new products booklet 2017-2018 - flowtechnology uk...couplings malleable iron stainless steel...
Post on 21-Dec-2020
1 Views
Preview:
TRANSCRIPT
New Products Booklet 2017-2018
Page numbers are indicated.
1
Tech Sheet 60137
Stopflex
Retention System for Pressure Hoses
To suit DIN & BSP Fittings
0466
STOPFUDIN145 8L - 1/4” 14.5 300 16.05STOPFUDIN17 8S - 10L - 3/8” 17 300 16.05STOPFUDIN185 10S - 12L 18.5 300 16.05STOPFUDIN205 12S 20.5 300 16.05STOPFUDIN225 14S - 15L - 1/2” 22.5 300 16.30STOPFUDIN245 16S - 5/8” 24.5 300 19.45STOPFUDIN265 18L - 3/4” 26.5 300 16.30STOPFUDIN305 20S - 22L 30.5 300 16.80STOPFUDIN34 1” 34 450 18.00STOPFUDIN365 25S - 28L 36.5 450 18.00
Hose Band
0466
STOPFA11115 11 11.5 M6 5.05STOPFA12125 12 12.5 M6 5.05STOPFA13135 13 13.5 M6 5.05STOPFA1415 14 15 M6 5.05STOPFA1617 16 17 M6 5.05STOPFA1718 17 18 M6 5.05STOPFA1819 18 19 M6 5.05STOPFA2021 20 21 M6 5.05STOPFA2122 21 22 M6 5.05STOPFA2223 22 23 M6 5.05STOPFA2425 24 25 M6 5.25STOPFA2526 25 26 M6 5.25STOPFA2627 26 27 M6 5.25
1 H
ydra
ulic
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
See page 57 for full page
Hose Burst GuardOur highest performance sleeve, designed to control and dissipate fluids from dangerous hose bursts.For use in line-of-sight applications, to help protect personnel and equipment from the effects of a hose failure.
Maximum Burst Control Pressure:890 bar
Tech Sheet 60335
30 Metre Coils
0460
BUSLEEVE-31 31 305.35BUSLEEVE-36 36 323.20BUSLEEVE-42 42 347.90BUSLEEVE-46 46 370.95BUSLEEVE-54 54 429.85
10 Metre Coils
0460
BUSLEEVE-31-10 31 111.95BUSLEEVE-36-10 36 118.50BUSLEEVE-42-10 42 127.55BUSLEEVE-46-10 46 136.00BUSLEEVE-54-10 54 157.60
Hose Wrap SleeveIdeal for hose bundling, adding abrasion protection post assembly or replacing damaged existing sleeves. Tech Sheet
60336
45 Metre Coils
0460
WRSLEEVE-25 25 764.65WRSLEEVE-75 75 1325.75WRSLEEVE-100 100 1764.05WRSLEEVE-125 125 1836.60WRSLEEVE-150 150 1952.15WRSLEEVE-175 175 2519.00WRSLEEVE-200 200 2971.30
• Quick assembly• Lightweight• Proprietary bonding process allows
cutting without fraying• Meets ISO 6945 abrasion standard• Excellent UV resistance
• Velcro fastening with shear strength of 22 psi
• Maximum temperature without degradation: +225ºC
• MSHA approved IC171/1• Outer layer withstands a minimum
350,000 cycles, abrasion tested using ISO 6945 test method
• Controls bursts up to 13,000 psi• Two-layer structure with inner yellow
layer acting as an abrasion indicator• Meets ISO 3457, 4413, 6945, 6805,
EN 414, MDG 41 and MSHA IC171/2
• Excellent resistance to UV ageing• 40 metre lengths available on request• Melting point: +215ºC
See page 59Protective Hose Sleeves
2
See page 155 for full pageHose & Pipe Cleaning Kits
Pellet Launcher kitsThe mobile kit is specifically for use with hose, tube and pipe from 5mm to 50mm. The hose nozzle fits over the tube, hose or pipe to be cleaned.The specially designed and extremely robust pellet launcher controls the air flow. It attaches to a 50mm crimp head through a patented interlocking system. The nozzles are inserted into the head. These are designed to reduce the pellet in size for insertion into the pipe.All nozzles fit into the 50mm crimp head. All kits come in a case with instruction manuals and a pellet usage chart for identifying the correct pellets to use with your application.
This kit consist of the following:• AM-1™ hand piece• 50mm crimp head• Adapter ring• White hose nozzles:
6, 8, 10, 13, 16, 19, 25, 32, 38 and 50mm
Tech Sheet 60438
Mobile Kit
0489
MOBI-KIT 1/4” 10 x Hose Nozzles 6mm to 50mm 800.00
Pellets used in the system will travel through 90 degree angles, tee joints, coils, U tubes, bore and straight-through valves.The specially designed and extremely robust pellet launcher controls the air flow. It attaches to the 32mm and 50mm heads through a patented interlocking system. The nozzles are inserted into the head. These are designed to reduce the pellet in size for insertion into the pipe.All nozzles fit into either the 32mm or 50mm heads. All kits come in a case with instruction manuals and a pellet usage chart for identifying the correct pellets to use with your application.
This kit consist of the following:• AM-1™ hand piece • 32mm and 50mm heads• White hose nozzles:
6, 8, 10, 13, 16, 19, 25, 32, 38 and 50mm
• Green tube and JIC nozzles: 5, 6, 8, 10, 13, 16, 19, 22, 25, 32, 38 and 50mm
• Blue BSP nozzles: 6, 10, 13, 16, 19, 25 and 32mm
Tech Sheet 60439
Full Kit
0489
FULL-KIT 1/4” 31 x Hose Nozzles 6mm to 50mm 900.00
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
1 H
ydra
ulic
s
3
Triple-Lok Tube Fittings
Page Tech Sheet 60429
Tube Nuts & Sleeves
Nut
0486
4BMTXS 6 1/4” 0.605BMTXS 8 5/16” 0.806BMTXS 10 3/8” 0.958BMTXS 12 1/2” 0.8510BMTXS 14,15,16 5/8” 1.6512BMTXS 18, 20 3/4” 3.0016BMTXS 25 1” 4.9020BMTXS 28,30,32 1.1/4” 13.1524BMTXS 35,38 1.1/2” 16.30
Metric Sleeve
0486
TXS6 6 0.55TXS8 8 0.60TXS10 10 0.55TXS12 12 0.55TXS14 14 3.35TXS15 15 1.10TXS16 16 0.85TXS18 18 3.40TXS20 20 1.10TXS25 25 2.90TXS30 30 5.90TXS32 32 7.45TXS38 38 9.95
Straight Union
Tube x Tube
0486
4HTXS 6 1/4” 6.955HMTXS 8 5/16” 6.506HMTXS 10 3/8” 9.708HMTXS 12 1/2” 6.9510HMTXS 14,15,16 5/8” 7.0512HMTXS 18, 20 3/4” 10.6516HMTXS 25 1” 16.7520HMTXS 28,30,32 1.1/4” 34.1024HMTXS 35,38 1.1/2” 45.40
ED Seal, BSPP
0486
4F42EDMXS 6 1/4” 1/8” 6.454-4F42EDMXS 6 1/4” 1/4” 5.754-6F42EDMXS 6 1/4” 3/8” 9.004-8F42EDMXS 6 1/4” 1/2” 14.105-4F42EDMXS 8 5/16” 1/4” 6.056-2F42EDMXS 10 3/8” 1/8” 7.956F42EDMXS 10 3/8” 1/4” 5.506-6F42EDMXS 10 3/8” 3/8” 6.356-8F42EDMXS 10 3/8” 1/2” 8.558-4F42EDMXS 12 1/2” 1/4” 8.108F42EDMXS 12 1/2” 3/8” 6.458-8F42EDMXS 12 1/2” 1/2” 8.108-12F42EDMXS 12 1/2” 3/4” 14.7010-6F42EDMXS 14,15,16 5/8” 3/8” 7.8510F42EDMXS 14,15,16 5/8” 1/2” 8.2512-8F42EDMXS 18,20 3/4” 1/2” 15.2512F42EDMXS 18,20 3/4” 3/4” 12.7012-16F42EDMXS 18,20 3/4” 1” 19.6516-12F42EDMXS 25 1” 3/4” 14.0016F42EDMXS 25 1” 1” 16.4020-16F42EDMXS 28,30,32 1.1/4” 1” 31.7020F42EDMXS 28,30,32 1.1/4” 1.1/4” 35.1024F42EDMXS 35,38 1.1/2” 1.1/2” 68.10
O-Ring + Retaining Ring (ISO 1179), BSPP
0486
4C4OMXS 6 1/4” 1/8” 13.104-4C4OMXS 6 1/4” 1/4” 12.255-4C4OMXS 8 5/16” 1/4” 12.356C4OMXS 10 3/8” 1/4” 11.656-6C4OMXS 10 3/8” 3/8” 13.606-8C4OMXS 10 3/8” 1/2” 20.358-4C4OMXS 12 1/2” 1/4” 15.858C4OMXS 12 1/2” 3/8” 13.458-8C4OMXS 12 1/2” 1/2” 17.758-12C4OMXS 12 1/2” 3/4” 32.0010-6C4OMXS 14,15,16 5/8” 3/8” 18.0510C4OMXS 14,15,16 5/8” 1/2” 17.4012-8C4OMXS 18,20 3/4” 1/2” 23.0012C4OMXS 18,20 3/4” 3/4” 25.4012-16C4OMXS 18,20 3/4” 1” 37.6016-12C4OMXS 25 1” 3/4” 38.0516C4OMXS 25 1” 1” 37.2020-16C4OMXS 28,30,32 1.1/4” 1” 67.6520C4OMXS 28,30,32 1.1/4” 1.1/4” 68.8524C4OMXS 35,38 1.1/2” 1.1/2” 89.80
Male Stud 90° Elbow
Male Stud Coupling Swivel Male x Female Stud Coupling
ED Seal, BSPP
0486
4F642EDMXS 6 1/4” 1/8” 15.054-4F642EDMXS 6 1/4” 1/4” 11.655-4F642EDMXS 8 5/16” 1/4” 12.056F642EDMXS 10 3/8” 1/4” 8.956-6F642EDMXS 10 3/8” 3/8” 11.708-4F642EDMXS 12 1/2” 1/4” 15.008F642EDMXS 12 1/2” 3/8” 10.808-8F642EDMXS 12 1/2” 1/2” 13.9010-6F642EDMXS 14,15,16 5/8” 3/8” 14.4010F642EDMXS 14,15,16 5/8” 1/2” 12.5012-8F642EDMXS 18,20 3/4” 1/2” 17.0012F642EDMXS 18,20 3/4” 3/4” 17.5016-12F642EDMXS 25 1” 3/4” 29.0516F642EDMXS 25 1” 1” 25.55
See pages 226-231 for full range
1 H
ydra
ulic
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
4
Hydraulic Hand Pumps
AccessoriesSpecification:• Black hand grip• White zinc-plated steel lever
Operating Lever
0462
HHP-OL HHP Series 900 7.95
Closed centre option available.
