ncsli te2018 ad-spread 111617 timmons, the modal shop ... instructor: patrick timmons, the modal...

NCSL INTERNATIONAL | 303-440-3339 | NCSLI.ORG5766 CENTRAL AVENUE, SUITE 150 | BOULDER, COLORADO 80301

Jacob Ricker, NIST (right)

Dr. Jun Bautista, American Gage

Adam Fleder, Tegam

Jim Salsbury PhD, Mitutoyo

Scott Mimbs, American Association for Laboratory Accreditation (A2LA)

PRICING AND REGISTRATIONTraining Member Non-Member

1/2-Day Course (4 hours) $180 $205

1-Day Course (8 hours) $360 $410

2-Day Course (16 hours) $720 $820

Registration Includes:• Monday Evening Reception, Materials Bag, Continental Breakfast, Lunch

and Expert Measurement Training for that day!

Discounts:• 10% discount when registering 3 or more attendees from your company.

Must call the NCSLI Business office at 303-440-3339 to register and receive discount.

• Non-Members: Join NCSL International and receive member pricing on your Technical Exchange registration.

Join Us for Three Days of Measurement Training Conducted by Experts in the Field of Metrology!

FEBRUARY 26–28, 2018

The NCSLI Technical Exchange will build and enhance specific hands-on skills in the calibration of measurement and test equipment. This three-day training will also teach best practices along with introducing new and innovative calibration hardware, software and calibration services. Each training session is taught by measurement science experts from throughout the industry.

Visit NCSLI.ORG for more information.

TE-1 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)ISO/IEC 17025:2017 Gap in EnglishInstructor: Tim Osborne, American Association for Laboratory Accreditation (A2LA)

TE-2 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)Temperature and Humidity: Chamber Use and CalibrationInstructor: Dr. Jun Bautista, American Gage

TE-3 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)RF & Microwave Measurement BasicsInstructor: Ronald Ginley, National Institute of Standards and Technology (NIST)

TE-4 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)Electrical Metrology BasicsInstructor: Michael Johnston, Fluke Calibration

TE-5 | Monday & Tuesday, February 26 & 27 8:00 AM - 5:00 PM | 2-Day (16 Hours)Selection, Calibration, and Use of Contact ThermometersInstructors: Dawn Cross, National Institute of Standards and Technology (NIST); Karen Garrity, National Institute of Standards and Technology (NIST)

Tim Osborne, American Association for Laboratory Accreditation (A2LA)

Ronald Ginley, NIST

Hy D. Tran, PhD, PE, Sandia National Laboratories

Jonathan Bailey, Transmille

2018 TECHNICAL EXCHANGE HOTEL INFORMATION The Florida Hotel & Conference Center1500 Sand Lake Road, Orlando, FL 32809

NCSL International Room Rate: $149

Rate Ends: January 29, 2018

Call for Reservations: 1-800-588-4656

TECHNICAL EXCHANGE MEASUREMENT TRAINING PROGRAM

VISIT NCSLI.ORG FOR UPDATES AND CURRENT INFORMATION

TE-6 | Monday & Tuesday, February 26 & 27 8:00 AM - 5:00 PM | 2-Day (16 Hours)Pressure and Vacuum MetrologyInstructors: Jacob Ricker, National Institute of Standards and Technology (NIST); Julia Scherschligt, National Institute of Standards and Technology (NIST)

TE-7 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)Realization and Dissemination of Mass in the “New SI”Instructor: Patrick Abbott, National Institute of Standards and Technology (NIST)

TE-8 | Monday & Tuesday, February 26 & 27 8:00 AM - 5:00 PM | 2-Day (16 Hours)NIST Gage BlockInstructor: Eric Stanfield, National Institute of Standards and Technology (NIST)

TE-9 | Monday, February 26 8:00 AM - 5:00 PM | 1-Day (8 Hours)Calibration of Torque InstrumentsInstructor: Hy Tran PhD, Sandia National Laboratories

