norways guide to the uk supply chain
Post on 13-Mar-2016
238 Views
Preview:
DESCRIPTION
TRANSCRIPT
The Norway’s Guide series provides information on
companies, products and services in the UK Supply Chain.
Norway’s Guide is produced in both print and eBook formats.
Norway’s Guide is distributed free of charge to 4,000 companies,
57,000 engineers and at most major exhibitions in Norway.
For more information about Norway’s Guide, please contact the
Norwegian Collaboration Centre on +44 191 645 0232 or send an e-
mail to info@norway2uk.com.
Norway’s Guide can be viewed and downloaded at
www.norway2uk.com.
The design of this publication may not be used without the express
permission of the Norwegian Collaboration Centre.
Copyright © 2010 Norwegian Collaboration Centre
Vol. 2010
Published August 2010 by the Norwegian Collaboration Centre Ltd.
Cobalt Business Exchange,
Cobalt Business Park,
Silverlink,
Newcastle-upon-Tyne,
NE28 9NZ,
Tel: +44 191 645 0232
Email: info@norway2uk.com
Web: www.norway2uk.com
Director
MIke Pedersen
Editor
Claud Kelley
Accounts Managers
Mike Pedersen, Claud Kelley, Eirik Romslo, John Anderson
Production & Distrubution
Georgina Askeland, Petromedia AS
Layout
Chris King
Design
digitalized.co.uk
QuickFacts:UK
Size: 243,820 km2
Population: 61.4m
Main Cities: London, Birmingham, Manchester, Newcastle,
Aberdeen, Edinburgh, Cardiff, Belfast
Exchange Rate: NOK/GBP 0.11 (Av. 2009)
Significant opportunities :
• Offshore/Energy
• Renewables Technology
• Advanced Engineering
• Telecommunications/ICT
• Creative & Media
• Business & Consumer Services
• Life Sciences
GDP (nominal) 2009 estimate
- Total $2.183 trillion
- Per capita $35,334
QuickFacts:Norway
Size: 385,252 km2
Population: 4.9m
Main Cities: Oslo, Bergen, Stavanger, Trondheim
Exchange Rate: GBP/NOK 9.24 (Av. 2009)
Significant opportunities:
• Offshore/Energy
• Renewables Technology
• Quality Consumer Goods
• Telecommunications/ICT
• Healthcare and Biotechnology
• Medical Equipment/e-Health
GDP (nominal) 2009 estimate
- Total $382.983 billion
- Per capita $79,085
Print & eBook, Distribution & Access
Norwegian Companies - 4,000
Key management & engineers in Norway - 57,000
NCC business database - 14,000
Trade fairs & exhibitions
Online enquiries through Norway2UK.com
Industry organisations & their contacts
Chambers of Commerce & their contacts
Contributing partners
Newsletters
Magazines
Norway’s Guide
Table of Contents
About Norway’s Guide
Alphabetical Listing of Companies
Forword by:
NOF Energy
Energy Industries Council
British-Norwegian Chamber of Commerce
Marine Design Centre
And More Coming Soon...
Presentation of Cooperative Partners
Company Presentations
Index by Product/Service Categories
About this Issue
Norway’s Guide
Information is invaluable in today’s world of business.
Norway’s Guide provides Norwegian decision makers
with access to one of the best supply chains in the world.
The UK companies featured in this publication provide
quality products and services that can be supplied to
Norway. By providing Norway with this information we
aim to promote further trade and build stronger
relationships across the North Sea.
Companies included in Norway’s Guide have specifically
stated that they want to work with Norway. They may
have supplied directly, or indirectly, but have now put
themselves forward to work more closly with Norway.
This publication is produced annually and distributed
across Norway. You can also access the eBook at
www.norway2uk.com where it is updated throughout
the year.
The Norwegian Collaboration Center has been
specialised for over 10 years in the ways of Norwegian
and UK business. We work closely with government,
industry and research organisations on developing trade
between Norway and the UK.
With this new publication we aim to build on our past
success and help you find the best suppliers in the UK.
UK Supply Chain
This issue of Norway’s Guide focuses on companies
within the UK who supply to the energy industry. The
companies featured in this publication have the ability
and the quality to provide value to the Norwegian
supply chain.
The trading relationship between Norway and the UK
dates back centuries. It was not until the late 1960’s and
the discovery of oil in the North Sea that things became
really interesting.
Since then both countries have grown up servicing the
North Sea, both building 40 years of skills and
experience in the sector. With the next era of renewable
energy quickly approaching, the past 40 years will prove
invaluable to develop this fledgling industry.
With the increase in activity an efficient supply chain is of
the ut most importance. One of the worlds best supply
chains is just across the water in the UK, it is now more
important than ever to have access to the quality
companies within it.
Listing of Companies
Advanced Titanium Metals
Absoft
A & P Group
Blue Diamond Engineering
Costain
Cullum Detuners
Darchem
Dickinson Dees
DUCO
Eastern Airways
IHC Engineering
Izumi Products
J Newsome Tools
JWF Process Solutions
Mech-Tool Engineering
Newburgh Engineering
Newcaslte Chambers ofEngineering
Noel Village
Osborne Engineering
Palintest
Piptawse
Premier Hytemp
R Blackett Charlton
Responsive Engineering
S & C Energy
SBV Engineering
Senergy
Sonart Electronics
Stellex
Thermal ResourcesManagement
Vanguard
VCL
Wessington Cryogenics
White Bros
W.J. Hunter
and many more to come...
Being Part of an International Networka history of co-operation
There is strong co-operation rooted in centuries of history between the UK and
Norway. The past 40 years has seen the oil and gas industry dominate activities
between the two countries. In the future, both old and new energy sources will
continue to strengthen the links that have already been forged over the North Sea,
as well as creating new opportunities for the next 40 years of activity.
NOF Energy is delighted to be involved in
this very important guide, which
highlights the strong and ever-growing
affiliation between the Norwegian and UK
energy sector supply chains.
Norway continues to be a significant
market for NOF Energy members. A
considerable number actively export to
the Norwegian oil and gas sector with
many working through local partners,
demonstrating a positive commitment to
mutually-beneficial working relationships
between the two countries.
To this end, we have formed effective
partnerships with organisations like the
Norwegian Collaboration Centre to
ensure businesses from both countries
can take advantage of potentially
lucrative opportunities.
NOF Energy, in partnership with the
Norwegian Collaboration Centre as well
as UK Trade & Investment, Department
of Energy and Climate Change and the
North East of England Regional
Development Agency, One North East,
has implemented a number of initiatives
to bring the two countries’ markets
closer together.
These mutually-beneficial agreements
allow us to tap into local contacts,
encourage respective memberships to
work together in partnering arrangements
and receive support for reciprocal visits.
A series of market visits led by NOF
Energy have allowed UK companies to
engage directly with their Norwegian
counterparts to form relationships and
secure new business.
The benefits of taking part in the visits
include direct contact with the main
players through targeted client visits,
receptions to meet local businesses, a
comprehensive in-country briefing and
building links with support organisations.
NOF Energy has also assisted with a
number of events, which have been held
in the UK to introduce Norwegian
industry to our supplychain. Among
these events was Rediscover North East
in Newcastle, which attracted a large
delegation of Norwegian companies
aiming to strike up new relationships with
British suppliers.
NOF Energy has established amembership package forNorwegian businesses thatdelivers a gateway to the UKmarket and step-by-step supportfrom our experienced team.
With a membership in excess of 360
companies serving the oil, gas, nuclear
and offshore wind sectors, NOF Energy
provides business development services
that assist members in winning new
contracts, gaining industry intelligence
and strengthening their position in a
growing international market.
In addition to working to promote British
suppliers to the global energy market,
NOF Energy also supports international
companies looking to access the UK.
Being part of a successful international
network is key to the future success of
supply chain companies. NOF Energy
has established a bespoke membership
package for Norwegian businesses that
delivers a gateway to the UK market and
step-by-step support from our
experienced team.
Essentially, it also provides access to
NOF Energy’s strong and diverse
network of members who are keen to
work together and form inter-trading
partnerships.
The UK supply chain is held in very high-
regard by the Norwegian energy market
and the many years of trading between
the two countries is testament to the
consistent innovation and first-class
skills offered by British companies.
NOF Energy, through its suite of
international business development
services, aims to be at the heart of this
relationship and will continue to facilitate
new and fruitful partnerships between
companies from both countries.
By Joanne Leng, Director Business
Development, NOF Energy.
www.nofenergy.co.uk
business@nofenergy.co.uk
+44 (0) 191 384 6464
page i
foreword
NOF Energy at Bergen Group’s Rosenberg yard in Norway
The UK and Norwaya close collaboration
There are few closer relationships in the energy sector today than between the
UK and Norway. From the Ormen Lange gas field on the Norwegian continental
shelf which is to meet so much of the UK’s future gas needs to the hundreds of
UK companies that converge at ONS in Stavanger every two years, to the
progress seen in renewable technology and energy efficiency, there’s no doubt
that Norway is a key target for the UK supply chain.
ICDataStream, the EIC’s sophisticated,
well established database that tracks
over 7,800 projects in the global energy
industry, backs this up. If you search
under current and future offshore
projects in Europe, the UK is in the lead
with 191 projects followed by Norway
with 126. If you search under mid-stream,
Norway has 10 current projects – behind
just Russia, England, Italy and Germany,
and has a number of renewable (8) and
power projects (10) as well.
It is for this reason that the EIC, as the
leading trade association for UK
companies supplying goods and services
to the energy industries worldwide, is so
delighted to be supporting the latest
edition of Norway's Guide to the UK
Supply Chain.
Established in 1943, the EIC has around
600 member companies and provides
them with the capability to understand,
identify and pursue global business
opportunities. The EIC membership
comprises contractors and suppliers
from all areas of the energy sector,
employing up to one million people and
generating up to £100 billion in revenues
from their UK operations.
At ONS in 2008 we had the
honour of welcoming Crown
Prince Haakon of Norway to our
stand and this year we will be
bringing 41 companies to
Stavanger.
The UK supply chain has a huge amount
to offer Norwegian companies in so
many different ways:
Firstly, whether it be decommissioning
projects or supporting and enhancing
current operations, UK companies are
ideally placed to support Norway in its
offshore oil & gas operations. There is no
better example of this than at the
Offshore Northern Seas (ONS), held
every two years, in Stavanger where the
EIC always sells out its exhibition space
for UK companies. In 2008 we had the
honour of welcoming Crown Prince
Haakon of Norway to our stand and this
year we are offering even more space
and will be bringing 41 companies to
Stavanger. These include instrumentation
providers, Advanced Sensors;
petrochemical suppliers, Castrol
Offshore; pump and valve specialists,
Clyde Union; heat transfer specialists,
Heatric; CCTV suppliers, Synectics
Industrial Systems; WEG Electric Motors;
and many others.
There are many other energy sectors
where the UK is and will continue to
support Norwegian companies.
For example, National Grid’s
announcement in 2009 that it was in
talks with Statnett to lay a £1 billion cable
beneath the North Sea to connect the
countries offers significant opportunities
to the UK supply chain.
It would enable the UK to import
electricity from hydroelectric plants in
Norway but also allow the UK to export
electricity generated from offshore wind
farms in the North Sea to Norway.
And as the UK continues to focus on
onshore and offshore wind farms as part
of its drive to generate up to 30 per cent
of electricity from renewables by 2020,
there is a huge amount of expertise the
UK supply chain can offer to Norwegian
companies.
Carbon capture storage is another area
where the two countries are working
together following on from the 2009
announcement by the UK and Norway to
commission a study into assessing the
North Sea’s potential for storing
European CO2 emissions.
UK companies are playing a leading role
in finding environmentally sound
solutions to the challenges of worldwide
rising energy demand as well as
supporting current oil & gas operations in
maximising recovery. We encourage
Norwegian companies to find out more
about everything the UK has to offer.
By Mike Major, the Chief Executive, the
EIC (Energy Industries Council)
www.the-eic.com
info@the-eic.com
+44 (0) 20 7221 2043
page ii
Mike Major, CEO of the EIC – far left, with Crown Prince Haakon of Norway
An Outstanding Maritime Heritagecentre of excellence for marine design
Norway and the UK have one of the longest maritime relationships in history. Since
the days of the Vikings the maritime lives of the UK and Norway has been entwined.
The UK has been one of Norway’s most important trading partners. Today, the eco-
nomic links between the two countries has never been stronger. With increasing oil,
gas and renewable energy activity in the North Sea and beyond, the world-class
maritime industries in both countries will play a vital role in future success.
For Norwegian businesses, the Marine
Design Centre (MDC) offers a simple
solution to marine project requirements.
One contact with MDC will provide
access to the array of capability present
in the membership, with the suitably
experienced and qualified resource
identified by MDC’s business
development team.
This could be a specialist, niche resource
provided by a single company or a
collaborative team comprising designers
and engineers with the appropriate skills
from a number of MDC members.
