mud flaps catalog43ndmu46qa752w0lx819ur60-wpengine.netdna-ssl.com/wp-content/... · armor guard mud...
Post on 23-Apr-2018
353 Views
Preview:
TRANSCRIPT
MUD FLAPS CATALOG
RoadChoice.com
Table of Contents
Visit our website at RoadChoice.com.
DOMESTIC AND ECONOMY IMPORTED MUD FLAPSArmor Guard Mud Flaps . . . . . . . . . . . . . . . 3
Chevron Mud Flaps . . . . . . . . . . . . . . . . . . . 3
Standard Mud Flaps . . . . . . . . . . . . . . . . . . 4
Xtreme Mud Flaps . . . . . . . . . . . . . . . . . . . 5
Anti-Spray Mud Flaps . . . . . . . . . . . . . . . . . 6
Raised Molded Mud Flaps . . . . . . . . . . . . . . 8
Tireplast Mud Flaps . . . . . . . . . . . . . . . . . . 9
Specialty Mud Flaps . . . . . . . . . . . . . . . . . 10
Aerodynamic Mud Flaps . . . . . . . . . . . . . . 10
Silkscreened Logo Mud Flaps . . . . . . . . . . 10
Polyguard Mud Flaps . . . . . . . . . . . . . . . . 12
Custom Logo Color Mud Flaps . . . . . . . . . . 14
Mud Flap Proof . . . . . . . . . . . . . . . . . . . . . 15
RUBBER PRODUCTSWheel Chocks . . . . . . . . . . . . . . . . . . . . . 16
Rubber Dock Bumpers . . . . . . . . . . . . . . . 17
Laminated Bumpers . . . . . . . . . . . . . . . . . 20
Door Bumpers . . . . . . . . . . . . . . . . . . . . . 20
MUD FLAP HANGERS AND BRACKETSMud Flap Hangers . . . . . . . . . . . . . . . . . . 21
Mounting Hardware . . . . . . . . . . . . . . . . . 23
Conspicuity Tape . . . . . . . . . . . . . . . . . . . 25
Mud Flap Brackets . . . . . . . . . . . . . . . . . . 26
Light Bars . . . . . . . . . . . . . . . . . . . . . . . . 28
QUARTER FENDER ACCESSORIESQuarter Fender Top Flaps . . . . . . . . . . . . . 29 Quarter Fender Mounting Hardware . . . . . . 29
3Visit our website at RoadChoice.com.
Domestic and Economy Imported Mud Flaps
ARMOR GUARD MUD FLAPSThe Armor Guard splash guard is made from 100% fiber reinforced rubber. The header is molded thicker to resist tearing through nor-mal use. The top corners can be cut to fit the standard 45 degree angle brackets, while the bottom can be cut down when a shorter flap is needed.
High Tear StrengthMADE IN THE USA
Best Flap on the Market!
CHEVRON MUD FLAPOur thin, durable economy mud flap is molded from natural rubber and reinforced with small fibers. It’s less expensive than most, but it has a high tear strength!
Part # DescriptionWeight Per Pair
Replaces
MF2424CD 24” x 24” Chevron Domestic 12 lbs. 062424
MF2430CD 24” x 30” Chevron Domestic 14 lbs. 062430
MF2436CD 24” x 36” Chevron Domestic 16 lbs. 062436
Part # DescriptionWeight Per Pair
MF2424C 24” x 24” Chevron Economy Mud Flap 10 lbs.
MF2430C 24” x 30” Chevron Economy Mud Flap 12 lbs.
MF2436C 24” x 36” Chevron Economy Mud Flap 14 lbs.
A blend of post cured SBR with naturalrubber—plus small amounts of fiber—
is used to create the most durable and economical mud flap.
ReinforcedRibs
4 Visit our website at RoadChoice.com.
Standard Mud Flaps
5/16” STANDARD MUD FLAPSThe finest material available is used to mold our standard mud flaps. These are the most popular mud flaps for logo use.
This material also meets all MIL-SPEC for Military Contractors.
Our 5/16” Standard Mud Flaps are slightly heavier than our Chevron Mud Flaps. Most customers prefer the standard flap for their custom logos.
Molded and Printed in the USA.
Part # DescriptionWeight Per Pair
MF1217S 12” x 17” Standard Mud Flap 7 lbs.
MF1924S 19” x 24” Standard Mud Flap 11 lbs.
MF2418S 24” x 18” Standard Mud Flap 11 lbs.
MF2424S 24” x 24” Standard Mud Flap 13 lbs.
MF2430S 24” x 30” Standard Mud Flap 15 lbs.
MF2436S 24” x 36” Standard Mud Flap 17 lbs.
DurableA= 7/16”B= 1 1/2”C= 1 1/2”D= 5/16”
5Visit our website at RoadChoice.com.
Xtreme Mud Flaps
XTREME MUD FLAPSOur Xtreme Mud Flap is molded from high tensile strength rubber. Using conveyor belt technology, a wire of nylon sheet is molded into the mud flap for unbeatable greater durability.
• Great for dump trucks and off-road use
• Highest tear strength of any mud flap
• Stiffer flap prevents waving
• Available with silkscreen or raised molded logo
Absolute Toughest Flap on the Market!Replaces: STA-PUT-FLAPS
Part # DescriptionWeight Per Pair
MF2424XD 24” x 24” 3/8” Xtreme Mud Flap 16 lbs.
