multiphysics modeling of electro-optic devices - cn.comsol.commultiphysics modeling of electro-optic...

Multiphysics Modeling of Electro-Optic Devices

James E. Toney

SRICO, inc.

October 13, 2011

Presented at the 2011 COMSOL Conference

Outline

• Combined RF-Optical mode analysis

– RF waveguide mode

– Optical waveguide modes

– Electro-optic interaction

• Combined wave propagation

– Paraxial optical propagation

– DC modulation

– Time-dependent RF modulation

The Workhorse Electro-Optic Device: Mach-Zehnder Interferometer

Df=p Df=0

Coplanar Waveguide Structure

Optical waveguides

Electrodes

Buffer Layer

Substrate

Geometry for RF and Optical Mode Solving in Comsol

air

LiNbO3

Au electrodes

SiO2

buffer

layer Initial dopant regions

w= 8 mm, g=28 mm, tm = 30 mm, tb = 1 mm, eb = 3.8, esub =[28,44,44] Optical waveguide profile is defined by diffusion equation

PEC boundary

Electric Displacement Field (Dx) of RF Mode

RF Mode Effective Index and Loss vs. Frequency

a= -2pf Im(neff)/c

Characteristic Impedance vs. Frequency

Z0 = 2 P / |I|2

Optical Waveguide Mode Splitting with Applied E-Field

Dno/e= -½ no/e3ri3 Ex

Velocity Matching Bandwidth and Half-Wave Voltage vs. Device Length

fc = c / (2 nm L d) d = 1 - (no/nm) Vp = l / [2 (Dn/V) L] [does not incorporate electrode losses]

Simplified 2D MZI Model with DC Electrodes

V=0

V=24 V

• Scalar Paraxial Wave Equation for Optics •Electrostatics •Stationary Solution

Transmission of 2D MZI Model vs. DC Voltage

Simplified 2D MZI Model with RF Electrodes

• Time-Dependent EM Wave Propagation for RF •Scalar Paraxial Wave for Optics (stationary solution at each time step)

Input/Output Waveforms @fin = 1 GHz

Conclusions

• Comsol Multiphysics provides complete capabilities for modeling of electro-optic devices

• With adequate computational resources, 3D EO propagation models are possible