The MDC in Newcastle, North East
England, is building on the region’s
history of innovation in shipbuilding to
make collaboration with expert marine
design and engineering companies easy.
The MDC provides facilities for
companies to work together and helps
businesses to find partners with the
required experience and capability.
The company was established in 2007 to
support design and engineering
companies operating in the marine
sector, and now provides business
development and marketing services,
networking opportunities, events and
training, as well as a design office which
is open for companies to use for joint
projects or as a growth facility.
MDC operates as a hub for its
membership of innovative and pioneering
companies, increasing opportunities to
bid for new projects. This is achieved
through collaborative working, ensuring
that members have access to the very
best in training and new technology and
that there is a growing supply of talented
people coming into the industry.
Since it was launched, the company has
set about promoting the wide ranging
capability of its members, in the offshore
oil & gas, offshore renewable,
commercial shipping and naval defence
markets. MDC has developed
relationships with potential customers in
the UK and internationally, receiving a
positive response to the significant
capability available.
As well as attending events, MDC has
played host to a number of guest speakers
and inward trade delegations, with plans in
place to continue with its successful series
of networking events with guest speakers
operating in the key markets.
The capability of MDC’s members in
these key markets extends to
approximately 600 designers and
engineers, covering a wide range of skills
and disciplines. Allied to the Marine
School at Newcastle University, the UK’s
leading marine university, clients can
access a full range of range of project
services from a collection of leading
names in the sector, taking in research
and development, concept design,
detailed design and engineering, marine
and offshore consultancy activities,
specialist equipment design and
manufacture, heavy engineering and
fabrication and ship repair, conversion
and building.
Simon Ellis, Business Development
Manager
www.marinedesigncentre.com
simon.ellis@marinedesigncentre.com
+44 (0) 191 255 1710
page iii
foreword
MDC members gather on the flight deck of HMS Illustrious
The design office at the Marine Design Centre
MDC members gather for networking event
British - Norwegiancenturies of commerce
Although Britain and Norway have been trading partners for centuries, the trade
links between the two have changed and developed dramatically in the past 50
years, not least due to the strong cultural and historical ties between the two
countries.
The UK is Norway’s single most
important export market, and raw
materials are well represented in the
export figures, e.g. oil and gas related
products, metals, food, and wood
products. Many of these are developed
further by UK based companies and sold
on to the rest of the world.
However, other, more high tech products
and services have been exported in
recent years reflecting a change in
economic output in Norway and building
on the very high levels of educational
achievement and development of service
industries.
British exports to Norway include
machinery, data and office equipment, as
well as electronic and scientific
equipment. British companies are
amongst the largest foreign investors in
the Oslo Stock Exchange, particularly in
the shipping, banking, and insurance
sectors.
Norway’s economic, political, and social
stability provide a sound business
environment, and foreign investors are
also grateful for Norway’s membership of
the European Economic Area, which,
although not full membership of the EU,
nevertheless extends many of the EU
business and economic directives into its
market.
The British-Norwegian Chamber of
Commerce (BNCC) is a non-profit
organisation based in Oslo, striving to be
the leading networking forum for the
promotion of British-Norwegian trade,
providing a professional and social
environment in which we introduce
organisations to the British-Norwegian
business community in Norway.
We host regular events throughout the
year, with speakers who cover topics of
interest such as business life in the two
countries, offering opportunities to meet
business leaders who are actively
involved in the British and Norwegian
markets. Discussions and social
gatherings follow the presentations,
allowing ample opportunity for
networking. Our events usually take
place at the British Embassy in Oslo,
where members have the opportunity to
meet Embassy representatives.
Offering a network of over 200 active
participants in excess of 100 member
companies and collaborators, from a
broad range of sectors including energy,
shipping, IT/media, financial and
educational. Membership with the BNCC
is open for all companies and individuals
interested in activities of the BNCC and
to those aiming to develop their
professional network.
It would be a great pleasure for us to see
you at one of our events and have your
name associated with us in the promotion
of British-Norwegian trade. For more
information about the BNCC, forthcoming
events and application for membership,
please make contact with us.
By Daniel Middleton,
General Manager
British-Norwegian Chamber of
Commerce
www.bncc.no
daniel@bncc.no
+47 23 13 27 03
page iv
BNCC at the Queen's Birthday Party, hosted
by the British Embassy in Oslo
"From Crisis to Recovery" with DnB NOR
chief economist, Øystein Dørum
Ever since its launch in 1974, ONS in Stavanger has been one of the world s leading oil and energy industry meeting places. Our unique
total concept, embracing a biennial Exhibition, Conference, and an exciting cultural Festival, makes us one of the industry s key global
events.
ONS provides an arena for the presentation and high-level discussion of the political, economic and technological issues surrounding the
international oil and gas industry. In recent years, ONS has incorporated broader energy issues while maintaining its focus on the petroleum
industry. The ONS Foundation has overall responsibility for the ONS event, which aims to continue as a major international arena for the
promotion and advancement of the petroleum industry.
FACTS AND FIGURES ONS 2008
• 41 906 visitors
• 38 100 SQ.M exhibition area
• 1 217 exhibiting companies
• 28 exhibiting nations
• 1 100 conference delegates
• 96 participating nations
The Leading Energy Meeting Place
During the 35 years that it has been held in the
Norwegian city of Stavanger, ONS has become
one of the key events bringing major industry
movers and shakers together. From its earlier
focus on offshore technology and the Norwegian
continental shelf, the expo has now become a
meeting place for the global energy industry.
About the Exhibition
The exhibition is one of the world s leading energy
industry expositions. Whether you are an exhibitor or
a visitor, this expo provides you with direct access to
an offshore sector where investment worldwide is set
to reach record levels over the next few years.
Since 2004, the oil and gas industry s increasing
reliance on cutting-edge technology has received
particular focus at our dedicated Innovation Park,
which also serves to supplement our long-standing
innovation awards.
In 2008, we were proud to introduce a special
Renewable Energy Park. This will be expanded for
ONS 2010, underlining our focus on the entire energy
spectrum.
Stavanger
We are proud to invite you to the energy capital
of Norway. During its 40 years of involvement in
the international offshore business, Stavanger
has developed into an important centre for
petroleum-related research and technical
development. In combination with the
surrounding countryside, our culinary riches and
welcoming people, the scene is set for an energy
expo second to none.
ONS 2010 will continue the successful journey
that started with the first conference and
exhibition in 1974.
Do you want to be a part of it?
Norwegian oil and gas investment to hit a record high in 2011, UK business leaders have forecast a
booming year for companies involved in the Norwegian energy sector.
Research group Statistics Norway has revealed total investments in oil and gas activity in 2011, including
pipeline transportation, are estimated to be a staggering £15.5bn, the highest on record.
Norway will remain a reliable supplier of energy. We still have large unproduced resources on the
Norwegian Continental Shelf. Prime Minister - Jens Stoltenberg
1
The Norwegian Collaboration Centre (NCC) provides a conduit for commercial business (and a bit of culture) between Norway and the UK.
The NCC seeks to establish direct business links and cooperation between Norwegian and UK companies and organisations. Such
cooperation includes inward investment, joint ventures and trade.
The NCC has a strong 10-year relationship with the Norwegian business community and collaborates extensively with a number of
business and professional organisations, large international companies and government departments.
The NCC
The NCC's main goal is to develop inward
investment, joint ventures and trade between
Norway and the UK.
We are based in Newcastle, UK, with an office in
Aksdal, Haugesund, and we have been
operating since Jan 2000.
The NCC consists of a highly dedicated and
motivated team with many years of experience.
The NCC has developed a comprehensive
network throughout Norway and the UK so we
can find the right people in the right locations to
help you with your ambitions.
If you wish to explore the opportunities available
to you across the North Sea in either direction,
get in contact with us to see how we can help.
Norway2UK
Through the use of technology and 10 years of
international expertise the NCC has built up the
Norway2UK.com business portal to become a
respected gateway between Norway and the UK.
Norway2UK is used to support the efforts of the
NCC online. Norway2UK holds a community of
1000+ Norwegian and UK businesses. All companies
and organisations within ‘Norway’s Guide’ are also
presented online.
This online presentation provides instant, worldwide
access to your company in English and Norwegian.
In addition, Norway2UK has a monthly newsletter
distributed to 14,000+ business contacts. Your
online presentation will be promoted to this network
too!
Experience
UK
• One North East
• UKTI
• Eastern Airways Ltd
• NOF Energy
• NEPIC
• NAREC
• Exporters to Norway from the North-East
Norway
• Innovation Norway
• SIVA
• Haugaland Kraft ASA
• Seadrill ASA
• Norsk Hydro ASA
• IT Fornebu AS
• Inbusiness AS
The NCC is actively involved in seeking out growing opportunities in the Norwegian Continental Shelf and
new opportunities in the Barents Sea. With an exchange rate that has changed by 30% in Norway's favour
in three years, Norwegian companies are keen to trade with the UK.
If you are interested developing your
business in Norway, get in contact with
us:
+44 (0) 191 645 0232
+44 (0) 790 457 7840
info@norway2uk.com
PETRO media is a media company focusing on the Norwegian oil, energy and industry. We publish magazines PetroNews and Petro &
Industry, in addition to the news sites Petro.no and Oilinfo, our newsletter PetroNews Weekend, as well as job search site PETRO job.
PetroNews magazine has a circulation of 9,000 copies and distributed to managers and decision makers in the oil, gas and energy. We
also have a wide distribution at conferences and trade shows where our salesmen and journalists are actively present.
Petro & Industry magazine has a circulation of 57,000 and 55,000 of those going to fixed subscribers. The rest of the circulation handed
out at conferences and trade shows where we are participants.
PetroNews
‘Two of the best offshore magazines, AFX News
and Petro magazine, have teamed up to bring
PetroNews.
PetroNews magazine is distributed to 9,000
managers and decision makers in the oil,
gas and energy. PetroNews is also
distributed at all major conferences in
Norway.
PetroNews is written in Norwegian, with English
running summaries on the editorial pages, so
that foreign readers can catch the essence of
each item. An English version is released in
connection with ONS in Stavanger or Offshore
Europe in Aberdeen.
Each issue will in addition to articles on selected
topics include rich, fixed theme pages for
technology, new contract, the environment and
renewable energy, politics and news reviews.
Industry Energy Magazine
Industry Energy magazine is a journal focusing
on what's happening in the oil, energy, labour
and industry. The magazine is published five
times a year in Norwegian.
Industry Energy magazine is published to 55
500 of which 23 000 subscribers within the oil
industry and just under 30 000 in other
industries.
PETRO.no
PETRO.no delivers news about the petroleum and
energy industry. This site focuses on operating
companies and major supplier companies in
Norway's oil and gas industry.
PETRO.no aims to be the best at providing HSE and
oil industry conditions, and is partly behind a larger
database of adverse incidents on the Norwegian
continental shelf.
Oilinfo
Oilinfo is the website for the Norwegian supplier
industry. The site provides news about and for
the supplier industry, in addition to providing
important contract information and the latest
business and technology news.
PetroNord
Petronord covers the oil industry in North
Norway, the future's most important energy
region. Petro Northern Norway has a clear focus,
but also covers issues related to our neighbors
to the east and west, and takes both the field
developments, exploration, environment and
corporate news
PETROjobb
PETRO jobb is PETRO Media's job portal. Here
you can find exciting positions available from a
number of companies in the petroleum and
energy industries.
“Business is getting better in Norway and I believe it is good timing to speed up your business in Norway. As
I see, it more and more projects are coming out of the planning period and are being realised. Many
companies are now hiring. I'm not saying that everything is as it was, but there are many good prospects
coming up.
To introduce UK companies to the Norwegian market I believe you have to do different things. Online and
physical distribution is very important but meeting people, asking questions is the main thing and our
activity at conferences and exhibitions do just that!” Erling Holmefjord, MD, Petromedia AS.
PetroMedia AS
Lagårdsveien 77
4010 Stavanger
+44 51 84 36 36
www.petromedia.no
post@petromedia.no
MEMBER-TO-MEMBER BUSINESS
NOF Energy proactively encourages its
members to work together to gain greater
access to business opportunities in the oil,
gas, nuclear and offshore wind sectors.
Inter-trading and introductions within the
NOF Energy membership is important in
ensuring our companies continue to
collaborate and work together.
CONSULTANCY SERVICES
NOF Energy offer members the chance to
access a pool of specialist consultants to
assist you expand your sector and/or country
knowledge. This extends to undertaking
country research on your behalf.
Allow one of our highly qualified business
consultants to work with you in the UK or
internationally. At present we have
consultancy agreements in place for: Norway,
Brazil, Libya, Kazakhstan and the Gulf of
Mexico.