MF2430XD 24” x 30” 3/8” Xtreme Mud Flap 17 lbs.
MF2436XD 24” x 36” 3/8” Xtreme Mud Flap 19 lbs.
MF2440XD 24” x 40” 3/8” Xtreme Mud Flap 21 lbs.
MF2442XD 24” x 42” 3/8” Xtreme Mud Flap 24 lbs.
Nylon MeshReinforcement
6 Visit our website at RoadChoice.com.
Anti-Spray Mud Flaps
1/2” HEAVY DUTY, ANTI-SPRAY MUD FLAPS
ALL RUBBER QUICK CHANGE, ANTI-SPRAY MUD FLAPS
Part # DescriptionWeight Per Pair
Replaces
MF2424HDD 24” x 24” 1/2” Heavy Duty USA Mud Flap 19 lbs. 082424
MF2430HDD 24” x 30” 1/2” Heavy Duty USA Mud Flap 22 lbs. 082430
MF2436HDD 24” x 36” 1/2” Heavy Duty USA Mud Flap 24 lbs. 082436
Part # DescriptionWeight Per Pair
Replaces
MF2424AS 24” x 24” Quick Change Anti-Spray Mud Flap 18 lbs. 84500
The Heavy-Duty, Anti-Spray Flap is the ultimate flap. The 1/2” thick reinforced rubber gives this flap anti-sail features, and raised knobs on the back side provide anti-spray properties.
The Quick Change Anti-Spray mud flap features easy two-step quick changeability plus finger-like projec-tions that direct spray downward, while the built-in side ridges prevent lateral spray.
• 45-degree angle mount capable
• 30/36 dual mount capable
• Hole at bottom of flap for hook up
• Available with silkscreen or raised molded logo
NOTE: HD series also available importedP/N MF-2424HDP/N MF-2430HDP/N MF-2436HD
Save time and money with two-step Quick Change Mud Flaps!
Step 1: Slip out the old mud flap. Step 2: Slip in the new mud flap.
7Visit our website at RoadChoice.com.
Quick Mount Mud Flaps
ANTI-SAIL QUICK MOUNT MUD FLAPS
RAINTRAPPER MUD FLAPSThe Raintrapper Flap is manufactured in the U.S.A. This is the ultimate anti-spray mud flap for the heavy-duty trucking industry, featuring finger-like projections that direct spray downward while built-in side ridges prevent lateral spray.
Part # DescriptionWeight Per Pair
Replaces
MF2430M 24” x 30” 3/8” Quick Mount Mud Flap 20 lbs. 82506
MF2436M 24” x 36” 3/8” Quick Mount Mud Flap 22 lbs. 82504
Part # DescriptionWeight Per Pair
Replaces
MF2430RT 24” x 30” Raintrapper Flap 20 lbs. 84502
Two embedded, all-steel bars resist wind force, even at high speeds. These flaps offer the convenience of quick maintenance combined with the stability of steel reinforcement bars.
Made in the USA.
Profile diagram showingfinger-like projections.
8 Visit our website at RoadChoice.com.
Raised Molded Mud Flaps
STANDARD 5/16” RAISED MOLDED MUD FLAPS
Part # DescriptionWeight Per Pair
MF2424RSM 24” x 24” – 5/16” Standard Black Rubber Mud Flap with One-Color Logo 13 lbs.
MF2430RSM 24” x 30” – 5/16” Standard Black Rubber Mud Flap with One-Color Logo, Dual Mount 15 lbs.
MF2436RSM 24” x 36” – 5/16” Standard Black Rubber Mud Flap with One-Color Logo, Tri-Mount 17 lbs.
Part Number DescriptionWeight Per Pair
MF2424RGM 24” x 24” – 3/8” Fiber Reinforced Black Anti-Spray Rubber Mud Flap with One-Color Logo 16 lbs.
MF2430RGM 24” x 30” – 3/8” Fiber Reinforced Black Anti-Spray Rubber Mud Flap with One-Color Logo, Tri-Mount 18 lbs.
MF2436RGM 24” x 36” – 3/8” Fiber Reinforced Black Anti-Spray Rubber Mud Flap with One-Color Logo, Tri-Mount 20 lbs.
All Raised Molded Flaps Are Made in the USA.Our mud flaps are made from 100% friction-reinforced material
to ensure ultimate tear strength and durability.
Tri-Mountis perfect for dumptrucks and off-road
applications.
Tooling forRaised Molded Flaps
incurs a $300 one-time fee.
9Visit our website at RoadChoice.com.
Tireplast Mud Flaps
TIREPLAST/THERMOPLASTIC MUD FLAPSA combination of recycled tire rubber and plastic, tireplast is environmentally friendly and allows for cus-tom product specifications. A great replacement for most natural and synthetic rubber, tireplast has low- temperature impact toughness, tensile strength, flexibility, and sound deadening capabilities. Tireplast is resistant to many chemicals, including alcohol, anti-freeze, diesel fuel, gasoline, grease, hydraulic oil, kero-sene, motor oil, distilled water, and salt water.
