oval wheel meter series oap - bopp & reuther...
Post on 12-May-2018
229 Views
Preview:
TRANSCRIPT
1
___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________
OVAL WHEEL METERSERIES OaP
1. IDENTIFICATION
Manufacturer Bopp & Reuther Messtechnik Am Neuen Rheinhafen 4 67346 Speyer Phone : +49 (6232) 657-0 Fax : +49 (6232) 657-505
Product type Direct volumetric meter (positve displacement meter)
Product name Oval wheel meter series OaP
2. RANGE OF APPLICATION
3. MEASURING PRINCIPLE ANDSYSTEM CONFIGURATION
3.1 MEASURING PRINCIPLE
3.2 SYSTEM CONFIGURATION
4. INPUT
4.1 MEASURED VALUEVolume and volumetric flow
The field of application of all Oval Wheel Meters of the OaP series comprises measuring, dosage, and controlling of liquids. Oval Wheel Meters of the OI series meet all of these requirements. They are used for the measurement of intermediate and final liquid products such as liquified gases, acids, alkaline solutions, fats, alcohol, solvents, dispersions, polymers, polycondensates, paints, colors, adhesives and other media.
Please note the Oval Wheel Meter's capability to measure liquids with very high viscosities with nearly no pressure loss.The high accuracy provided by the OaP series Oval Wheel Meters ensure a maximum quality of the products being manufactured.
Oval Wheel Meters of the OaP series are manufactured with nominal widths of 25 to 400 mm. Depending on the nominal width they can be used for up to PN 100 with a maximum operating temperature of up to 290 °C.
Oval Wheel Meters belong to the group of direct volumetric meters for liquids with movable partition walls (displacement flow meters). The Oval Wheel Meter consists of a measuring chamber housing with two pivoted oval wheels, which are toothed and roll off in counter-rotations around each other.Each revolution of the oval wheels displaces four discrete volumes of fluid (defined by the space between oval wheel and measuring chamber) through the counter. The number of the rotations is a mea-sure for the volume.
For all these oval wheel meters a wide choice of accessories is available including mechanical, pneumatical, electrical and electronic trans-mitters. Their signals may be used for remote counting, flow measuring and flow control as well as for data processing systems. In addition, automatic batch control systems (with appropriate valves) of the most varied constructions and working principles are available to facilitate dosage of media.
Sensor element: Measuring of the volumetric flow and the volume of liquids is performed by the oval wheel meter series OaP.
Pulse pick-up AG01-08 see D-EN-17230-00 (attached devices
Pulse pick-up AG44 see D-EN-17201-00 Wiegand-Principle (attached devices
Single indicator E and see D-EN-17205-00 double indicator D Mechanical resettable see D-EN-17205-00Roller counter M5 M5, with printer M5B, with pre-setting device M5V or M5BVKS (elecrical switch.) andKSP (pneumatical switch.)step switches sp2, sp22, se2
Universal Smart Transmitter UST see D-EN-1707-00 The UST comes by default with a local display, a 4-20mA current output for the flowrate signal and HART-communication (driver acc. FDT available), as well as a pulse output acc. NAMUR for counting (original or scalable).The oval wheel meter series OaP is also available with a heating jacket, type OUaP.
