omax training presentation by ankit

Summer training Presentation

By:Ankit Kumar

13162005

OMAX AUTOS Ltd. (Binola Plant)

Omax Autos Limited is one of the leading manufacturers of Auto & Non-Auto Components in India.

Established in 1983, the company specializes in sheet metal components, tubular components and machined components.

Turnover and Business Areas

Turnover of the company For the finance year 2015Was INR 1,027 crore approx. 155M USD

Plants Of Omax

Omax is a group of ninePlants, which are situatedAt different locations in India.

Automax Plant Binola

It was established in 2006 At Binola village of Gurgaon near N.H-8, in a land area of 72000 sq. meter.

Features of the plant

Precision Machining

Tool Room

Press Shop

Welding & Assembly

Specialities of Plant

Machined Components- Piston Rods. Stampings (Shroud fan / Rotors/

Suspension parts)

Assemblies (Tractor Front Axle/ Oil pump Body)

Sprockets

Parts Manufactured at this plant

Piston rods “Shocks & Struts” For Maruti

Sprockets forHero HF Deluxe

Rear Fender AssyFor New Holland

Hinge Assembly Trunk For Honda City

Front Axle

Department’s overview1.Part & tool design and simulation

They make use of the latest software like 3d Modelling Software from I-deas, Pro-E, Unigraphics and 3-D Analysis Software LS-Dyna.

2.Tool Room

It is equipped with state-of-the-art Tool Room set-up with latest CAD/CAM facilities3D CMM, Wire Cut EDMs and Vertical Machining Centres facilitating SPMs and low cost automation.

3.Press Shop

Plant have Presses ranging from 10T to 1200T, capability to handle sheets from 0.6mm to 12mmand produce an extensive array of stamped & welded assemblies.

4. Welding and assemblyIn this department most of the work of manufacturing is

done as it consist of many CNCs and machining machines.Parts manufactured in other departments are also

assembled here.

CNC pipe bending

Piston rod manufacturing facility

Sprocket manufacturing Facility

Induction Hardening facility

Facilities provided in this department are as

How a sprocket is manufactured

BROACHINGHOBBINGDEBURRINGBARRELLINGDRILLINGCHAMFERINGTAPPINGSTAMPINGHARDENING

In the manufacturing of sprocket following processes are done

Raw material

In the very beginning the raw material company gets is as shown picture,it is called as sprocket Bop. Then many other processes are done to give the shape of sprocket to this sprocket Bop.

BROACHING- It is a machining process that uses a toothed tool,called a broach, to remove material.

Hobbing- It is a machining process for gear cutting, cutting splines, and cutting sprockets on a Hobbing machine, which is a special type of milling machine. The teeth or splines are progressively cut into the workpiece by a series of cuts made by a cutting tool called a hob.

Deburring is simply a finishing method used in industrial settings andmanufacturing environments.Metal is frequently machined using many processes in order to create pieces of specific shape and size, and it may be welded, moulded, cast, trimmed, slit or sheared.

Deburring-

BarrellingAbrasive media, work pieces, compound and water are loaded into barrelsat a certain ratio and are put into motion. Abrasive media and work pieces rub each other caused by the difference in weight, shape, speed and direction of abrasive media and work pieces. The friction generated under such movement results in surface finishing.

DrillingDrilling is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid materials. The drill bit is usually a rotary cutting tool, often multipoint. The bit is pressed against the workpiece and rotated at rates from hundreds to thousands of revolutions.

Chamfering The finishing process, which removes excess material that remains on a metal part after fabrication, is an important step. It ensures that a part falls within specifications, regardless of whether its intended application will be simple or highly sophisticated.

Tapping Tapping is the process of cutting a thread inside a hole so that a cap screw or bolt can be threaded into the hole. Also, it is used to make threads on nuts. Tapping is done with a tool called a "Tap".

Stamping Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a press where a tool and die surface forms the metal into a net shape.

Hardening It is a metallurgical and metalworking process used to increase the hardness of a metal. The hardness of a metal is directly proportional to the uniaxial yield stress at the location of the imposed strain. A harder metal will have a higher resistance to plastic deformation than a less hard metal.

ALL DONE

Hey Friends You Can contact me for any queries about this ppt

Ankit Sharma Vashist

Twitter

FACEBOOK