3 Way Flow Diverter Valves
0462
HHPDV-06 3/8” Open Centre 350 60 22.40HHPDV-08 1/2” Open Centre 350 90 25.55HHPDV-12 3/4” Open Centre 350 120 30.05
Normally open, two position with mechanical control for tipping trucks.Specification:• Cast iron body• Piston treated with niploy• White zinc plated external parts
Maximum Working Pressure:250 bar
End Stroke Valves
0462
HESV-06 3/8” 60 59.20HESV-08 1/2” 80 59.20
Steel TanksSpecification:• Suction pipe included• Breather Cap 1/4” BSP• Release Cap 1/4” BSP• Standard Colour Black
Tech Sheet 60151
Steel Oil Tanks for Hand Pumps
0462
HHPT-01 1 Litre 1/4” 33.40HHPT-02 2 Litre 1/4” 35.30HHPT-03 3 Litre 1/4” 39.60HHPT-05 5 Litre 1/4” 48.20HHPT-07 7 Litre 1/4” 57.30
Tech Sheet 60152
Tech Sheet 60153
Tech Sheet 60154
PumpsSpecification:• Cast iron body• White zinc-plated support lever• Lever connection OD: 27mm• White zinc-plated external parts
Maximum Working Pressure:350 bar
Double Acting Pump with Release Knob, Side Mount
0462
HHP-01 20 1/2” 350 Wall Mount Single Acting Cylinder 85.90
Double acting hand pump for single acting cylinder.Specification:• Cast iron body• Piston treated with niploy• White zinc-plated support lever• Lever connection OD: 27mm• White zinc-plated external parts• Oil tank mounting kit included• Pressure relief valve (standard setting):
100 bar
Double Acting Pump with Release Knob & Pressure Relief Valve
0462
HHP-03 25 3/8” 350 Tank Mount Single Acting Cylinder 95.95
Maximum Working Pressure:350 bar
Tech Sheet 60145
Tech Sheet 60147
See pages 253-254 for full range
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
1 H
ydra
ulic
s
5
Hydraulic Control Valves
Monoblock Valves
Type P40, 4 Way, 3 Position , Spring Return, 40 l/min, BSPP
0479
1021-0001 3/8” 1/2” 1 P40 A1 GKZ1 65.201021-0002 3/8” 1/2” 2 02P40 1A1 GKZ1 104.351021-0003 3/8” 1/2” 3 03P40 1A1 GKZ1 143.451021-0004 3/8” 1/2” 4 04P40 1A1 GKZ1 174.801021-0005 3/8” 1/2” 5 05P40 1A1 GKZ1 226.951021-0006 3/8” 1/2” 6 06P40 1A1 GKZ1 253.051021-0007 3/8” 1/2” 7 07P40 1A1 GKZ1 307.80
Type P80, 4 Way, 3 Position, Spring Return, 80 l/min, BSPP
0479
1021-0008 1/2” 3/4” 1 P80 A1GKZ1 109.551021-0009 1/2” 3/4” 2 2P80 1A1GKZ1 164.351021-0010 1/2” 3/4” 3 3P80 1A1GKZ1 226.951021-0011 1/2” 3/4” 4 4P80 1A1GKZ1 255.651021-0012 1/2” 3/4” 5 5P80 1A1GKZ1 354.801021-0013 1/2” 3/4” 6 6P80 1A1GKZ1 409.55
Type P120, 4 Way, 3 Position, Spring Return, 120 l/min, BSPP
0479
1021-0014 1” 1” 1 P120 A1GKZ1 232.151021-0015 1” 1” 2 02P120 A1GKZ1 336.501021-0016 1” 1” 3 03P120 A1GKZ1 440.851021-0017 1” 1” 4 04P120 A1GKZ1 513.90
Type S290, 4 Way, 3 Position, Spring Return, 110 l/min, BSPP
0479
1021-0018 3/4” 1” 1 S291/AS 357.401021-0019 3/4” 1” 2 S292/AS 466.951021-0020 3/4” 1” 3 S293/AS 613.051021-0021 3/4” 1” 4 S294/AS 730.451021-0022 3/4” 1” 6 S296/AS 1035.65
Type P81 Log Splitter Valve
0479
1021-0023 1/2” P81 A2 G 104.35
Type P81RS Rapid Log Splitter Valve
0479
1021-0038 1/2” 3/4” P81 RS G 143.45
Type ZC70, 4 Way, 3 Position, Spring Return, 70 l/min, BSPP
0479
1021-0024 1/2” 3/4” 1 ZC70 N/PA1/T/G 182.601021-0025 1/2” 3/4” 2 2ZC70 N/PA1/T/G 297.401021-0026 1/2” 3/4” 3 3ZC70 N/PA1/T/G 388.701021-0027 1/2” 3/4” 4 4ZC70 N/PA1/T/G 495.651021-0028 1/2” 3/4” 5 5ZC70 N/PA1/T/G 607.801021-0029 1/2” 3/4” 6 6ZC70 N/PA1/T/G 725.201021-0030 1/2” 3/4” 7 7ZC70 N/PA1/T/G 866.101021-0031 1/2” 3/4” 8 8ZC70 N/PA1/T/G 1001.75
Type ZC100, 4 Way, 3 Position, Spring Return, 100 l/min, BSPP
0479
1021-0032 1/2” 3/4” 1 ZC70 N/PA1/T/G1 206.101021-0033 1/2” 3/4” 2 2ZC70 N/PA1/T/G1 323.451021-0034 1/2” 3/4” 3 3ZC70 N/PA1/T/G1 474.801021-0035 1/2” 3/4” 4 4ZC70 N/PA1/T/G1 589.551021-0036 1/2” 3/4” 5 5ZC70 N/PA1/T/G1 759.151021-0037 1/2” 3/4” 6 6ZC70 N/PA1/T/G1 871.30
See pages 258-261 for full range
1 H
ydra
ulic
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
6
Spill Absorbents
Absorbent Dispensing StationsIdeal for day-to-day housekeeping or responding to minor spills, these polyethylene cabinets are specifically designed for dispensing absorbents. Accepts rolls up to 550mm diameter x 520mm wide.Weight: 20kg.Absorbents not included.
Open Front Absorbent Centre, Polyethylene
0480
POLY-STATION 64cm x 58cm x 118cm 330.75
Floor standing with single roll holder and workstation cabinet. Welded together to provide a safe and secure fixing.Weight: 29kg.Absorbents not included.
Combined Absorbent Centre, Steel
0480
WSHOP-STATION 66cm x 42cm x 150.5cm 355.00
Twin wall mounted absorbent roll holders.Weight: 10.5kg.Absorbents not included.
Wall Mountable Twin Roll Holder, Steel
0480
WALL-STATION 66cm x 42cm x 89cm 206.25
See page 301
Hydraulic Contamination Control
In-line Contamination Monitor
Tech Sheet 60435
ICM - In-line Contamination Control Monitor
0302
ICMWMKRG1 M12 x 2 9-36V DC 20-400 >2.2W Mineral Oil 4412.93ICM0NKRG1 M12 x 2 9-36V DC 20-400 >2.2W Subseas Fluids 3745.95
Screen and multicolour indicators
See page 315
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
1 H
ydra
ulic
s
7
Hydraulic Oil Coolers
AC Range Air Blast Oil CoolersThe LAC air oil cooler, with single-phase or three-phase AC motor, is optimised for use in the industrial sector. The maximum cooling capacity is 300kW at ETD +40ºC. See Tech Sheet for full specification on this model.
Maximum Static Working Pressure:21 barMaximum Dynamic Working Pressure:14 bar
Tech Sheet 60442
BSPP
0488
KW/ºC
LAC-1 1/2” 230/1/50 0.05 388.85LAC-2 1” 230/3/50 - 275/3/60 0.23 759.20LAC-3 1” 230/3/50 - 275/3/60 0.36 888.80LAC-4 1” 230/3/50 - 275/3/60 0.59 1041.55LAC-5 1” 230/3/50 - 275/3/60 0.78 1300.80LAC-6 1.1/4” 230/3/50 1.75 2235.90LAC-7 1.1/4” 230/3/50 2.1 4633.85
DC Range Air Blast Oil CoolersThe LDC air oil cooler with 24V DC motor is optimised for use in the mobile industry.Together with a wide range of accessories, the LDC cooler is suitable for installation in most applications and environments.The maximum cooling capacity is 30kW at +ETD 40ºC.Also available with a 12V DC motor. See Tech Sheet for full specification on this model.
Maximum Static Working Pressure:21 barMaximum Dynamic Working Pressure:14 bar
Tech Sheet 60443
BSPP
0488
KW/ºC
LDC-1 1” 24V 0.12 405.05LDC-2 1” 24V 0.19 540.05LDC-3 1” 24V 0.3 646.15LDC-4 1” 24V 0.38 723.30LDC-5 1” 24V 0.6 1094.60LDC-6 1.1/4” 24V 0.72 1374.30
Offline Air Blast Oil CoolersThe LOC cooling system with three-phase AC motor is optimised for use in the industrial sector.The system is supplied ready for installation. An integrated circulation pump makes it possible to cool and treat the oil in a separate circuit (offline cooling).See Tech Sheet for full specification on this model.
Tech Sheet 60444
BSPP
0488
KW/ºC
LOC-1 1” 230/3/50 - 275/3/60 0.07 1148.05LOC-2 1” 230/3/50 - 275/3/60 0.2 1504.50LOC-3 1” 230/3/50 - 275/3/60 0.26 1523.00LOC-4 1” 230/3/50 - 275/3/60 0.45 1768.35LOC-5 1” 230/3/50 - 275/3/60 0.61 2249.80LOC-6 1.1/4” 230/3/50 1 3004.35
Hydraulic Motor In-line CoolersThe LHC air oil cooler with hydraulic motor is optimised for use in the mobile and industrial sectors. The maximum cooling capacity is 300kW at ETD +40ºC.See Tech Sheet for full specification on this model.
Maximum Working Temperature: +120°C
Maximum Static Working Pressure:21 barMaximum Dynamic Working Pressure:14 bar
Tech Sheet 60445
BSPP
0488
KW/ºC
LHC-1 1” 8.4cc 0.22 877.60LHC-2 1” 14.4cc 0.38 1015.40LHC-3 1” 10.8cc 0.58 1083.60LHC-4 1” 10.8cc 0.76 1194.50LHC-5 1.1/4” 10.8cc 1.1 1908.15LHC-6 1.1/4” 8.4cc 1.3 2059.05
Maximum Working Temperature: +120°C
Maximum Static Working Pressure:21 barMaximum Dynamic Working Pressure:14 bar
Maximum Working Temperature: +100°C
Maximum Working Temperature: +120°C
See page 305
1 H
ydra
ulic
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
8
Hydraulic Tooling & Lifting Equipment
Pumps• Metal reservoirs resist cracking• Built-in bypass device protects the hydraulic system from over-pumping
damage (US Patent No. 5,946,912)• Compact yet powerful air turbo motor (US Patent No. 5,341,723)• Suggested air inlet range: 110-175 psi (7.6-12.1 bar)
Air Pump, Single Acting
0481
OilCapacity
Litres
PA1500 3/8” 346.4 Aluminium 643.20
• Metal reservoirs resist cracking• Internal pressure relief valve for overload protection• Perfect for use with cylinders and hydraulic tools or OEM applications• Two-speed pumps reduce user fatigue and increase productivity
Single Speed Hand Pump, Single Acting
0481
OilCapacity
cm3
P601S 3/8” 600 Steel 384.00
Page Tech Sheet 60403
Cylinders
Cylinder Kits
50 Ton Flat Body Cylinder Kit, Single Acting
0481
HF5006B 16 67 83 1432.00
Adaptor sizes: 10, 20 and 40mm.
