Upon completion of any service or repairs tothis TV, ask the service technician to perform routine safety
checks to determine that the TV is in proper operatingcondition.
-3- EN
PRECAUTIONS
For safe operation and satisfactory performance ofyour unit, keep the following in mind when select-ing a place for its installation:
• Shield it from direct sunlight and keep it awayfrom sources of intense heat.
• Avoid dusty or humid places.• Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ven-tilation holes at the top and bottom of the unit.Do not place the unit on a carpet because thiswill block the ventilation holes.
• Install unit in a horizontal position.• Avoid locations subject to strong vibration.• Do not place the unit near strong magnetic
fields.
• Do not move the unit from a cold to a hot placeor vice versa.
• Do not handle the power cord with wet hands.• Do not pull out the power cord when discon-
necting it from an AC wall outlet. Grasp it bythe plug.
• If, by accident, water is spilled on your unit,unplug the power cord immediately and takethe unit to an authorized video service center
for servicing.• Do not put your fingers or objects into the VCR
cassette holder.
• Do not place anything directly on top of theunit.
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warmplace, or after heating a cold room or under con-
ditions of high humidity. If playing a tape with aTVCR which has moisture, it will damage the tapeand TVCR. Therefore when the condensation oc-
curs inside the unit turn the POWER button on
and allow at least 2 hours for the unit to dry out.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or othercopyrighted material may violate applicable copyright laws. We assume no responsibility for theunauthorized duplication, use or other acts which infringe upon the rights of copyright owners.
SUPPLIED ACCESSORIES
Remote Control Unit(UREMT 32MM 001)
With 2 AA Batteries Rod Antenna
(OEMN00454)
-4-
FEATURES
Auto Power On and Off system- Automati-cally turns the TVCR on as you insert the cas-sette, and turns off after auto-rewind, ejectswhen reaches beginning of the tape.
Three Different Record/Playback Speed- Se-lect the SP mode (Standard play), LP mode(Long play) and SLP mode (Super long play)for up to eight hours of recording/playbackwith a T-160 tape.
On-Screen-Display- All major operating andprogramming functions appear on your TVscreen for operating convenience.
On Screen Selectable language for English orSpanish
Automatic Playback Speed Selection- Auto-matically selects the proper playback speedeven if you set speed select to different mode.
1 Year, 8 Events Timer (including daily and
weekly)- The built-in timer allows you to re-cord up to 7 programs at different times ondifferent channels up to 1 year in advance. TheQuick Set Program feature uses program num-ber 8. Also a daily timer will allow recordingsto be made of daily broadcasts and the weeklytimer will allow recording to be made once aweek up to the end of the tape.
• Quick Set Program- The Quick Set Programallows you to easily record one program within24 hours.
• Picture Search- You may view the video pro-gram at a high speed in either a forward orreverse direction.
• STILL- "Freeze" the picture at any time, forclose viewing of a particular scene.
PLL Frequency Synthesizer Tuner with 181Channel Cable-compatible with Direct sta-tion Call- (A CATV Box may be necessary toview pay CATV channels.)
t 31 Buttons Infrared Remote control- Allows
you to use most of control from a remote loca-tion.
• Rental Play Mode- Improves playback picturequality of worn tapes, especially rental tapes.
• Auto Repeat Play back- Let you set the TVCRto automatically repeat a tape when it reachesthe end.
CCS (Closed Caption System)- You maywatch dramas, movies and news etc. with cap-tioning the dialogues and the contents of newsif you want.
-5-
OPERATING CONTROLS AND FUNCTIONS
-- FRONT VIEW --
6
U, ,J
I 2 3 4 B 7 8 B 10 11 12 13
,--q
-J j
I
14
-- REAR VIEW --
/------
5 16 17
I
-6-
1 Remote Sensor- Receives the infrared control
signals from the handheld remote control unit.2 RECORD indicator- Lights when in the Re-
cording mode.3 TIMER REC. indicator- Lights when in the
Timer Recording mode.4 POWER button- To turn TVCR on and off.
Press to activate the automatic recording timer.5 STOP/EJECT button- Press to stop tape mo-
tion. Press to remove tape from TVCR.6 CASSETTE COMPARTMENT
7 REW button- Press to rewind tape, or to viewvideo in reverse during play mode at a faster
than normal speed. Press PLAY button to re-turn TVCR to normal playback speed.
8 PLAY button- Press to begin playback of a
tape.9 F.FWD button- Press to advance tape, or to
view video in forward direction during play
mode at a faster than normal speed. PressPLAY button to return TVCR to normal play-back speed.
10 REC/OTR button- Press to begin manual re-cording. Press to activa te One Touch Recordingmode.
11 VOLUME buttons- To adjust the volume level.12 CHANNEL buttons- Press to select the chan-
nel for viewing or recording.TRACKING buttons- Adjust to minimizevideo 'noise' (lines or dots on screen) during
playback.13 MONITOR button- Press to turn the TV screen
on and off when in the recording mode.TODAY TIMER REC button- Press to set
Today Timer Recording.14 PHONES jack- To connect earphones (not
supplied) for personal listening.15 ANT. terminal- Connect an antenna or CATV.
16 AUDIO IN jack- Connect to audio output jack
of your audio equipment or another VCR.17 VIDEO IN jack- Connect to video output jack
of your video camera or another VCR.
-7-
REMOTE CONTROL OPERATION
You can operate most of functions from the Re-mote Control (included). The buttons on the Re-mote Control have the same functions as the
corresponding buttons on the unit.
IIoI? Ih[o]tlI,.'t I ] IoIiI [o,IolIl[i Io]H
1 POWER button- To activate the automatic
timer recording and turn TVCR on and off.2 NUMBER buttons- To select desired channels.
To select channels 1 to 9, first press the 0 button
and then press desired channel button 1 to 9.+100 button- To select channels which are
equal or greater than number 100.3 STOP button- To stop tape motion.4 PLAY button- To playback the tape.5 REW button- To rewind the tape. To view the
picture rapidly in reverse, in the playbackmode. (Rewind Search)
6 F.FWD button- To move the tape forward rap-idly. To view the picture rapidly in forward in
the playback mode. (Forward Search)7 REC button- Press to begin manual recording.8 PAUSE/STILL button- To stop the tape tem-
porarily during playback or recording.9 MENUbutton- Press to display main menu on
the TV screen. (This function is operative onlywhen the main menu is displayed on TV screenin the stop mode.)
10 SELECT button- Press to select setting modes
(clock, counter, tape speed, program, CH pre-set) in the main menu. (This function is opera-tive only when the main menu is displayed onTV screen in the stop mode.)Status function- Press to display the counter orthe current channel number and current time
on the TV screen.