acc. open collector NPN)
acc. EN50227 NAMUR)
Pulse pick-up AG19 / AG20 see D-EN-17202-00 (attached devices acc. EN50227 NAMUR)
For viscosity > 150 mPa.sSpecial toothed oval wheels from OaP10
___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________
< 0,3 0,3 - 1,5 1,5 - 150 up to 350 up to 1000 up to 3000 mPa.s mPa.s mPa.s mPa.s mPa.s mPa.s
[l/min] [m³/h] [l/min] [m³/h] [l/min] [m³/h] [l/min] [m³/h] [l/min] [m³/h] [l/min] [m³/h]
OaP 25 60 Min 8 0,5
3,0
5 0,3 5 0,3 0,15 1,25 0,075 0,45 0,027
5 Max 48 60 3,6
2,260 3,6
3
1,8 15 0,9 5,4 0,32
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
18 1,1 36 50 1,7 14 0,83 5 0,3
25 120 Min 16 1,0 10 0,6 10 0,6 7 0,42 3,5 0,20
2,4
2,2
1,2 0,072
10 Max 96 6,0
2,2
120 7,2 120 7,2 84 5 42 14,4 0,86
36 73 4,4 99 5,9 77 4,6 39 13,2 0,79
50 360 Min 50
300
3,0 30 1,8 30 1,8 18 1,08 9,0 0,54 3 0,18
50 Max 18 360
220
22 360
297
22 216 13 108 6,5 36 2,2
110 6,6 13 18 198 12 99 5,9 33 2
65 840 Min 100 6 70 4,2 70 4,2 60 3,6 40 15 0,9
125 Max 600
220
200
36 840 50
28
840 50 720 43 480 180 11
13 460 578 35 660 40 440 165 10
80 1440 Min 12 120 7,2 120 7,2 100 6 60 3,6 30 1,8
250 Max 1200 72
26
1440 86 1440 86 1200 72 720 43 360 22
440 790 48 1100 66 1100 66 660 40 330 20
100 3600 Min 400
2400
15 15 200
3000
2750
150 9 75 4,5
600 Max 140
24
3600
250
220 3600
2750
250
220 180
12
1800 110 900 54
880 53 1800 110 165 165 1650 100 830 50
150 6000 Min 800 48 500 30 500 30 400 15 120 7,2
1200 6” Max 4800 6000
2800
360 6000 360
220
4800 180 1400 86
1800 110
290
170 3900 4400 170 1300 79
200 9600 Min 1300 80 800 48 800 48 660 40 400 12
2000 8” Max 7800
2900
480 9600 580
260
9600 580 7900 480 4800 140
180 4400 6100 350 7300 440 4400 130
300 14400 Min 120 1200 72 1200 72 1000 60 600 36 300 18
3200 12” Max 12000
2000
720
260
14400 860 14400 860 12000 720 7200 430 3600 220
4400 6600 400 8800 530 11000 660 6600 400 3300 200
400 Min 3200 120 120 1500 90 1000 60 400 42
4000 16” Max 19000 1200
200
1400 1400 18000 1100 12000 720 4800 290
7300 440 11000
24000
2000
660 15000
24000
2000
880 17000 1000 11000 660 4400 260
Type OaP5/10 OaP50 OaP125 OaP250 OaP600 OaP1200 OaP2000 OaP3200 OaP4000
Nominal width DN25 DN50 DN65 DN80 DN100 DN150 DN200 DN300 DN400
Length DIN PN16/PN25/ L PN40 220 325 450 550 650 800 900 900 1200 (mm) ANSI150/ANSI300
DIN PN100 250 400 500 600 700 900 ANSI 600
OUR EXPERIENCE COUNTSLIQUIDS
4.2 MEASURING RANGE
5. CHARACTERISTIC PARAMETER
6. CONSTRUCTIONS DETAILS
6.1 DESIGN / DIMENSIONS / WEIGHTS
Type DN Flowrate Qmax
[l/min]
OaP
OaP
OaP
OaP
OaP
OaP
OaP
OaP
OaP
2,5
30
28
24
290
260
250
3000
2800
2,4
29
26
24
290
260
200
2400
2200
Measuring range for water upon request
5.1 REFERENCE CONDITIONS The calibration facilities of Bopp & Reuther Messtechnik are accepted by PTB and are traceable to international laboratory standards.