15 Ton General Purpose, Single Acting
0481
H1501 25 124 149 504.00H1502 51 149 200 568.00H1504 101 200 301 616.00H1506 152 270 422 680.00H1508 203 321 524 760.00H1510 245 372 626 840.00H1512 305 423 728 936.00H1514 356 474 830 1065.60
Accessories• Rubber bend restrictors• High working pressure• Optimum flexibility• Lightweight
Working Temperature:-40°C to +100°C
Maximum Working Pressure:700 bar
Maximum Working Pressure:700 bar
Hose Assembly, Male NPT
0481
CS3814-1 3/8” 1 60.80CS3814-2 3/8” 2 92.80CS3814-3 3/8” 3 124.80CS3814-4 3/8” 4 156.80CS3814-6 3/8” 6 204.80
Toe Jacks• Low height• Heat-treated and chrome-plated medium
carbon steel cylinder• Chrome-plated plunger improves seal life and
optimises performance• By-pass device protects hydraulic system from
over-travel damage (US Patented)• Hydraulic system is protected from internal
damage by a patented by-pass mechanism (US Patent No. 5946912)
Manual
0481
J13060 130 15 147 672.00J13120 130 23 152 768.00J13200 130 28 160 1020.00J13300 130 28 168 1752.00
See page 346-349 for full range
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
1 H
ydra
ulic
s
9
054 Series
Couplings
Male Thread, BSPT
0493
054CVMT14BNN 1/4” 59 17.20054CVMT38BNN 3/8” 60 17.20054CVMT12BNN 1/2” 54 20.45
Female Thread, BSPP
0493
054CVFP14BNN 1/4” 54 16.65054CVFP38BNN 3/8” 54 18.05054CVFP12BNN 1/2” 56 20.45
Hose Tail
0493
054CVHT06BNN 1/4” (6mm) 70 20.95054CVHT08BNN 5/16” (8mm) 70 20.95054CVHT10BNN 3/8” (10mm) 69 20.95054CVHT13BNN 1/2” (13mm) 69 20.95
057 SeriesCouplings
Male Thread, BSPT
0491
057CVMT14SNN 1/4” 63 12.70057CVMT38SNN 3/8” 63 19.55057CVMT12SNN 1/2” 58 19.55
Female Thread, BSPP
0491
057CVFP14SNN 1/4” 58 17.10057CVFP38SNN 3/8” 58 19.55057CVFP12SNN 1/2” 60 19.55
Hose Tail
0491
057CVHT06SNN 1/4” (6mm) 74 20.40057CVHT08SNN 5/16” (8mm) 74 15.70057CVHT10SNN 3/8” (10mm) 74 15.70057CVHT13SNN 1/2” (13mm) 74 15.70
050 Series
Couplings
Male Thread, BSPP
0487
050CVMP18BNN 1/8” 37 9.95050CVMP14BNN 1/4” 38 9.95050CVMP38BNN 3/8” 38 13.70
Panel Mount, BSPP
0487
050CVMB18BNN 1/8” 45 10mm 17.65050CVMB14BNN 1/4” 45 13mm 62.55
Quick Fit Tube Connection, with Spring Guard
0487
050CVTS06BNN 4 x 6 125 15.40050CVTS08BNN 6 x 8 130 15.40
075 SeriesCouplings
Male Thread, BSPT
0492
075CVMT14SNN 1/4” 60 20.70075CVMT38SNN 3/8” 60 18.75075CVMT12SNN 1/2” 55 22.50
Female Thread, BSPP
0492
075CVFP14SNN 1/4” 55 18.75075CVFP38SNN 3/8” 55 19.05075CVFP12SNN 1/2” 56 22.20
Hose Tail
0492
075CVHT06SNN 1/4” (6mm) 71 18.75075CVHT08SNN 5/16” (8mm) 71 18.75075CVHT10SNN 3/8” (10mm) 71 19.00075CVHT13SNN 1/2” (13mm) 71 19.65
Sec
tio
n 3
– P
neum
atic
QR
C
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
See page 387-39 for full range
10
Filter + Regulator + LubricatorTech Sheet 60527
Supplied with Mounting Bracket & Gauge, BSPP
0132
FM2-20-01-C 1/8” 500 65.35FM2-30-02-C 1/4” 2000 101.00FM2-40-03-C 3/8” 4000 140.25FM2-40-04-C 1/2” 4000 140.25FM2-50-06-C 3/4” 5000 242.35FM2-50-10-C 1” 5000 242.35
Filter Regulator + LubricatorTech Sheet 60528
Supplied with Mounting Bracket & Gauge, BSPP
0132
FM2-21-01-C 1/8” 500 58.10FM2-31-02-C 1/4” 2000 81.50FM2-41-03-C 3/8” 4000 117.00FM2-41-04-C 1/2” 4000 117.00FM2-51-06-C 3/4” 5000 199.65FM2-51-10-C 1” 5000 199.65
Filter RegulatorTech Sheet 60529
Supplied with Mounting Bracket & Gauge, BSPP
0132
FM2-20-01-W 1/8” 500 38.15FM2-30-02-W 1/4” 1700 47.95FM2-40-03-W 3/8” 3000 74.30FM2-40-04-W 1/2” 3000 74.30FM2-50-06-W 3/4” 5000 106.65FM2-50-10-W 1” 5000 106.65
FilterTech Sheet 60530
BSPP
0132
FM2-20-01-F 1/8” 500 15.00FM2-30-02-F 1/4” 1700 29.65FM2-40-03-F 3/8” 3000 38.25FM2-40-04-F 1/2” 3000 38.25FM2-50-06-F 3/4” 5000 64.55FM2-50-10-F 1” 5000 64.55
RegulatorTech Sheet 60531
Supplied with Mounting Bracket & Gauge, BSPP
0132
FM2-20-01-R 1/8” 500 30.35FM2-30-02-R 1/4” 1700 39.30FM2-40-03-R 3/8” 3000 56.00FM2-40-04-R 1/2” 3000 63.55FM2-50-06-R 3/4” 5000 76.00FM2-50-10-R 1” 5000 76.00
LubricatorTech Sheet 60532
BSPP
0132
FM2-20-01-L 1/8” 500 14.90FM2-30-02-L 1/4” 1700 29.45FM2-40-03-L 3/8” 3000 39.20FM2-40-04-L 1/2” 3000 39.20FM2-50-06-L 3/4” 5000 71.80FM2-50-10-L 1” 5000 71.80
The manufacturers strive to maintain quality and are continually improving products to suit the industry.Due to the success of the Professional FRL’s, The Professional Range has been revamped with improved structure and sensitivity.
200 and 300 series now come with larger, stronger drip cups, extending the products in use life cycle.Advancements to the construction of the regulators mechanism, has given extra sensitivity on the control this helps to ensure the system is working to the optimum pressure.
• Heavy duty• 20 micron filtration as standard• Metal construction• Modular compact design• Semi-auto drain as standard• Guard bowl protection only on
FM3000, FM4000 and FM5000 units• Micro Gauge also available
Working Temperature:-10ºC to +60ºC
Working Pressure:10 bar
PROFESSIONAL RANGE MARK 2...
Regulating Pressure:1.5 bar to 8.5 bar
Regulating Pressure:1.5 bar to 8.5 bar
Regulating Pressure:1.5 bar to 8.5 bar
Regulating Pressure:1.5 bar to 8.5 bar
See pages 482-483 for full range
11
Filter + Regulator + Lubricator
• Heavy duty
• 40 micron filter as standard, 5 micron filter available on request
• Auto drain as standard, manual drain available on request
• Metal construction
• Metal bowl guard as standard
Working Temperature:-10°C to +60°C
Maximum Working Pressure:12 bar
Supplied with Mounting Bracket & Gauge, 0-12 bar, BSPP
0475
DC200-01-D 1/8” 1700 81.70DC200-02-D 1/4” 1700 81.70DC200-03-D 3/8” 1700 81.70DC400-03-D 3/8” 3500 137.25DC400-04-D 1/2” 3500 137.25DC400-06-D 3/4” 3500 137.25DC600-06-D 3/4” 11000 235.30DC600-08-D 1” 11000 235.30
Filter Regulator + Lubricator
Supplied with Mounting Bracket & Gauge, 0-12 bar, BSPP
0475
DC201-01-D 1/8” 1700 74.95DC201-02-D 1/4” 1700 74.95DC201-03-D 3/8” 1700 74.95DC401-03-D 3/8” 3500 117.00DC401-04-D 1/2” 3500 117.00DC401-06-D 3/4” 3500 117.00DC601-06-D 3/4” 11000 211.15DC601-08-D 1” 11000 211.15
Professional Intelligence Range
Filter
Supplied with Mounting Bracket, BSPP
0475
DF200-01-D 1/8” 1700 28.10DF200-02-D 1/4” 1700 28.10DF200-03-D 3/8” 1700 28.10DF400-03-D 3/8” 3500 49.20DF400-04-D 1/2” 3500 49.20DF400-06-D 3/4” 3500 49.20DF600-06-D 3/4” 11000 87.85DF600-08-D 1” 11000 87.85
Filter Regulator
Supplied with Mounting Bracket & Gauge, 0-12 bar, BSPP
0475
DFR200-01-D 1/8” 1700 58.30DFR200-02-D 1/4” 1700 58.30DFR200-03-D 3/8” 1700 58.30DFR400-03-D 3/8” 3500 84.30DFR400-04-D 1/2” 3500 84.30DFR400-06-D 3/4” 3500 84.30DFR600-06-D 3/4” 11000 156.75DFR600-08-D 1” 11000 156.75
Regulator
Supplied with Mounting Bracket & Gauge, 0-12 bar, BSPP
0475
DR200-01 1/8” 1700 31.60DR200-02 1/4” 1700 31.60DR200-03 3/8” 1700 31.60DR400-03 3/8” 3500 63.25DR400-04 1/2” 3500 63.25DR400-06 3/4” 3500 63.25DR600-06 3/4” 11000 101.95DR600-08 1” 11000 101.95
Lubricator
Supplied with Mounting Bracket, BSPP
0475
DL200-01 1/8” 1700 28.10DL200-02 1/4” 1700 28.10DL200-03 3/8” 1700 28.10DL400-03 3/8” 3500 43.95DL400-04 1/2” 3500 43.95DL400-06 3/4” 3500 43.95DL600-06 3/4” 11000 77.30DL600-08 1” 11000 77.30
Tech Sheet 60372
Tech Sheet 60374
Tech Sheet 60373
Tech Sheet 60375
Tech Sheet 60371
Tech Sheet 60370
Accessories
Mounting Brackets
0475
MB-D200 200 Series 3.35MB-D400 400 Series 4.45MB-D600 600 Series 5.55
Filter Elements, 40 Micron
0475
FE-D200 200 Filter Series 3.35FE-D400 400 Filter Series 6.10FE-D600 600 Filter Series 7.25
Joining Bracket Screws
0475
JBS-D200 200 Series Short Screw 1.65JBS-D400 400 Series Short Screw 2.20JBS-D600 600 Series Short Screw 2.80JBL-D200 200 Series Long Screw 2.20JBL-D400 400 Series Long Screw 3.05JBL-D600 600 Series Long Screw 3.90
• Pack of 2
• Pack of 2
See page 484-485 for full range
12
Air Preparation
Working Temperature:-5ºC to +50ºC
Maximum Working Pressure:16 bar
Series MD, Modular Filter/Regulator + Lubricator Combination Units
Semi-auto Drain, 25 Micron, supplied with Mounting Bracket & Gauge, BSPP
0158
MD1-000015-1/8 1/8” 96.80MD1-000015-1/4 1/4” 96.80MD1-000015-3/8 3/8” 96.80
Tech Sheet 60160
The new Series MD air preparation product line has been designed to meet the numerous demands of a market requiring light and compact modular products which are characterised by high performance, flexible connection and orientation.The different functions are connected to each other by means of intermediate joining cartridges.Thanks to the solution adopted for the pneumatic connection, it is possible to equip the same element with interchangeable cartridges that are available in different sizes and can either be threaded or integrated with a super rapid push-in fitting.
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tion
6 –
Pne
umat
ic &
Vac
uum
Equ
ipm
ent
Series MD, Modular Pressure Regulators
Pressure Regulators, Self-relieving
0158
MD1-R000 0.5-10 29.20MD1-R200 0-2 29.20MD1-R400 0-4 29.20MD1-R700 0.5-7 28.00
Semi-auto Drain
0158
MD1-F000 No Indicator 25 24.05MD1-F100 No Indicator 5 24.05MD1-F001 With Indicator 25 43.00MD1-F101 With Indicator 5 43.00
Tech Sheet 60168
Tech Sheet 60164
Series MD, Modular Filters
Series MD, Modular Lubricator
Working Temperature:-5ºC to +50ºC
Maximum Working Pressure:16 bar
Lubricator
0158
MD1-L00 32.35
Series MD, Modular Valves
3/2 Lockable Isolation Valves
0158
MD1-V36 Pneumatic Control 66.85MD1-V01 Lockable Manual Control 44.85
Series MD, Porting Cartridges
Joining Cartridge
0158
MD1-C 2.95
Porting cartridges can be used on all Series MD module equipment, offering versatility.
Threaded, BSPP
0158
MD1-A-1/8 1/8” 4.30MD1-A-1/4 1/4” 4.30MD1-A-3/8 3/8” 4.30
Push Fit
0158
MD1-A-6 6 6.60MD1-A-8 8 7.50MD1-A-10 10 8.25
Tech Sheet 60169
Tech Sheet 60171
Tech Sheet 60175
Tech Sheet 60175
Tech Sheet 60175
See page 704-706 for full range
13
Ball Valves
Heavy Model, Full Bore, Brass Ball Valve
Tech Sheet 60402
Female, BSPP
0109
HMBV-14 1/4” 9.50HMBV-38 3/8” 9.25HMBV-12 1/2” 12.80HMBV-34 3/4” 17.70HMBV-1 1” 26.90HMBV-114 1.1/4” 40.05HMBV-112 1.1/2” 63.65HMBV-2 2” 91.15HMBV-212 2.1/2” 196.75HMBV-3 3” 285.50HMBV-4 4” 513.20
Sec
tio
n 7
– Va
lves
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Super Filter Ball Valves, Brass
BSPP
0468
SFBV-12 1/2” 15.20SFBV-34 3/4” 22.60SFBV-1 1” 30.65SFBV-114 1.1/4” 55.30SFBV-112 1.1/2” 77.35SFBV-2 2” 123.05
T Handle, BSPP
0468
SFBVT-12 1/2” 15.20SFBVT-34 3/4” 22.60SFBVT-1 1” 30.65
Full Flow Venting Ball Valves, BrassConforms to Directive 97/23/EC.