NETWORKING AND EVENTS
A comprehensive calendar of events to
facilitate introductions to key industry
movers and shakers, including:
networking lunches, themed seminars,
roundtable meetings, business advice
clinics, UK group visits, overseas market
visits, hosting of inward visits to the UK,
annual dinners and many more!
International companies unable to attend
can access presentations and contacts
from events at reduced rates.
INDUSTRY INTELLIGENCE
INTELL4ENERGY provides a monthly
update on projects, contract awards and
business opportunities. Plus the
opportunity to profile your company to
other members.
Also, access to preferential rates from
leading sector intelligence providers.
MARKETING AND MEDIA
Assistance to help you reach your target
market both in the UK and internationally.
Raise the profile of your company / brand to
become increasingly recognisable.
NOF Energy offers you sponsorship and
advertising (online and offline) opportunities
with the chance to add editorials to our in-
house magazine.
INTERNATIONAL BUSINESS SUPPORT
Assistance to trade internationally and
take part in overseas market visits.
Assistance also provided to international
members with support for visits to the UK.
Business support for the Oil, Gas, Nuclear and Offshore Wind Sectors
NOF Energy’s key business objective is to be recognised as the leading membership based business development organi-
sation for businesses involved in the oil, gas nuclear and offshore wind sectors.
Access to the UK Energy Market:
Overview of the UK oil, gas and offshore wind sectors; Introduction to the UK supply chain; Identification of potential part-
ners and agents in the UK; Provision of contacts in the UK, to include operators, contractor and major service companies;
Introductions to FPAL, Decom North Sea, Industry Technology Facilitator, Chambers of Commerce
Inward Investment Support:
Signposting to Government assistance for locating in the UK; Assistance to identify premises or manufacturing facilities
Find out how you can benefit from joining a proactive business development organisation for companies
involved in the oil, gas, nuclear and offshore wind sectors.
Simply get in touch with Joanne Leng, Director Business Development Manager at NOF Energy:
+44 (0) 191 384 6464 | jleng@nofenergy.co.uk | Visit: www.nofenergy.co.uk
Advanced Titanium Metals Ltd.
Unit 1 Bruce Works, Mowbray Street
Sheffield, S3 8EN
Tel: +44 (0) 114 2395771 • Fax: +44 (0) 114 2768596
Web: www.advancedtitaniummetals.com
Email: sales@advancedtitaniummetals.com
Contact: John Robinson
Advanced Titanium Metals Ltd was formed in 1998 and has worldwide expertise in metals and Titanium in particular, and now specialises in thesourcing, stocking and supply of Titanium products.
The Company now operates from three sites in the UK, and prides itself that it can deliver Titanium in any grade and in any form, from ingot tocustomer determined finished shape, through the Company's extensive knowledge and contacts with the best producers, converters and
Why Advanced Titanium?
Since its incorporation, Advanced Titanium Metals
has experienced increasingly rapid growth
throughout Europe and has gained a first class
reputation for its prompt and efficient service,
knowledge and awareness of the Titanium and Alloy
market and the high level of technical assistance that
we offer .We are often contacted by customers to
obtain metals of an obscure name or chemical
analysis.
Products and Services
We currently stock over $1 million of Titanium alloy
product including: Ingot, bar, plate, sheet and tube
and can provide black forgings or finished discs,
rings, flanges, weld necks, fittings, fasteners,
galvanic equipment and special parts on request.
We have access to a variety of Forges, from Open
Die, Closed Die, Drop Stamping or GFM Pressing all
with ISO and Aerospace approvals. This gives us
absolute flexibility and control when allocating Ingot
stock for further working, as we can decide which
company to use for the process route that gives the
best price, delivery and fit for purpose alloy product.
Advanced Titanium Metals is based on the "ethos" of
offering the rapid supply of a wide range of Titanium alloy
products at very competitive prices. This is only achieved
by the combination of the Ingot stock we hold allied to
the service provided by the local Forging industry.
Customers
Our customers include major UK and European
Stockists and Distributors and suppliers to the Oil,
Gas, Petro-Chemical, Power Generation, Nuclear,
Defence, Shipping, Marine and general engineering
industries.
Quality
Advanced Titanium Metals are committed to offering
the highest quality of alloy product from concept and
design to final black forged or finished machined
product.
Our rapid and competitive response to your
enquiries ensures that you remain one step ahead of
the rest.
We look forward to speaking with you whether for
commercial enquiries or technical advice on titanium
Absoft Ltd.
Davidson House, Campus 1, Aberdeen Science & Technology Park
Balgownie Road, Aberdeen, AB22 8GT
Tel: +44 (0) 1224 707088 • Fax: +44 (0) 1224 707099
Web: : www.absoft.co.uk/oilandgas • Email: info@absoft.co.uk
Contact: Tim Galloway
Absoft is the leading provider of SAP business solutions to the upstream oil and gas industry in the North Sea, offering a full range of serviceswhich address complex business challenges and drive business performance. Working directly with operators, oilfield services companies, andthe drilling and marine sectors, Absoft has extensive experience across the energy sector.
With 20 years’ oil and gas experience and implementations in over 25 countries, Absoft brings you unrivalled knowledge of global upstream oil
and gas business processes.
Why Absoft?
The Oil and Gas Expert - The company occupies a unique place in thehistory of the adaptation of SAP’s products for the oil and gas sector.During the pioneering implementation of R/3 Absoft’s founding directorsplayed a role in the specification of industry requirements for jointventure accounting and offshore logistics
A One Stop Shop - Provision of end- to-end SAP solutions and services,meaning you benefit from the economies of scale of managing only oneprovider.
The ONLY independent SAP-focused consultancy with productsdesigned specifically for the upstream oil and gas sector.
Through its process audit service, Absoft helps
companies that use SAP to get the most out of their
existing systems. This offers companies the
opportunity to benchmark themselves against their
upstream peers and take advantage of tried and
tested best practice business processes.
Absoft also leads the way in developing industry
solutions for upstream companies offering people-
based services, for whom the mantra “right person,
right place, right time - first time”, is a business
fundamental. For such companies, a single source of
information across projects, resources, finance and
manpower carries significant potential value, not
least in terms of efficient management of project
cost and scope and improved cash flow. Absoft
delivers this by combining workforce scheduling,
competency management, timewriting, payroll and
billing in one integrated system.
Absoft offers:
• Strategic advice
• SAP consultancy
• SAP implementation
• SAP process improvement
• SAP support
• SAP training
• SAP upgrades
• SAP licensing agreements
Advantage Oil & Gas
As an SAP partner, Absoft has designed SAP
Business All-in-One® solutions for the upstream
sector, with best practice and industry-specific
functionality built in.
This preconfigured, modular software allows
businesses to address their key challenges quickly
and cost-effectively and covers all major business
functions, including; Finance, Supply Chain,
Maintenance, Projects and Human Resources.
Customers can choose to implement what they need
now, knowing that they can extend the solution in
the future to meet new requirements, ensuring the
system changes to fit the business, rather than the
other way round.
SAP BusinessObjects
Absoft is also an SAP BusinessObjects partner. This
powerful range of Business Intelligence (BI) tools
gives your users - from the high-end analyst to the
casual business user- access to the information they
need when they need it, so they can make effective,
fact-based decisions for improved performance–
with minimal dependence on the IT department. It
does this by bringing together information from
the core business solutions within a company for
reporting, query and analysis, with the aid of user
friendly dashboards and visualisation tools.
Norwegian Customers
• Fred Olsen Energy
• Dolphin Drilling
• FMC Energy
Global Companies
• Total E&P(UK)
• Chevron Upstream Europe
• ConocoPhillips
• Apache Inc.
• Britannia Operator Limited
• Talisman
• Gulf Offshore
A&P Group Ltd.
Wagonway Road, Hebburn
Tyne & Wear, NE31 1SP
Tel: +44 (0) 191 4308100 • Fax: +44 (0) 191 4837196
Web: www.ap-group.co.uk • Email: neil.jarvis@ap-tyne.co.uk
Contact: Neil Jarvis
Originally founded as a centre of expertise in shipyard design and construction in 1971, A&P has developed into a leading force in shiprepair,conversion and marine services.
Today, we operate some of the world’s best equipped and most up to date shiprepair facilities and are widely recognised as a first port of call for
Blue Diamond Engineering Ltd.
Factory BT6/9, Dabble Duck Industrial Estate
Shildon, Durham, DL4 2QN
Tel: +44 (0) 1388 777921 • Fax: +44 (0) 1388 774557
Email: sales@blue-diamond.uk.com
Contact: Tim Barry
Founded in 1972 we have served many blue chip companies within the steel, oil & gas, yellow goods, aerospace, nuclear and railway sectors ofindustry. In addition to high quality CNC machining, we offer a fabrication facility for assemblies prior to machining.
By fulfilling our customer requirements regarding price, quality (BS EN ISO 9001:2000 accredited), and delivery we have established a reputationfor consistent commitment to our customers. Over the years we have secured a trusted and valued working relationship by our flexibility andwillingness to go that extra mile. This has resulted in us being the preferential supplier for many customers.
Why Blue Diamond?
Blue Diamond produce to the highest quality
We are able to deliever goods quickly to Norway
Our prices are very competitive for the quality work we produce
To ensure consistent machining quality and the long
term future of the company, investment in new plant
and equipment has been in excess of £700K over
the last five years. The vast majority of components
are programmed off line using the latest technology.
This allows us to offer a highly flexible and
responsive service, especially for urgent work. We
believe we have a lot to offer your company in these
very competitive and challenging times and would
welcome the opportunity to discuss your
equirements.
Capability
CNC Milling
� Soraluce TA-35A Bed Mill (3.5m x 1m x 0.8m)
� MTE BF4200 Bed Mill (4m x 1.2m x 1.5m)
� Victor V Centre 140 (1.4m x 0.7m x 0.7m)
� Hardinge VMC 1000 (1m x 0.5m x 0.5m)
� Hardinge VMC 1000 (1m x 0.5m x 0.5m)
� Anayak VH-2200 Bed Mill (2m x 0.8m x 0.9m)
CNC Turning
� Victor V Turn 46
� Yang ML-25A
CNC Horizontal Boring
� Union Heckert BFT110 (2m x 1.6m x 2m)
Conventional Machines
� DSG Lathe 1609
� DSG Lathe 25 (16’ between centres)
Fabrication Facilities are also available.
Global Customers
• FMC
• Balfour Beatty
• Caterpillar
• Pandrol
• Komatsu
• Corus
Costain Energy & Process
Costain House, Styal Road
Manchester, M22 5WN
Tel: +44 (0) 161 9103444 • Fax: +44 (0) 161 9103345
Web: www.costain-group.com/energyandprocess
Email: marketing@costain.com
Contact: Phil Emsley
Costain, the engineering and construction group, is one of the UK's top solutions providers, offering consultancy, construction and care acrossthe infrastructure, environment and energy industries. Costain Energy & Process, a division of the Costain Group, delivers innovative solutions forthe gas processing, nuclear and power industries.
Costain's expertise ranges from conceptual design through detailed engineering and procurement to construction and commissioning. Costainalso provides maintenance and turnaround management and is committed to ensuring the highest standards of safety, environmental protection
Why Costain?
Specialist engineering support services for cryogenic gas processing
Access to twin centres of execution for low cost high value alternative
Experience of working with Norwegian standards in oil and gas
Hydrocarbons & Chemicals
For over 60 years Costain has been designing and
constructing gas processing plants around the world.
From its roots in the petrochemical industry in the
mid twentieth century to recent developments such
as floating LNG, Costain has always been at the
leading edge of process technology. Costain also
offers a procurement capability which covers
purchasing, expediting, quality control, inspection
and shipping services.
Natural Gas Liquids
Costain has a long track record in the design and
supply of low temperature gas processing plants,
developing and optimising process designs to
ensure highly efficient use of available refrigeration,
offering outstanding liquids recovery whilst
minimising power consumption.
Underground Gas Storage
Costain Energy & Process has a wide experience of
gas storage projects in depleted fields and salt strata,
working with a number of European utility majors
involving brine & water and gas plant infrastructure
projects.
Costain Nitrogen Rejection
Costain has experience in design and supply of a
number of processing plants designed to remove
Nitrogen from natural gas using a variety of
processes selected to suit the particular nature of
the gas to be processed. Costain has designed the
World's two largest Nitrogen rejection plants.
Power
Costain is able to transfer engineering design,
construction and project management skills to
projects vital to the reduction of greenhouse gases,
including renewable power sources such as wind,
wave and biomass. A particular area of expertise is
carbon capture and storage; a vital part of the UK's
carbon reduction strategy.
Health & Safety
Health and safety is the number one priority at
Costain. The focus is on promoting a positive safety
culture, ensuring that employees, customers,
suppliers and the public are safe and
environmentally aware.
Norwegian customers we supply
• Aibel AS
• Kanfa Aragon
• Naturgass Vest AS
• Norsk Hydro
• Statoil
• Hoegh LNG
International Experience
• E.ON
• GDF SUEZ
• ENI
• Total
• ConocoPhillips
• RWE
• BHP Billiton
Cullum Detuners Ltd.