TE-10 | Tuesday & Wednesday, February 27 & 28 8:00 AM - 5:00 PM | 2-Day (16 Hours)Measurement Decision Risk for Conformity AssessmentInstructor: Scott Mimbs, American Association for Laboratory Accreditation (A2LA)

TE-11 | Tuesday, February 27 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours)Low Power, High Frequency Power Sensor CalibrationInstructor: Adam Fleder, Tegam

TE-12 | Tuesday, February 27 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours)Oscilloscope FundamentalsInstructor: John Meier, National Instruments

Patrick Timmons, The Modal Shop (right)

Michael Johnston, Fluke Calibration

Julia Scherschligt, NIST

Scott Crone, Ametek (right)

TECHNICAL EXCHANGE MEASUREMENT TRAINING PROGRAM

NCSL INTERNATIONAL | 303-440-3339 | NCSLI.ORG | 5766 CENTRAL AVENUE, SUITE 150 | BOULDER, COLORADO 80301

THANK YOU 2018 SPONSORS

TABLETOP EXHIBITS AND SPONSORSHIPS AVAILABLE

TE-13 | Tuesday, February 27 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours)Risk Based Thinking in MetrologyInstructor: Andy Oldershaw, National Research Council Canada (NRC)

TE-14 | Tuesday, February 27 8:00 AM - 5:00 PM | 1-Day (8 Hours)Improved Performance via Process MappingInstructor: Dean Williams, Duke Energy

TE-15 | Tuesday, February 27 8:00 AM - 5:00 PM | 1-Day (8 Hours)Geometric Dimensioning & Tolerancing (GD&T) Application to Gage Calibration RequirementsInstructor: Tony Bryce, Sandia National Laboratories

TE-16 | Tuesday, February 27 1:00 PM - 5:00 PM | 1/2-Day PM (4 Hours)Basic Concepts of Validation, Metrological Traceability and Measurement UncertaintyInstructor: Andy Oldershaw, National Research Council Canada (NRC)

TE-17 | Tuesday, February 27 1:00 PM - 5:00 PM | 1/2-Day PM (4 Hours)High Power Measurement and Wattmeter CalibrationInstructor: Adam Fleder, Tegam

TE-18 | Tuesday, February 27 1:00 PM - 5:00 PM | 1/2-Day PM (4 Hours)Introduction to Calibration: Handheld DMM’sInstructor: Jonathan Bailey, Transmille

TE-19 | Wednesday, February 28 8:00 AM - 5:00 PM | 1-Day (8 Hours)ISO/IEC 17025:2017 Gap in SpanishInstructor: Marcela Shkolnik, American Association for Laboratory Accreditation (A2LA)

TE-20 | Wednesday, February 28 8:00 AM - 5:00 PM | 1-Day (8 Hours)Temperature and Humidity: Chamber Use and CalibrationInstructor: Dr. Jun Bautista, American Gage

TE-21 | Wednesday, February 28 8:00 AM - 5:00 PM | 1-Day (8 Hours)Good Weighing PracticesInstructor: Ian Ciesniewski, Mettler Toledo

TE-22 | Wednesday, February 28 8:00 AM - 5:00 PM | 1-Day (8 Hours)Introduction to Dimensional CalibrationInstructor: Jim Salsbury, PhD, Mitutoyo America

TE-23 | Wednesday, February 28 8:00 AM - 5:00 PM | 1-Day (8 Hours)RF & Microwave Measurement BasicsInstructor: Ronald Ginley, National Institute of Standards and Technology (NIST)

TE-24 | Wednesday, February 28 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours)Theory and Operation of Dry-Block Temperature CalibratorsInstructor: Scott Crone, Ametek

TE-25 | Wednesday, February 28 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours)Dynamic Sensors and CalibrationInstructor: Patrick Timmons, The Modal Shop

Andy Oldershaw, NRC

Dean Williams, Duke Energy

Ian Ciesniewski, Mettler Toledo

Tony Bryce, Sandia National Laboratories

VISIT NCSLI.ORG FOR UPDATES AND CURRENT INFORMATION

TECHNICAL EXCHANGE MEASUREMENT TRAINING PROGRAM