Working Temperature:-10ºC to +120ºC
Maximum Working Pressure @ +20ºC45 bar (1/2” to 3/4”)40 bar (1”)30 bar (1.1/4” to 2”)
BSPP
0468
BV215-12 1/2” 12.95BV215-34 3/4” 17.85BV215-1 1” 27.90BV215-114 1.1/4” 45.00BV215-112 1.1/2” 63.55BV215-2 2” 97.30
Heavy Duty Ball Valves, Brass
BSPP
0468
BV101-14 1/4” 63 12.45BV101-38 3/8” 63 12.45BV101-12 1/2” 57 16.15BV101-34 3/4” 57 24.95BV101-1 1” 51 36.40BV101-114 1.1/4” 40 58.75BV101-112 1.1/2” 40 82.30BV101-2 2” 40 133.65
Working Temperature:-10ºC to +120ºC
Tech Sheet 60155
Tech Sheet 60155
Tech Sheet 60156
Tech Sheet 60157
See page 749-750 for full range
14
Ball Valves
Dual Sealing, Gas Approved Ball Valves• Manufactured in accordance to EN331• ISO 228 parallel female threads to EN10226-1• Full port to DIN 3357 for maximum flow• PED 97/23 CE• Spring return handle available on request
Working Temperature: -40°C to +170°CAS4617 Limitations for Gas: 0°C to +60°C
Maximum Working Pressure: Up to 2”: 40 bar Over 2”: 30 barAS4617 Limitations for Gas: Up to 2”: 2100Kpa 2.1/2” to 4”: 150Kpa
Tech Sheet 20558
BSPP
0358
BV84-14 1/4” 16.40BV84-38 3/8” 16.40BV84-12 1/2” 19.25BV84-34 3/4” 26.50BV84-1 1” 42.85BV84-114 1.1/4” 70.30BV84-112 1.1/2” 87.35BV84-2 2” 161.05BV84-212 2.1/2” 414.25BV84-3 3” 550.55BV84-4 4” 863.75
Dezincification Resistant Ball ValvesThrough the use of new technology, these valves retain the reliability and competitiveness of brass but are comparable to bronze in corrosion resistance.
Working Temperature:-40°C to +170°C
Maximum Working Pressure:30 bar
Tech Sheet 60396
Female x Female, BSPP
0358
DZRBV-12 1/2” 22.85DZRBV-34 3/4” 33.00DZRBV-1 1” 48.60DZRBV-114 1.1/4” 77.40DZRBV-112 1.1/2” 97.40DZRBV-2 2” 155.70DZRBV-212 2.1/2” 552.80DZRBV-3 3” 711.45DZRBV-4 4” 1149.15
Spring Return ValvesValves can be opened normally by rotating the handle 90 degrees. When the user releases the handle, the valve shuts off automatically.
Maximum Working Pressure:40 bar
Tech Sheet 60395
Female x Female, BSPP
0358
SPBV-14 1/4” 37.50SPBV-38 3/8” 37.50SPBV-12 1/2” 37.50SPBV-34 3/4” 50.15SPBV-1 1” 69.20SPBV-114 1.1/4” 119.15SPBV-112 1.1/2” 140.40SPBV-2 2” 208.10
Dual Sealing WRAS Ball ValvesThe new BV84W potable ball valve range is approved for use with drinking water. The ball design avoids water stagnation and the spread of bacteria in the system.
Working Temperature:-40°C to +150°C
Tech Sheet 60397
Female x Female, BSPP
0358
BV84W-14 1/4” 15.95BV84W-38 3/8” 15.95BV84W-12 1/2” 18.75BV84W-34 3/4” 25.80BV84W-1 1” 41.60BV84W-114 1.1/4” 68.40BV84W-112 1.1/2” 84.90BV84W-2 2” 134.25
Maximum Working Pressure:40 bar
Working Temperature:-40°C to +170°C
High Pressure Mini Ball ValvesMaterial: Nickel Plated BrassSeals: PTFE
Working Temperature:-20°C to +90°C
Maximum Working Pressure:30 bar
Tech Sheet 60394
Female x Female, BSPP
0358
HPMBV-18FF 1/8” 11.70HPMBV-14FF 1/4” 10.05HPMBV-38FF 3/8” 10.05HPMBV-12FF 1/2” 13.95HPMBV-34FF 3/4” 23.90
Female x Male, BSPP
0358
HPMBV-18FM 1/8” 11.70HPMBV-14FM 1/4” 10.05HPMBV-38FM 3/8” 10.05HPMBV-12FM 1/2” 13.95HPMBV-34FM 3/4” 23.90
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 7
– Va
lves
See page 754
15
Solenoid Valves
2/2 Way Solenoid Valves, Brass, Compact Design
Parker’s 2 way and 3 way, normally closed and normally open, solenoid valves are used in a wide variety of applications, with or without pressure differential. Ideal for air, liquids and gases, these valves are available with a brass or stainless steel body with a range of sealing materials offering vast chemical compatibilities.
Normally Closed, FKM Seal, BSPP
0484
321K3106-230AC 1/4” 230V AC 321K3106-8993-4889803D 109.50321K3106-24DC 1/4” 24V DC 321K3106-8993-488980C2 131.20321K3306-230AC 3/8” 230V AC 321K3306-8993-4889803D 110.55321K3306-24DC 3/8” 24V DC 321K3306-8993-488980C2 110.55321K3506-230AC 1/2” 230V AC 321K3506-8993-4889803D 125.10321K3506-24DC 1/2” 24V DC 321K3506-8993-488980C2 125.10321K3606-230AC 3/4” 230V AC 321K3606-8993-4889803D 143.00321K3606-24DC 3/4” 24V DC 321K3606-8993-488980C2 169.95321K3706-230AC 1” 230V AC 321K3706-8993-4889803D 157.30321K3706-24DC 1” 24V DC 321K3706-8993-488980C2 157.30
Applications:• Compressors• Water dispensing and
purification• Cooling systems• Sterilisers• Analysers and diagnostic
equipment
• Medical and dental devices• Welding equipment• Lubrication equipment• Beverage dispensing and
vending machines• Oil burners
• Humidification and misting equipment
• Mobile equipment• Textile and dry cleaning
machines• Irrigation
Normally Open, NBR Seal, BSPP
0484
550056DIS 3/8” 24V DC 550056DIS 112.70550057DIS 3/8” 230V AC 550057DIS 112.70550046DIS 1/2” 24V DC 550046DIS 112.70550047DIS 1/2” 230V AC 550047DIS 112.70550048DIS 3/4” 24V DC 550048DIS 138.75550049DIS 3/4” 230V AC 550049DIS 138.75550050DIS 1” 24V DC 550050DIS 171.05550051DIS 1” 230V AC 550051DIS 171.05550052DIS 1.1/2” 24V DC 550052DIS 306.95550053DIS 1.1/2” 230V AC 550053DIS 306.95550054DIS 2” 24V DC 550054DIS 378.30550055DIS 2” 230V AC 550055DIS 378.30
2/2 Way Solenoid Valves, Brass, Hot Water & Liquids
2/2 Way Solenoid Valves, Direct Lift, Stainless Steel
Normally Closed, FKM Seal, BSPP
0484
221G6306-230AC 3/8” 230V AC 221G6306-2995-4818653D 185.60221G6336-24DC 3/8” 24V DC 221G6336-2995-492425C2 208.05221G6506-230AC 1/2” 230V AC 221G6506-2995-4818653D 220.35221G6536-24DC 1/2” 24V DC 221G6536-2995-492425C2 168.40221G6606-230AC 3/4” 230V AC 221G6606-2995-4818653D 246.85221G6636-24DC 3/4” 24V DC 221G6636-2995-492425C2 185.80221G6106-230AC 1” 230V AC 221G6106-2995-4818653D 185.10221G6136-24DC 1” 24V DC 221G6136-2995-492425C2 137.25
Solenoid Valves, Stainless Steel 316L
2/2 Way, Normally Closed, FKM Seal, BSPP
0484
550000DIS 1/8” 1.5 24V DC 550000DIS 126.85550001DIS 1/8” 1.5 230V AC 550001DIS 126.85550002DIS 1/4” 1.5 24V DC 550002DIS 133.35550003DIS 1/4” 1.5 230V AC 550003DIS 133.35550004DIS 1/4” 2.5 24V DC 550004DIS 133.35550005DIS 1/4” 2.5 230V AC 550005DIS 133.35550006DIS 1/4” 3 24V DC 550006DIS 168.15550007DIS 1/4” 3 230V AC 550007DIS 173.20550008DIS 3/8” 5 24V DC 550008DIS 171.50550009DIS 3/8” 5 230V AC 550009DIS 176.50550010DIS 1/2” 5 24V DC 550010DIS 176.35550011DIS 1/2” 5 230V AC 550011DIS 181.40
Angle Seat ValvesAnti Water Hammer Construction, Flow Under Seat, 304 Stainless Steel Actuator, 316L Stainless Steel Body, Nomally Closed, BSPP
0484
PA10SAG3R050S 3/8” 13 16 PA10SAG3R050S 190.55PA15SAG4R050S 1/2” 13 16 PA15SAG4R050S 198.75PA20SAG5R050S 3/4” 18 10 PA20SAG5R050S 211.25PA25SAG6R063S 1” 24 8 PA25SAG6R063S 298.20PA32SAG7R080S 1.1/4” 31 11 PA32SAG7R080S 501.85
See pages 813-816
Sec
tio
n 7
– Va
lves
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
16
Equal Female
0473
69002A15 15 10.3569002A22 22 14.4569002A28 28 18.2569002A35 35 28.7069002A42 42 47.9069002A54 54 66.15
NiroSan® Stainless Steel Press Fit Piping System
NiroSan® press system fittings and NiroSan® system pipes in stainless steel with tool compatibility, leak path feature and ‘push and stay’ function.
Stainless steel systems from SANHA can be used universally. The various NiroSan® pipes and NiroSan® press system fittings can be combined with each other, making them particularly user friendly.
Series 9000, 45º Elbows
Series 9000, TeesEqual
0473
6913015 15 16.956913022 22 20.806913028 28 24.306913035 35 30.756913042 42 43.656913054 54 49.80
Features• Pressable with V, M and
SA profiles• Suitable for a very broad range
of applications• Long service life of fittings and
EPDM sealing rings
• Inseparable, pressure-formed connection
• WRAS tested and certified• All fittings and tube are
manufactured from 316 L grade stainless steel
Working Temperature:-30°C to +120°C
Maximum Working Pressures:Water: 22mm: 40 bar, 28-35mm: 25 bar,
42-54mm: 16 barFlammable Gases: 5 barNon-flammable/Toxic Gases: 16 bar
Products also available, suitable for both gas and industrial oil applications.
Tech Sheet 60369
Series 9000, Straights
Coupling
0473
6927015 15 7.256927022 22 9.106927028 28 10.206927035 35 12.706927042 42 17.356927054 54 20.90
Series 9000, Tube
6 Metre Lengths
0473
6960015 15 65.656960022 22 103.456960028 28 131.806960035 35 197.506960042 42 237.506960054 54 299.00
See pages 880-882 for the full range
17
NiroSan® Stainless Steel Press Fit Piping System
Solder Ring
Couplings
Manufactured from copper and copper alloy. Designed for jointing copper tubes to BS EN 1057 in hot and cold water services, in small bore and mini bore central heating, low pressure steam heating, and in-vented/un-vented closed circuit heating systems.• WRAS approved• Manufactured to BS EN 1254 Part 1
Working Temperature:-40ºC to +110ºC
Maximum Working Pressure:16 bar (-40ºC to +30ºC)10 bar (+30ºC to +65ºC)6 bar (+65ºC to +110ºC)
Page Tech Sheet 60249
Straight
0474
M-SRSC-8 8 1.20M-SRSC10 10 0.70M-SRSC-15 15 0.35M-SRSC-22 22 0.65M-SRSC-28 28 1.65M-SRSC-35 35 3.35M-SRSC-42 42 3.80M-SRSC-54 54 5.00
Tees
Equal
0474
M-SRET-10 10 4.25M-SRET-15 15 0.90M-SRET-22 22 1.95M-SRET-28 28 4.80M-SRET-35 35 5.05M-SRET-42 42 9.40M-SRET-54 54 12.45
Elbows
90° Elbows
0474
M-EF90E-8 8 0.25M-EF90E-10 10 0.20M-EF90E-15 15 0.25M-EF90E-22 22 0.60M-EF90E-28 28 1.10M-EF90E-35 35 4.40M-EF90E-42 42 5.30M-EF90E-54 54 9.75
Sec
tio
n 9
– A
dap
tors
& F
itti
ngs
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Miniature Fittings M3-M6
Male Thread, Metric
0425
MIPC4-M3 4/2.5 M3 1.25MIPC3-M5 3/2 M5 2.00MIPC4-M5 4/2.5 M5 1.80MIPC5-M5 6/4 M5 1.80MIPC4-M6 4/2.5 M6 1.65MIPC6-M6 6/4 M6 2.00
Male Thread, Metric
0425
MIMHT2-M3 2 M3 1.75MIMHT3-M3 3 M3 0.90MIMHT4-M3 4 M3 0.55MIMHT3-M5 3 M5 0.90MIMHT4-M5 4 M5 0.55MIMHT6-M5 6 M5 0.55
Male Studs
Miniature fittings are for use with air connections in confined areas. The hose nipple and hose elbow styles accept nylon, soft nylon and polyurethane tubing.