Adams Close, Heanor Gate Ind Est, Heanor
Derbyshire, DE75 7SW
Tel: +44 (0) 1773 717341 • Fax: +44 (0) 1773 760601
Web: www.cullum.co.uk • Email: noel.willows@cullum.co.uk
Contact: Noel Willows
Cullum Detuners Limited (CDL), specialists in the field of industrial environmental noise control solutions. Proud of our excellent history, we havebeen achieving excellence for over 60 years supplying to the aerospace, power generation and oil & gas industries. Specialising in the design,development, manufacturing and installation of jet engines test cell facilities and gas turbine acoustic packages, CDL are always looking at newways to offer the best service to our clients.
CDL is dedicated to reaching new heights using up to date technology and maximising on innovative ideas, we are simply leading the way by not
Darchem Ltd.
Stillington
Stockton-on-Tees, TS21 1LB
Tel: +44 (0) 1740 630461 • Fax: +44 (0) 1740 630529
Web: www.darchem.co.uk • Email: robert.pitman@esterline.com
Contact: Robert Pitman
Darchem has four business units, three of which provide engineered solutions to the high temperature problems of, primarily, the aerospaceindustry. The fourth provides fire protection and high temperature insulation solutions for the offshore and nuclear markets.
Darchem utilises computer aided design techniques and software, combined with on site fire testing facilities, and unrivalled expertise to provide
Dickinson Dees LLP
St Ann’s Wharf, 112 Quayside
Newcastle Upon Tyne, NE1 3DX
Tel: +44 (0) 844 9841500 • Fax: +44 (0) 844 9841501
Web: www.dickinson-dees.com
Email: simon.lewis@dickinson-dees.com
Contact: Simon Lewis
Dickinson Dees is a commercial law firm based in the north of England. We are a full service law firm with the largest, stand-alone corporatecompany and commercial practice in the region, and within that a wealth of resource, offering a wide range of specialisms.
Our expertise and experience covers everything from commercial agreements to tax and regulatory issues; from employment to planning; fromintellectual property rights to pensions. We offer access to specialists in Construction, Engineering, waste and waste to energy, renewables, IT & EBusiness and Property. We also have a dedicated Corporate Recovery & Insolvency practice. Unusually for a firm of our size, we have a significantPrivate Client Department, including a Financial Planning Group. This means we can provide services to individuals at senior management/ownerlevel within business as well as serving their commercial/corporate needs. We have many clients who operate internationally, so we are familiar
Why Dickinson Dees?
We can offer our full service from our offices in Newcastle, only anhour’s flight away
We also have offices in London and elsewhere in the country, enablingus to provide locally-based services nationwide.
Our network of international relationships with firms in other jurisdictionsgives an even greater depth of resource.
We can offer specialised expertise across many sectors, includingChemicals and Life sciences, Energy, Waste, and Transport, amongothers
We have assembled a team focused on delivering
our services effectively and efficiently to Norwegian
companies operating in the UK. The team includes
specialists in construction and engineering,
commercial and petrochemicals, property,
employment and tax, further details on each are
outlined below.
Construction
Our Construction team has considerable experience
in the building and engineering sectors, including oil
and gas and offshore wind technologies and related
supply chain work, covering all major forms of
standard contracts as well as bespoke project
agreements. We cover both transactional and
dispute resolution work for employers, contractors,
consultants and specialist contractors as well as
advising funders and public sector clients on a range
of issues relating to projects of all shapes and sizes,
both nationally and internationally.
Commercial
Our commercial services teams have a wealth of
experience in handling strategic transactions and
more general contractual issues in a variety of
sectors. We give advice and support to businesses
to allow them to operate within a practical and
commercial business framework. We draft contracts
for all commercial needs, our experience includes
advising upon, negotiating and drafting agreements
on outsourcing, product and services supply, capital
equipment sale and purchase, and design,
construction and operation of pilot plants for
manufacturing processes. We can also call upon the
extensive experience of our specialist intellectual
property team to advise on patent infringement
issues, trade mark management, licensing of
intellectual property, confidentiality and research
and development agreements.
Employment
For employment, we can guide Norwegian
companies through all of the UK legislative and
regulatory employment requirements including
providing contracts of employment, policies and
procedures. Alternatively, we can undertake audits of
current documentation to ensure that they are
compliant and fit for purpose. Norwegian companies
acquiring or investing in UK businesses will need
advice and support concerning the rights and
obligations of UK based employees which our
employment team is well placed to provide. In
addition, we can advise on employment issues
arising from employees based overseas, whether in
the UK or elsewhere.
Tax
The tax team can offer invaluable guidance on
navigating all aspects of the UK Tax system,
assisting with the management all of tax implications
for Norwegian companies looking to expand their
business over here. Whether looking to minimize tax
on business, corporate or property sales and
acquisitions, or restructure, finance or reorganize, we
can provide practical and appropriate solutions.
We’re also experts at steering our clients through the
minefield of the UK PAYE system and can even run a
UK payroll for them if necessary.
International Experience
• Procter and Gamble
• Nike
• Formica
• IBM
• SABIC
• Huntsman
• Nissan
DUCO Ltd.
Nelson Road, Walker Riverside,
Newcastle Upon Tyne, NE6 3NL
Tel: +44 (0) 191 2950303 • Fax: +44 (0) 191 295 0842
Web: www.technip.com • Email: sbd@ducoltd.com
Contact: Dave Clark
DUCO Ltd manufactures bespoke subsea umbilical systems for the oil and gas industry. In addition to umbilicals, DUCO Ltd also manufacturesand supplies an extensive range of subsea products and services including flying leads, high pressure hoses and end fittings, subsea and topsidehardware and offshore services.
DUCO Ltd has been supplying umbilicals worldwide for over 30 years and now supplies the largest range of umbilicals available on the marketincluding production control umbilicals, subsea pumping and processing umbilicals and gas lift umbilicals among others. DUCO Ltd is also thecentre of excellence for umbilical research and development in the Technip group and manages the development of umbilical systems worldwide,
DUCO Ltd manufactures the largest range of
umbilical systems available on the market today.
DUCO umbilicals can include any of the following
functional components:
• Steel Tubes – Super Duplex, Carbon Steel and
Nitronic 19D up to 50mm bore
• Thermoplastic Hoses – up to 50mm bore and
12,500psi DWP (bore size dependent)
• Electrical Cables – pair, triple and multi-core
constructions, with additional strain relief for
dynamic applications
• Power cores up to 400mm� conductor size and
30kV working voltage
• Optical Fibre cables – Single or multimode
fibres
with metallic tube protection and additional
strain relief for dynamic applications, up to 12
fibres as standard
DUCO Ltd’s main strength is our project
management and engineering capability. DUCO
assign an experienced project team to oversee each
project. A common project management model is
operated by each project team, including scheduling,
document control and quality. Our project teams
provide product expertise, experience and flexibility
to our clients ensuring that deliverables are on time
and within budget.
Norwegian Customers
• Skarv (BP)
• Snorre (Statoil)
• Glitne (Statoil)
• Alvheim (Marathon)
DUCO has also supplied umbilicals to Norwegian
clients for developments around the world including
Ceiba C5 development offshore Equatorial Guinea
and Azurite development offshore Congo for Framo.
DUCO also has a frame contract with Bennex
Omnitech AS in Kongsberg to supply high pressure
hose and end fittings.
DUCO’s clients include major oil and gas operators,
new independents, installation contractors,
engineering houses and controls systems suppliers.
Contracts awards in 2010 include the following
clients:
• Apache Energy
• BG
• BP
• FMC
• Technip
Why DUCO?
Project Range – DUCO umbilicals can
comprise of steel tube and/or thermoplastic
hose fluid conduits in addition to other
functional components. This is not available
from any umbilical manufacturer in Norway
and offers clients technical and/or commercial
benefits depending on the umbilical system
design.
Research and Development – DUCO Ltd has
over 60 personnel supporting its research and
development function, including a number of
recognised Technip experts. DUCO considers
R&D to be fundamental to its current and
future capabilities and is well positioned to
meet the industry’s future requirements.
Quality Management Systems – Quality,
Health, Safety and Environment are DUCO’s
number one priority and DUCO is committed
to ensuring the highest level of performance in
these areas. DUCO Ltd is has been awarded:
• ISO 9001:2000 – Quality Management
• ISO 14001:2004 – Environmental Management
• OHSAS 18001:1999 – Health and Safety
Carousel Armouring Machine Field layout including umbilicals
Eastern Airways
Schiphol House, Humberside Airport
Kirmington, North Lincolnshire, DN39 6YH
Switchboard: +44 (0) 1652 688886 • Fax: +44 (0) 1652 680899
Reservations: +44 (0) 1652 680600 • Fax: +44 (0) 1652 680909
Web: www.easternairways.com • Email: sales@easternairways.com
Contact: Eileen McBay
Eastern Airways operates daily scheduled services from Bergen and Stavanger to Aberdeen and Newcastle, allowing for convenient onwardconnections to seven UK destinations, including Birmingham, Cardiff, Durham Tees Valley, East Midlands, Humberside, Norwich and Wick.
We believe our success is built on our attention to detail, unique onboard service and we are also consistently rated one of the UK’s best on-time
Our first flights to Norway began back in 2007 with
our service between Aberdeen and Stavanger. This
was followed in 2008 with the introduction of our
Newcastle to Stavanger service. The North East of
England lost it’s long established ferry link to Bergen
when the service was withdrawn in September
2008. Eastern Airways stepped in to restore links
between the two cities with the start of flights from
Bergen to Newcastle in October 2009. Direct flights
between Aberdeen and Bergen were also introduced
at this time.
We very much look forward to welcoming you
onboard Eastern Airways in the near future.
Norwegian customers:
• Aker Solutions
• Acergy
• Statoil
Global customers:
• BP
• Shell
• Bristows
• Technip
• Transocean
• Subsea 7
Charter flights
Eastern Airways also offer charter flights
throughout Europe, our fleet includes:
• 29 seat Jetstream 41 turboprop
• 37 seat Embraer 135 jet
• 50 seat Saab 2000 turboprop
Flight Timetable
Aberdeen to Bergen
Mon – Fri 0840 – 1110
Sun 1500 – 1810
Aberdeen to Stavanger
Mon – Fri 0650 – 0900
Mon – Fri 1530 – 1740
Sun 1500 – 1710
Newcastle to Bergen
Mon – Fri 1030 – 1335
Newcastle to Stavanger
Mon – Fri 1000 – 1250
Bergen to Aberdeen
Mon – Fri 1440 – 1510
Sun 1840 – 1950
Stavanger to Aberdeen
Mon – Fri 0940 – 0950
Mon – Fri 1805 – 1815
Sun 1940 – 1950
Bergen to Newcastle
Mon – Fri 1430 – 1535
Stavanger to Newcastle
Mon – Fri 1320 – 1410
Why Eastern Airways?
Eastern Airways is committed to giving the best service to its Norwegianclients.
Eastern Airways offer 30 minute express check-in and there is no extracharge for checking-in, baggage, seating, fast track security* andexclusive business lounge**
Eastern Airways’ in-flight service is also complimentary offering hot andcold drinks, snacks and a bar.
*Available at Aberdeen, Birmingham, Cardiff, East Midlands, Newcastle and Southampton,
**Aberdeen
IHC Engineering Ltd.
Broomhaugh House, Riding Mill,
Northumberland, NE44 6EG,
Tel: +44 (0) 1434 682800 • Fax: +44 (0) 1434 682801
Web: www.engb.com • Email: ben.webster@engb.com
Contact: Ben Webster
IHC Engineering Business (EB) is a member of the Dutch group IHC Merwede which is a world market leader in the construction of specialistdredging equipment and complex custom-built offshore vessels.
EB designs, builds and supplies engineering solutions for the offshore oil and gas, submarine telecom, defence and renewables industries. In justover 12 years EB has grown from a start-up company to an employer of more than 180 people with an impressive order book for deliveries in the
Imtech Marine & Offshore Ltd.
9 Merchant Court, Koppers Way, Monkton Business Park South
Hebburn, Tyne & Wear, NE31 2EX
Tel: +44 (0) 191 4954130 • Fax: +44 (0) 191 237 7184
Web: www.imtech.eu/marine
Email: anthony.jones@imtechmarine.co.uk
Contact: Tony Jones
Imtech UK is a significant provider of technical services to the marine, telecoms, process, utilities and building services industries across the U.K.
Imtech Marine & Offshore offers innovative, high-quality technology for vessels and platforms. Operating not only within the UK but on a globalbasis they are very active in the entire maritime market; with experience ranging from passenger-, commercial-, naval ships, luxury yachts, river
Izumi Products UK Ltd.