Pressure: up to 7 bar, temperature: 0 to 30°C
5.2 ACCURACYlin. ± 0,05% to ±0,1% of measured value depending on the range of
5.3 REPEATABILITY± 0,02%
24000
Standard measuring range 1:10Special measuring range up to 1:40
properties of liquid
3
Dim. 1: DIN PN 16, 25, 40 / ANSI 150, 300
Dim. 2: DIN PN 100 / ANSI 600
Oval wheel meter series OaP with pulse pick-up AG19, Ag20, AG44 or AG01-08 apply following dimensions:
OaP 5 – OaP 4000 with universal smart transmitter UST
AG19 / AG20 AG44
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200 OaP2000 OaP3200 OaP4000
Nominal width DN25 DN25 DN50 DN65 DN80 DN100 DN150 DN200 DN300 DN400
Dim. 1 D 144 165 320 400 480
258
614
280
665 665 665
(mm) h 142
217
82
296
264
28
104
260
150 176 400 658 748
H1
314
282
341 381 428 481 588 824 914
H 2
185
20
309 349 396
261
449 556 792 882
Weight ca. (kg) 62 81 156 510 895 1225 1925
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200
Nominal width DN25 DN25 DN50 DN65 DN80 DN100 DN150
Dim. 2 D 150 345 440 505
278
665
(mm) h 70 81
223
121
292
166 310
H 1
356 363 381 409 448
202
495 548
H 2
303
29
331 349 377 412
261
463 516
Weight ca. (kg) 54 99 141 441 870
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200 OaP2000 OaP3200 OaP4000
DN25 DN25 DN50 DN65 DN80 DN100 DN150 DN200 DN300 DN400
Dim. 1 D 144 165 320 405 480 614
280
665 665 665
(mm) h 142 82 104
260
150 176 400 658 748
H (USTI/USTX) 340 419 437 464 504 551
258
604 711 947 1037
H (USTD) 328 407
27
425 452 492 539
260
592 699 935 1025
Weight ca. (kg) 19 61 80 155 509 894 1224 1924
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200
DN25 DN25 DN50 DN65 DN80 DN100 DN150
Dim. 2 D 150 345 440 505
278
665
(mm) h 70 81
223
121
292
166 310
H (USTI/USTX) 479 486 503 532 571
202
618 671
H (USTD) 467
28
474 491 520 559
260
606 659
Weight ca. (kg) 53 98 140 440 869
If a temperature extension is used, increase the dimension H about 3 00 mm,
as well as the weight about ca. 2 kg.
This applies to the versions DIN PN 16, 25, 40 / ANSI 150, 300, as well as DIN PN 100 / ANSI 600.
Nominal width
AG01-08
H 3
358147 226 244 271 311 411 518 754 844
3
4
Version with roller counter M5 or M5B (roller counter M5 combined with printer B)
OaP5 – OaP 4000 with mechanical indicator E, D or roller counter M5 and optional pulse pick-up AG19, Ag20, AG01-08
Version with single indicator E or double indicator D
Version with roller counter M5V or M5BV (roller counter M5 combined with printer B and preset counter V)
DIN PN 16, 25, 40 / ANSI 150, 300
OaP …E / OaP ...D OaP …Es / OaP …Ds OaP … wE / OaP …wD
OaP … M5 OaP … M5s OaP … M5B OaP … M5sB
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200 OaP2000 OaP3200 OaP4000
Nominal width DN25 DN25 DN50 DN65 DN80 DN100 DN150 DN200 DN300 DN400
D (mm) 144 165
82
320 405 480 614
280
665 665 665
Dimensions h 142
235
104
260
150 176 400 658 748
H1 314 332 358 399 446
258
499 606 842 932
H 315 394 412 438 479 526 579 686 922 1012
H3 360 439 457 483 524 571 624 731 967 1057
H4 365 444 462 488 529 576 629 736 972 1062