Working Temperature:-5ºC to +60ºC
Maximum Working Pressure:10 bar
Page Tech Sheet 60240
Male Elbows
Male Thread, Metric
0425
MIPL4-M3 4/2.5 M3 2.70MIPL4-M5 4/2.5 M5 1.50MIPL5-M6 6/4 M6 1.50
Barb Male Hose Tail
Barb Male Elbow Hose Tail
Male Thread, Metric
0425
MIEHT2-M3 2 M3 3.60MIEHT3-M3 3 M3 1.75MIEHT4-M3 4 M3 1.60MIEHT3-M5 3 M5 2.70MIEHT4-M5 4 M5 2.70MIEHT6-M5 6 M5 2.70
See pages 1026-1029 for the full range
See pages 962 for the full range
18
Dosing Pumps
MixRite 3.5 SeriesTefen’s MixRite line of water driven proportional dosing pumps, are used to ensure precise additive injection directly into the water or fluid line under various flow rates, feed ratios and different ranges of pressure.
Features • Mixes additive and water precisely • The dosage can be adjusted easily
and quickly • Repair is simple and inexpensive • Key internal parts are from the
highest quality material available (Hastelloy spring. Viton Rubber seal)
Working Temperature:4°C to +40°C
Maximum Working Pressure:8 bar
Tech Sheet 60239
3/4” BSPT Male
0471
MRDP-1 10-3500 0.2-8 Dosage Rate-1:333 - 1:500 418.00MRDP-2 10-3500 0.2-8 Dosage Rate-1:1000 - 1:111 418.00MRDP-3 10-3500 0.2-8 Dosage Rate-1:333 - 1:50 408.00MRDP-4 10-3500 0.2-8 Dosage Rate-1:200 - 1:20 518.00MRDP-5 50-3500 0.2-8 Dosage Rate-1:100 - 1:10 842.00
Fittings made of PVDF function better then Nylon when exposed to a wide range of temperatures and high corrosive chemicals.
This enables them to be used in industries such as chemical processing due to their excellent chemical resistance properties.
Working Temperature:-20°C to +120°C
Maximum Working Pressure:14 bar at 20°C
Tech Sheet 60237
BSPT
0472
PPV1-6-18 6 x 4 1/8” 18.00PPV1-8-14 8 x 6 1/4” 20.60PPV1-12-38 12 x 10 3/8” 30.10
Tube x Tube
0472
PPV3-6 6 x 4 10.40PPV3-8 8 x 6 11.05PPV3-12 12 x 10 18.20
PVDF Fittings
Male Connector Equal Connector
Unequal Nipple
BSPT
0472
PV1-14-18 1/4” 1/8” 4.10PV1-38-18 3/8” 1/8” 4.95PV1-38-14 3/8” 1/4” 4.10PV1-12-14 1/2” 1/4” 5.60PV1-12-38 1/2” 3/8 4.30
Equal Tee
BSPT
0472
PV7-18 1/8” 7.45
Male x Hose Connector
BSPT
0472
PPV15-4-18 1/8” 1/8” 2.30PPV15-4-14 1/8” 1/4” 2.45PPV15-5-18 3/16” 1/8” 2.30PPV15-5-14 3/16” 1/4” 2.45PPV15-6-18 1/4” 1/8” 2.45
Elbow Hose Connector
Tube x Tube
0472
PV18-5 3/16” 2.95PV18-6 1/4” 3.15PV18-8 5/16” 3.30PV18-10 3/8” 3.65PV18-12 1/2” 3.80
See pages 1057-1059 for the full range
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 9
– A
dap
tors
& F
itti
ngs
19
Rubber-covered Agricultural Drag Hose
Applications• Linear and travelling irrigation• Sludge and slurry disposal• Liquid manure handling• Waste water distribution systems• Heavy-duty water transport
Features• Excellent resistance to weathering,
UV and ozone• Superior abrasion resistance, suitable for
all ground conditions• No biodegradation, excellent resistance to
agricultural chemicals and fertilizers• Minimum pressure loss, very low
elongation• Supreme adhesion level between rubber
and textile reinforcement• Very durable and hard-wearing for long
service life
Working Temperature:-20°C to +80°C
Tech Sheet 60376
100 Metre Coils
0477 (kg) RLDH2-100 2” 3.3 20 3,900 1643.45RLDH3-100 3” 3.3 20 8,800 1844.35RLDH4-100 4” 3.5 20 12,400 2452.15RLDH5-100 5” 3.9 18 17,000 3247.80RLDH6-100 6” 3.9 17 17,900 3886.95RLDH10-100 10” 5.2 12 43,200 12130.45
PU Multipurpose Layflat Hose
Applications• Construction sites, waste water industry• Agriculture and mining• Transport of abrasive materials• Flexible pipeline even in extreme terrain• Irrigation and sludge disposal• Heavy-duty service under toughest
conditions
Features• Superior abrasion resistance• Extremely hard-wearing and durable for
long service life• Resistant to oil, fuel and a wide range
of chemicals• Resistant to weathering and ozone• Flexible and lightweight compared to
mandril-built hoses, good handling• Excellent flexibility when cold
Working Temperature:-50°C to +75°C
Tech Sheet 60377
100 Metre Coils
0477 (kg) PUMPH2-100 2” 2.4 20 5,000 1826.10PUMPH3-100 3” 2.8 20 6,900 1909.55PUMPH4-100 4” 3.3 17 13,800 2582.60PUMPH5-100 5” 3.4 17 17,000 3365.20PUMPH6-100 6” 3.7 17 17,900 4043.45PUMPH10-100 10” 5.1 17 45,500 12939.15PUMPH12-100 12” 5.3 12 55,000 17608.70
PU Layflat Drag Hose
Applications• Construction sites, waste water industry• Agriculture and mining• Transport of abrasive materials• Flexible pipeline even in extreme terrain• Irrigation and sludge disposal• Supply hose for liquid manure and sludge
injection systems• Heavy-duty service under toughest conditions
Features• Superior abrasion resistance• Extremely hard-wearing and durable for
long service life• Ultra-high tensile strength• Resistant to oil, fuel and a wide range of
chemicals• Resistant to weathering, UV and ozone• Lightweight and easy to handle compared
to rubber material-handling hose• Excellent flexibility when cold
Tech Sheet 60378
100 Metre Coils
0477 (kg) PUDH4-100 4” 3.8 14 13,800 3297.40PUDH5-100 5” 3.8 14 20,500 4176.50PUDH6-100 6” 4.0 14 27,200 5050.45
Working Temperature:-50°C to +75°C
Layflat Hose
200m length available on requestSee page 1278
20
Heavy Duty Suction HoseSmooth inside and outside non-restricting tube. The ridged PVC spiral resists crushing impact. High abrasion resistance makes it ideal to transfer powder.Industries: Suitable for construction, civil engineering, agriculture and ships.Applications: Suction discharge for sand, gravel, cement and iron fittings, suction and press-transfer of various grains.Pressure: Values given are based on the short term burst pressure of the hose at +20°C based on a 3:1 safety factor.
Chemical Resistance: Resistant to most oxidising and reducing agents and diluted acids and alkalis. • • ••• • •• •• • •• ••• •• •• • • • •• • • •• • ••• • • • • •• • ••• • •• • •• • •• ••Any increase in temperature above +20°C will result in a decline in working pressure values.
Page Tech Sheet 60441
Suction Hose
Working Temperature: -5°C to +65°C
30 Metres
5996
HDSH2-30 2” 7 300 690.00HDSH3-30 3” 5 450 1168.70HDSH4-30 4” 5 630 1940.60HDSH6-30 6” 4 1100 3743.25
10 Metres
5996
HDSH2-10 2” 7 300 253.00HDSH3-10 3” 5 450 428.50HDSH4-10 4” 5 630 711.55HDSH6-10 6” 4 1100 1372.50
See page 1281
21
Composite Hose Assemblies
TechOil GGConstruction:• Galvanised inner wire• Galvanised steel outer wire• Polypropylene bore • Thermoplastic layered wall• PVC-coated polyester cover,
various colours
Working Temperature:-30°C to +100°C
Maximum Working Pressure:14 bar
1” Gunmetal Lugged End Fittings, BSPP
0482
CTOGML-1-1 1” 1 100 122.00CTOGML-1-3 1” 3 100 160.70CTOGML-1-5 1” 5 100 199.40CTOGML-1-7 1” 7 100 238.10
1” Stainless Steel Lugged End Fittings, BSPP
0482
CTOSSL-1-1 1” 1 100 127.40CTOSSL-1-3 1” 3 100 166.10CTOSSL-1-5 1” 5 100 204.80CTOSSL-1-7 1” 7 100 243.50
Coupling types available include:BSP, NPT, all flange tables, cam & groove, lever couplings, Victaulic, hygienic fittings.
Main Conveyances:• Black oils and heavy lubricants• Light distillates (petrol, diesel oil,
paraffin, kerosene) • 100% aromatics (benzene,
toluene, xylene) • Solvents (acetone, alcohol)
Assemblies are available in various lengths, end terminations and materials Please contact our Business Development Team for a quotation on your bespoke requirements
Tech Sheet 60411
1” Carbon Steel PN16 Flange End Fittings
0482
CTCSPN16-1-1 1” 1 100 131.40CTCSPN16-1-3 1” 3 100 176.85CTCSPN16-1-5 1” 5 100 222.35CTCSPN16-1-7 1” 7 100 267.80
1” Stainless Steel PN16 Flange End Fittings
0482
CTCPN16-1-1 1” 1 100 170.40CTCPN16-1-3 1” 3 100 215.85CTCPN16-1-5 1” 5 100 261.35CTCPN16-1-7 1” 7 100 306.80
TechChem PGWorking Temperature:-30°C to +80°C
Maximum Working Pressure:14 bar
Construction:• Polypropylene-coated inner wire• Galvanised steel outer wire• Stainless steel outer wire also available• Polypropylene bore • Thermoplastic layered wall• PVC-coated polyester cover,
various colours
Coupling types available include:BSP, NPT, all flange tables, cam & groove, lever couplings, Victaulic, hygienic fittings.
Main Conveyances:Corrosive acids and alkalis, aldehydes, amines, aliphatic, aromatic fuels, alcohol, esters, ketones, and petroleum products.
Tech Sheet 60412
1” Gunmetal Lugged End Fittings, BSPP
0482
CTFGML-1-1 1” 1 100 137.10CTFGML-1-3 1” 3 100 205.95CTFGML-1-5 1” 5 100 274.85CTFGML-1-7 1” 7 100 343.70
1” Stainless Steel Lugged End Fittings, BSPP
0482
CTFSSL-1-1 1” 1 100 142.50CTFSSL-1-3 1” 3 100 211.35CTFSSL-1-5 1” 5 100 280.25CTFSSL-1-7 1” 7 100 349.10
TechFlon SGWorking Temperature:-30°C to +100°C
Maximum Working Pressure:14 bar
Construction:• Stainless steel inner wire• Galvanised outer wire• Stainless steel outer wire
also available• PTFE bore • Thermoplastic layered wall• PVC-coated polyester cover,
various colours
Coupling types available include:BSP, NPT, all flange tables, cam & groove, lever couplings, Victaulic, hygienic fittings.
Main Conveyances:Gives better chemical resistance than standard TechChem PG by the inclusion of PTFE bore film. This also helps in restricting permeation of very searching solvents and gives added resistance when conveying concentrated sulphuric acid. In plant or tanker transfer of aggressive chemicals, PTFE lining offers clean bore transfer of product.
Tech Sheet 60413
Materials:Steel, stainless steel, alloy, polypropylene, gunmetal, brass, Hastelloy.Lengths:Up to 20 metres.
Materials:Steel, stainless steel, alloy, polypropylene, gunmetal, brass, Hastelloy.Lengths:Up to 20 metres.
Materials:Steel, stainless steel, alloy, polypropylene, gunmetal, brass, Hastelloy.Lengths:Up to 20 metres.