Unit 4B Hatfield Way
Bishop Auckland Co Durham, DL14 6XF
Tel: +44 (0) 138 8777132 • Fax: +44 (0) 138 8777202
Web: www.izumi-products.co.uk • Email: jenny@izumi-products.co.uk
Contact: Jenny Williams
Izumi Products offers you the widest selection of high quality hydraulic compression, crimping and cutting tools, cable cutters and hydraulicpumps for the Transmission and Distribution, Telecoms and General Industrial Markets.
Izumi Products UK Ltd. was formed in 1995 by three electrical distribution engineers with over 120 years experience between them of working inthe electricity construction industry in the UK & South Africa. The Company is associated with the Izumi Products Company of Japan, as well as
Why Izumi?
Our Products are the of the highest quality.
The repair and servicing department have a maximum turn around
period of 2-3 days from order confirmation.
We are always keen to develop new tooling to suit customer
specification
We have experience in working across the world.
Products
Choose from over 100 models of Battery powered,
Remote operated and Manual hydraulic tools.
Including:
• Lithium Ion Tools
• New series tools
• Battery operated tools
• Crimping tools
• Hydraulic compression tools
• Hydraulic cutters
• Hydraulic pumps
• Hydraulic punches
• Hydraulic pipe benders
• Pressure test gauges
• Insulated tools
• Batteries and chargers
• Corded power tools
• Battery operated power tools
• Connectors
• Insulators
• Stringing equipment
• Hardware
• Dies
• Greener options
New Lithium Ion Tools
The LIC - series tools are ergonomically designed to
improve the balance of the tools allowing for easier
working in tight spaces and improved
maneuverability.
The New electronic circuit board with LED indicates
compression status and battery capacity. The LIC -
Series tool has new electronic memory function to
record repair history.
The new LIC - Series tools are environmentally
friendly and conform to the CE Regulations.
The Lithium Ion battery and charger is compatible
with all the LIC - series of tools.
Lithium Ion Battery provides more compressions and
cuts per battery charge
Norwegian Objective
We aim to create greater
awareness of our products
and provide the same quality
service to Norway that our
UK customers are
currently receiving.
J Newsome Tools Ltd.
Unit 1 Harleston Street
Sheffield, S4 7QB
Tel: +44 (0) 114 2757002 • Fax: +44 (0) 114 2797070
Web: www.newsometools.com • Email: martin@newsometools.com
Contact: Martin Newsome
Exporters, Importers and Distributors of Handtools and Consumables. With over 40 years of experience, Newsome Tools can offer friendly reliableservice along with over 1500 selected product lines. An excellent range of tools to suit the majority of today’s trade and DIY requirements.
Goods are supplied carded or loose to the customers own specification. Box deals are ideal for loose, value lines, while a range of steel
JWF Process Solutions
Belasis Business Centre, Belasis Hall Technology Park
Billingham, Teesside TS23 4EA
Tel: +44 (0) 1642 680020 • Fax: +44 (0)1709 839312
Web: www.jwfltd.com • Email: kenneth@jwfltd.com
Contact: Kenneth Fairbairn
JWF has been a prominent supplier of Instrumentation Solutions into all industry sectors for over five decades.
Our proven track record of engineering capability and customer service is backed by world class products. Based in the UK, with operational of-fices in Glasgow and Teesside, JWF has the expertise to handle any size of Instrumentation project from conception to delivery.
Our expert engineers have a wealth of industry and market knowledge with extensive applications experience and technical capabilities. Our TotalInstrument Solutions package is suitable for a wide variety of production processes.
Mech-Tool Engineering Ltd.
Mech-Tool House, Whessoe Road
Darlington, Co.Durham, DL3 0QT
Tel: +44 (0) 1325 355141 • Fax: +44 (0) 1325 487053
Web: www.mechtool.co.uk • Email: phil.dunn@mechtool.co.uk
Contact: Phil Dunn
Based in the North East of England and established in 1969, Mech-Tool Engineering (MTE) specialises in the provision of turnkey solutions to theoil, gas, petrochemical, nuclear, defence, energy and renewable markets. We provide a complete design, project management and supply servicecovering Acoustic Products, Modular Products, Fire & Blast Products and Thermal Insulation Products.
MTE employs a highly skilled, experienced team of designers, engineers, project and quality assurance personnel working within ISO 9001:2008
Why Mech-Tool?
Years of experience in supplying to Norwegian companies
Products extensivly supplied to Valhall Field
Completion of MAN Turbo Noise Control to BP’s North Sea platforms in
Norway’s Valhall Oil Field
Fire & Blast Products
MTE fire and blast protection product range includes
fire walls, blast walls, radiant heatshields, wind walls,
blast relief systems, fire and blast rated windows and
doors.
MTE fire and blast products are designed and
engineered to provide the most cost effective
solution whilst ensuring compliance with the client's
specification. MTE offers a variety of services
ranging from the total fire and blast protection
solution to survey and consultancy services.
Fire & Blastwalls
• Radiant Heatshields & Windwalls
• Blast Relief Systems
• SafeGuard Explosion Protection System
Modular Products
Mech-Tool’s Modules are purpose designed to meet
specified explosion, thermal, fire and acoustic
performance criteria and can be constructed from
carbon steel and/or stainless steel. Modules can be
manufactured and supplied fully packaged including
electrical, HVAC and architectural equipment, tested
and commissioned.
• Accommodation modules
• Switchgear and instrumentation modules
• Laboratory modules and control cabins
• Local equipment rooms and turret equipment
rooms
• Pre-assembled units (PAU)
• Firewater pump and generator enclosures
• Turbine and compressor enclosures
• Safe haven and overnight accommodation
shelters
• Telecommunication cabins
• Process and packaged equipment modules
Acoustic Products
MTE has within its core resource one of the most
experienced teams active in the Industrial Noise
Control Market.
• Total acoustic packages for power generation
and compression equipment
• Hot and cold exhaust systems for waste heat
recovery units (WHRU)
• Acoustic enclosures for rotating equipment
• HVAC silencers for industry
• Venting and blow off silencing systems for
steam
and various gases
• Acoustic mitigation services for existing
industrial
facilities and offshore locations
Facilities
MTE production facilities provide a large flexible unit
to cater for a wide variety of work. Use of a riverside
facility enables large, heavy structures to be
assembled and transported by sea to their final
location.
MTE has the capability and facilities to design, build
and load out modules exceeding 3000 tonnes.
Global Customers
• Aker Solutions
• AMEC
• ConocoPhillips
• Daewoo Shipbuilding
• Heerema
• Maersk
• Petrofac
• Shell UK
Why Newburgh?
70 plus years experience as a proven member
of Oil & Gas, Nuclear, Defence, Power
Generation supply chains.
Cellular manufacturing partnerships for the
production of key components under long
term agreements.
A large scale internal capability for the
production of high specification engineering
components and assemblies.
Full turnkey supply service through close
business links with a network of excellent local
material and process suppliers.
Products exported to global projects through
our international customer base.
Capability
• Contract Production
• Cellular Manufacturing Partnerships
• Project Management
• 40 Tonne Lift
• Milling To 22m X 1.5m X 1.3m
• 5 Sided Machining To 10m X 3m X 1.3m
• 5 Axis Machining To 2.4m X 1.2m X 1.3m
• Vertical Boring To Ø3.7m X 2.1m
• Horizontal Boring To 2.5m X 2.4m X 2.2m
• Full Range Of Contouring Heads
• Turning To Ø0.6m X 9m Long
• Fabrication
• Fronius Etr Weld Cladding
• Assembly And Test
• Pressure Test
• Shotblast
• Phosphate To Marine / Subsea Standards
• Industrial Painting To Marine / Subsea
Standards
• NDT – Dye Pen, Ultrasonic, Mpi, Brintronic
•
Newburgh Engineering Co. Ltd.
Bessemer Way, Rotherham
South Yorkshire, S60 1FB
Tel: +44 (0) 1709 724260 • Fax: +44 (0)1709 839312
Web: www.newburgh.co.uk • Email: sales@newburgh.co.uk
Contact: Matthew Jewitt
Founded in 1939 Newburgh Engineering is an ISO 9001, ISO 14001, Achilles UVDB, and "Investors in People" accredited contract manufacturer ofhigh specification engineered component parts and assemblies. Our service ranges from the production of low volume non repeating items, spe-cialpurpose equipment, and quick turnaround work, through to long-term partnerships for the supply of precision components and assemblies indedicated manufacturing cells. We have two excellent facilities located centrally in the UK, with a large manufacturing capability to lift 40 tonnes,mill to 22 metres, turn to Ø3.7 metres , fabricate, weld clad, assemble, test, paint, and carry out inspection and NDT activity.
Newcastle Chambers of Engineering Ltd.
Falstone House, 11 Rectory Road
Newcastle-upon-Tyne, NE3 1XR
Tel: +44 (0) 191 2854141
Web: www.ncoe.co.uk • Email: tom.kellacher@ncoe.co.uk
Contact: Tom Kellacher
Newcastle Chambers of Engineering is a consultancy of professional engineering practitioners providing a service of engineering studies, projectmanagement and engineering design. Our project activities cover new assets and modifications, providing project management from concept tocompletion mainly in the oil and gas and the petro-chemical process industries.
Newcastle Chambers of Engineering aims to be recognised as the first choice knowledge base consultancy for the services we provide. Tounderstand and exceed our client's needs for high quality, value for money, Professional services. To ensure that our Professional services are
Why NCoE?
Worked on many projects on the North Sea with Shell, BP, Exxon and
Phillips on both the UK Norwegian Continental Shelf.
Newcastle Chambers of Engineering has been a partner for projects and
process package management across the world including Nigeria, the
middle and the far east.
Based in the North East of the UK we have access to the most cost
effective and experienced supply chain in the world.
Newcastle Chambers of Engineering is a group of
engineers operating a community of practice. We are
professional engineers with a knowledge base and a
pragmatic approach that comes with experience.
Our Chambers of Engineering brings together
professional engineers with experience in their
particular disciplines and fields. The chambers
provide a unified approach, professional standards
and procedures, of a common community of
practice. Engineers give mutual support to each
other, sharing knowledge within the chambers and
with the clients.
Support is provided for plant and process operators,
project management, asset management, and
technical authorities. Studies are undertaken, and
assistance given with problem solving and safety
management.
We are a group with a core of principal engineers,
professionals with a core competence and many
years of engineering experience, onshore and
offshore, of project management and control
engineering. Each principal is a team leader.
The North East of England and Scotland is rich in
professional resources with experience in the
Norwegian upstream oil and gas industry. We work
as a team providing mutual support to each other, a
community of practice operating to ISO9001
procedures and common NCOE engineering
procedures.
Consultancy activities:
• Project management and change management
• Package specification and management
• Project definition and costing:
- Multi-engineering disciplines
- Control and safety systems
• Metering Studies
• HAZOPs, Risk assessments, etc.
• SIL assessments and analysis to IEC
61508/61511.
• Process Engineering
• Process control systems, package
management, and engineering:
- Process, Well-Head and Subsea controls
- Safety systems
- Compressors, Pumps, sub-sea wells. Etc.
• Long lead identification
• Construction and Commissioning guidelines
Noel Village
Carr Hill, Balby
Doncaster, DN4 8DE
Tel: +44 (0) 1302 768 000 • Fax: +44 (0) 1302 360 665
Web: www.noelvillage.com • Email: sales@noelvillage.com
Contact: David Lee
Noel Village - an independent UK foundry specialising in carbon, stainless and nickel based alloys for quality critical markets worldwide using thelatest methoding software and a comprehensive range of foundry skills.
A key aspect of the service is in assisting customers with their product design so that the design criteria can be met while improving castability,thereby minimising production costs. We pride ourselves on a strong technical capability covering casting design using solidification simulation
Why Noel Village?
Our versatility is demonstrated by the fact that we
can produce a range of products from intricate
components weighing less than 1kg to large castings
weighing more than 3,500kgs. These can be
manufactured in over 200 types of materials
including:
• Carbon steel
• Alloy steels
• Stainless steels - Duplex and Super Duplex
• Nickel based alloys - Inconel, Stellite & Monel
With closely controlled induction melting units from
100 kg to 3.75 tonnes, we have the capability to
meet requirements for one-off castings or high
repetition work. Through the use of computerised
design systems and the optimisation of production
routes, we are able to provide customers with a
highly efficient service, the best possible lead times
and competitive prices.
Capabilities
Noel Village has the capability to produce castings in
over 200 compositions of carbon, alloy & stainless
steels and nickel based alloys. The company
provides a complete range of foundry skills from
initial design through patternmaking, moulding,
casting, inspection to finishing and machining. One
of the major strengths is solidification simulation
using MagmaSoft and MagmaStress software
ensuring castings of the highest quality and integrity.
Quality Standards
Maintaining the highest quality standards is a pre-
requisite for the markets that we serve. All of our
operations are underpinned by the BS EN ISO 9001:
2008 Quality Assurance Standard. Beyond this, the
company has obtained the approval of various
statutory bodies as well as a broad range of
customers in quality critical markets.