11 ADD/DELETE button- Press to cancel memo-
rized channel or Timer Program, and to adddesired channel. (This function is operativeonly when the main menu is displayed on TVscreen in the stop mode.) (See page 17, 18)COUNTER RESET button-To reset counter to0000.
12 COUNTER MEMORY button- To set counter
memory on and off. (See page 21)13 SPEED button- To set desired recording
speed. (SP/LP/SLP)14 MONITOR button- Press to turn the TV screen
on and off when in the recording mode.15 MUTE button- To mute sound. Press again to
resume sound.
16 VOLUME buttons-- To adjust desired volumelevel by pressing either "A" or '_" button.
17 CH. buttons- To select desired channel by
pressing either "A" or "V" button. They cannotbe used during Timer Recording.They may also be used to adjust the picturecontrol. (See page 19)SET button- Adjust time with "A" or "V" but-ton in the menu mode.
(This function is operative only when the mainmenu is displayed on TV screen in the stopmode.)
TRACKING buttons- Adjust to minimizevideo 'noise' (lines or dots on screen) during
playback. (See page 32)18 EJECT button- Press to remove tape from
TVCR.
19 SLEEP button- To activate the sleep function.
(See page 29)
-8-
5 6 7 8
MENU SELECT AOOPOELETE
19
--2
18
17
--15
141312
11
Slide the battery compartment cover by pressingthe cover on the remote unit in the direction of thearrow.
HInsert 2 "AA" penlight batteries into the batterycompartment in the direction as indicated by thepolarity (+/-) markings.
Replace the cover.
I
-9-
ANTENNA CONNECTIONS
The UHF/VHF Rod Antenna(supplied) is detachable. Push the stem of the antenna into the hole whichis located on the upper back cabinet of the unit.Connect the Rod antenna or VHF/UHF Combination Antenna to ANT.IN terminal of TV as shown in
drawing.For the best reception, extend the rod antenna and adjust its length and position. (Avoid handling thetop section when making adjustments).
UHFNHF
Rod Antenna
(accessory)
VHF/UHF
Combination Antenna
OR
Note :
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent,straighten the pin as illustrated, then plug the pin into antenna terminal.
Bent pin
(Needs to be straightened) (Straight pin)
__ %_'.' := ==_'_mmlmllllmmm
In some areas it will be necessary to use an outdoor antenna.
_VHF/UHF Combiner_
U_ut_upplrdul< I
VHFAntennaUHFAntenna
-10-
Use this connection if your cable system connectsdirectly to your TVCR without a converter box.With this connection you 1) can use your TVCRRemote Control to select channels 2) program oneor more unscrambled channels for unattended
recording.
From Cable System
75-ohmCoaxial Cable
(Not supplied)
ANT_ r
I:flq i :l 1|_El I ll_Ujl [_o] p]_
When using an external input signal, connect theaudio/video cable to the AUDIO IN, VIDEO IN
jacks.Note: Disconnect all cables from the AUDIO IN
and VIDEO IN jacks to record TV programs.
If your cable service supplies you with a converterbox you can use the basic connection shown here.
f (Not supplied) From Cable System
--_T__._?6IN)/ CATVBox (Notsgpplied,
II ,.°,.u°.,°°,/ I
With this connection you can record and view anychannel including scrambled channels. Howeverchannel selection must be made at the cable com-
pany converter box. This means that channelscannot be changed using the TVCR Remote Con-
trol. Unattended recording is limited to one chan-nel at a time.
TO RECORD AND VIEW A SCRAMBLED/UN-SCRAMBLED CHANNEL
1. Set the TVCR channel selector to the outputchannel of the Cable Converter Box. (Ex. CH3)
2. Select the channel to be recorded or viewed onthe Cable Converter Box.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the point of cable entry as practical.
-11 -
PREPARATION FOR USE
You may select the display on the TV screen to beeither English or Spanish.
Plug the VCR power co;d into a standard ACoutlet. The .....-.-- flashes. Turn on the VCR and theTV.
POWER
Press MENU button on the remote control.
- LANOUAG_ E_LE CT -
_ ENGLIS_I
Eg,PAf,IOL
gSelect 1(ENGLISH) or 2(ESPAlqIOL=SPANISH)
with number button or CH./SET "A "or "v" but-ton.
r_r'_ r-h c_ r-hr-h r-h r-h r-h
1 ENOI_
2 E_PAI_'OL
Press MENU button t
MENU
) return to normal mode.
TO CHANGE THE LANGUAGE
If you want change the language of the display,follow steps below.
Press MENU button on the remote control.
-_NU-
_ I TIMERPRO(_t_M_INGMENU *_SETu_
3 _TF_G GLCGK4 CHhNN_L _T U_s L_NGUAGE SELECTI CLOE_D CAPTION_k_TUP7 REPEAT PLAY IOFF]8 RENTAL IOFr_
Select item 5(LANGUAGE SELECT) with numberbutton or CH./SET "A" or "v" button.
r-1
Ocbcbcbd:3cb 0 cb
I TIMER PROGRAM_ NG2 TVSET UP: _ETTING GL@GK4 GH/LM_L _T UP
_5 LANGUAGE ELECT$ GLO_-O CAPTK_ S_T UP7 REPEAT PLAY
mPress SELECT button.
MENU
- LANOUAO_E_LECT -
1 ENGLISH
2 E_P.'_OL
nSelect I(ENGLISH) or 2(ESPAIKIOL=SPANISH)with number button or CH./SET "A "or "v" but-ton.
- L_I_UAO_ 8ELEGT -
1 ENGLISH
ESPAf_OL
imPress MENU button to return to normal mode.
MENU
- 12 -
I,,'ti lil +Jill i I 1:114IoI4 _,li[el ;lole] ;t1t:[11/II hV+I:ll
Set the clock accurately for proper automatic timerrecording.Note: The instructions refer to the TV's on-screen
display indicators. Some of the indications on theTVCR's display vary slightly.In the example below, the clock is to be set to:
DATE March 1st, 1993SETTING TIME 5:40PM.
# You must use the remote control unit for the
following steps.
Press MENU button.
The main menu display appears on the TV screen.
MENU
-IdENU -
_111MER PflOORAIIINGTVSET UP
_ IETIiIG CLOCK4 CHAIIIEL IiET IJP
LANGUAGE!_I_CT_ C,I_O_O C _qPTI_N .S_'TUP
Select item 3 (SETTING CLOCK) with numberbutton or the CH./SET "A" or "V" button.
r%c_ r-h cb r_r-_ r-h r-%r_
- kEt#J -
1 TIMERPROORAkI,,_NOI TVS[T UP| ElrTliG CROCKi CHN/N_L _IET UPs LA_^QE _LEC_I CLO_I: I) C_P TION _T LiP
$ RENTAL
Press SELECT button.
"SETTING CLOCK" appears on the TV screen. The
MONTH digits flash.