See pages 1286-1291 for the full range
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
22
• • • • •• • • • •• • ••• • • ••• • ••• •• • ••• • • • •• • • •• •• • ••• • • • •• • • •
40 Metre Coils
0464
XLPECSDH-13-40 1/2” 13 25 65 638.40XLPECSDH-19-40 3/4” 19 32 95 750.50XLPECSDH-25-40 1” 25 39 125 817.00XLPECSDH-32-40 1.1/4” 32 47 160 1064.00XLPECSDH-38-40 1.1/2” 38 53 190 1358.50XLPECSDH-51-40 2” 51 67 255 1884.80
10 Metre Coils
0464
XLPECSDH-13-10 1/2” 13 25 65 175.55XLPECSDH-19-10 3/4” 19 32 95 206.40XLPECSDH-25-10 1” 25 39 125 224.65XLPECSDH-32-10 1.1/4” 32 47 160 292.60XLPECSDH-38-10 1.1/2” 38 53 190 373.60XLPECSDH-51-10 2” 51 67 255 518.30
• • • • •• • • • •• • ••• • • ••• • ••• • • • •• • • • •• • ••• • • ••• • ••• • • • •• • • • •• • ••• • • ••• • •
Tech Sheet 60132
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
See page 1297
Industrial Hose
WYREMTech Sheet 60177
6 Metre Lengths
0469
W8006-025 25 60 0.45 185.05W8006-032 32 63 0.40 199.80W8006-038 38 65 0.40 196.60W8006-045 45 68 0.35 181.75W8006-051 51 71 0.35 186.15W8006-060 60 75 0.35 200.95W8006-063 63.5 77 0.30 206.85W8006-076 76 84 0.30 230.50W8006-080 80 87 0.25 234.90W8006-082 82 88 0.25 239.35W8006-090 90 93 0.25 268.90W8006-102 102 100 0.20 285.15W8006-110 110 106 0.20 363.45W8006-127 127 119 0.10 366.40W8006-152 152 139 0.10 468.35W8006-165 165 151 0.05 624.95W8006-180 180 166 0.05 701.80W8006-203 203 189 0.05 709.15W8006-254 254 250 0.05 1081.50W8006-305 305 319 0.05 1270.60
BUTYLFOODTech Sheet 60178
10 Metre Lengths
0470
BUTYLFOOD-112 1.1/2” 230 614.80BUTYLFOOD-2 2” 300 799.00BUTYLFOOD-212 2.1/2” 380 958.20BUTYLFOOD-3 3” 450 1099.20
See pages 1302-1305 for the full range
23
Industrial Hose
Fitted with Tri-Clamp Fittings
0470
Bar
SIL63TC-1-1M 1” 1” 1 121 3.9 419.75SIL63TC-1-2M 1” 1” 2 121 3.9 515.55SIL63TC-1-3M 1” 1” 3 121 3.9 611.35SIL63TC-1-4M 1” 1” 4 121 3.9 707.15SIL63TC-112-1M 1.1/2” 1.1/2” 1 163 3.36 501.85SIL63TC-112-2M 1.1/2” 1.1/2” 2 163 3.36 633.55SIL63TC-112-3M 1.1/2” 1.1/2” 3 163 3.36 765.20SIL63TC-112-4M 1.1/2” 1.1/2” 4 163 3.36 896.90SIL63TC-2-1M 2” 2” 1 238 2.4 673.05SIL63TC-2-2M 2” 2” 2 238 2.4 854.75SIL63TC-2-3M 2” 2” 3 238 2.4 1036.45SIL63TC-2-4M 2” 2” 4 238 2.4 1218.15SIL63TC-3-1M 3” 3” 1 494 1.78 1057.45SIL63TC-3-2M 3” 3” 2 494 1.78 1333.90SIL63TC-3-3M 3” 3” 3 494 1.78 1610.35SIL63TC-3-4M 3” 3” 4 494 1.78 1886.80
Page Tech Sheet 60181
Silicone Hose Assemblies, SIL 630
Fitted with Female RJT Fittings
0470
Bar
SIL65FRJT-1-1M 1” 1” 1 68 14.8 534.25SIL65FRJT-1-2M 1” 1” 2 68 14.8 613.25SIL65FRJT-1-3M 1” 1” 3 68 14.8 692.20SIL65FRJT-1-4M 1” 1” 4 68 14.8 771.15SIL65FRJT-112-1M 1.1/2” 1.1/2” 1 112 12.8 589.80SIL65FRJT-112-2M 1.1/2” 1.1/2” 2 112 12.8 698.40SIL65FRJT-112-3M 1.1/2” 1.1/2” 3 112 12.8 807.00SIL65FRJT-112-4M 1.1/2” 1.1/2” 4 112 12.8 915.55SIL65FRJT-2-1M 2” 2” 1 144 9.2 727.55SIL65FRJT-2-2M 2” 2” 2 144 9.2 877.35SIL65FRJT-2-3M 2” 2” 3 144 9.2 1027.15SIL65FRJT-2-4M 2” 2” 4 144 9.2 1176.95SIL65FRJT-3-1M 3” 3” 1 232 6.1 1191.65SIL65FRJT-3-2M 3” 3” 2 232 6.1 1419.60SIL65FRJT-3-3M 3” 3” 3 232 6.1 1647.55SIL65FRJT-3-4M 3” 3” 4 232 6.1 1875.45
Tech Sheet 60181
Silicone Hose Assemblies, SIL 650V
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
See pages 1302-1305 for the full range
Technosil
Tech Sheet 60179
Tech Sheet
10 Metre Lengths
0470
Bar
TSIL-14 1/4” 40 9.3 123.80TSIL-516 5/16” 45 7.7 146.40TSIL-38 3/8” 55 7.0 163.00TSIL-12 1/2” 70 5.7 213.00TSIL-58 5/8” 85 4.3 263.80TSIL-34 3/4” 95 3.7 338.00TSIL-1 1” 135 3.0 431.60TSIL-114 1.1/4” 160 2.3 508.00
Technosil DB
Tech Sheet 60180
10 Metre Lengths
0470
Bar
TSILDB-14 1/4” 34 23.74 227.00TSILDB-516 5/16” 37 22.85 265.80TSILDB-38 3/8” 46 22.31 306.60TSILDB-12 1/2” 51 19.44 346.20TSILDB-58 5/8” 65 16.97 441.80TSILDB-34 3/4” 76 15.58 512.20TSILDB-1 1” 118 12.50 627.00TSILDB-114 1.1/4” 181 10.07 958.00
24
Abrasion-resistant, Anti-static Industrial PU Ducting
PROTAPE PUR 330 ASMade from premium-grade ester Pre-PUR polyurethane, reinforced with a copper coated spring steel wire helix.Wall thickness: 0.6mm approx.Applications: suction and transport hose for abrasive material, e.g. dust, chippings, powder, granules, fibres, etc.Also suitable for fume extraction, e.g. oil mist, welding fumes and chemical vapours.• Permanently anti-static wall <109Ω• Super lightweight, highly flexible, compressible• High tensile strength and tear resistance• Flame retardant to DIN 4102-B1• Microbe resistance for outdoor use• Smooth bore, optimised flow
(observe direction of flow arrow)• Small bend radius• Good resistance to UV and ozone• Good resistance to oil, petrol and chemicals• Wire spiral reinforcement can be earthedUse clamp type 212/212EC (refer to page 1321).
Tech Sheet 60192
Light/Medium Weight, 0.6mm Wall, Anti-static, 10 Metres
0392
330-0038-1002 38 45 1.060 0.320 0.250 146.50330-0050-1002 50 58 0.815 0.275 0.360 181.50330-0065-1002 65 73 0.630 0.225 0.470 196.00330-0075-1002 75 83 0.545 0.156 0.530 221.50330-0100-1002 100 108 0.410 0.120 0.660 255.00330-0125-1002 125 133 0.330 0.078 0.820 306.00330-0150-1002 150 158 0.275 0.063 0.980 364.50330-0160-1002 160 168 0.255 0.058 1.040 388.00330-0200-1002 200 207 0.315 0.050 1.860 488.50330-0225-1002 225 233 0.180 0.042 1.750 555.50330-0250-1002 250 258 0.165 0.032 2.310 597.50330-0300-1002 300 309 0.135 0.016 2.530 747.50330-0350-1002 350 359 0.115 0.010 2.950 879.00330-0400-1002 400 409 0.105 0.010 3.360 971.00
AIRDUC PUR 350 ASWorking Temperature:-40°C to +90°CIntermittent to:+125°C
Tech Sheet 60188
Medium Weight, 0.7mm Wall, Anti-static, 10 Metres
0392
350-0038-1002 38 45 1.780 0.525 0.310 180.00350-0050-1002 50 57 1.350 0.435 0.400 192.50350-0065-1002 65 70 1.020 0.295 0.520 219.50350-0075-1002 75 82 0.910 0.220 0.590 243.50350-0100-1002 100 107 0.690 0.115 0.800 313.00350-0125-1002 125 132 0.550 0.080 0.980 392.50350-0150-1002 150 157 0.455 0.075 1.400 458.50350-0160-1002 160 167 0.415 0.065 1.500 494.50350-0175-1002 175 182 0.355 0.050 1.630 544.00350-0200-1002 200 207 0.315 0.050 1.860 624.50350-0225-1002 225 232 0.265 0.035 2.080 704.50350-0250-1002 250 257 0.240 0.020 2.310 803.50350-0300-1002 300 307 0.200 0.020 2.770 939.00
Working Temperature:-40°C to +90°CIntermittent to:+125°C
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
Heavy Duty Abrasion-resistant, Anti-static Industrial PU Ducting
REDUCER 271Galvanised steel hose reducer for connecting two hoses of different ID sizes with appropriate external clamping.
Tech Sheet 60194
Galvanised Steel Reducer
0392
271-0075-0000 75 50 92.20271-0100-0000 100 80 105.05271-0125-0000 125 100 109.67271-0150-0000 150 100 120.45271-0200-0000 200 150 142.78271-0250-0000 250 200 151.60
See pages 1308-1315 for the full range
25
Working Temperature:-40ºC to +90ºCIntermittent to:+125ºC
TIMBERDUC PUR 533 ASMade from premium grade Pre-PUR polyurethane with flame retardant additive, reinforced with a spring steel wire helix.Wall Thickness: 0.7mm approx.Applications: woodworking, dust extraction, sawmills, furniture factories, wood recycling, etc. For extracting sawdust, wood shavings, chippings, etc.• Excellent abrasion resistance• Wire spiral reinforcement can be earthed• Permanent anti-static wall <109Ω• Microbe resistant for outdoor use • Resistant to aggressive wood types, wood
preservatives and microbes• High tensile strength and tear resistance• Optimised flow properties
(observe direction of flow arrow)• Flame retardant to DIN 4102-B1Use clamp type 212/212EC (refer to page 1321).
Flame-Retardant, Medium/Heavyweight, 0.7mm Wall, Anti-static, 10 Metres
0392
533-0100-0000 100 109 0.12 0.780 354.00533-0125-0000 125 134 0.085 0.970 448.50533-0150-0000 150 159 0.075 1.370 523.50533-0160-0000 160 169 0.065 1.460 561.50533-0200-0000 200 209 0.055 1.810 572.00533-0250-0000 250 259 0.020 2.250 899.00
Tech Sheet 60190
PVC Industrial Hose & Ducting
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
PROTAPE PUR 330 FOODMade from premium-grade ether Pre-PUR polyurethane, reinforced with a copper coated spring steel wire helix. Wall Thickness: 0.6mm approx. Applications: suction and transport hose for abrasive materials, particularly in food, beverage & pharmaceutical sectors e.g. dust, powder, granules, fibres etc. Also suitable for liquid media, as well as fume extraction • Food grade wall (refer to Tech Sheet for
food approvals) • Compressible, highly flexible • Good resistance to microbe & hydrolysis • Wire spiral reinforcement can be earthed • High tensile strength and tear resistance • Smooth bore, optimised flow
(observe direction of flow arrow) • Small bend radius • Good resistance to UV & ozone • Excellent low temperature flexibility
Working Temperature:-40ºC to +90ºC Intermittent to: +125°C
Tech Sheet 60193
Light/Medium Weight, 0.6mm Wall, Food Grade, 10 Metres
0392
330-0038-0000 38 45 1.060 0.320 0.250 146.50330-0065-0000 63 73 0.630 0.225 0.470 196.00330-0050-0000 50 58 0.815 0.275 0.360 217.80330-0075-0000 75 83 0.545 0.156 0.530 265.65330-0100-0000 100 108 0.410 0.120 0.660 306.35330-0125-0000 125 133 0.330 0.078 0.820 312.50330-0150-0000 150 158 0.275 0.063 0.980 437.25330-0200-0000 200 208 0.205 0.042 1.540 610.50
Food, Beverage & Pharmaceutical Grade Hose & Ducting
NORPLAST PVC 383 DARK GREYA premium quality medium weight ducting made from high gradeflexible PVC reinforced with a tough flexible PVC helix.Applications: for extracting dust, powders, fumes, vapours and gases as well astransfer of fluids. Galvanising and chemical fumes. Boatbuilding, marine andagricultural applications including cable protection. • Good resistance to chemicals• Good resistance to most acids & alkalis• Highly flexible and lightweight• Small bend radius, kink-resistant• Flame retardant to UL94-V2 Use clamp type 208 (refer to page 1321)
Working Temperature:-5°C to +60°C
Tech Sheet 60189
Medium Duty, Flame Retardant PVC Ducting, Dark Grey, 25 Metres
0392
383-0025-0000 25 31 1.000 0.250 0.120 68.75383-0032-0000 32 38 0.850 0.200 0.210 88.75383-0038-0000 38 45 0.750 0.200 0.260 106.25383-0045-0000 45 52 0.650 0.200 0.350 147.50383-0050-0000 50 58 0.500 0.200 0.430 178.75383-0063-0000 63 71 0.450 0.160 0.520 215.00383-0076-0000 76 85 0.400 0.150 0.640 265.00383-0080-0000 80 89 0.350 0.150 0.750 308.75
See pages 1308-1315 for the full range
26
Fire Hose Reels & Accessories
AccessoriesStandards: EN 694.Cover: red, ozone and UV resistant, elastomeric rubber/PVC blended.