H5 395 474 492 518 559 606 659 766 1002 1092
H6 370 449 467 493 534 581 657 741 977 1067
H7 440 519 537 563 604 651
260
266
269
273
276
727 811 1047 1137
OaP … M5V OaP … M5sV OaP … M5BV OaP … M5sBV (shown with pneumatical switch) (shown with with electrical switch)
Weight ca. E,D 19
25
28
61 80 155 509 894 1224 1924 (kg)
M5 33
27
67 86 161 515 900 1230 1930
M5B 36 70 89 164 518 903 1233 1933
M5V 32 40 74 93 168 522 907 1237 1937
M5BV 35 43 77 96 171 525 910 1240 1940
OUR EXPERIENCE COUNTSLIQUIDS
(mm)
5
6.2 MATERIAL
DIN PN 100 / ANSI 600
L2 D2 G2
Housing Cast steel Cast steel Cast steel
Chamber Aluminium Cast iron Cast iron
Oval wheels Aluminium Cast iron Cast iron
Bearing Hard carbon Cast iron Hard carbon
Type OaP5 OaP10 OaP50 OaP125 OaP250 OaP600 OaP1200
Nominal width DN25 DN25 DN50 DN65 DN80 DN100 DN 150
D (mm) 150 345 440
202
505
278
665
Dimension h 70 81
223
121
292
166 310
H1 374 381 398 427 466 513 566
H 454 461 478 507 546 593 646
H3 499 506 523 552 591 638 691
H4 504 511 528 557 596 643 696
H5 534 541 558 587 626 673 726
H6 509 516 533 562 601 648 701
H7 579 586 603 632 671
260
266
269
273
276
718 771
Weight ca. 53 98 140 440 869 (kg)
M5 34 59 104 146 446 875
M5B 37 62 107 149 449 878
M5V 41 66 111 153 453 882
M5BV 44 69 114 156 456 885
L2 D2 G2
OaP 5 •
OaP 10 •
OaP 50 •
OaP 125 • •
OaP 250 • •
OaP 600 •
OaP 1200 •
OaP 2000 •
Available material groups
7. OPERATING CONDITIONS
7.1 DEGREE OF PROTECTION Ambient temperature Housing EX-protection
OaP: Mech. EX-protection, see cert. of conformityAG19, AG20: -25 up to +90°C IP54 II 2G EEx ia IIC T6AG44:
-50 up to +60/+75/+85°C IP65 II 2G EEx ib IIC T6/5/4
Indicator E, D: -20 up to +110°C IP54M5: -20 up to +60°C IP54M5 accessories:
see D-DE-17205-00
USTI: -20 up to +70°C IP65 II 1/2G EEx ia IIC T4
USTX: -40 up to +60°C IP65 II 2G EEx d [ib] IIC T4
USTD: -40 up to +70°C IP65 II 2G EEx d [ia] IIC/IIB T6
Degree of protection (housing) IP acc. IEC 529 / EN 60529, EX-approval directive 94/9/ECAttention: The LC-displays of the electronical counters are working from -10°C up to +70°C
(mm)
For meter with external regulation,pulse pick-up AG19 / Ag20 / Ag01-08 or extensionthe dimensions H1 to H7 icrease by about:
External regulation+ 42 mm
Pulse pick-up AG19+ 115 mm
Pulse pick-up AG20+ 115 mm
Extension+ 300 mm
If a temperature extension is used, increase the dimension H about 300 mm, as well as the weight about ca. 2 kg
OaP 3200
• •
•
OaP 4000 •
•
•
•
AG01-08: -30 up to +70°C Ip67 II 2G Ex d IIB T6 Gb
Pulse pick-up AG01-08+ 190 mm
6
__________________________________________________________________________________________________________________
Special toothed oval wheels is the standard for the material version D2
For liquified gases with special tolerances max. 20°C (version D2 not suitable).
OaP with mech. indicator or AG19/AG20/AG01-08 with extension 400 mm and 2. magnetic coupling available up to -60°C (pay attention to
OaP AG44 with or without UST with special tolerances, special bolts and nuts up tp -40°C (pay attention to pressure reduction).