Part # Description Thickness
MF2424TPPSB 24” x 24” 1/4”
MF2430TPPSB 24” x 30” 1/4”
MF2436TPPSB 24” x 36” 1/4”
MF2424TPHDB 24” x 24” 3/8”
MF2430TPHDB 24” x 30” 3/8”
MF2436TPHDB 24” x 36” 3/8”
• Thermoplastic rubber
• Anti-curling attributes of a rubber flap
• Stiff anti-sail features of a poly flap
• Ribbed back for anti-spray
• Also available in angle cut or rounded corners
Made in the USA.
10 Visit our website at RoadChoice.com.
Specialty Mud Flaps
SPECIALITY RUBBER MUD FLAPSMID GUARD MUD FLAPSMid Guard Mud Flaps provide unsurpassed protection from flying gravel, splash, and road spray.
SIDE SHIELDSSide Shields offer ribbed construction to reduce spray from sides of trailers.
AERODYNAMIC G-FORCE MUD FLAPSG-Force Mud Flaps can help save on fuel costs, reduce spray, are anti-sail, resist cracking and tearing in colder temperatures, and offer mounting options for LED lights.
Part # Description Thickness
MF443638 3/8” x 44” x 36” 140002
Part # Description Thickness
MF848S Side Skirt Flap, 8” x 48” Rubber 074807
Part # Description
MF2424GFB 24” x 24” G-Force Flap
MF2430GFB 24” x 30” G-Force Flap
A Must-Have for Dump Trucks!
11Visit our website at RoadChoice.com.
Silkscreened Logo Mud Flaps
SILKSCREENED LOGO RUBBER MUD FLAPS• Multi-color logos with great detail
• Long-lasting urethane paint also used on floors and running tracks that will not wear off
• Fast turnaround (4 weeks)
• No setup charge (one-color logos only; additional charges for multicolor)
MF2430SRC
12 Visit our website at RoadChoice.com.
Polyguard Mud Flaps
POLYGUARD HOT-STAMP LOGO MUD FLAPS• Long-lasting images
• Multicolor
• Made in the USA
• No setup charge on orders over 500 pieces (one-color logos only; additional charges for multicolor)
MF2430PSBRC
Colored Poly Flaps Also Available – 24” x 30” x 3/16” Only
TEAL2430PST
RED2430PSR
BLUE2430PSBL
YELLOW2430PSY
SILVER2430PSS
13Visit our website at RoadChoice.com.
Polyguard Mud Flaps
POLYGUARD STANDARD
1/4” ANTI-SPRAY POLY PLUS
3/8” ANTI-SPRAY POLY PLUS
• 3/16” thick
• Will not crack or curl
• Economical price
• 1/4” thick
• Anti-spray ribbed back
• Medium duty
• 3/8” thick
• Anti-spray ribbed back
• Heavy duty
Part # DescriptionWeight Per Pair
MF2406PSB 24” x 6” Standard Poly – Black 3 lbs.
MF2406PSW 24” x 6” Standard Poly – White 3 lbs.
MF2424PSB 24” x 24” Standard Poly – Black 6 lbs.
MF2424PSW 24” x 24” Standard Poly – White 6 lbs.
MF2430PSB 24” x 30” Standard Poly – Black 8 lbs.
MF2430PSW 24” x 30” Standard Poly – White 8 lbs.
MF2436PSB 24” x 36” Standard Poly – Black 10 lbs.
MF2436PSW 24” x 36” Standard Poly – White 10 lbs.
Part # DescriptionWeight Per Pair
MF2424PPSB 24” x 24” 1/4” Anti-Spray – Black 7 lbs.
MF2424PPSW 24” x 24” 1/4” Anti-Spray – White 7 lbs.
MF2430PPSB 24” x 30” 1/4” Anti-Spray – Black 9 lbs.
MF2430PPSW 24” x 30” 1/4” Anti-Spray – White 9 lbs.
MF2436PPSB 24” x 36” 1/4” Anti-Spray – Black 11 lbs.
MF2436PPSW 24” x 36” 1/4” Anti-Spray – White 11 lbs.
Part # DescriptionWeight Per Pair
MF2424PHDB 24” x 24” 3/8” Anti-Spray – Black 10 lbs.
MF2424PHDW 24” x 24” 3/8” Anti-Spray – White 10 lbs.
MF2430PHDB 24” x 30” 3/8” Anti-Spray – Black 12 lbs.
MF2430PHDW 24” x 30” 3/8” Anti-Spray – White 12 lbs.
MF2436PHDB 24” x 36” 3/8” Anti-Spray – Black 14 lbs.
MF2436PHDW 24” x 36” 3/8” Anti-Spray – White 14 lbs.