SELECT
Enter the desired month with number button or
the CH./SET "A" or "v" button. (Example: 03)• After I second the DAY digits flash.
cbr'
-filING fLOCK -
_tlt DAY '_E _t
"Tqq'.......
nEnter the desired day with number button or theCH./SET ,,A- or "v" button. (Example: 01 )
• After I second the YEAR digits flash.
o,,',_::,°_"_',i.......
Enter the desired year with number button or theCH./SET "_" or '_" button. (Example: 1993)• After 1 second the HOUR digits flash.
r_
r_r-_r:br_
cbo
- I_TI'ING CL(_IK -
Enter the desired hour with number button or the
CH./SET "_" or '_" button. (Example: 05)• After 1 second the MINUTE digits flash.
r"n- BETnNG GLO_K -
MONI_rl DAY !#1EAR
o_ i ol le93
+_;'14!.....
-13-
Enter the desired minute with number button orit_ttthe CH./SET or "v" button. (Example: 40)
• After I second the AM/PM digits flash.
r_r_r_r-h_r-h t-h r'h r'h
- _I"TI_ CLOCK-
MONTH GAY YEk'R
O3 I 01 1|J3
Select AM(l), PM(2) with number button or the
CH./SET "A" or "v" button. (Example: 2_PM)
TO CHANGE CLOCK SETTING
If you want to change the clock,1) Follow step [2] to [7], page 12.2) Select desired digit with SELECT button or
ADD/DELETE button.3) Enter correct numbers with number button or
CH./SET ",a," or '"v" button.
4) Press MENU or SELECT button to originalmode.
,-_ r-h ¢b r-hc:b r'h cb r'h
- aE_ C4.OCK-
MONTHDAY _R
J O1 lgJ3
imlPress MENU or SELECT button to start the clock.
Although seconds are not displayed, they begincounting at 00 when you press MENU or SELECTbutton. Use this feature to set the clock as accu-
rately as possible.
MENU
C3
SELECT
S:40PM
Notes:
• If the display shows an abnormal reading or noreading, unplug the power cord for a few sec-onds. Then plug it back in.
• This unit has a built in calendar up to the year2007.
- 14-
This TVCR will operate with any cassette that hasthe VHS mark. For best results we recommend the
use of high-quality tape.• Do not use poor quality or damaged tape.The table below shows the recording/playbacktime using T-60, T-120 or T-160 tape in the SP, LPor SLP mode.
MODE CASSETTE
T-120
2 hours
1--60 T-160
SP Mode 1 hour 2-2/3hours
LP Mode 2 hours 4 hours 5-1/3hours
SLP Mode 3 hours 6 hours 8 hours
When handling video tapes, take the following
precautions• Avoid moisture, which can condense on the
tape if it is moved from a cold place to a warmplace. Playing a tape that has moisture in it willdamage the tape and your TVCR. Before usinga tape with these conditions, wait until the tapehas warmed to room temperature and themoisture has evaporated.
• Avoid extreme heat, high humidity and mag-netic fields.
• Do not tamper with the cassette mechanism.• Do not touch the tape with your fingers.
ERASE PREVENTION
You may prevent accidental erasing of a tape bybreaking off the tab on the back edge of the cas-
sette. If you decide to record on the tape again,cover the hole with plastic tape.
Insert the cassette into the TVCR as shown.
t
ECORRECT WRONG
Store the cassette in its case as shown.
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push
in gently, but continuously, on the center-back of
the cassette until it is drawn completely into theTVCR.
TVCR is automatically turned on when the cas-
sette is properly inserted.
REMOVING A CASSETTE
Press EJECT button on the main unit or on theremote control unit.
STOP/EJECT
I ]
EJECT
When the cassette stops moving, pull the cassette
out of the cassette compartment and store it prop-erly.
- 15-
[__4iillIt] , -
This TVCR is equipped with a frequency syn-thesizer tuner capable of receiving 181 channels(VHF channels 2 ~ 13, UHF channels 14 ~ 69 andCATV channels 1 - 125).
You can program the tuner to scan only the chan-nels you receive in your area.• Programmed channels are erased when you
disconnect the p ower cord or if a power failureoccurs.
AUTOMATIC CHANNEL MEMORY
• You must use the remote control unit for the
following steps.
Press POWER button to turn on the unit.
ElPress MENU button.
The main menu display appears on the TV screen.
MENU
-MEMJ -
_I TIMER_NGTVIgETLm
3 8_ I'fe,K3 CLOCK4 C_ANNi'L _T UPS LANC_A(]E _[-LECTli CL/.36[ O CPTION _T UP
Select item 4 (CHANNEL SET UP) with numberbutton or the CH./SET "A" or "Y" button.
r-hr r'hc
- MENU -
TIMER PRO(_/_e,M NG2 TV._ETUP3 _TrlNG CLO_3K
_4 CHJq._ L _1 UPSLANGU,_3E8ELEC;T| CLOSED CPTION SET UP
Press SELECT button.
- CH/_NIE L SIT UP -
_1 TV
2 CATV
3 _DD/OELIETE GH
I:-!Select I (TV) or 2 (CATV) with number button or
CH "A" or "v" button (Example: TV)
r-h cb r-_ r-_c_cb_
- CHANNEL_.T U_ -
_1 TV
CATV
3 /VDO/I)ELETECH
IllPress SELECT button. The tuner scans and mem-
)rizes all the active channels in your area.TV: from CH2 / CATV: from CH1)
SELECT
After scanning, the tuner stops on the lowestmemorized channel. (Example: CH2)
CH2
- 16-
To add or delete the desired channels. Follow steps
[1] to [4] on page 16, then step [5] below.
Select item 3 (ADD/DELETE CH) with numberbutton or CH./SET "A" or "V" button.
€5c_ r'h cb c_c_c_ r-h rh
1 TV
2 CATV
3 /,DD_)ELI.TEGH
Press SELECT button.
SELECT
FOLLOW STEPS [7a~8a] OR [7b~8b] TO ADDOR DELETE THE CHANNEL. THEN GO TO
SETP [9].
IPress MENU button. The TV screen returns to TVmode.
MENU
DELETING PRESET CHANNEL
Enter the desired channel number using the num-ber button or the CH./SET "A" or "Y" button.
÷1®
o
Press ADD/DELETE button. The channel number
changes to light red. The channel is deleted.
ADD/DELETE
RESET
L--COUNTER
ADO/OELETE GH
II (l_
Notes:
• To delete another channel, repeat step [6] to [7].• If you press ADD/DELETE button again, the
channel is memorized again.
ADDING PRESET CHANNEL
Select the desired channel number using the num-ber buttons.
d5c_ r:_ cb r%
Note: To confirm that channel(s) has been deleted,
press CH./SET ",A"or "V" button.Press ADD/DELETE button. The channel number
changed to light blue. The channel is added to theTVCR.