Products
Our expertise in casting design combined with
versatile production facilities enables us to serve
most engineering sectors. Although we have earned
a reputation for the production of pumps and valves
in exotic materials, we have the skills and resources
to assist in the development of innovative products
across the spectrum of industry. The list below gives
examples of typical products.
Petrochemical and Oil & Gas
Valve components - bodies, bonnets and trim parts.
Pump casings, impellers and bearing housings.
Structural
Nodes and sockets for architectural projects.
Offshore and Marine
Mooring and anchorage system components.
Tunnelling and Mining
Various structural and wear resistant components.
Steelplant
Items for a wide variety of plant including
maintenance components as well a tailor-made
pieces like mill guides.
Osborne Engineering Ltd.
Atley Way, North Nelson Industrial Estate, Cramlington
Northumberland, NE23 1LL
Tel: +44 (0) 1670 737077 • Fax: +44 (0) 1670 736127
Web: www.osborne-engineering.com
Email: hassan.asheg@osborne-engineering.com
Contact: Hassan Asheg
Osborne Engineering Ltd (OEL) was founded in 1984, specialising in the manufacture and repair of all types of white metal components. OEL’sattention to detail and manufacturing excellence ensures exceptional quality and accuracy.
With facilities in UK, Poland, & UAE, OEL operates across five continents, working with Original Equipment Manufacturers (OEMs), Service
Palintest Ltd.
Palintest House, Kingsway, Team Valley,
Tyne & Wear, NE11 0NS
Tel: +44 (0) 191 4910808 • Fax: +44 (0) 191 482 5372
Web: www.palintest.com • Email: edward.mack@palintest.com
Contact: Edward Mack
Palintest is a world leader in water analysis technology. We design, manufacture and supply a full range of high performance products formonitoring water quality in a wide range of applications.
Palintest products are applicable in drinking water, waste water and swimming pool water testing applications, with a range of precisioninstruments and easy-to-use reagents developed specifically to meet these needs. We also supply products for the industrial and process water
Pipetawse Ltd.
Fabrication Division, Unit D4, New Hartley Drive, Double Row
Seaton Delaval, NE25 0PP
Tel: +44 (0) 191 2376237 • Fax: +44 (0) 191 2377184
Web: www.pipetawselimited.co.uk • Email:
ray.murray@pipetawse.com
Pipetawse Limited is a high quality pipework fabrication company operating in a modern well equipped 30,000 sq ft factory. We specialise in themanufacture and on-site installation of pipework for the offshore, oil and gas, petro-chemical, pharmaceutical, shipbuilding and energy-relatedindustries.
Why Pipetawes?
Pipetawse have endeavoured to support the industry through an active
apprenticeship scheme. We support 5 such apprentices to fill the skills
gap for future generations.
Alistair Brummitt, an apprentice at Pipetawse won ‘Britians Best Young
Welder.’ He now goes on to compete in the International Worldskills
Welding Competition in London in 2011.
Pipetawse want to use this investment in skills to provide a quality
service to the Norwegian Market.
Assembly
At Pipetawse, we believe that assembly and welding
are equally important. We always ensure that before
an operative begins work all necessary components
are identified and dimensions checked so that he
can concentrate on supplying the client with the right
pipework at the right price at the right time. It is our
objective to ensure that your component or
installation will be to your exacting specifications and
will be fabricated to meet the most demanding
schedules.
Welding
Our highly trained coded welder have the capacity to
work in all types of materials including most Carbon
Steels, Stainless Steel, Monel, Duplex, Super
Duplex, 6% Moly and Cupro-Nickel Alloys, using
qualified procedures and advanced techniques.
Careful monitoring and processing of materials is
paramount at our three-acre site, where we are
committed to a programme of regular investment to
ensure that the equipment we use can fulfil the
demanding requirements of our customers.
Material Control
Such is Pipetawse’s efficiency that the materials
required for a project can be quickly sourced from
our vast storage area. The size and layout of our
factory enables us to segregate the fabrication of
different types of material across three large
workshops. Computerised planning of projects and
the materials needed from them extends the pricing
and measurement of pipework as we constantly
seek to improve our performance and services.
On-Site Installation
Pipetawse’s expertise embraces the combination of
pipework fabrication with site services, including on-
site installation. We can confidently fulfil your
requirements for both large and small projects,
which are dealt with systematically and managed to
meet your budget criteria using our highly skilled
team of operatives.
Where required we will supply a project management
team, responsible for pipework and mechanical
installation to meet clients’ specified requirements.
Quality, Planning, Safety
A total commitment to quality is the bedrock of our
business and underpins our expansion. Since 1993
our in-house quality procedures and management
systems have been approved to BS EN ISO 9002.
The staff and workforce of the company know that
quality control must be paramount and built into
each project - from fabrication through to on-site
installation. This ensures that we have the capacity
to satisfy increasingly demanding customers’ needs.
At Pipetawse safety is one of our main watchwords.
Safety is of the utmost importance in the fabrication
workshop during welding and assembly and out
company safety policy extends to installations being
carried out on-site. Regular safety checks are
undertaken by the company’s management and a
highly qualified safety director, who liaises with the
management team who operate our safety
procedures.
Examples of some Shop Fabrication Projects
Client Project Material Man Hours
Phillips Ekofisk Duplex 70,000
Super Duplex
Agip Tiffany Kunifer 56,000
Encana Buzzard Super Duplex 100,000
Titanium
Carbon
Shell Shearwater Carbon Steel 125,000
Premier Hytemp Ltd.
Newbridge Industrial Estate, Newbridge,
Midlothian , EH28 8PJ
Tel: +44 (0) 131 3334140 • Fax: +44 (0) 131 3334727
Web: www.premierhytemp.com
Email: steve.mchugh@premierhytemp.com
Contact: Steve McHugh
remier Hytemp is the Edinburgh based division of The Murray Group, a world-leading engineered solution provider, stockist and supplier of lowalloy, stainless steel and nickel alloy forged bar, open die forged and closed die forged products for the Oil and Gas industry, heavy industry, shipbuilding, aerospace, nuclear and water processing industries.
Premier Hytemp is a recognized and approved global supplier to the major manufacturers in the oil and gas wellhead, down hole tools and well
R Blackett Charlton Ltd.
White Street, Walker
Newcastle upon Tyne, NE6 3PJ
Tel: +44 (0) 191 2622288 • Fax: +44 (0) 191 2344433
Web: www.rblackettcharlton.com
Email: tony.cutchie@rblackettcharlton.com
Contact: Tony Cutchie
Founded in 1885 R. Blackett Charlton established itself as a market leader in the pipework fabrication and erection field, servicing the shipbuildingand power sectors from its Tyneside base.
Over the years R.B.C. has built a reputation of Engineering Integrity as the United Kingdom's leading pipework fabrication specialist with a proven
Responsive Engineering Group Ltd.
Kingsway South, Gateshead
Tyne & Wear, NE11 0SH
Tel: +44 (0) 191 4973400 • Fax: +44 (0) 191 4973401
Web: www.responsive-engineering.com
Email: sales@responsive-engineering.com
Contact: Simon Worrall
The Responsive Engineering Group is based in the North East of England and has four manufacturing divisions that provide specialist sub-con-tract and contract manufacturing services to the Energy industry. The company has a history of progressive growth over 30 years and is nowrecognised as a leading provider of services to the Power Generation and Sub-Sea Oil & Gas sectors.
We are committed to Continuous Improvement and to achieving the highest of standards in terms of our service, product Quality and Delivery. Ourbusiness management systems are robust with effective measurement, control and reporting. We operate to BS EN ISO 9001:2008 as well as the
Why Responsive?
Single Point access to a broad range of Specialist Engineering Services
Extensive knowledge of the Power Generation and Sub-sea O&G
markets and their needs.
A forward thinking Group, committed to delighting customers through
performance excellence.
Core Process
Machining
• CNC Milling
• CNC Turning
• EDM (Wire & Sold Sink)
• Conventional Maching
Welding & Fabrication
• Specialist Welding
• Reclamation Welding
• High Integrity Fabrications
• Site Projects
• Super Duplex, Titanium, Aluminium etc.
Precision Cutting
• Laser 6kw 4m x 2m x 25mm
• Waterjet 4m x 2m x 150mm
Pressing & Forming
• Versatile Press range to 250 tonne
• Tool Room
• Assembly & Test
Suppoted by:
• Project Management
• Supply Chain Management
• Quality Management
• Welding Engineering
• Resource Engineering
Sub-sea Oil and Gas
• Intervention Equipment
• Drilling Equipment
• Artificial Lift Components
• Valves and Pumps
Power Generation
• Gas Turbine Assemblies
• Power Station Maintenance
• Nuclear Power Components
Clients Include
• Cameron
• Siemens
• Schumberger
• Sulzer
• Fugro
• Baker Hughes
• Flow Serve
S&C Electric Europe Ltd.
Princess House, Princess Way
Swansea, SA1 3LW
Tel: +44 (0) 1792 455070 • Fax: +44 (0) 1792 454768
Web: www.sandc.com • Email: sales.europe@sandc.com
Contact: Andrew Jones
S&C Electric Company is a global provider of equipment and services for electric power systems. Founded in 1911, the Chicago based companydesigns and manufactures switching and protection products for electric power transmission and distribution.
S&C's products help deliver electric power efficiently and reliably. Some are used to switch circuits. Others minimise damage to equipment in theevent of a fault or reduce the area of an outage by automatically rerouting power flow. And S&C's sophisticated power-quality products can de-
Why S&C?
S&C has proven field systems and operations for many years ranging
from desert conditions to the frozen climate of Northern Canada.
• SmartGrid Solutions
• Grid Connection
• Power Systems Studies
Global
S&C Electric Europe Ltd, a global leader in smart
grid is pleased to present its range of proven
solutions. The range of intelligent products range
from energy storage through to IntelliRupter Pulse
Closer and its IntelliTEAM automation software. S&C
offers a comprehensive range of analytical tools and
services that helps justify the benefits to your grid’
Renewable Energy
Electric utilities are increasingly tasked with meeting
Renewable Portfolio Standards, and are looking to
generate power from wind, solar, geothermal, and
biomass sources. But integrating the power from
renewable sources into the grid can be a daunting
challenge. S&C can help you meet this challenge.
S&C-designed collector systems maximize available
output from renewable energy sources. And S&C’s
energy storage solutions facilitate the dispatch of
these intermittent sources.
S&C offers complete solutions to resolve
interconnection challenges: From expert engineering
analyses . . . to field-proven products . . . to
complete Engineering, Procurement and
Construction (EPC) services. And we offer ongoing
maintenance too, ensuring continued reliable
operation of your renewable energy plant.
Smart Grid
Everybody’s talking about the Smart Grid of the
future. But there’s disagreement about what
it is and its value. Many so called “Smart Grid
technologies” haven’t been proven in the field.
Or they require extensive engineering by the end
user to the point these technologies aren’t
practical to implement or maintain. S&C has made
sense out of all the hype. We offer complete,
field proven Smart Grid Solutions that can help you
realise major goals for the Smart Grid today,
including:
• Self healing response to distribution system
problems such as faults, and voltage reductions or
losses.
• Power quality and reliability matching 21st
century needs.
• Integration of all generation and storage
options, including renewable energy sources a
critical need as utilities look to reduce their
dependence on carbon based generation sources.
• Asset optimisation and heightened efficiency
high priorities for utilities seeking to defer investment
in new infrastructure and reduce the costs of
equipment maintenance and problem
troubleshooting.
SBV Fabrication and Site Sevices Ltd.
Dormor Way, South Bank, Middlesbrough
Cleveland, TS6 6XH
Tel: +44 (0) 1642 253366 • Fax: +44 (0) 1642 254466
Web: www.sbvfabrications.co.uk
Email: david.geary@sbvfabrications.co.uk
Contact: David Geary
Since 1988 SBV has forged a name for quality work backed by an innovative and flexible approach to tackling projects for a growing list ofcustomers. From our Middlesbrough and Hartlepool sites in the North East of England, we have been serving a wide range of customers in thepower, nuclear, mining, steel, public infrastructure, re-cycling, process and high-end general industrial sectors.
Our expertise encompasses steel fabrication in carbon and fully segregated stainless, mechanical equipment packages, machining,
Why SBV?
Capability in complex projects for large and demanding customers
Broad and proven expertise across sectors
Progressive and forward thinking in meeting customer challenges
Our service includes
• Large fabrications in stainless and carbon steel
• Mechanical equipment packages
• Machining
• Manufacturing
• Assembly
• Fitting
• Erection
• Installation
• Commissioning
• Dismantling
• Refurbishment
• Site services
Our sites
We undertake fully segregated stainless steel and
carbon steel fabrication at our Middlesbrough facility,
which is on a 2.4 acre site and has a 23,000 sq ft,
18m height fabrication facility and large lay-down
area. With a lifting capacity of 2 x 15t and 1 x 30t we
can handle large and complex fabrications. Our
Hartlepool facility has a further 50,000 sq. ft. for
machining and fabrication operations.