Nominal pressure* PN 25 PN 40 PN 100 ANSI 150 ANSI 300 ANSI 600 DIN2544 DIN2545 DIN2547
OaP5 D D D D D
OaP10 D D D D D
OaP50 D D D D D
OaP125 L-D L-D L-D L-D L-D
OaP250 L-D LL-D L-D L-D L-D
OaP600 L-D-G L-D-G L-D-G L-D-G L-D-G
OaP1200 L-D L-D L-D
OaP2000 L-D L-D L-D L-D
OaP3200 D D D D
OaP4000 D D D
OaP D2 -10 up to 90°C >90 up to 110°C >110 up to 170°C >110 up to 290°C
OaP mech. indicator
OaP AG19/AG20/AG01-08 Standard Extension Extension + High temperature magnet coupling
OaP AG44
OaP AG44 UST High temperature pulse pick-up
OaP G2 -10 up to 90°C >90 up to 110°C >110 up to 170°C >110 up to 230°C
OaP mech. indicator Special tolerances Extension + Special tolerances +
OaP AG19/AG20/AG01-08 Standard Extension+Special tolerances High temperature magnet coupling
Extension+Special tolerances+ OaP AG44
Special tolerances High temperatuere pulse pick-up
OaP AG44 UST Special tolerances + High temperatuere pulse pick-up
7.2 PROCESS PRESSURE / PROCESS CONNECTIONAvailable materials see chapter 6.2
7.3 OPERATING TEMPERATURE LIMITAvailable materials see chapter 6.2
OUR EXPERIENCE COUNTSLIQUIDS
(2)(1) (3)
* at temperatures over 120°C / lower -10°C pay attention to pressure reduction!
(1) Flange drilled acc. ANSI 150, (housing acc. DIN PN 25, 40 depends on the material) (2) Flange drilled acc. ANSI 300, (housing acc. DIN PN 25, 40 depends on the material) (3) Flange drilled acc. ANSI 600, (housing acc. DIN PN 100 depends on the material)
Extension +high temperature pulse pick-up
OaP L2 -10 up to 60°C
OaP mech. indicator
OaP AG19/AG20/AG01-08 Standard
OaP AG44
OaP AG44 UST
pressure reduction).
Pre
ssure
loss
in [bar]
1,00,9
150*
350*
1000*
5
Flowrate
*dyn. viscosity in [mPas]
0,80,7
0,60,50,40,30,20,1
0OaP 10 DN 25
OaP 50 DN 50
10 15 25 30
0,3 0,6 0,9 1,5 1,8
10 20 30 40 50
0,6 1,2 1,8 2,4 3
[l/min][m³/h]
70*40*10*
0,9*
20
1,2
Pre
ssure
loss in
[bar]
1,00,9
150*
350*
1000*
100
Flowrate
*dyn. viscosity in [mPas]
0,80,7
0,60,50,40,30,20,1
0200 400 600
6 12 24 36
200 400 600 800 1000
12 24 36 48 60
500 1000 1500 2000 2500
6030 90 120 150
60 150 180
1000 2000 3000
[l/min][m³/h]
70*
40*
10*
0,9*
240
4000
500
30
300
18
700
42
1200
723000
180
300
5000
60
1000
120
2000
180
3000
240
4000
300
5000
360
6000
420
7000
480
8000
180
3000
360
6000
540
9000
720
12000
60
1000
300
5000
600
10000
900
15000
1200
20000
OaP 125 DN 65
OaP 250 DN 80
OaP 600 DN 100
OaP 1200 DN 150
OaP 2000 DN 200
OaP 3200 DN 300
OaP 4000 DN 300
7
7.4. PRESSURE LOSS
Standard toothed oval wheels
Special toothed oval wheels
Pre
ssure
loss
in [bar]
1,00,9
150*
350*
1000*
100
Flowrate
*dyn. viscosity in [mPas]
0,80,7
0,60,50,40,30,20,1
0OaP 125 DN 65
OaP 250 DN 80
OaP 600 DN 100
OaP 1200 DN 150
200 400 600
6 12 24 36
200 400 600 800 1000
12 24 36 48 60500 1000 1500 2000 2500
6030 90 120 150
60 150 180
1000 2000 3000
[l/min][m³/h]
70*40*
10*
6*
0,9*
240
4000
500
30
300
18
700
42
1200
723000
180
300
5000
60
1000
120
2000
180
3000
240
4000
300
5000
360
6000
420
7000
480
8000
180
3000
360
6000
540
9000
720
12000
OaP 2000 DN 200
OaP 3200 DN 300
Pre
ssure
loss
