necto 16 training 18 access security
Post on 13-Jan-2017
19 Views
Preview:
TRANSCRIPT
Necto 16 Training Necto Access Security
Objectives• By the end of this lesson you will be able to perform Necto
Access Security setups• Necto security• Windows security• Mixed security• No Security
Agenda•Necto Security Administration•Allowing Necto Access from the web
Necto Security Administration
Necto Access Control
• Click to move in and out of Necto Management
• Access is controlled in 2 places
Necto Security Administration
Necto Security Administration # 2
Default is to inherit permissions from Administration
Changes to Authentication Type here will only be relevant when using component mode.
Allowing Necto access from the Web
Necto from the World Wide Web• You can allow people from the internet to access Necto• Necto in your DMZ• Necto site requires an IP address the world can access• Necto will use Anonymous Access in IIS• Get a Full DMZ setup document from our support site
http://support.panorama.com
Anonymous Authentication
Set the 3 highlighted items to use Anonymous authentication
Make sure Authentication Type is set to Necto in Administration before doing this!
Summary• In this lesson you have learned to Setup the Authentication
types:•Windows•Necto•Mixed
• Allow users from outside the domain to access Necto.
Thank you, any questions?
top related