14 Visit our website at RoadChoice.com.
Custom Logo Color Mud Flaps
GUIDELINES
RUBBER:
• 50 each / 25-piece minimum order
• Proof must be signed before production can begin
• Lead time: 4-6 weeks
• Two weeks for screen setup
• No setup charge (One color only, additional charge for multicolor)
POLY:
• 50 each / 25-piece minimum order
• Proof must be signed before production can begin
• Lead time: 4-6 weeks
• Two weeks for plate production
• $200 per color plate change
• No setup charge for 500 pieces (One color only, additional charge for multi-color)
ORDERING• Rubber or Polyguard Flaps
• Flap Type
• Flap Size
• Order Quantity
• Flap Color
• Imprint Color(s)
• Custom color available upon request
RUBBER FLAP AND POLY FLAP COLOR CHART
SILKSCREENfor rubber flaps
HOT STAMPSfor poly flaps
Red – Pantone 185 C
Red
P 186 C
Dark Green
P 3435 C
Green
P 348 CMF
Blue
P 2935 C
Yellow
P 116 C
Brown
P 1615 C
Dark Blue
P 2965 C
Orange
P 172 C
Gray
P Cool Gray10 C
Light Blue
P 2925 C
Maroon
P 188 C
Custom Colors Available
$100 per color(Silkscreen & Hot Stamp)
Blue – Pantone 2945 C
Yellow – Pantone 115 C
Green – Pantone 3298 C
Orange – Pantone 1655 C
Gray – Pantone Cool Gray 5 C
15Visit our website at RoadChoice.com.
Mud Flap Proof
MUD FLAP PROOF
Special Notes: __________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
Customer: ______________________________________
Attention: ______________________________________
Flap Style: ______________________________________
Print Style: q Hot Stamp
q Silkscreen
q Raised Molded
Flap Size: _______________________________________
Imprint Color: ___________________________________
Order Quantity: _________________________________
Set Up Fee: ____________________________________
Approved By:
Signature: ______________________________________
Printed Name: __________________________________
Date: __________________________________________
** Signed proof MUST be returned before production can begin. **
16 Visit our website at RoadChoice.com.
Wheel Chocks
WHEEL CHOCKS
WCH2047 – HEAVY DUTY CHOCKWCH2047D – DOMESTIC
• Large zinc-plated eyebolt
• Non-skid bottom
• 8”D x 10”L x 6”HReplaces: 430030
WCH2049 – CONTOUR CHOCK
• Molded handle on the back
• Nylon safety rope on request
• 11 lbs.
• Used for heavy equipment and trucks Replaces: 430040
WCH2055 – STAIR STEP WHEEL CHOCKWCH2055D – DOMESTIC
• Zinc-plated eyebolt
• Sharp steps to grip better
• 9 lbs.
• 8”D x 9”L x 6”H
WCH2048 – HEAVY DUTY CHOCK
• Most popular design
• Zinc-plated eyebolt
• 9 lbs.
• 8”D x 9-1/2”L x 5-3/4”H
WCH2050 – STANDARD UTILITY CHOCK
• Cored-out back
• Powder-coated handle
• 8 lbs.
• Used by utility companies
• 8”D x 10”L x 5”H
WCH2057 – LARGE CHOCK
• 16 lbs.
• 10”D x 12”L x 8”H
• Used for off-road equipment and trucks
WCH52475 – ASSEMBLY CHAINChain assembly can be sold separately or attached to wheel chock.
OSHA SPECIFICATIONS:1910.178(K) TRUCKS AND RAILROAD CARS(1) The brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
17Visit our website at RoadChoice.com.
Dock Bumpers
RUBBER DOCK BUMPERS• Manufactured from fiber-reinforced
prime rubber containing nylon and polyester
• 80+5 Durometer
• Impact recovery (ASTM 1170) of 95%
• Tensile strength = 1000+ psi
TRAILER BUMPER CROSS REFERENCE CHARTPart # Description Thickness
RDB2312 Tramec 30004
RDB2036 Tramec 30036
RDB2045 Tramec 30067
RDB2046 Tramec 30071
RDB2006 Tramec 30026
RDB2042 Tramec 30039
RDB2044 Tramec 30037
RDB2027 Tramec 30027
RDB2043 Tramec 30038
RDB2041 Tramec 30040
RDB2345 Tramec 30045
Part # Description Thickness
RDBUTM053 Utility 03-1250-053
RDBUTM172 Utility 03-1250-172
RDBUTM214 Utility 03-1250-214
RDBUTM006 Utility 03-1250-006
RDBUTM259 Utility 03-1250-259
Part # A B C D L W H
RDB2000 1-1/2” 3-1/2” 3” 9/16” 6” 3” 5”
RDB2006 1-1/2” 1-3/4” 3” 9/16” 6” 3” 3-1/2”
RDB2312 1-3/8” 1-1/8” 2-5/8” 17/32” 6” 2-3/8” 3-1/4”
RDB2027 1-3/16” 1-3/4” 3-1/2” 11/16” 5-3/4” 3-3/4” 4-1/2”
RDB2042 1-1/4” 1” 4-5/8” 9/16” 7-7/8” 2-3/8” 2”
RDB2044 1-1/2” 1-1/4” 2-5/8” 17/32” 6” 2-3/4” 3”
RDB2345 1-7/16” 1-1/4” 3-1/2” 5/8” 6” 2-5/8” 3-1/4”
RDBUTM053 1-1/4” 3-1/2” 3-1/2” 17/32” 6-1/8” 3-5/8” 5-1/4”
RDBUTM172 1-1/4” 2-3/4” 3-1/2” 17/32” 6-1/8” 3-5/8” 4-1/2”
RDBUTM214 1-1/4” 1-3/4” 2-3/8” 17/32” 4-5/8” 2-5/8” 3-1/2”
RDBUTM259 1-1/4” 2-1/4” 3-1/2” 17/32” 6-1/8” 3-5/8” 4”
RDBUTM006 1-1/4” 1-3/4” 3-1/2” 17/32” 6-1/8” 3-5/8” 3-1/2”
18 Visit our website at RoadChoice.com.
Dock Bumpers
APPLICATIONS:
• Perfect protection for any high-traffic truck dock.