Reinforcement: textile braids.Liner: seamless rubber/PVC.
Fire Hose
0463
FHO1930 19 30 49.95FHO2530 25 30 63.95
These reels are designed to provide a controlled water supply to suppress any possible fire risk involving Class A combustible solids.
Either the water mains or water tanks can be utilised to provide the pressurised supply required.
Manual Fixed, with Hose
0463
FHRAMF19 19 30 178.50FHRAMF25 25 30 197.15
Tech Sheet 60138
Manufactured to comply with the stringent requirements set out under BS EN 671-1, the hose reels are extremely durable and offer superb performance to the operative. The side plates are protected with a polyester powder coating that complies with the 240 hour salt spray test requirements specified by ISO 9227.
Hose Reel Flow Rates:• 3/4” – 27 lpm• 1” – 35 lpm
Fire Hose Reel Assembly
All reels come complete with wall mounting brackets
Professional Window Cleaning Equipment
Kits contain:• 1 x male tap connector to fit standard 1/2” and 3/4” tap threads• 1 x hose assembly (1 metre) with tap and stop connectors to
connect the mains water to the filter• 1 x filter with garden hose type inlet/outlet connectors• 1 x hose assembly (10 metres) with tap and stop connectors
to connect filter to the telescopic pole• 1 x telescopic pole with flow control valve, Lite-5® pole
tubing and angled crank to connect to brush• 1 x window cleaning 36cm brush with a pair of fanjet
nozzles and tubing to connect to the pole hose• 1 x TDS meter for testing water quality and
checking state of the resin medium
Up to 400 Litres of Pure De-ionised Water
0476
ClosedHeight
(Metres)
ExtendedHeight
(Metres)
PoleWeight
(kg) FT012-252-022 1.8 5.2 1.3 230.00FT012-267-022 1.8 6.7 1.7 258.00FT012-294-022 1.8 9.4 2.9 324.00
Mobile Carry KitTech Sheet 60355
Up to 2,000 Litres of Pure De-ionised Water
0476
ClosedHeight
(Metres)
ExtendedHeight
(Metres)
PoleWeight
(kg) FT072-252-022 1.8 5.2 1.3 312.00FT072-267-022 1.8 6.7 1.7 340.00FT072-294-022 1.8 9.4 2.9 404.00
Mobile Trolley KitTech Sheet 60356
Up to 8,000 Litres of Pure De-ionised Water
0476
ClosedHeight
(Metres)
ExtendedHeight
(Metres)
PoleWeight
(kg) FT092-252-022 1.8 5.2 1.3 752.00FT092-267-022 1.8 6.7 1.7 780.00FT092-294-022 1.8 9.4 2.9 844.00
Mobile Starter KitTech Sheet 60354
See page 1354 for the full range
See page 1530 for the full range
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 12
– H
ose
, Tub
ing
& C
oup
ling
s
27
Clamps & Hose Clips
Jubilee® P ClipsQuality assurance: DIN3016.Corrosion resistance: 72-hour NSS test.Material: mild steel zinc-plated.
Working Temperature:-50ºC to +150ºC
Tech Sheet 60241
Mild Steel Zinc Protected (W1), EPDM Liner, M5
6666
JPC005MS 5 0.75JPC006MS 6 0.75JPC008MS 8 0.80JPC009MS 9 0.80JPC010MS 10 0.80JPC012MS 12 0.85JPC013MS 13 0.90JPC014MS 14 0.90JPC015MS 15 0.95JPC016MS 16 0.95JPC017MS 17 1.00JPC018MS 18 1.00JPC019MS 19 1.00JPC020MS 20 1.00JPC021MS 21 1.05JPC022MS 22 1.05JPC025MS 25 1.15JPC027MS 27 1.20JPC028MS 28 1.20JPC029MS 29 1.25JPC030MS 30 1.30JPC035MS 35 1.40JPC040MS 40 1.50JPC044MS 44 1.55
Jubilee® P Clip KitsContains 110 x P clips of the most accepted sizes in a versatile, re-usable plastic container suitable for any challenging environment.Jubilee P clips are manufactured from one piece of steel band with an EPDM rubber liner.
Tech Sheet 60243
P Clip Kits
6666
JPCK110MS Mild Steel 131.85JPCK110SS 304 Stainless Steel 177.55
Jubilee® O Clip KitsA useful and convenient pack for the most popular sizes of double ear clips.The kit comes with 175 mild steel & 155 stainless steel assorted O clips.
Tech Sheet 60242
O Clip Kits
6666
OK175MS Mild Steel 86.30OK155SS 304 Stainless Steel 241.60
304 Stainless Steel, 11mm Wide, W4
6666
CAS050SS 35 50 6.15CAS075SS 45 75 6.25CAS100SS 50 100 6.40CAS120SS 50 120 6.80CAS150SS 50 150 7.20CAS175SS 50 175 7.55CAS200SS 50 200 7.95CAS225SS 50 225 8.35CAS250SS 50 250 8.70CAS275SS 50 275 9.15CAS300SS 50 300 9.50CAS330SS 50 330 9.90CAS355SS 50 355 10.25CAS380SS 50 380 10.75CAS405SS 50 405 11.55CAS455SS 50 455 12.10CAS505SS 50 505 12.85CAS555SS 50 555 13.60CAS605SS 50 605 14.65CAS710SS 50 710 15.90CAS810SS 50 810 17.65CAS910SS 50 910 19.00CAS965SS 50 965 20.15
See pages 1420-1426 for the full range
Sec
tio
n 13
– C
lam
ps
& C
lips
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
28
Pressure Spray Equipment
Pressure Sprayers
Product Description• Tank: Plastic with filling scale• Seals FPM (Viton®)• Nozzle: Plastic, adjustable• Plastic jacket wand to protect the
non-return valveApplications• Foaming Cleaning industry
Special Features of the Product• Safety valve• Specially coated spring• Application: pH 1 - 9*
Tech Sheet 60140
FOAMER, Heavy Duty Hand Pump
0465
3132FO 1.5 Litre Polyethylene 25.10
Large selection of models for various application are available on request
Mesto is a European market leading manufacturer of professional cleaning equipment and has been providing innovation for the industry since 1919
Working Temperature:+30°C
Working Pressure:3 bar
Before use, check carefully whether the material is resistant to the liquid being used.
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 16
– W
ash
Do
wn
& F
uelli
ng
Compression Sprayers
Device description:• Tank: Stainless steel• Carried on the back – padded
carrying straps• Seals: FPM (Viton®)• Nozzle: Brass flat jet nozzle with
fine filter• Spray wand: Brass 50cm, 360°
rotatable• Hose: Spiral hose 2.5 m with safety
interlockApplications:• Construction work• Cleaning industry• Professional pest control
Special features of the product:• Safety valve and pressure gauge are
exchangeable• Spare parts compartment on the
device• Pump holder• Spray and extension wand bracket• Funnel cover
Max Temperature:+50°C
Working Pressure:6 bar
Tech Sheet 60143
INOX PLUS, Stainless Steel
0465
3615P 10 Litre Stainless Steel 323.45
Mesto is a European market leading manufacturer of professional cleaning equipment and has been providing innovation for the industry since 1919
See pages 1522-1523 for the full range
29
Fuelling Equipment & Accessories
Sec
tio
n 16
– W
ash
Do
wn
& F
uelli
ng
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Oil Pumps
Oil Pump System
0074
J100TDG 18 344.50J10TDGD 18 451.00
Oil Delivery System
0225
JOS200 Oil Delivery System with Hose Reel 1123.25JOS100 Oil Delivery System without Hose Reel 785.85C808-OKDD Drum Mounted Oil Dispensing Kit 724.70C080-OKMD Drum Mounted Oil Dispensing Kit with Digital Gun 824.40
Oil DeliveryMobile oil dispensing units suitable for dispensing oil at medium/high viscosity, for mobile installations and fixed systems at medium distances. The drum trolley allows the system to be moved around the workshop with ease, giving increased efficiency. All items are available separately or in kit form.
Tech Sheet 60363
Tech Sheet 60365
Oil Delivery System
0225
ZOLP16 16 120.30
JOS200
C080-OKMD
Self-contained oil pump supplied with a 16 litre (4.23 gallon) container with handle. Fitted with a 48”(4ft) fuel-resistant soft PVC hose with nozzle for clean discharge.Features:• 16 litre powder-coated container• Variable handle setting for light
or heavy fluids• Recommended for transmission
differentials and heavier oils• Not suitable for water-based fluids
or other corrosive media
High-pressure positive displacement meter suitable for in-line and end of line applications. Recommended use with oils that has a viscosity up to 5000 cSt, diesel and bio-diesel
Working Temperature:-10°C to +65°C
Maximum Working Pressure:70 bar
Tech Sheet 60367
Digital
0122
ZOM20 1/2” 30 70 225.55
Fuelling Meters
Grease GunsProfessional 18V cordless grease gun which can develop up to 10,000psi of pressure. Features three-way loading, one hour fast charge, spare battery and a built in LED light which illuminates your work area. All supplied in a robust carry case.
Tech Sheet 60360
Standard Cordless, Battery Operated
0225
RB1958 18V 333.90
See pages 1534-1548 for the full range
30
Automatic Lubricant Dispensers
Single-point Electro-Luber™ SeriesThe classic Electro-Luber was developed in 1982. It uses an electrochemical reaction which converts electrical energy into safe, inert, nitrogen gas. The gas is trapped in a hermetically sealed bellows-type gas chamber. As the gas is produced, pressure builds up in the bellows and is applied against a piston which pushes the lubricant out. The Electro-Luber can be set to empty in intervals varying between 15 days to 1 year simply by the selection of the appropriate DIP switch. The selection can be changed, or the unit turned off, at any time.Features• Self-contained, stand-alone, automatic single-point lubricator• Continuous lubrication using safe, inert, nitrogen gas• Continuous lubrication of bearings removes and protects foreign
matter from entering, slows oxidation, aids in dissipating heat, and ensures a constant supply of fresh lubricant
• ATEX certified Intrinsically Safe for use in hazardous areas• Multiple settings to empty from 15 days to 1 year• Suitable for indoor and outdoor use• May be remotely mounted up to 1 metre• Can be filled with customer-specified lubricantAdvantages• Number one on the market for reliability: fail rate less than 0.01%
(some well known brands are as high as 20% fail rate, especially in tougher conditions)
• Number one electro-chemical lubricator in temperature range: -40°C to +55°C, and by far the most trusted to work at temperatures below zero.