Our project management
We have the project management capability to
undertake turnkey projects, from in-house fabrication
programmes to operating as Principal Contractor
under CDM regulations. Our extensive experience
covers a broad range of sectors and applications.
You can call on our expertise in the management of
design, preparation of programmes, site
management of installations and commissioning,
and safety critical lifting requirements.
Our site dismantling and erection
Away from our easily-accessed Teesside sites, we
are often asked to undertake fabrication projects at
our customers’ sites. We can take on site erection of
structural steelwork, as well as site dismantling prior
to the installation of new or refurbished fabrications.
The complete service covers mechanical, structural
and environmental assessment of installations and
equipment. We’ll always provide recommendations
and planning for their safe removal.
Our commitment to Health and Safety
Health and Safety has the highest priority at SBV.
We routinely undertake projects where the quality of
our fabrication and its installation is safety critical.
We work with demanding customers on high risk
projects and sites where there is no margin for error.
We understand this.
We use the Safety Passport, ACE and CSCS
systems of safe working accreditation and are highly
experienced in risk assessment and safe working
methods for all of our activities - whether on-site or
off-site. Since 1998 we’ve been a BS EN
ISO9001:2008 approved company.
Senergy Econnect
Stockbridge House, Trinity Gardens, Quayside
Newcastle upon Tyne, NE1 2HJ
Tel: +44 (0) 191 2387300 • Fax: +44 (0) 191 2387399
Web: www.senergyworld.com • Email: jon.monk@senergyworld.com
Contact: Jon Monk
Senergy delivers innovative consultancy and operational solutions to more than 100 clients across the evolving energy sector from locationsthroughout the world. At the core of our success are Senergy people; technical experts across a wide range of related disciplines. The breadthand depth of this resource means that we can provide a fully integrated approach to the most diverse client needs.
The rigorous application of our quality policy ensures healthy working relationships and consistent results. We are highly conscious of our reputa-
Why Senergy?
We deliver an integrated resource for the oil and gas
industry with the expertise and flexibility to meet
every need from reservoir evaluation through to full
field development and well performance
management.
Exploration, Appraisal, Development &
Management
Our large group of geologists has extensive
exploration and field development experience,
making us one of the foremost exploration and field
management service groups in the world.
• Geology
• Geophysics
• Petrophysics
• Res Eng
• RSC
• Well Eng
• Wellbore Performance
• ADT
• Prod Tech
• Formation Integrity
Software Products
• ODM3 (Oilfield Data Manager)
• IP (Interactive Petrophysics)
• Eikos
Reserves & Asset Evaluation
Senergy provides technical and commercial
assessments of individual assets, portfolios and
companies that are confidential, accurate and
consistent.
• Acquisitions & divestments
• Commercial negotiations
• CPR
• Exploration & Asset evaluations
• Company valuations
• Strategic planning
• Reserve reporting
Well Delivery Services
Senergy procures and manages drilling rigs in the
North Sea. This allows ‘first time’ operators to
outsource their entire drilling and rig management
needs to Senergy. We manage welldelivery with a full
life cycle approach and offer full services on all
aspects of well construction.
• Wellshare
• Market understanding
• Schedule consolidation
• Slot management
• Peak loading capability
• Rig/client contractual arrangements
Alternative Energy
Carbon Capture and Storage
Senergy Alternative Energy is a leading consultancy
in the carbon storage industry. Our expertise ranges
from basin screening, site selection and
development through to storage site operation and
storage monitoring, measurement and verification.
Wind Power
Senergy’s goal is to provide clients with a full set of
integrated, project development services. We
manage wind farm assets from cradle to grave to
maximize returns on your investments. Our support
helps you to:
Find the best prospects for development, on or
offshore;
Conduct early feasibility studies and secure planning
consents and the necessary grid connections;
Execute the project and commission the wind plant;
Manage ongoing operations and maintenance.
Grid Connection
Senergy Econnect specialises in the grid connection
of renewable energy. Senergy Econnect has
developed innovative solutions in transmission
networks, distribution networks and system
Sonart Electronics Ltd.
Units M&N, Pitreavie Crescent, Pitreavie Business Park
Dunfermline, Fife, KY11 8UT
Tel: +44 (0) 1383 624846 • Fax: +44 (0) 1383 625004
Web: www.sonart.co.uk • Email: sales@sonart.co.uk
Contact: Alistar Williamson
Sonart is a Scottish company based in the city of Dunfermline in Fife. Its capabilities range from PCB layout and design, to hand placement,surface mount and conventional assembly. Sonart offers a comprehensive range of services from cable harness to prototyping, surface mountand test to complete box build.
We will work in partnership with you to deliver the best Quality, Delivery and Price to meet your demands and exceed your expectations fromconcept to completion. We believe in building relationships with our customers to achieve mutually beneficial goals and long term successful
Why Sonart?
Fast Response & Turnaround
Low to Medium Volume
Quality in Design and Manufacture
Sonart offers value in terms of Quality,
Delivery and Price to meet and exceed its
client / partner expectations.
Surface Mount
Using the DIMA Hybrid Pick and Place machine we
are capable of placing virtually any SM component,
from CHIP, MELF, SOT, SOIC, TSOP, TNT, PLCC,
QFD, BGA, MicroBGA, LCC and down as far as 0402.
From the placement of components on single or
multi-layer circuit boards to flexible and flexi-rigid
boards Sonart will deliver a professional service at
an affordable price.
PCB Assembly
Our highly skilled workforce is dedicated to
producing first class manufacturing of your products.
Our range stretches from one off prototypes to a full
box-build service with the same high standard and
attention to detail given to every project we
undertake.
Cable Harness / Wiring
A wide range of cable assemblies can be
manufactured, from simple single wire earth straps
and ribbon cables to complex multiple wire formed
cables.
Box Build
Our complete product manufacturing service allows
our customers to see us as an extension of our
customer's shop floors. We can:
• Source and assemble printed circuit boards
• Procure metal work cable and wiring
• Complete product manufacture
• Test, label, box and ship direct to your
customer
Prototypes
Sonart can produce small volume or prototypes
using SM and / or Conventional builds. These small
batches are normally hand assembled by our
experienced operators, with leaded or lead free
capability available.
Producing prototypes and small volume by hand
assembly allows us to give you a fast turnaround,
high quality service, reducing the costs of tooling
and set-up.
PCB Layout
Using VUTRAX® layout software, we can provide our
customers with a full design layout service.
Utilising the design software we are able to offer
customers the following:
• Layout of Single/Double and Multilayer pcb
designs.
• Layout of Flexible Circuits.
• Design for manufacture.
• Circuit Diagram generation.
• Drawing package and BOM preparation.
• Reverse engineer of customer information.
• Modification to customer gerber information.
Stellex Ltd.
Hadston Industrial Estate, Hadston
Morpeth, Northumberland, NE65 9YG
Tel: +44 (0) 1670 760082 • Fax: +44 (0) 1670 761404
Web: www.stellex.co.uk • Email: sales@stellex.co.uk
Contact: Peter Harding
Stellex Ltd manufacture an extensive range of products for use in the catering industry. From the simplest of tables for food preparation throughto bespoke servery counters we have everything to meet your requirements.
We specialise in offering a comprehensive design, manufacture and install service for large or small projects. Our products are used across thecountry in offices, schools, industiral installations and many other applications. Over the years we have established an enviable reputation for
Why Stellex?
Established in 1937 Stellex Limited combines a long
standing tradition in catering equipment, with
modern manufacturing techniques, always
incorporating good design, high quality materials,
modern technology and a multi-skilled dedicated
workforce.
Stellex have been manufacturing stainless steel
catering equipment for over 70 years and, from our
base in Northumberland, we pride ourselves on
providing quality equipment and service at very
reasonable prices. Our product range extends from
standard tabling, benches, sinks etc. to modular and
bespoke servery counters. The same attention to
detail is guaranteed whether you are looking for a
single unit or a complete refit.
Products
• Fabrication
• Metal Distrubution
• Servery Counters
• Ancilliary Items
Service and Design
Our free advisory and planning service equipped
with the latest AutoCAD computer design technology
is at your disposal at any time. We welcome all
enquiries to discuss specific requirements and your
local sales representative will be only too happy to
meet you to discuss these requirements in detail.
Stellex undertake all or any stage of a project from
design and build, project management, site
clearance, M&E services, through to installation,
commissioning and staff training - all with the
minimum of disruption.
In addition to our own comprehensive range of
stainless steel equipment, Stellex is also a major
distributor of leading manufacturers' equipment,
ensuring the provision of a one-stop purchasing
forum for all our clients.
Thermal Resource Management Ltd.
Temperature House, 21 Sedling Road, Wear East Industrial Estate
Washington, Tyne and Wear, NE38 9BZ
Tel: +44 (0) 191 4168884
Web: www.temperature-house.com • Email: ddooley@trmltd.co.uk
Contact: Doug Dooley
The TRM (Thermal Resources Management Ltd) Group of Companies are the World's largest manufacturers of Mineral Insulated heating,thermoelectric & fireproof wiring cables, along with CSA / ATEX approved Heating Elements and Temperature Measurement probes andassemblies.
Our workforce comprises of former BICC Senior Managers and technicians, offering a wealth of experience in cable making and temperature
Vanguard Foundry Ltd.
Bott Lane, Lye, Stourbridge
West Midlands, DY9 7AW
Tel: +44 (0) 1384 422557 • Fax: +44 (0) 1384 423338
Web: www.vanguardfoundry.co.uk
Email: psmith@vanguardfoundry.co.uk
Contact: Pete Smith
Established in 1983, Vanguard Foundry Ltd is a privately owned company specialising in the manufacture of Iron castings for the turbo-charging,diesel engine, agricultural & general engineering sector. Approved to ISO 9001-2000, we produce the entire Ductile Iron range including Simo, Ni-resist & ADI materials.
We are proud of our reputation for high quality service which has been recognised by many leading manufacturers including Cummins Engine
Why Vanguard?
The patterns for the production of prototypes can be easily modified
during development and then used for series production saving time to
market and cost.
With both high pressure greensand and resin bonded moulding systems
Vanguard offers flexibilty and versatility that is rare in a modern foundry.
Vanguard's versatility extends to the range of cast-irons in regular
production. We offer grey (flake graphite) irons at one end of the
spectrum to the full range of ductile irons at the other which include Ni-
Technical Services & Specifications
Facilities now available within the foundry have been
bolstered by additional CAD and solidification
modelling software. Vanguard Foundry can now
receive CAD data from engineers, model the
founding characteristics and agree necessary
modifications to designs before customers waste
time and money on equipment only to find
modifications are required at a later date.
This facility will enable customers to get product to
market faster and with confidence of a right first time
approach.
Material Specifications
Many custormers ask for castings to be produced to
their own material specification and Vanguard has
the flexibility to cope with this demand. For other
customers Vanguard produce castings that meet
international standards for specifications for ductile
iron to EN 1563 1997.
Special Cast Irons
Special cast irons covers a multitude of materials but
high silicon-molybdenum and austempered ductile
irons are two in regular production at Vanguard
Foundry Ltd. High silicon-molybdenum irons were
developed to meet the increasing demand for high
strength ductile irons capable of operating at high
temperatures. This material ideally suited
applications such as manifolds and turbocharger
housings where strength, oxidation resistance,
structural stability and resistance to thermal cycling
are key to performance. Austempered ductile iron
was developed to provide a cost effective material
with high strength but more importantly excellent
wear resistance. The combination of strength and
resistance to abrasion whilst retaining some ductility
make it an ideal material for agriculture, construction,
mining, gears, and many other diverse applications.
Austenitic Cast Irons
Austenitic irons have greater resistance to heat and
corrosion when compared to standard grades. Other
properties include thermal expansion, magnetic
permeability, impact value at low temperatures and
erosion resistance will vary with the grade of
austenitic iron. Vanguard foundry has both the
expertise and the experience to successfully
produce these technically demanding materials.
Casting Production
With its emphasis on service and flexibility Vanguard
Foundry Ltd offers two distinctly different moulding
systems to its customers, a high pressure green
sand moulding line and a chemically bonded boxless
moulding system. The green sand system, based on
the Heinrich Wagner Sinto (HWS) moulding machine,
is ideally suited to the smaller product with repeating
or high volume demand. The chemically bonded
system with its variable mould size can cater for
much larger castings and also suits the low volume
items which repeat rarely if ever. Both systems give
good dimensional stability and repeatability.
Quality
We are committed to ISO 9001-2000 as the
minimum standard on which to base a programme of
continuous improvement. This will ensure we provide
first class products which adhere to our customer's
quality & technical specifications.