• In-plant wall protection from forklifts and other material-handling vehicles.
MATERIALS:
• Manufactured from fiber-reinforced prime rubber containing nylon and polyester.
• All bumpers have an impact recovery (ASTM 1170) of 95% with 80+ 5 durometer tensile strength.
• All molds have pre-drilled, countersunk mounting holes for easy installation and are drilled to accept 3/4” anchor bolts.
RUBBER DOCK BUMPERSRoad Choice molded dock bumpers are the best in the industry. All bumpers are molded from fiber-reinforced rubber to ensure durability.
EXTRUDED RUBBER BUMPERS
• Available up to 6 ft.
• Drilled holes
Part # DescriptionWeight Per Pair
RDB2099 4” x 12” x 13” 21 lbs.
Part # Description
RDB312 D-3 Dock Bumper 12”L x 3”W x 3”H
RDB324A D-3 Dock Bumper, No Holes 24”L x 3”W x 3”H
RDB372A D-3 Dock Bumper, No Holes 72”L x 3”W x 3”H
RDB412 D-4 Dock Bumper 12”L x 4”W x 4”H
RDB412A D-4 Dock Bumper, No Holes 12”L x 4”W x 4”H
RDB424 D-4 Dock Bumper 24”L x 4”W x 4”H
RDB424A D-4 Dock Bumper, No Holes 24”L x 4”W x 4”H
RDB472 D-4 Dock Bumper 72”L x 4”W x 4”H
RDB612 D-6 Dock Bumper 12”L x 6”W x 6”H
RDB624 D-6 Dock Bumper 24”L x 6”W x 6”H
RDB672 D-6 Dock Bumper 72”L x 6”W x 6”H
RDB-412Overall Length: 12”Overall Thickness: 4”Height: 4-3/8”Bolt Size: 1/2 x 3”Total Weight: 5-1/2 lbs.
19Visit our website at RoadChoice.com.
Dock Bumpers
RUBBER DOCK BUMPERS• Manufactured from fiber-reinforced prime rubber
containing nylon and polyester
• 80+5 Durometer
• Impact recovery (ASTM 1170) of 95%
• Tensile strength = 1000+ psi
• Compression molded
SPECIAL BUMPERS
Part # A B C L W H
RDB2036 5-1/2” 3/4” 3-1/4” 8” 5-1/4” 3-5/8”
RDB2045 5-1/2” 9/16” 3” 7-5/8” 5-1/2” 3-5/8”
RDB2046 5-3/8” 9/16” 3-1/8” 8” 6” 3”
Part # Approx. Weight Each Size
RDB2041 3 lbs. 2” x 2” x 16”
Part # Approx. Weight Each Size
RDB2043 3 lbs. 6” x 4” x 3”
RDB2041 RDB2043
20 Visit our website at RoadChoice.com.
Laminated Bumpers / Door Bumpers
LAMINATED BUMPERS• Stainless steel hardware
• Multi-ply belting
DOOR BUMPERS• Made of SBR 60 Durometer
Part # Length Width Height
RDB2100 10-1/4” 3” 3-1/2”
RDB2101 6” 4” 4”
RDB2102 5-1/2” 4” 3”
RDB2103 5-1/2” 4” 3-1/4”
RDB2104 5-5/8” 4” 4”
RDB2105 9-1/2” 3” 4”
RDB2106 6-1/4” 2-7/8” 2-3/4”
RDB2107 6-1/8” 3-1/4” 2-3/4”
RDB2109 6” 2-3/4” 3”
Part # Size Hole Diameter
RDB2613 2-1/2” x 1” 3/8”
RDB025 1-7/8” x 1-5/8” 9/16”
RD2108 1-1/2” x 3/4” 1/4”
RDB2613
Weld-OnRDB2102
Weld-OnRDB2104
Weld-OnRDB2106
Stud MountRDB2107
Stud MountRDB2109
Weld-OnRDB2103
Bolt-OnRDB2100 = WAB21400170RDB2105 = WAB21400177
Bolt-OnRDB2101
RDB025 RDB2108
21Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
STANDARD .640 BAR TYPE MUD FLAP HANGERSOur .640 square spring steel hangers are the standard for the trucking industry and are made to accommodate flaps of all sizes. Road Choice mud flap hangers are manufactured and tested to OEM specs using SAE test methods.
Kits include (two) mud flap hangers with adjustable fl ap clips, (two) MFH-27B711 mounting brackets, (two) cotter pins, and mounting hardware for fl aps and brackets.
Part # Description Cross Reference
MFH2723B 29.75” Straight Triple Coil Kit B22 031-00123
Part # Description Cross Reference
MFH2733B 27.64” Angled Triple Coil / Square Bar Kit B33 031-00133
Part # Description Cross Reference
MFH2729B5.50” Offset, 29.75” Straight /
Square Bar KitB29 031-00129
Part # Description Cross Reference
MFH2725A29.75” Straight Hanger / Universal
Square Bar, SingleA25 034-00426
MFH2725B 29.75” Kit with Hardware, Pair B25 031-00125
MFH2725B70 Bulk Barrel 70/ea.* A25RLB40 031-0050
* Hardware not included.