Notes:
• To add another channel, repeat step [6] to [71.• If you press ADD/DELETE button the again,
the channel is deleted again.
NOTE"Added channel is in light blueDeleted channel is in light red
-17
\DD/DELETE
RESETL-COUNTER
OPERATION
ij_Ko]_ _Y,._lti[o]_
Press POWER button to turn on the unit.
POWER
CT • 5:40PM
CH_
C,O4.1NT 0O00
IellSelect the desired channel with number button or
CH./SET "A" or "y" button.
r--1
Ocbcbct_cbc_oo
CH 6
Adjust the VOLUME to desired listening levelusing the VOLUME "k"or "V" button.
A
v
)}
)JV(_UOAE
I-] Illlnl,,,, Id
• You must use the remote control unit for the
following steps.
Adjust picture controls for a natural lookingimage. Press MENU button. Select item 2 (TV SETUP) with number button or CH./SET "A" or "V"button.
.iw
I---'1
ocbcbcb000c_:3
I - 14_I_K.I-
_ 11MERPtqOGR,_4k_NQI"V_T UP
41SETTING (;L(X;KCH,ANNELS_T UP
t lANOUA(TE 9ELECTCLOeeD C.,_PTION SETUP7 REFEAT PLAY8 RENTAL _
Press SELECT button. Select item 1 (PICTURECONTROL) with number button or CH./SET "&"or "V" button.
SELECT
I -'rVSETUP •
-- 1 PICTURE GONTRO[
E'EOFT MEW [OFF)
3 TV REE_T
Press SELECT button repeatedly until desiredcontrol is displayed.
Each time you press SELECT button CON-TRAST, BRIGHT, COLOR, TINT and
SHARPNESS appear on the screen in order.(Example : CONTRAST)
{-)_l*l
Adjust picture control with CH./SET "•" or "V"button.
• Your TVCR's picture controls -- CONTRAST,BRIGHT, COLOR, TINT and SHARPNESS
-- are preset to the center position. This is usu-ally best, but if you need to make any further
adjustments, use the following chart as a guide.
CH.ISET • CH./SET •
CONTRAST todecrease to increasecontrast contrast
BRIGHT todecrease to increasebrightness brightness
COLOR to pale to brilliant
TINT to green to purple
SHARPNESS to soft tOclear
TO PRESET THE PICTURE CONTROLS TO
THE CENTER POSITION, SELECT ITEM 3 (TVRESET) AT STEP [5].
- 18 -
YoucanonlywatchthesameTVprogramthatisbeingrecorded.
Inserta cassette with erase-prevention tab intact.The unit turns on automatically.
STOP
ImEnsure TIMER REC indicator is off. When TIMER
REC indicator lights on, press POWER button toturn on.
POWER TIMER REC
©
Press SPEED button on the remote control repeat-edly until the desired recording speed is dis-played. (Example :SP)
SPEED
$P
nSelect the program to be recording with pressingthe number button or the CH./SET "," or "T"button.
I CH 32l
Press REC button.
REC
REC
sp
To skip some material while you are recording;
Press PAUSE/STILL button on the remote control.
PAUSE/
STILL
C27 PAUSE
liBEl
[ sP
Note: If the TVCR is left in the Pause/Still mode
more than 5 minutes during REC mode, It will
automatically switch to the recording mode.When in the Pause/Still mode, a display showing5 I" marks will appear on the screen. Each I"mark represents one minute of Pause time. Youmay refer to this display for remaining pause timeavailable.
Press PAUSE/STILL button on the remote control
again to resume recording.
PAUSE/
STILL
'REC
SP
aPress STOP button when recording is completed.
STOP
ISTOP 1
-19-
COUNTER MEMORY
The Memory can be used in the REWIND orF.FWD mode, to stop tape as tape approachescounter display of approx. 0000.
Fast Forwards Auto-Stop Rewinds Tape End
Counter Point
For example, this feature can be used to return thetape to a pre-selected position immediately afterrecording, or to repeatedly playback a certain por-tion of a tape.• You must use the remote control unit for the
following steps.
Before playback or recording, press SELECT but-
ton repeatedly until the counter number is dis-played.
SELECT
8TOP
SP COUNT 1234
IBIPress COUNTER RESET button. The counter reset
to 0000.
ADO/DELETE
RESETL-COUNTER STOP
SP COUNT 0000
Press COUNTER MEMORY button.
MEMORY
COUNTER --j STOP
8P MEMORy 0000
Press SELECT button repeatedly until the TVscreen returns to 'IV mode.
SELECT
HPress REC or PLAY button.
REC PLAY
Press STOP button when recording or playback is
completed.
STOP
STOP
mPress SELECT button so that counter mode ap-
pears.
SELECT
I STOP
MEMOAY 1234
nPress REW button.
The tape will stop automatically when the counterreaches to approx. 0000.
REW
STOP MEM_ Y 0000
- 20 -
Automatic timer recording lets you set the TVCRto start and end a recording while you are away.Your TVCR has eight program timers. You can set
eight events to record on a specific day, daily orweekly within 1 year period. You can set eachprogram to record on a different channel and at adifferent recording speed.
SETTING THE TIMER PROGRAMS
Be sure the clock is set to the correct time before
you use automatic timer recording.
In the example below, the timer is being set torecord:
DATE MAY 6th Thursday, 1993SETTING TIME from 7:30AM to 8:50AMCHANNEL CH.61TAPE SPEED LP
• You must use the remote control unit for the
following steps.
gInsert a cassette tape with erase-prevention tabintact. The unit turns on automatically.
• If necessary, rewind or fast forward the tape tothe point you want to start recording.
Press MENU button.
The main menu display on the TV screen.
MENU
I - I_Ee#J-
--I TII_,ER_it TV 8ET UPJ gETTING CLOCK4 G_L _T Lk_6 L_NNQLI/U3E _IELECTO CL(:I_O GAPTIO_ SET UP
8 RENTN. F
Select item 1 (TIMER PROGRAMMING) withnumber button or CH./SET "&" or "y" button.
cb cbcbr'h c:bcb r'h
- _NU-
.I TIMER _AMMING2 TI/_T UP3 aETIINO GLOCK4 CHAINNEL _T IJP
5 LANGUAGE _9_t ECTe C,I__D CAPTIONS[T UP
8 RENTN,_
Press SELECT button. Programming mode dis-;)lays on the TV screen.
SELECT
_PR_ 12=45178
DATE
8TART TIME
ENOTI_
CHANNEL
T_PE E,F'EIEO
mSelect your desired program number with number
button or CH./SET "A" or "v" button. (Example:4).
The program number 8 is used for setting QuickSet Program only. You cannot select number 8 inthe procedure of Automatic Timer Recording.
r-'l
cbcbcbcbc:br- r-hr-h
l,dl_"4 +m.,.,
+*" (I %OATE
S1"/dtl"TII_
ENO TI_
CHANNEL
T_e'E 8PEEO
mPress SELECT button. The MONTH digits flash.