VCL
5 Kelvin Park South, Kelvin Industrial Estate, East Kilbride
Glasgow, G75 0RH
Tel: +44 (0) 1355 263884 • Fax: +44 (0) 1355 245146
Web: www.vcl.uk.com • Email: ray.wilkey@vcl.uk.com
Contact: Ray Wilkey
With over 20 years of experience producing high quality, high precision engineered products, we have the knowledge and expertise to take yourprojects to a new level. Very simply, we can help you achieve more.
Since 1987, we have brought together project management, innovation and value engineering to become a world class supplier of turnkeyengineering solutions. We have unrivalled knowledge of the latest production techniques, and work in a wide range of materials - which means we
Wessington Cryogenics Ltd.
2 Gadwall Road, Rainton Bridge South
Houghton le Spring, Tyne & Wear,DH4 5NL
Tel: +44 (0) 191 5120677 • Fax: +44 (0) 191 5120745
Web: www.wessingtoncryogenics.co.uk
Email: martinwoodhouse@wessingtoncryogenics.com
Contact: Martin Woodhouse
Wessington Cryogenics is a manufacturer of a broad range of cryogenic storage vessels from small general purpose dewars to multi-codedvessels, bespoke road tankers, custom build trailers and 10ft & 20ft ISO framed tanks for the global Oil & Gas Industry.
In 2009 Wessington Cryogenics celebrated its 25th year and during the last 15 years has become recognised amongst the best in the world forquality and reliability, vessel design and manufacture. In addition to this, Wessington Cryogenics is able to offer a full tank and framerefurbishment program and re-certification service at its UK factory. Wessington can also offer a vessel repair and testing service (on-site) and is
Expertise
Wessington has proven technical expertise and
design capability to build to all current international
standards including: ADR & RID (Transport), PED &
TPED, DNV 2.7.1 (Offshore), EN 12079/13530, CSC,
IMDG (Container Transport and Maritime), Worksafe
Approval (Australia), GOST R (Russia), ASME VIII &
US DOT (Transport America). Wessington
Cryogenics is also the preferred supplier to many of
the major organizations in the Oil & Gas Industry
including the international Oilfield Service
Companies and cryogenic Tank Rental & Leasing
Companies. Many of these companies placing
repeat orders for 10ft and 20ft ISO containers – year
after year, for delivery into some of the most hostile
environments
all over the world.
Products
• 10ft ISO framed units
• 20ft ISO framed units
• Dual Certified ISO units
• Cryogenic road tankers
• Custom build trailers
• Ambient vaporisers
The majority of our 10ft and 20ft offshore tanks are
being used in coiled tubing, nitrogen pumping and
well intervention services by most of the major
international operators
Investment
Wessington has made substantial investment in
production, training, and the implementation of lean
manufacturing techniques in the last two years and
in 2010 moved into a new 70,000 square ft
production facility with even greater production
capacity for the 10ft offshore tank. This new facility
gives us an additional 30,000 square ft (production
capacity) allowing the company to take on large
scale manufacturing projects and custom designed
cryogenic vessels and trailers. The company remains
a family run business with the directors having a
combined experience of more than 75 years in
cryogenic engineering & manufacturing and with
more than 80% of the company’s annual total
production, being exported globally.
Awards
In 2008 and 2009 Wessington Cryogenics was
recognized for outstanding achievement by a panel
of industry leading experts and awarded Company of
the Year, International Business of the Year and
Exporter of the Year by respected independent
organizations in the UK. This success has come from
continued growth with global partners within the Well
Service Industry. .
Internatonal
Wessington Cryogenics is an international company,
but remains strongly committed to its traditional
manufacturing routes in the North East of England
and is passionate about the quality of its people, its
strong business performance, and cryogenic vessel
manufacturing expertise.
Why Wessington Cryogenics?
Norwegian experience: IKM Testing AS, BJ PPS, Halliburton Norway
Global experience: Argon Isotank, IKM, Hydra Rig, OHS, Weatherford
Local manufacturing base
Custom built ISO tanks & trailers
Specialist service & support
White Bros Ltd.
Gosforth Industrial Estate
Newcastle-upon-Tyne, NE3 1XD
Tel: +44 (0) 191 2130455 • Fax: +44 (0) 191 2841351
Web: www.whitebros.co.uk • Email: peter.harding@whitebros.co.uk
Contact: Peter Harding
White Bros Ltd are manufacturers of quality stainless steel fabrications and providers of site servicing, pipework, coded welding and metrologyservices. For over 125 years we have been developing the skills and experience to provide exceptional quality and service. We believe that at ourbest nobody can match us.
Our customers are commonly within the oil and gas, food and pharmaceutical industries but our capabilities are suited to a broad range of
Why White Bros?
Capability
We have benefited greatly over the years from a high
level of investment in new facilities, which include:
• Well organised premises with 17,500sq. ft of
space, sufficient for larger fabrications.
• Overhead craneage up to 5 tonne capacity
• Radan CAD/CAM
• Autocad
• Amada Apelio combined laser cutter/punch
• 4 metre Promecam 8 axis press brake (220
tonne capacity)
• Plasma cutter with 4m x 2m bed capable of
cutting
• 12mm stainless
• 80 tonne capacity Promecam press brake Octo
8
station Amada punch press
• Mechanical sheet handling
• Extensive MIG and TIG facilities
• Dedicated stainless steel polishing facilities
(both
mirror and brush finish)
• State of the art polishing machinery
• Extensive stocks of pre-polished sheet, 304 and
316 quality-satin and mirror polish
Coded Welding Approvals
• EN ISO 15614-1 Welding Procedures
• EN 287 Pt.1 Welders Qualifications
• ASME IX Welding Procedures and Welders
Qualifications
Bespoke Fabrication
With our range of skills and facilities to produce
bespoke stainless steel fabrications we can produce
probably anything you can imagine being made from
stainless steel, including:
• Architectural
• Conveyors
• Duct Work
• Hoppers and Chutes
• Isolators and Gloveboxes
• Platforms
• Sculpturals
• Furniture
• Vessels
Pipework
We can supply process design fabrication and
installation of process pipework systems supported
by a qualified team. Typical projects would be
processes incorporating CIP, process routing
pipework, steam, glycol.
• Coded Pipework
• Hygienic Pipework
• Utility Pipework
• Mechanical Pipework
Site Servicing
We employ and maintain well-equipped site
installation teams which enable us to offer on-site
design, production of engineering drawings for
customer approval, workshop fabrication, through to
site installation for all manner of stainless steel sheet
metalwork, fabrication and process pipework.
We carry out installation, maintenance, repairs and
welding, planned or at short notice, using permanent
customer site facilities or on an ad-hoc basis for
existing and new customers. Our very flexible work
force allows us to work weekends, shut-downs and
shift changes to suit your requirements and
demands.
Liquisafe
Liquisafe is a revolutionary product which provides a
means for safe transfer of hazardous liquids. The
Liquisafe unit is suspended above a drum and by
using a retractable dip pipe the liquid is extracted or
injected while fumes are safely drawn off through a
sealed extraction pipe.
Liquisafe solves your problems by virtually
eliminating contact with hazardous chemicals during
W.J. Hunter Ltd.
Union Road, Tanners Bank
North Shields, Tyne & Wear NE30 1HR
Tel: +44 (0) 191 2570491 • Fax: +44 (0) 191 2962663
Email: nigel.wjhunter@btconnect,com
Contact: Nigel Hunter
W.J. Hunter & Co. is precision engineering company based in Tyne & Wear with over 40 years experience. We focus on all customer requirementswhether supplying multiple batch work or single component manufacture.
We operate to ISO 9001/2000 standard with full traceability on all services. Material test certification and certificates of conformity supplied.
Why W.J. Hunter?
Machine Qty Description Swing over
Bed
Swing over
Saddle
Dia. X Y Z
CNC Milling
HURCO HAWK 40/SSM 1 3-axis CNC Milling
Machine
3D Moulding
- 1016 508 508
Manual Milling
TURRET MILLING MACHINES
GRAFFENSTADEN
2
1
Turret Mill with DRO
UNIVERSAL MILLING
MACHINE
-
-
860
1200
300
450
380
750
CNC Lathe
HURCO TM10H 1 Turning Centre 450 402 - - - 714
Manual Turning
HARRISON M390 LATHE
HARRISON V390 LATHE
HARRISON M460 LATHE
HARRISON M550 LATHE
1
1
1
1
Centre Lathes Fitted
with DRO
400
400
460
554
246
246
270
370
-
-
-
-
-
-
-
-
-
-
-
-
1500
1500
2000
2000
Drilling
RADIAL ARM DRILLING
MACHINE Wm. ASQUITH
1 1200 - - 1000
Ancillaries
EXCEL SAW KP320 1 Horiaontal Hacksaw 13” - - -
Inspecting Full in house Insoection
Index by Product/Service Categories
PRODUCTS/EQUIPMENT/ MATERIALS
Drilling Equipment
Material and Product Handling Equipment
Compressors/Expanders/Blowers and Accessories
Pumps and Accessories
Drivers and Accessories
Heaters/Furnaces/Boilers etc
Heat Exchangers/Heat Transfer Equipment
Tanks/Vessels/Columns etc.
Electrical Equipment and Materials
Instrumentation/Communication and Process Control
Equipment/Materials
Miscellaneous Mechanical Equipment
Cooling/Heating/Ventilation/Air Conditioning Equipment
Marine/Diving and Pipeline Equipment
Computer and Communication Equipment
Safety/Protection/Security/Firefighting Equipment
Environmental Equipment/Products
Packages - Construction/Outfitting
Service Station Equipment/Materials/Products
Material for the Production of Aluminium and Aluminium Products
Pipes/Tubes/Hoses and Fittings
Valves and Accessories
Steel/Metal Materials
Non-Metal Materials (Plastics, Composites, etc.)
Automobiles and Associated Equipment
Downstream Packing Materials
Chemicals/Oils/Paints
Insulation/Refractory Materials
Civil Bulk Materials
Architectural/Building Materials
Workshop and Handtools
Office Admin. Products and Consumables
Raw Materials for the Production of Anodes and Aluminium
Other Products/Equipment and Materials
SERVICES
Engineering Services
Consultancy Services
Research & Development Services (R&D)
Exploration and Production Drilling Services
Construction/Modification/Repair/Maintenance/Refurbishment
Services
Installation Services/Marine Contracting
Inspection/Control and Testing Services
Transportation/Supply/Disposal Services
Surveying/Positioning Services
Seismic Services
Information Systems/Information Technology/Communication
Services
Petroleum Technology Services
Certification and Integrity Services
Financial and Insurance Services
Decommissioning and Abandonment Services
Service Station Maintenance/Services
Services Required for the Production of Aluminium and Aluminium
Products
Exchange and Throughput Services
Other Supporting Services
MULTI DISCIPLINE/COMBINED SUPPLIES AND/OR
SERVICES
Engineering/Procurement
Engineering/Procurement/ Construction
Engineering/Procurement/ Construction/Installation
Engineering/Procurement/ Construction/Installation/
Commissioning
Integrated Services
ROGALAND RESSURSSENTER - A VALUABLE RESOURCE FOR
ENTREPRENEURS AND EXISTING BUSINESS
Rogaland Ressurssenter (RRS) is a business development company in the
Haugesund region which offers help and guidance to foreign SMEs who wish
to develop or establish their business in Norway. We can provide you with
access to office space as well as our in-house services, assistance in
organising meetings, access to a wide range of networks, information on local
industry and the services available.
Through our network, and by agreements we have with both Karmøy
Kommune and Siva, we help innovative companies to access markets,
strategic partners and venture capital. We also provide project management
services for both the private and public sectors with particular expertise in the
following areas; industrial development, renewable energy, aquaculture and
Objective:
Facilitate / develop a power center establishment of future-
• Energy Flexibility
• Gas as a raw material
• Petroleum-related indus-
tries
• Renewable Energy
- Solar Power
- BioEnergy
• Aluminium related industry
• Offshore / Maritime
• Mechanical industry / service
• CO2 management
Excellent port facilities
• Deepwater quays
• Long quay
• Good fairway
• HNP with over 160 quayside loca-
Expertise
• R & D
• Process Industrial Management and Operations
• Offshore, maritime, and process industry expertise
• Wide energy-related expertise
Nordvegen Utvikling is a collaboration between Haugaland Kraft and Hydro on the
development of Haugaland Industrial Park and Karmøy Industrial Park.
Haugaland Kraft and Hydro Aluminium established a common project for development of
the two industrial parks. We aim to develop the Region of Haugesund into an “industrial
growth region” in Norway.
Helge Grini Johansen, +47 52 70 70 65, hgj@nordvegen-utvikling.no, hgj@nordvegen-utvikling.no, www.nordvegen-utvikling.no
The Haugesund region between Bergen and Stavanger is open for business.
We can cater from the very largest to the smallest company in Nordvegen
top related