Part # Description Cross Reference
MFH2735A27.42” Angled Hanger / Universal
Square Bar, SingleA35 034-00433
MFH2735B Kit with Hardware, Pair B35 031-00135
MFH2735B40 Bulk Barrel 40/ea.* A35RLB40 031-00049
* Hardware not included.
Straight Square Bar Triple Coil
Straight Square Bar
Angled Triple Coil Square Bar
Angled Square Bar
Offset Square Bar
22 Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
HEAVY DUTY .750 BAR TYPE MUD FLAP HANGEROur .750 square spring steel hangers are among the strongest and most durable flap hangers on the market, designed to meet the heavy load of anti-spray flaps. Road Choice mud flap hangers are manufactured and tested to OEM specs using SAE test methods.
Kits include (two) mud flap hangers with adjustable flap clips, (two) MFH27B700 mounting brackets, (two) cotter pins and mounting hardware for flaps and brackets.
Part # Description Cross Reference
MFH2721B 25.75” Straight Triple Coil/HD Round Bar Kit B21 031-00121
Straight Round Triple Coil
Part # Description Cross Reference
MFH2781B 27.42” Angled Hanger / HD Square Bar Kit B81 031-00105
Angled Square Bar
Part # Description Cross Reference
MFH2782B 29.75” Straight Hanger / HD Square Bar Kit B82 031-00102
Straight Square Bar
Part # Description Cross Reference
MFH2783B 29.75” Straight Double Coil / HD Square Bar Kit B83 031-00108
Straight HD Double Coil Square Bar
Part # Description Cross Reference
MFH2784B 27.78” Angled Double Coil / HD Square Bar Kit B84 031-00110
Angled HD Double Coil Square BarRoad Choice mud flap hangers and brackets are manufactured
to the highest specifications to meet your needs.
Our mud flap hangers were tested by an independent lab, receiving a superior rating for minimum permanent deflection.
Road Choice mud flap hangers surpassed the Rockwell Hardness B testing per ASTM E18.
23Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
STANDARD MOUNTING BRACKETS FOR .640 HANGERS• Cast steel construction
• Black primed finish
• Allows for relocation of brackets from one vehicle to another
• Kits include (two) brackets, (four) bolts w/lock washer, (four) nuts and (two) cotter pins
HEAVY DUTY MOUNTING BRACKETS FOR .750 HANGERS• Cast steel construction
• Black primed finish
• Allows for relocation of brackets from one vehicle to another
• Kits include (two) brackets, (four) bolts w/lock washer, (four) nuts, and (two) cotter pins
STANDARD ANTI-SAIL BRACKET• Assembly required
• Part number represents single bracket only—enough for one mud flap
• Fits standard 24.00” flaps
• Will accommodate flaps up to 3/8” thick
STANDARD ANTI-SAIL BRACKET – ONE PIECE DESIGN• Assembly required
• Part number represents single bracket only—enough for one mud flap
• Fits standard 24.00” flaps
• Will accommodate flap up to 1.00” thick
Part # Description Cross Ref.
MFH27B711 Black Cast Mount Bracket, Single B711
MFH27K711 Kit with Mounting Hardware, Pair K711
Part # Description Cross Ref.
MFH27B700 Black Cast Mount Bracket, Single B700
MFH27K700 Kit with Mounting Hardware, Pair K700
Part # Description Weight Cross Ref.
MFH2701SS 21” x 24” Anti-Sail Bracket, Stainless Steel 1.82 033-05126
MFH2701C 21” x 24” Anti-Sail Bracket, Chrome 1.82 033-05125
Part # Description Weight Cross Ref.
MFH2702SS21” x 24” Anti-Sail Bracket, One-Piece
Stainless Steel1.82 033-00076
MFH2702C 21” x 24” Anti-Sail Bracket, One-Piece Chrome 1.82 033-00075
24 Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
Part # Description Weight Cross Reference
MFH27051 2.00” x 2.00” x 27.50” Mounting Angle 3.4 lbs. #07-50 033-00051
MFH27053 2.00” x 24.00” Retaining Strap 1.4 lbs. #07-50-1 033-00053
Part # Description Weight Cross Ref.
MFH27516 Mud Flap Bolt Kit, Stainless Steel Packaged Set 0.72 031-01200
MFH27517 Mud Flap Bolt Kit, Zinc Packaged Set 0.72 031-01298
Part # Description Cross Ref.
MFH2725B70 Square Steel Straight Arm Hangers 70/ea. – MFH-2725A Bulk Barrel A25RLB40
MFH2735B40 Square Steel Angled Down Hangers 40/ea. – MFH-2735A Bulk Barrel A35RLB40
MUD FLAP MOUNTING ANGLE & RETAINING STRAP• .12” thick, heavy-duty steel construction
• Black primer finish
MUD FLAP BOLT KIT• Attaches mud flaps to any type of mud flap brackets
• Set consists of eight bolts, eight nuts, and sixteen washers
• Enough to hang two mud flaps
• Available in stainless steel or zinc options
BULK DISPLAYS
Hardware not included.
25Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
Part # Description Cross Ref.
CT27RT25 Straight Aluminum Conspicuity Strips, Pair RT25
CT27RT35 Angled Aluminum Conspicuity Strips, Pair RT35
Part # Description Cross Ref.
CT27069Plastic End Cap Packaged Set for CT27
Economy Brackets031-01269
Part # Description Type
CT27000 12” x 2” Strip (2) ea. / 6” Red x 6” White Pattern Strip
CT27003 150 Feet / 6” Red x 6” White Pattern Roll
CT27004 150 Feet / 11” White x 7” Red Pattern Roll
CT27005 150 Feet All-White Tape Roll
CT27006 150 Feet All-Yellow Tape Roll
CT27007 150 Feet All-Orange Tape Roll
CONSPICUITY STRIPS• Durable aluminum plate
• Reflective tape meets FMVS standard
• Universal – used either on roadside or curbside
• Can be used with any straight, shortie, bar, or spring-loaded bracket
PLASTIC REFLECITVE END CAP• For use on all CT27 Economy Brackets and many other brands
• Packaged set includes two reflective end caps and mud flap hardware
CONSPICUITY TAPE• DOT-C2 certified, exceeds NHTSA requirements
• Highly reflective, even up to a 90o angle
• Available in red and white roll/strips, all white roll or all yellow roll
• Quick and easy to apply
26 Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
ECONOMY SPRING-LOADED BRACKETS
Part # Description Bolt Patten Replaces
MFB27270 28” Straight Arm Economy (Black E-Coat), Set 1.12” 033-00270
MFB27277 28” Straight Arm Economy (Stainless Steel), Set 1.12” 033-00277
MFB 27868 30.25” Straight Arm Economy (Black E-Coat), Set 1.12” 033-00868
MFB27870 30.25” Straight Arm Economy (Stainless Steel), Set 1.12” 033-00870
Part # Description Bolt Patten Replaces
MFB27864 27.54” Angled Down Economy (Black E-Coat), Set 1.12” 033-00864
MFB27865 27.54” Angled Down Economy (Stainless Steel), Set 1.12” 033-00865
MFB27404 30.25” Angled Down Economy (Black E-Coat), Set 1.12” 033-03404
MFB27150 30.25” Angled Down Economy (Stainless Steel), Set 1.12” 033-04150
STRAIGHT TUBE-STYLE ECONOMY BRACKET (REPLACES FB27)
• Heavy-duty construction
• Design eliminates wind-caused bracket rotations
• Reduces flap and bracket damage
• Conforms to TTMA flap hole pattern
• Ideal for heavy-duty spray suppression flaps
ANGLED DOWN TUBE-STYLE BRACKET (REPLACES FB27)
• Heavy-duty steel construction
• Design eliminates wind-caused bracket rotations
• Reduces flap and bracket damage
• Conforms to TTMA flap hole pattern
• Ideal for heavy-duty spray suppression flaps
*Sets include CT27000• 12” x 2” strip (two) ea. /
6” red x 6” white pattern
*Sets include CT27000• 12” x 2” strip (two) ea. /
6” red x 6” white pattern
27Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
HEAVY-DUTY SPRING-LOADED
Part # Description Bolt Patten Replaces
MFB27B5728 28” Straight Arm HD (Black E-Coat), Sset 1.18” B5728
MFB27B5728SS 28” Straight Arm HD (Stainless Steel), Set 1.18” B5728S
MFB27B57 30” Straight Arm HD Black E-Coat, Set 1.18” B57
MFB27B57SS 30” Straight Arm HD (Stainless Steel), Set 1.18” B57S
Part # Description Bolt Patten Replaces
MFB27B6728 28” Angled Down HD (Black E-Coat), Set 1.18” B672825
MFB27B6728SS 28” Angled Down HD (Stainless Steel), Set 1.18” B672825S
MFB27B6728C 28” Angled Down HD (Chrome), Set 1.18” B672825C
MFB27B67 30” Angled Down HD (Black E-Coat), Set 1.18” B67
MFB2767C 30” Angled Down HD (Chrome), Single 1.18” B67C
MFB27B67SS 30” Angled Down HD (Stainless Steel), Set 1.18” B67S
MFB27B68 30” Angled Down HD (Black E-Coat), Set 2.5” B68
MFB27B68SS 30” Angled Down HD (Stainless Steel), Set 2.5” B68S
MFB27B68C 30” Angled Down HD (Chrome), Set 2.5” B68C
STRAIGHT ARM HD (REPLACES BETTS 57)
• Springs allow bracket to flex for extra durability
• Absorbs vibration and resists flap snags
• Springs allow bracket to flex for extra durability
• Works with any standard 24” wide flap
• Sets include two hangers with reflective tape and hardware
ANGLED DOWN HD (REPLACES BETTS B67 & B68)