SELECT
I PRO6_qM IiAAV61_R4l
_DA_
_io TIMt_
C_ANN_L
TAPE_ED
- 21 -
Enter your desircKl MONTH with number buttonor CH./SET ",a," or "v" button. (Example:05).
Oeaear -_,,--ht:b ea r-h
PP,O3Pa_ NtRaO_R 4
-DATE.::>i_;.,,,et _.
irl'_mr TIME
END TII,E
l_ _EED
• After I second the day digits flash.
gEnter your desired DAY with number button orCH./SET ,'A" or "v" button. (Example:06)
The day of the week changes automatically.
1223
r'_ r'h r'h r_r'_eaear-_
l 8TN_T TW,E
ENDTIM[
_L
TAPESPEED
• After I second the start time hour digits flash.
IWEnter your desired HOUR with number button orCH./SET ",L" or "v" button. (Example:W)
e5r=, ¢_ cb r-_,
I P_O_Ra_ _R 4
DATE 05101 TItU
END _ME
TAPE8F'EEO
imlSelect AM(l) or PM(2) with number button or
CH./SET A or button. (Example: 1-*AM)
e:_ r-_ r-_ r_,
_R 4
DATE 0S/_
END TIME
_L
TAPI_ 8PE:EO
After I second the end time hour digits flash.
Repeat steps [9]-[11] to set the end time.(Example: 08:50AM)
÷,m
C21
I F'T3(X)_ NUMOER *,
DATE 051D_ TH_
8TART TIME 07DO
-eN0'n.e 0e:,,,?_i:=.
CHANNEL " 1%T_kPESPEEO
• After 1 second the channel digits flash.
Enter your desired CHANNEL with number but-ton or CH./SET ,,A- or "v" button. (Example: 61)
Or-h c:_r-h
• After I second thestart time minutedigitsflash.
Enter your desired MINUTE with number buttonor CH./SET "_" or "v" button. (Example:30)
r_c_ r-h c_ r'_
END TWE
_t
"I'#JP_.,_/'£ _ O
• After 1 second the AM/PM indicator flashes.
I _ NUMOER 4
OA1]E O5 106 TItU
ENOlIME 08:1_ AIa
_¢a,,_t .--.Jl.,;...
• After 1 second the tape speed digits flash.
Select your desired recording speed SP(1), LP(2)or SLP(3) with number button or CH./SET "_" or
"v" button. (Example: 2_LP)
r-_
O00oDATE 05106 THU
IrltNTr TI_ 07:am AM
EN0 TPM_ DS._)0 AM
C_L I;1
- 22 -
Press MENU or SELECT button on the remote
control unit. Program 4 is now completed.To set another program, repeat steps [2] to [15].
Mf_qJ
8ELECT
r _
Iii
mPress POWER button on the TVCR or on the re-mote control unit.
POWER TIMER REC
©
Note: When the programs overlap, the earlier pro-
gram has priority.If you programmed as per as the above illustrationthe timer recording would be carried out as fol-lows:
I PROGRAM I l"l ' i_tl_ri_i_i_i!_i_i_!i_i_HIM_,I.... ,
I I '_i'i_U_'_iJ' ii
I I I I PROG RAM 3 ,'i'm'''''_''l
9:00AM 10:00AM 11:00AM 12:00PM
9:00AM - 11:00AM for PROGRAM 2
ll:00AM - 12:00PM for PROGRAM 112:00PM - for PROGRAM 3
DAILY PROGRAM
To record a program at the same time on the samechannel every day, follow steps [1] to [6] on page22 then continue with step [7a] below.
Press CH./SET ",a," or"v" repeatedly or enter "00"with number button. "DAILY" appears on the TVscreen.
r_cbcb cb cbcb r'h r'h r-hcbcb
/ :'Z.'Z '' "
After I second, continue with step [9] on page 23onwards.
WEEKLY PROGRAM
To record a program at the same time on the samechannel every week, follow steps [1] to [6] on page22 then step [7b] below.
mPress CH./SET ",a," or "v" button repeatedly untilyour desired date of the week is displayed.(Example: W SUN)
v CH./SETSTARt TIM_ '_l_f'_ "'q'
ENO TiME
CH_L
TAPESPEEO
After I second, continue with step [9] on page 23onwards.
23 -
YoumaysettheTVCRtostartandendrecordingoneprogramwithin24hoursbysimplypressingMONITORbuttonontheTVCR.It iseasyforyoutorecordtoday'sTVprogram.• Powermust be on to set Quick Set Program.• Clock must be set to the correct time before
setting the timer.• Quick Set Program is memorized to program
number 8.
In the example below, the Quick Set Program isbeing set to record:
SETTING TIME from 10:00PM to 11:00PMCHANNEL CH10TAPE SPEED SP
Current time is 8:00PM.
Note: This function is not operative with theremote control.
Insert a cassette tape with its erasure preventiontab in place, if necessary, rewind or fast forwardthe tape to the point at which you want to begin
recording. Timer display will be changed to thecount mode.
Press MONITOR button on the TVCR.
MONITOR
©•I_ICK SEI _-
OArE _
_ ST_'_ 1_' 08_0Q,• PM
TI_ '_ _ _E_
NOTE:1)Key Inputs tor steps [2]~[10] Should be
done with in 2 seconds, otherwise inputmode will forward to next mode.
2)You may forward to next step when youpress VOLUME "•" button within 2second after your Inputs.
3)When you press VOLUME "v" button, allInput data will be erased and return toInitial display (step [2]).
mmPress CHANNEL "A" or "V" button until yourdesired start time hour is displayed. (Example: 10)
• CHANNEL • OATE _
_ST_ IWE_ _ 10_ I_1
ENO TIME_ !! _
TAPE_ED _.P
mPress CHANNEL "•" or "•" button until yourdesired start time minute is displayed.
