moccasin en shoemaster

For Release QS 1.0x

Page N 1 / 22 24/08/07 Mocassin

Create a 3D Mocassin

How to create a Mocassin in 3D using the specific Macro for QS

A- Install the Program

Double click on the 'Mocassin V1.2.exe' file

Select 'English' then Click 'NEXT'

Here you have to input the hard disk reference where to

install files

Click 'NEXT'

For Release QS 1.0x

Page N 2 / 22 24/08/07 Mocassin

Basicly the hard disk must be the hard disk where you have installed

Shoemaster program

For example if you have installed Shoemaster on hard disk C:\,

you must specify C:\

For example if you have installed Shoemaster on hard disk D:\,

you must specify D:\

Select New Install then click 'Install'

Select 'Finish'

And add in your 3D Startup File the syntax

$n//mocassin/setup.ini

For Release QS 1.0x

Page N 3 / 22 24/08/07 Mocassin

B- Create the Mocassin Model

Please note that the macro

Has been checked with a Right Last

For Release QS 1.0x

Page N 4 / 22 24/08/07 Mocassin

A- Create the inner reference line

B- Create the outer reference line

C- Create the bottom reference line

Using the bottom surface

For Release QS 1.0x

Page N 5 / 22 24/08/07 Mocassin

D- Create the Apron Pivoted Piece

For Release QS 1.0x

Page N 6 / 22 24/08/07 Mocassin

C- Use the Mocassin Macro

Go to the menu Mocassin and select the option Open

You will get the following toolbar

For Release QS 1.0x

Page N 7 / 22 24/08/07 Mocassin

;

Step 1- Set the mocassin

Select the Icon Setup Mocassin and follow the instructions below

Select the Outer Upper Reference

For Release QS 1.0x

Page N 8 / 22 24/08/07 Mocassin

Select the Inner Upper Reference

For Release QS 1.0x

Page N 9 / 22 24/08/07 Mocassin

Select the sprung piece

For Release QS 1.0x

Page N 10 / 22 24/08/07 Mocassin

Step 2- Move the Inner Part

Select the Icon Move Inner

For Release QS 1.0x

Page N 11 / 22 24/08/07 Mocassin

Step 3- Rotate the Inner Part

Select the Icon Rotate Inner

For Release QS 1.0x

Page N 12 / 22 24/08/07 Mocassin

Step 4: Move the Outer Part

Select the Icon Move Outer

For Release QS 1.0x

Page N 13 / 22 24/08/07 Mocassin

Step 5- Rotate the Outer Part

Select the Icon Rotate Outer

For Release QS 1.0x

Page N 14 / 22 24/08/07 Mocassin

Step 6- Split Mocassin

Select the Icon Split Mocassin

And Follow the order selection below

For Release QS 1.0x

Page N 15 / 22 24/08/07 Mocassin

For Release QS 1.0x

Page N 16 / 22 24/08/07 Mocassin

For Release QS 1.0x

Page N 17 / 22 24/08/07 Mocassin

Step 7- Reverse Line

Select the Icon Reverse Line

The Line Direction must be like the first image below, if not select all line to reverse

For Release QS 1.0x

Page N 18 / 22 24/08/07 Mocassin

Step 8- Blend the Inner Part

Select the Icon Blend Inner

Select the following sequence

For Release QS 1.0x

Page N 19 / 22 24/08/07 Mocassin

For Release QS 1.0x

Page N 20 / 22 24/08/07 Mocassin

Step 9- Blend the Outer Part

Select the Icon Blend Outer

Select the following sequence

For Release QS 1.0x

Page N 21 / 22 24/08/07 Mocassin

For Release QS 1.0x

Page N 22 / 22 24/08/07 Mocassin

Step 10- Finish Mocassin

Select the Icon Finish Mocassin

This command merges the mocassin line, you are ready to delete nodes on the line