• Best water resistance of any unit and submersible to 10m depths• Intrinsically safe, ATEX certified, CE certified, ISO 9001: 2008 certified
Working Temperature:-40°C to +55°C
Maximum Working Pressure:4 bar
Page Tech Sheet 60407
Gas-driven Lubricant Dispenser, Multipurpose Grease, EP2
0483
ELS-60-MP 1/4” 60cc 15 Days to 12 Months 51.00ELS-125-MP 1/4” 125cc 15 Days to 12 Months 54.75ELS-250-MP 1/4” 250cc 15 Days to 12 Months 76.85ELS-475-MP 1/4” 475cc 15 Days to 12 Months 125.25
Gas-driven Lubricant Dispenser, Food Grade Grease
0483
ELS-60-FG 1/4” 60cc 15 Days to 12 Months 51.60ELS-125-FG 1/4” 125cc 15 Days to 12 Months 56.00ELS-250-FG 1/4” 250cc 15 Days to 12 Months 79.35ELS-475-FG 1/4” 475cc 15 Days to 12 Months 130.25
Gas-driven Lubricant Dispenser, High Temperature Grease
0483
ELS-60-HT 1/4” 60cc 15 Days to 12 Months 51.75ELS-125-HT 1/4” 125cc 15 Days to 12 Months 56.25ELS-250-HT 1/4” 250cc 15 Days to 12 Months 79.85ELS-475-HT 1/4” 475cc 15 Days to 12 Months 131.25
Gas-driven Lubricant Dispenser, High Pressure Grease
0483
ELS-60-HP 1/4” 60cc 15 Days to 12 Months 51.60ELS-125-HP 1/4” 125cc 15 Days to 12 Months 56.00ELS-250-HP 1/4” 250cc 15 Days to 12 Months 79.35ELS-475-HP 1/4” 475cc 15 Days to 12 Months 130.25
See pages 1553-1555 for the full range
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 16
– W
ash
Do
wn
& F
uelli
ng
31
Air Tools
Impact WrenchesTech Sheet 60251
1/2” Composite Impact
0219
CP7748 267.85
Tech Sheet 60195
3/8” Compact Impact
0219
CP7731 212.90
1/2”Compact Impact
0219
CP7732 211.90
3/4” Super Duty
0219
CP772H 628.50
1” Heavy Duty
0219
CP7782-6 813.10
Tech Sheet 60252
Tech Sheet 60253
Tech Sheet 60196
Drills
3/8” Reversible Pistol Drill
0219
CP9790 144.35
Riveters
General Purpose Riveter
0219
CP9882 166.25
Tech Sheet 60255
Tech Sheet 60205
Ratchet
1/2” Ratchet
0219
CP886H 126.15
Tech Sheet 60202
Grinders
5” Angle Grinder
0219
CP9121AR 284.65
Tech Sheet 60204
Angle Impact Wrenches
3/8” Angle Impact Wrench
0219
CP7727 328.30
1/2” Angle Impact Wrench
0219
CP7737 328.33
Cordless Electrical Impact Wrench Kits
1/4” Cordless Impact Wrench Kit
0219
CP8818 PACK 272.45
3/8” Cordless Impact Wrench Kit
0219
CP8828 PACK 565.15
Tech Sheet 60197
Tech Sheet 60254
Tech Sheet 60198
Tech Sheet 60199
1/2” Cordless Impact Wrench Kit
0219
CP8848 PACK 796.40
Tech Sheet 60200
Hammer Kit
Hammer Kit, Heavy Duty
0219
CP7110 KIT 114.70
Tech Sheet 60207 Cordless
Electrical DrillTech Sheet 60203
3/8” Cordless Drill
0219
CP8528 PACK 284.35
See pages 1586-1589 for the full range
Sec
tio
n 17
– A
ir T
oo
ls
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
32
•• • • • •••• ••• •• • • •• • • • •• • • •••• • • • •••• ••• •• • • •• • • • •• • • ••Spanners• 19, 22, 24, 27 30 and 32mm• Cr-V material• Fine polished• Tidy roll pouch• 60-72 T
Ratchet Spanner Set, 6 Pieces
0455
HKSPAR1061 19-32mm 78.15
• Cr-V material• Chrome plated• Matt finish
Individual Combination Spanners
0455
HCSPA061 6mm 101 1.45HCSPA071 7mm 111 1.50HCSPA081 8mm 121 1.55HCSPA091 9mm 131 1.75HCSPA101 10mm 141 1.85HCSPA111 11mm 152 2.00HCSPA121 12mm 161 2.10HCSPA131 13mm 172 2.25HCSPA141 14mm 183 2.30HCSPA151 15mm 191 2.65HCSPA161 16mm 201 2.85HCSPA171 17mm 211 2.95HCSPA181 18mm 221 3.30HCSPA191 19mm 231 3.40HCSPA201 20mm 242 3.90HCSPA211 21mm 253 4.05HCSPA221 22mm 262 4.35HCSPA241 24mm 287 5.90HCSPA271 27mm 331 8.10HCSPA301 30mm 384 10.05HCSPA321 32mm 405 11.25HCSPA361 36mm 460 17.85HCSPA381 38mm 460 18.65HCSPA411 41mm 500 21.45
Socket Drives• 1/4”: 158mm length• 3/8”: 205mm length• 1/2”: 260mm length• CR-V + Cr-Mo material
Ratchet Wrench
0455
HRTH0814 1/4” 8.30HRTH0838 3/8” 11.20HRTH0812 1/2” 15.15
• 7” (180mm)• High leverage• Saving 30% strength required compared to
standard pliers• TPR hard-wearing handle• Cr-V material• Black finish
Cutting Pliers
0455
HHLDCP28180 7” Diagonal Blade 6.05
• Cutting area: 240mm²• Blade: Cr-Mo• Heat-treated body• Induction quenched cutting edges• Used for cutting copper and aluminium cable• Not for cutting ACSR, wire rope, steel
or self-supporting strand
Cable Cutter
0455
HCCB20124 24” 15.80
Tool Sets• Plastic moulded case
• 1/2” ratchet wrench, soft grip handle, 45T
• 18 x 1/2” sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30 and 32mm
• 1/2” extension bar 250mm (10”)
• 1/2” universal joint• 2 x 1/2” spark plug
socket• 1/2” x 3/8” three-way
adaptor
• 1/4” ratchet wrench, soft grip, 45T
• 13 x 1/4” sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm
• 1/4” extension bar: 100mm (4”)
• 1/4” sliding T bar• 1/4” universal joint
• 8 x combination spanners: 6, 8, 10, 12, 14, 15, 17, 19mm
• 300g machinist hammer
• 7” combination pliers• 6” long nose pliers• SL6.5 x 100mm and
PH2 x 100mm screwdrivers
• 14 bit sockets: T10, T15,T20, T25, T27, T30, T35, SL4, SL5.5, SL6.5, PH1, PH2, PZ1 and PZ2
• 9 x metric allen keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
77 Pieces
0455
HKTHP20771 118.90
Hammers• 40mm diameter head• Fiberglass handle
Dual Plastic & Rubber Mallet
0455
HRPH8140 40mm Head 7.30
• All steel drop-forged• Heat treated• 20oz• Anti-shock handle
Claw Hammer, All Steel
0455
HCH0820 560 Grams 13.70
Pliers
See pages 1611-1622 for the full range
33
Professional Tools
Pipe Wrenches
Heavy-duty Pipe Wrenches
0494
31020 50 350 14 1.6 65.7031025 65 450 18 2.6 95.4031030 80 600 24 4.4 176.60
Aluminium Pipe Wrenches
0494
31095 50 350 814 1.1 119.9031100 65 450 818 1.7 148.0531105 80 600 824 2.7 235.35
Professional Tools
Pipe/Tube Cutting & Preparation
Page Tech Sheet 60451
Enclosed Feed Tubing Cutters, X-CEL Features, for Copper Tube
0494
66737 6-35mm Enclosed Feed Cutter 150L 0.44 62.7533055 6-60mm Ratcheting Encl. Feed Cutter 205L 0.91 176.40
3.11
®
PIPE/TUBE CUTTING & PREPARATION
Enclosed Feed Tubing Cutters with New X-CEL Features • Telescoping feed screw design keeps the cutter at the same length regardless of tubing diameter –
good for tight spaces.• Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-
flare cuts, and a fold-away reamer.• Now includes X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.• Made from high-strength zinc alloy.• Spare cutter wheel included in the knob.• Cuts hard / soft copper, aluminium, brass and multilayer tubes.• Model 205 / 205S have quick acting mechanism for faster size adjustments.
Catalog No.
Model No. Description Std.
WheelCapacity Weight Std.
Packmm lb. kgFor Copper Tubing
66737 150L Enclosed Feed Cutter E-3469 6 - 35 1 0,44 6
33055 205* Ratcheting Encl. Feed Cutter E3469 6 - 60 2 0,91 1
For Steel Tubing
66742 150LS Above with Heavy Duty Wheel E4546 6 - 35 11⁄8 0,47 6
33070 205S** Above with Heavy Duty Wheel E-4546 6 - 60 2 0,91 1
* Model 205 has an additional quick-acting mechanism** Model 205S is suitable for stainless steel.
X-CEL® Means SpeedMany of our most popular tubing cutters now include several X-CEL features to make your job quicker and easier.
• X-CEL Knob – cut tubing more quickly and easily with our larger, more ergonomic designs.• X-CEL Wheel Pin – change your cutter wheel quickly using our new ball detent design…no tool needed…no lost clips!• Spare cutter wheels included for maximum uptime.
Spare wheel included in knob
X-CEL Knob = quicker cut
X-CEL Pin = quicker wheel change
Model 205
Fold-in reamer
Grooved roller
Screw Feed Tubing Cutters with New X-CEL Features• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.• Now includes X-CEL Knob for quicker cutting.• Models 10, 15 and 20 feature a convenient fold-away reamer.• Models 65S and 35S are specially designed for stainless steel tubing. Includes 12x (65S) / 6x (35S)
individual bearings and a heavy duty cutter wheel to make stainless cutting easier. • Models 65S features a quick-acting mechanism.
Catalog No.
Model No. Description Std.
WheelCapacity Weight Std.
Packmm lb. kg32910 10 Screw Feed Cutter F-158 3 - 25 7⁄8 0,40 632915 10S Above w/H-D Wheel (for steel) E-1240 3 - 25 7⁄8 0,40 632920 15 Screw Feed Cutter F-158 5 - 28 1⁄2 0,68 632925 15S Above w/H-D Wheel (for steel) E-1240 5 - 28 1⁄2 0,68 632930 20 Screw Feed Cutter F-158 16 - 54 13⁄4 0,79 132935 20S Above w/H-D Wheel (for steel) E-1240 16 - 54 13⁄4 0,79 132940 30 Screw Feed Cutter E-2558 25 - 79 31⁄2 1,60 132950 30S Above w/H-D Wheel (for steel) E-2191 25 - 79 31⁄2 1,60 197212 15-SI Stainless Steel Cutter E-1525 5 - 28 11⁄2 0,68 129963 35S Stainless Steel Cutter E-635 6 - 35 7⁄8 0,40 131803 65S Stainless Steel Quick-Acting Tubing
CutterE-635 6 - 65 11⁄2 0,68 1
Model 15
Spare wheel included in knob
X-CEL Knob = quicker cut
No. 65S
Model 150L
KNOB – For Quicker Cutting
PIN – For Quicker Wheel Change
SPARE WHEEL IN KNOB
Model 690-I Power Drive
0494
44943 1/8” to 2” Machine with BSPT Dies 690-C 25 115V 1835.3044948 – Machine Only 690 8.5 115V 1488.15
Threading Equipment
Pipe Bending Equipment
600 Series Heavy-duty Instrument Benders
0494
38053 6 16 606M 0.76 203.6038058 10 24 610M 1.84 276.0538063 12 38 612M 2.76 345.60
Press Tools
Standard Corded Press Tool, 32 kN
0494
43283 10-108mm RP 340-C, RP 340-C 8.2 230V 2243.00 Power Adaptor & Case
See pages 1623-1628 for the full range
Sec
tio
n 18
– T
oo
ls, H
ard
war
e &
PP
E
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneaumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
34
Power Management
Lighting EquipmentWork light with 3W single strip COB LED which produces an exceptionally bright floodlit area. Also includes a 2.4W LED end light which provides an additional directional/torch function.
Tech Sheet 60389
Angled Rechargeable Work Light
0478
J2500-HLI 63.10
Work light with 15 high output SMDs and two power settings. Setting 1 is exceptionally bright, giving approximately 600 lumens with a battery life of 4 hours. Setting 2 will reduce the light output but increase the run time to 7 hours. The built-in battery monitor in the handle gives a clear visual indication of battery status.
Tech Sheet 60390
Ultra Slim Rechargeable Work Light
0478
J3500-SMD 50.20
Power Management
A six SMD work, flood and torch light, complete with hanging hooks and magnets for complete operator versatility. • Six-position 180 degree cam• USB rechargeable• Foldable
Tech Sheet 60391
Rechargeable Work Light
0478
J1800 37.35
Engineer’s rechargeable LED pen light with a bright light output of approximately 170 lumens through 6 high powered SMDs on the front. An LED end torch gives a focused light source of 70 lumens.
Tech Sheet 60392
Engineer’s Rechargeable Pen Lights
0478
J1200-SMDUSB 31.25
Floodlight with 50 super bright SMDs and three power settings. Setting 1 offers 2,400 lumens with a battery life of 3 hours. Setting 2 offers 1,500 lumens with a battery life of 4.5 hours. Setting 3 provides 800 lumens with a battery life of 7 hours.
Tech Sheet 60393
Rechargeable Floodlight
0478
JBSFL25 127.45
See pages 1629
Tools, Hardware & PPE
Air Tools
Wash Down & Fuelling
Blow Guns & Vacuum
Sprays & Adhesives
Clamps & Clips
Hose, Tubing & Couplings
Malleable Iron
Stainless Steel
Adaptors & Fittings
Ring Main Systems
Valves
Pneumatic & Vacuum Equipment
KELM™ Pneumatics
Ind. Air Prep., Monitor & Test
Pneumatic QRC
Hydraulic QRC
Hydraulics
Sec
tio
n 18
– T
oo
ls, H
ard
war
e &
PP
E
top related