(Example: 00)
_UIGK _T PROORAM-
('NO Tno_
_L 06
TAPE 8PEEO
Press CHANNEL "A" or "•" button until AM or
PM is displayed. (Example: PM)
• CHANNEL • OAT[ _ T
.8T_IT Tl_ I 0Je'_PM ",',',ENO Tmk_ " I "
TN_ 8PEEO 8LP
imPress CHANNEL "•" or "•" button until yourdesired end time hour is displayed. (Example: 11)
• CHANNEL • OAllE _/25
IST_11O_ _0:00 PM
¥_ SPEI_O 81_P
mPress CHANNEL "•" or '_'" button until yourdesired end time minute is displayed.(Example: 00)
OATE 03/25 I_
8T_RTT_4_ 10 0 P_
--_ 1111[ .I_':,_M
TAPIE_EO _
- 24 -
gPress CHANNEL "•" or "V" button until AM or
PM is displayed. (Example: PM)
.OJGK _T PROGRA_-
OAIE 0._Q5 THU
8T_TT_IdE 10_ _-E_ ,,,_ .=,_,, ....C_MNEL N "`' j %
TAPE _EO JZLP
ILlPress CHANNEL "•" or '_r" button until your de-
sired channel number is displayed. (Example: 10)
• CHANNEL •
f r-]..QUtC,K _T F'f_OCI_-
OATIE 03/'25 THU
IIT/_R'TTIMI. 1090 PM
END TIME _I_0G PM
-c,w,_,_J;,",'e';:....
mPress CHANNEL "•" or '_'" button until yourdesired tape speed is displayed. (Example: SP)
<:U_K SlETPP_ _4-
DATE IKI_ T_
JBI_,RTTIME lo:oo PU
ENO _ 11_10 PM
C.H,_'_EL 10
--,__;'_':2,.i
Press MONITOR button or MENU button on theremote control.
MoNn'oR
©
r-'-iiI
L
Press POWER button to set Quick Set Program.
The TIMER REC indicator lights up.
POWER JL /
When the programs overlap, Quick Set Programhas priority.
PROGRAM2 "I_I_I_I!I_IH
I°_ _ _°_l_ _t
g;o0 10_:00 11100 Io:oo
If you program as per the illustration the timerrecording would be carried out as follows.9:00-11:00 for PROGRAM 1
11:00-0:00 for QUICK SET PROGRAM (PRO-GRAM 8)0:00- for PROGRAM 2
TO CANCEL A QUICK SET PRO-GRAM WHILE IN PROGRESS
Press STOP/EJECT button on the TVCR. The pro-gram will be canceled and the display returns to
original mode.
CHECKING THE START/END TIME
To check the start/end time and channel number,
follow steps 1) - 5) below.
1) Press MENU button on the remote control.2) Select item 1(TIMER PROGRAMMING) with
number button or CH./SET ("+" or "-") button.3) Press SELECT button.
4) Select program number 8 with number buttonor CH./SET ("+" or "-") button. "QUICK SET
PROGRAM" appears on the TV screen.5) Press MENU button. The display returns to
original mode.
- 25 -
AUTOMATIC TIMER RECORDINGHINTS
• If there a power failure or the TVCR is un-plugged for more than a few seconds, the clock
setting and all timer settings are lost. At thistime, display will automatically return to clockset mode when you choose program set mode.
• If two timer programs overlap, the one thatstarts first has priority. When the first programends, the TVCR switches to record the remain-
der of the second program.• Make sure the channel you want to record is
properly tuned in advance.• The erase-prevention tab on the cassette must
be in place (or you must put tape over the hole).Note: A cassette without erase-prevention tabwill be ejected when in Timer Rec mode.
• It is not necessary to press REC button for timer
recording.• Recording begins automatically at the set Start
time.
• If you are recording using the Automatic TimerProgrammed, you may not operate the unitmanually, but, you may still stop the recordingby pressing STOP button on the TVCR.Note: STOP button on the remote control unitwill not function in this mode.
• If the tape runs out before the end time, theTVCR will switch to the stop mode im-mediately, and tape will be ejected.
• If a tape is not loaded or the erase-protectiontab is removed, the TIMER REC indicator
flashes and automatic timer recording cannotoccur. Press POWER button to stop the flash-ing. Then, load a tape that allows recording.
CHECKING TIMER PROGRAMS
To check a program that is to be recorded using theAutomatic Timer Program when the TVCR is inthe Timer Record mode, turn on the TVCR. PressPOWER button to exit the Timer Record mode.
Then follow instructions in steps 2 to 5 on page 22.Information which was set for program will now
appear.
To see the COUNTER, CLOCK and CHANNEL
number on the TV screen, press the SELECT but-ton on the remote control.
SELECT
Each time you press the SELECT button on theremote control, TV screen will change as follows.
OFF mode
t
COUNTER mode CLOCK mode
SP COUNT 1234 SP
- 26 -
The One Touch Record function enables you torecord a program simply by pressing OTR buttonon the TVCR.
According to the table, simply press OTR buttonas many times as needed to set the desired record-
ing length. The channel number to be recordedand recording length will be shown on the TVCRdisplay.
Insert a cassette with erase-prevention tab intact.The unit turns on automatically.
iSTOP
BSelect the program to be recorded.
• CHANNEL •CH 32
Press REC/OTR button on the TVCR.
(Example: 4 pushes for 90 minutes)
REC/OTROTR ( t :30)
8P
Recording starts if the REC/OTR button ispressed even while watching a TV program.
Push(es) DISPLAY LENGTH
1push NORMAL REC MODE
2 pushes 0:30 30 minutes
3 pushes 1:00 60 minutes
4 pushes 1:30 90 minutes
5 pushes 2:00 120 minutes
6 pushes 2:30 150 minutes
7 pushes 3:00 180 minutes
8 pushes 3:30 210 minutes
9 pushes 4:00 240 minutes
10 pushes 4:30 270 minutes
11 pushes 5:00 300 minutes
12 pushes 5:30 330 minutes
13 pushes 6:00 360 minutes
14 pushes 6:30 390 minutes
15 pushes 7:00 420 minutes
16 pushes 7:30 450 minutes
17 pushes 8:00 480 minutes
18 pushes NORMAL REC MODE
The timer on the TVCR display counts down asthe recording progresses.Notes:
• When you push OTR button, you will extendrecording time by 30 minutes at a time up to8-hours (or to the end of the tape).
• To stop the OTR operation, press STOP button.
• When OTR button is pushed 18 times the TVCRwill record continuously until the end of thetape.
• The recording length time remaining is indi-cated on the TV screen as the recording
• Recording stops when 0:00 is reached.• Please note that in the SLP (tape speed) mode
maximum recording time, assuming the tape isstarted of the beginning, is 8 hours using T-160(or 6 hours using T-120).
- 27-
The sleep timer function enables you to shut offthe power without pressing POWER button aftera desired period.• You must use the remote control unit for the
following steps.Press SLEEP button on the remote control repeat-edly until desired SLEEP time is display.
Press STOP button when playback is completed.
STOP
)1
SLEEP
The shut off time can be determined by the num-ber of times you press the button.(The sleep timer will be displayed on the screenwhen you press the SLEEP button on remote con-trol.)
SLEEP TIME DISPLAY
1 push 30 minutes 30 MINUTE
2 pushes 60 minutes 60 MINUTE
3 pushes 90 minutes 90 MINUTE
4 pushes 120 minutes 120 MINUTE
5 pushes 0 minute 0 MINUTE
[] K'Vd'Y-(_]]3
When a tape is inserted, the unit turns on automat-ically.