• Downward angle allows for mounting in tight spaces
• Absorbs vibration, resists flap snags
• Springs allow bracket to flex for extra durability
• Works with any standard 24” wide flap
• Sets Includes two hangers with reflective tape and hardware
*Sets include CT27000• 12” x 2” strip (two) ea. /
6” red x 6” white pattern
*Sets include CT27000• 12” x 2” strip (two) ea. /
6” red x 6” white pattern
28 Visit our website at RoadChoice.com.
Mud Flap Hangers and Brackets
HEAVY-DUTY SPRING-LOADED
Part # Description Bolt Patten Replaces
MFB27B71 30.25” Straight Arm HD (Black E-Coat), Set 1.18” B71
MFB27B71SS 30.25” Straight Arm HD (Stainless Steel), Set 1.18” B71S
MFB27B71C 30.25” Straight Arm HD (Chrome), Single 1.18” B71C
MFB27B7 30.25” Straight Arm HD (Black E-Coat), Set 2.5” B7
MF27B7SS 30.25” Straight Arm HD (Stainless Steel), Set 2.5” B7S
MFB27B7C 30.25” Straight Arm HD (Chrome), Set 2.5” B7C
Part # Description Cross Ref.
MFB27LT77S LED Light Bar Kit with Hardware, Pair LT77S
TAPERED ARM HD BRACKET (REPLACE BETTS B7)
• Springs allow bracket to flex for extra durability
• Tapered design is extremely strong and efficient
• Works with any standard 24” wide flap
• Conspicuity strip not included
HIGH VISIBILITY LIGHT BARS WITH 4” ROUND LIGHTS• Stainless steel construction for durability
• Each stainless bar has three Pearl LED/Incandescent 4” round lights
• Standard pigtails included for easy installation
• Each bar measures 30”L x 6”W x 2.25”D
• Standard manufacturer’s warranty included
29Visit our website at RoadChoice.com.
Quarter Fender Accessories
Part # Description Weight
MF2406 Black Rubber Plain, Single 1.0 lbs.
MF2406PSB Black Poly Plain, Single 0.5 lbs.
MF2406PSW White Poly Plain, Single 0.5 lbs.
MF2406PSBRC Black Poly – Road Choice 0.5 lbs.
Part # Description
QFH39414 Top Flap Hardware, Zinc Plated
QFH39415 Top Flap Hardware, Stainless Steel
QFH39416 Top Flap Hardware, Black Nylon
QUARTER FENDER TOP FLAPS• Durable black or white polyethylene and black rubber options
• Custom flaps available with company logo
• Top flap hardware not included
TOP FLAP HARDWARE• For use with plain or custom logo flaps
• Available in stainless or zinc-plated steel and black nylon
• Includes eight nuts, eight bolts, and eight washers in a bag
30 Visit our website at RoadChoice.com.
Quarter Fender Accessories
Part # Description Weight
QFH391625 27” Stainless Steel Pipe with End Cap 2.5 lbs.
QFH391626 25” Black E-Coat Pipe with End Cap 2.5 lbs.
Part # Description Weight Cross Ref.
QFH391300 Stainless Steel 2” End Cap, Set .2 lbs. 1300-3A
QFH391301 Black Plastic 2” End Cap, Set .2 lbs.
Part # Description Weight Cross Ref.
QFH391585 Stainless Steel 2” Fender Clamp, Set .5 lbs. 1585-8WHA
QFH391590 Black E-Coat 2” Fender Clamp with Hardware, Set .2 lbs. 1590-8WHA
QUARTER FENDER MOUNT TUBE• Stainless steel or black e-coat construction
• Must be used with post, side mount socket, or 50” cross tube
• Includes 2” end cap
• Does not include clamp or hardware
QUARTER FENDER END CAPS• Available in stainless steel or black plastic
• 2” diameter
QUARTER FENDER CLAMPS• Available in stainless steel or black e-coat
• Sets includes two clamps with 5/8” bolt/nuts
*Sets packaged in bag
31Visit our website at RoadChoice.com.
Quarter Fender Accessories
Part # Description Weight Cross Ref.
QFH391600 8” Stub Post Mount, Single 3 lbs. 1600-15M
Part # Description Weight Cross Ref.
QFH391601 8” Stub Post Mount with Flange, Single 6 lbs. 1600-11M
Part # Description Weight Cross Ref.
QFH395001 U-Bolt Clamp Assembly Kit 1 lb. 1580-12
Part # DescriptionBar
LengthCross Ref.
QFH39500050.00” Cross-Mount Kit,
Including U-Bolt Clamp Assembly50.00” 555000
POST MOUNT SOCKET• Cast steel construction black primer finish
• For independent post mounting
• Bolts directly to frame or suspension using present vehicle hardware
• 8.00” for added strength and durability
POST MOUNT SOCKET WITH FLANGE• Steel construction black e-coat finish
• For independent side mounting
• Bolts directly to frame using present vehicle hardware
• Mounting plate 3.75” x 3.75”
CROSS-MOUNT TUBE HARDWARE• Two U-bolts with brackets
• Four nuts
• Four washers
CROSS-MOUNT TUBE KIT• Steel construction black primer finish
• For heavy-duty, over-the-frame mounting
• 50.00” long for added strength and durability
• Bulk kit contains one cross-mount tube and all mounting hardware
• Hardware packaged set consists of mounting brackets, u-bolts, and nuts
© 2017 Road Choice® Truck Parts – All Rights Reserved. RC0MF-17CAT
RoadChoice.com
top related