in [bar]
1,00,9
150*
350*
1000*
Flowrate
*dyn. viscosity in [mPas]
0,80,7
0,60,50,40,30,20,1
0OaP 5 DN 25
OaP 10 DN 25
OaP 50 DN 50
10 20 30 40 50
0,6 1,2 1,8 2,4 320 40 60 80 100
63 3,6 4,8 6
3 6 9 12 15
50 100 150 200 250
[l/min][m³/h]
70*
40*
10*6*0,9*
18
300
___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________
8. CERTIFICATES AND APPROVALS
EC-type approvals
• Universal Smart Transmitter Typ UST EExia DMT 99 ATEX E 014 X• Universal Smart Transmitter Typ UST EExd [ia] DMT 00 ATEX E 025 X• Universal Smart Transmitter Typ UST EExd [ib] BVS 04 ATEX E 022 X• Pulse pick-up AG01-08 (shaft encoder 01-08) TÜV 15 ATEX 131621 X• Pulse pick-up AG19, AG20 (proximity switch type SJ 3,5N) PTB 99 ATEX 2219 X• Pulse pick-up AG42, AG43 (Wiegand Sensor with preamplifier Typ PV11) DMT 00 ATEX E 063 X
Directive 2004/108/EC (EMC - Electromagnetic Compatibility)/
EC-type approvals modul B + C1
Measuring Instrument Directive MID 2004/22/ECOIML audit report, Evaluation Certficate (NMI) and 2014/32/EU
EC-certificate of conformity (Bopp & Reuther Messtechnik)
Directive 94/9/EC (Ex-protection)EN 13463-1: Non-electrical equipment for use in potentially explosive atmospheresEN 1127-1: Ex-protection, basic concepts and methodology EN 60079-0: Explosive atmospheres. Equipment. General requirements EN 60079-11: Intrinsically safety „i“EN 60079-1: Flameproof enclosures „d“
• EN 61000-6-2 : Generic standards.
• EN 61000-6-3: Generic standards. Emission standard for residential, commercial and light-industrial environments
Immunity for industrial environments
Directive 97/23/EC (PED - Pressure Equipment Directive)/
• DIN EN 10213• AD-Pamphlets
Type-approval certificate under German law
Measuring Equipment Directive - MID
Other approvals and certificates
SIL2: OaP AG19x, OaP AG20x according IEC 61508:1999
EN 55011: Industrial, scientific and medical (ISM) radio-frequency Equipment. Electromagnetic disturbance characteristics. Limits and methods of measurement
NAMUR NE 21: Electromagnetic Compatibility (EMC) of Industrial Process and Laboratory Control Equipment
EN 61010-1: Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
EN 60947-5-6: Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. DC interface for proximity sensors and switching amplifiers (NAMUR).
Lloyds Register, Silicone-free
Edition September 2016Subject to modificationsD-EN-01220-00-Rev. C
Bopp & Reuther Messtechnik GmbH
Am Neuen Rheinhafen 4
67346 SpeyerPO-Box 17 09
67327 Speyer
T +49 . 6232 . 6 57 . 0
F +49 . 6232 . 6 57 . 5 05
info@bopp-reuther-mt.de
www.bopp-reuther-mt.de
9. DOCUMENTATION
MANUALS
A-EN-01221-00 manual OaP with pulse pick-up and/or mechanical counters A-EN-01222-00 manual OaP with Universal Smart Transmitter UST
D-EN-17201-00 pulse pick-up AG4xD-EN-17205-00 single indicator E and double indicator D D-EN-17205-00 mechanical resettable roller counter, series M5 D-EN-17207-00 Universal Smart Transmitter UST
ACCESSORIES
D-EN-17202-00 pulse pick-up AG19 and AG20
2014/30/EU
2014/68/EU
D-EN-17230-00 pulse pick-up AG01-08
top related