Note: If the erase-protection tab has been re-moved, the TVCR will start playback automati-cally.
INIIf playback does not begin automatically, pressPLAY button.
P_.AY
PLAY
This function enables you to improve the picturequality when playing back worn cassettes such asthose rented from a video shop.
Press MENU button on the remote control unit.
MENU
-MENU. IoFF ]
_1 TIMER PROGRAMMINGZTWBETL_3 _'/_lN_i GLO(_K4 GHAN__L _T UP$ LANGUAGE_LEGT6 (_O_EOCaPlIONSETUP7 FI_EAT PLAY8 RENTAL ]
Select item 8 (RENTAL) with number button orCH./SET "A" or "v" button.
._N_-
1 TIMER PROO_Gt 1V_TUP$ _TTI_K3 CLOCK4 GHANN[L _T UPSt_(_J^GE SELECT$ CLCY;t_r3_'llON SETUP7 A_At PL,*,Y IOIF]
_ P_NTN_ [OFFJ
EllPress SELECT button repeatedly to select "ON".
SELECT
-_WJ •
111MEAPROGRAMMING_ TV.._T UP$ _TT_fllG GLOCK4 CHANt_L 4_:TU_$ LANOUA_ S[LE(_Ti CLOgEOC_PIIONS_TUP
._ P_NTAL
Press MENU button.
• Once you select the rental play mode, it stays in
effect even after you turn off the TVCR.
• To exit the rental play mode, repeat steps [1] to[3]. Then, follow step [4], but select [OFF] fornormal playback.
- 28 -
_li[o_ Jfl=I;]__auin_w__Vdl--7;_o]_ -n--
This function enables you to repeat playback be-tween the beginning and end of the tape.• You must use the remote control unit for the
following steps.
Press MENU button.
The main menu displ
MENU
y on the TV screen.
• ME_ -
TV_T$ 4_ T'TINGGLO_K4 CH_L,_T UP$ _GUA_ S_U_CT
8 _NTJ_. )
IE]lSelect item 7 (REPEAT PLAY) with number but-
tons or CH./SET "A" or '_'" button.
1 _R _t4GI TV I_ETLIP| 8ETT1N(3CLOGK4_L_TUP
LkNGLIA(_ 8_LECT_ O.OeFD_I'Lp
_7 IT_AT RN _l• _NTP_L
Press SELECT button repeatedly to select ON.
SELECT
•MI_NU •
1 TIMERPI_OORA/,_ N_|I_TUP_ EIETTINGGLOCK4 CHANNEL,_i_TUP5 LANGUAGEE_LECTI CLCE_ OPT1_IEETUP
_ 7 FIEPEATPL_o I_NTAL FJ
Repeat playback will start automatically.
You may watch dramas, movies and news etc.with captioning the dialogues and the contents ofnews if you want.
Press the MENU button.
MENU -I TIMERPI_INOle'rv _ET L_3 _TTIN_ CLOCK4 CHAJNt_LSIFT5 LAN(IUA_ _ELECT
CLO_DOP_ 9ETUP
__T F_AY$ _i_ NTAL J
Select item 6 (CLOSED CAPTION SET UP) withnumber button or the CH./SET "A" or '_'" button.
r'_ r_ r_ r'h -MENU- I
1 TIMER PPK)GR _MI_ING| TV _T _.IP| _rllq_ CLO_K
S L_IOI3AGE _IECTCLO_EO ¢_ T_N_L_r UP
Press SELECT button.
SELECT
Press SELECT button to change "1 CLOSED CAP-
TION [ON]" and to appear "2 CAPTION MODE"
SELECT--1 _LO_OCAPTION IO_
_ e.,APTIONMO0_
ICI (_APTK3N)C2 CAPTH3NG_ TEX_C2 TEXT
Once you select the repeat play mode, it stays ineffect even after you turn off the TVCR.
To exit the repeat play mode, repeat steps [1] and12]. Then, follow step 13], but select [OFF] insteadof [ON] for normal play.
Note: The TVCR's display does not show if repeatplay is active or not.
- 29 -
Select item 2(CAPTION MODE) with numberbutton.
D- OLCII_C_IlONSETUP-
1 C4.Om_O G._PTION [ON]
_1 CAPTION]CI CAPTION
nPress SELECT button repeatedly to select yourdesired broadcast. "[ ]" appears beside the se-lected one.
• C4.QI_C._IX_ItETUP. 1
1 e.4_oGEoC_PI_ON I(_l
--2 CAPTION MO_
Cl CAPIlONC_ C_PTIONG1 TEXTIC:_TEXT1
Press the MENU button.The selected captionbroadcast appears on the TV screen.
MENU
AUTO REWIND-EJECT
When the end of a tape is reached during record-ing, playback, or fast-forward, the tape will auto-matically rewind to the beginning (or to the 0000counter reading if the memory function is acti-vated), eject, and the TVCR turns off.Notes:
• This function is operative when Auto Repeat isset to the off position.
• The tape will not auto-rewind during timerrecording or One Touch Recording.
• When tape is rewound to the preset memoryposition, tape will not be ejected and TVCR willnot shut off.
VISUAL SEARCH
You may view the video program at a high speedin either a forward or reverse direction. When in
the play mode, press F.FWD button to view thetape at a fast speed in the forward direction. Toview the tape at a fast speed in the reverse direc-tion, press REW button. The sound will be muted.This feature is useful in finding or skipping over
a particular section of a tape. When you wish toview the tape in normal speed, simply press PLAYbutton.
REW F.FWD
Notes:
• The picture will not be as good as in normalplayback (SP or LP) during Visual Search.
• When video searching a pre-recorded tape, itmay cause noise bars (white lines) to movevertically. Also, the picture color fluctuates onand off. This is not an indication of trouble.
• You will get best results when playing backtapes that were recorded in the SLP mode.
- 30 -
SUPER HIGH SPEED SEARCH(LP/SLP MODE)
For Visual Search in super high speed, press eitherEFWD or REW button while the unit is in the playmode. Then press again. The unit will now searchin super high speed. Press once more either F.FWDor REW button back to high speed search. For
normal playback, simply press PLAY button.Note: Tape recorded in the LP, SLP mode willdisplay a noise bar on the TV screen and thepicture may revert to Black and White. This isnormal.
STILL FRAME DURING PLAYBACK
If you press PAUSE/STILL button during play-back, the picture will "freeze" on the TV screen.Only recorded tape in SLP mode shows clear pic-ture. You may use this feature to study details of aparticular screen. Press PLAY button again to con-
tinue playback.Note: The TVCR will automatically switch to the
Stop mode, if it is left in the Pause mode for morethan five minutes.
NOISE CANCELLING
If you use the PAUSE button to freeze the pictureduring playback with tape recorded in SLP mode,
usually there will be video "noise bars" on the TVscreen. This is normal, however, this TVCR has a
special feature that allows you to reposition or
reduce the lines. Each time you pressPAUSE/STILL button the lines will change posi-tion on the "IV screen.
This enables you to see the picture in its entiretywithout distracting noise lines.If the tape was originally recorded in SP or LPmode, the still picture will, in addition to the"noise bars", be black and white.THIS IS NOT A FAULT OF THE MACHINEBUT MERELY A BY-PRODUCT OF THE TECH-NOLOGY INVOLVED IN PRODUCING A
TVCR WITH LONG-PLAY MODE.
TRACKING ADJUSTMENT
When playing pre-recorded tapes or tapes re-corded on units other than your own, noise lines(black and white streaks) may appear on the play-
back picture. If this occurs, adjust the TRACKINGcontrol by pressing CHANNEL "A" or "V" buttonuntil the streaks disappear.To set to center position, press both CHANNEL"A" and '_r" buttons at the same time. (This func-
tion is operative only by buttons on Main Unit.)
• CHANNEL •
/t JlMain unit
'v' CH./SET A
Remote control unit
DEGAUSS
Magnetism from nearby appliances might affectthe color of the TV picture. If this happens, movethis unit away from the appliance. If the color is
still not correct, disconnect power cord from ACoutlet then reconnect it after 30 minutes over.
- 31 -
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating yourunit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE andCORRECTIVE ACTION columns to remedy the problem.
SYMPTOM CORRECTIVE ACTION
No power. • Connect power cord to AC outlet.
• Press POWER button to ON.
No picture and sound. • Plug power cord into an active AC outlet.
• Check antenna connection.
• Program tuner's memory.
Sound OK; poor • Adjust direction or replace antenna.picture.
Picture OK; pooror nosound.
POSSIBLE CAUSE
Power cord is not connected.
The power is turned OFF.
TV is not plugged into an active ACoutlet.
Antenna is not connected.
No channel in memory,
Direction or condition of antenna isnot good.
Picture control is not good.
Interconnecting cable is connected toanother source.
Volume control on remote control unitor main unit is in minimum position.
MUTE button on the remote controlunit is in the ON position.
The timer program is set incorrectly.
• Adjust picture controls.
• Connect incoming antenna directly to thetelevision.
• Adjust volume control on remote controlunit or set.
Press MUTE button.
13mer recording is not • Set the timer program correctly.possible.
The power is turned ON. • Press POWER button to OFF.
Record mode cannot be The erase-prevention tab on cassette • Place a piece of household transparentengaged, is missing, tape over missing erase-prevention tab
on the tape cassette.
Picture is poor on • The TRACKING control is not set to • Adjust TRACKING control for betterplayback, best position, picture.
Noise in picture on • Video heads are dirty. • Head cleaning is necessary, consult theplayback, nearest Sears Service Center.
No operation by • No power to TVCR. • Make sure the AC cord is connected toinfrared Remote Control. an AC outlet.
• Weak battery. • Check the batteries in infrared RemoteControl.
- 32 -
MAINTENANCE
• Wipe the front panel and otherexterior surfacesof the unit with a soft cloth immersed in luke-
warm water and wrung dry.• Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals
may cause damage and discoloration to theexposed surfaces.
Should your unit become inoperative, do nottry to correct the problem by yourself. There are
no user-serviceable parts inside. Switch power
off, unplug the power cord, and take the unit to
your nearest Sears Service Center for servicing.
Picture playback may become blurred or inter-rupted while the TV program received is clear.This does not mean that the recorded programhas been erased. However, this problem maybe caused by dirt.Being accumulated on the videoheads afterlong periods of use, or usage of rental or oldtapes. In this case, head cleaning requireshighly technical attention, therefore consult thenearest Sears Service Center. Clean heads onlywhen problems occur.
SEARS SERVICE
Your Sears Video Cassette Recorder has added value when you consider that Sears has service unitsnationwide staffed with Sears trained technicians...professional technicians specifically trained on Sears
home entertainment products, having the parts, tools and equipment to insure that we meet our pledgeto you... "We Service What We Sell".
HOW TO ORDER REPAIR PARTS
Now that you have purchased your Video Cassette Recorder, should a need ever exist for repair partsto service, simply contact any Sears Service Center or Sears, Roebuck and Co store. Be sure to provideall pertinent facts when you call or visit.The Model Number will be found on the rear of cabinet. Always mention the Model Number whenrequesting service or repair parts for your Video Cassette Recorder.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
1. NAME of ITEM...Sears Video Cassette Recorder2. MODEL NUMBER3. PART DESCRIPTION
- 33 -
SPECIFICATIONS
CRT
Television systemRecording system
Tape widthTape speed
SPLPSLP
Tuner channelTV VHF Low
TV VHF HighTV UHFCATV
VHFMID bandSUPER bandHYPER band
Terminals:
Antenna input
_o]_II_ [.'_[_-'_o,_[_[o!_ii[o_"]
Video inputAudio input
: 13 inch in-line gun,90"deflection tube
:NTSC-M
: Rotary two-headhelical scan system
: 1/2 inch
: 33.40mm/sec.: 16.67mm/sec.
: ll.12mm/sec.
:#2~#6
: #7~#13: #14~#69
:5A
:A5-A1, A~]:J~W: W+1~W+84
VHF/UHF 75 ohmsunbalancedRCA connectorRCA connector
Video input levelAudio input level
Video S/N ratioAudio S/N ratio
: 0.5-2.0Vp-p: -15dBs: More than 46dB: More than 43dB
Power requirement : AC 120V/60HzPower consumption : 85WDimensions : H : 15-1/4" (387mm)
W : 14-5/8" (372mm)D : 14-3/16" (360mm)
Weight : 26.4 lbs (12 kg)Accesories : Remote Control
2 "AA" BatteriesRod AntennaOwner's Manual
• Design and specifications are subject tochange without notice.
-34-
OWNERS
MANUAL
MODEL NO.934.44817390
IWARRANTY t
TVCR Combination
WARRANTY
For 90 days from the date of purchase, Sears will repair anydefect in material or workmanship in this TVCR combination,
free of charge. For one year from the date of purchase,Sears will supply, at no charge, replacement for defective
parts.
This above warranty coverage applies only to TVCR combi-
nations which are used for private household purposes.
LIMITED WARRANTY ON PICTURE TUBE
After one year from the date of purchase and up to two
years, Sears will furnish, free of charge, a replacement forthe picture tube, if defective. You pay for labor.
Warranty service is available by returning the TVCR combi-
nation to the nearest Sears Service Center/Department inthe United States. This warranty applies only while this prod-uct is in use in the United States.
This warranty gives you specific legal rights, and you may
also have other rights which vary from states to state.
Sears, Roebuck and CompanyHoffman Estates, IL60179
0VMN00702 Printed in MalaysiaB5307UH*****
top related