mise en page 1 - eshop.boellhoff.de · 6 f < > < > s s rivkleblindrivetnut rivkle®...
Post on 13-Sep-2018
212 Views
Preview:
TRANSCRIPT
RIVKLE®
2307/16.02
Blind rivet nuts and studs
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 1
3
HRT
SFC
PN
Part number index 62
Page
Principle and function 4
Standard RIVKLE® blind rivet nuts 14
RIVKLE® HRT - High Resistance Thread 36
RIVKLE® SFC - For Fiber-reinforced polymer 38
RIVKLE® PN - Ultimate pull-out force 40
RIVKLE® Elastic - Vibration damping characteristics 42
RIVKLE® Studs 44
RIVKLE® - Waterproof 46
RIVKLE® - Special designs 48
RIVKLE® - Setting tools 50
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 3
4
a
b
c
RIVKLE® – Functions
RIVKLE® blind rivet nuts and studs are the mostversatile solution for adding a strong reusable internalor external thread to thin-walled work pieces, withaesthetic appearance.
Compatible with all substrates(steel, magnesium, aluminum, plastics, composites etc.).
Corrosion protectedNo additional finishing is required after setting, even with coated orpainted components.
Provides 2 funtions:� Rivet: enables two or more sheets (a & b)of dissimilar materials (plastic & metal…)to be joined
� Thread: enables an additional component(c) to be assembled and reused, if required.
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 4
5
RIVKLE® – Process
RIVKLE® is installed using a single-sided setting technique.Often the only fastening solution for hollow sections, housings orwhere access is limited to only one side of a component.This simplifies the design avoiding any need for a dedicated accesshole in the rear panel.
Easy and simple solution.� Can be installed without operator training� Several levels of installation process control are available to enhancequality management
� Easy and non destructive testing of installed RIVKLE®
Safe and ecologic solution:� No fumes (no exhaust needed)� No heat (no protection needed)=> no heat impact on application (surface treatment, deformation,material resistance…)
� No pollution� No risk to the operator
� Fast, reliable, repeatable and cost competitive process(total emplace cost)
� Optimized installation possible in under 3 seconds� Quick tooling exchange and adjustment operation(for example: M6 to M8)
� Entire range of setting equipment, from manual to full automaticprocess is available
RIVKLE® blind rivet nuts and studscan be fitted at any stage sobringing extreme flexibility to yourproduction process.RIVKLE® is a captive system.
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 5
6
� � � �
F
< >
<>
S
S
RIVKLE blind rivet nut
RIVKLE® blind rivet nut – Setting methods
The BÖLLHOFF recommended installation is the “pull method”.RIVKLE® can also be installed using the “press method”.
1 - Pull methods
The “pull method” comprises Spin on�, Insert�, Upset� and Spin off� cycles.
2 - Pull setting methods
2.1 Stroke setting method: control of the assembly tool displacement distance
The operator sets the stroke on the setting tool in accordance with the values shown in the RIVKLE® catalogue tables.The setting tool exerts the maximum pressure and automatically stops when the preset stroke is reached (mechanicalstop).
This represents the original way to install a RIVKLE® and remains the best choice today for stainless steel inserts.
Advantages: � Fast and simple process� Ideal for assemblies with no variation in sheet thickness
2.2 Pressure setting method: force controlled installation
In the stroke setting method, the tool delivers maximum and constant force over the full stroke of the mandrel. Where thereis a wide variation in thickness of the workpiece there is a definite risk that a blind rivet nut may not set properly,or become damaged due to the setting mandrel damaging the RIVKLE® thread. In this situation there will be prematurewear of the mandrel.This phenomenon is eliminated with the pressure setting method as the setting force is controlled irrespective of thethickness of the workpiece.
This setting principle is particularly well suited to workpieces with variable thickness (plastic parts, various layers…) andprovides consistent setting quality.
Advantages: � Optimised setting into panels with thickness variations� Possibility to set the same RIVKLE® more than once� Permits quality control (force indicator…)� Extended mandrel life� Can also set different types of RIVKLE® with one tool and one single setup
Upset Spin offSpin on Insert
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 6
7
Setting range= Force to obtaingood installation
Force
StrokeStroke in max
thickness
Stroke in minthickness
C1: setin maximum
thickness
C2: setin minimum
thickness
Min
Max
3 - Installation force value
The recommended setting force is dependent upon a combination of information coming from RIVKLE® parameters(force to obtain a good installation) and screwing parameters (tensile strength after assembly and during service).
3-1 RIVKLE® parameters:
Maximum thickness(C1)
Minimum thickness(C2)
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 7
8
DIN
F0 F1
< <
3,55,58,012,018,0
M3M4M5M6M8
21,0M1023,0M1250,0
3,55,58,013,020,022,028,0-
-9,512,015,020,0---
1,93,03,85,510,012,015,0-M14
5 500 N8 000 N12 000 N18 000 N
6 800 N10 000 N15 000 N27 000 N
3 830 N6 270 N8 834 N16 219 N
2,23 NmF0 max*Nm*
4,43 Nm7,70 Nm18,60 Nm
M4M5M6M8
Ø
8.8 >
DIN
SteelForce in kN
AluminiumForce in kN
Stainless steel A4Force in kN
Stainless steelForce in kN
* NFE 25-030 source - 8,8 screw class - Setting conditions B - 0,12 < u < 0,18 - Steel RIVKLE®
2. BÖLLHOFF does not recommend the use of mechanical screw-drivers for installingRIVKLE®.
Installation force range per diameter & RIVKLE® material
Setting force positioning
RIVKLE® – Installation
3-2 SCREW parameters :
When a assembly is in use, external influences generally increase the tensile strength in the screw (F1 > F0).
With correct installation, RIVKLE® exhibits the same behaviour as a standard nut.
Consequences:
1. BÖLLHOFF recommends a setting force higher than the mating screw clamp load, in order to ensure that nore-setting occurs during the life of the RIVKLE®.
Setting ForceAssembly Use
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 8
9
RIVKLE® Plus
RIVKLE test
Laboratory testing
BÖLLHOFF offers the services of our own certified laboratory to assessand report on the performance of our products when installed into yourcomponents.
RIVKLE® – Additional services
CAD
Free-of-charge download of 3D drawings from our ranges HELICOIL®,AMTEC®, SEAL LOCK®, KOBSERT and RIVKLE®. Integrate themdirectly into your design software.
Training
From our certified training centre, BÖLLHOFF imparts expertise to yourTeam (production, maintenance, process) to improve your experiencewhen using either our components or tools (theory & practice).
RIVKLE® Plus 24H
This is the core RIVKLE® range. These items are shipped within24 hours of your order being accepted. You can rest assured thatyour order will be delivered without delay.
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 9
10
><
><
d(mm)
L(mm)
B(mm)
><
e (min - max)(mm)
><
(mm) (mm)
Ø H
L2(mm)
E max(mm)
S(mm) << << <<
Head diameterOverall lengthThread size
Grip rangeDefines the range of total thickness of the customers part(even if it consists of more than one layer)
Hole geometryIf round –> diameterIf hexagonal –> wigth across flats
Head projection after settingVariable according to the application (setting load, material substrate, etc.)
Blind side projection after installationDefines the clearance needed on the blind side (cannot be used for qualitycontrol)
Setting strokeDifference of total length before and after installation
RIVKLE®
Mandrel*
Customers partAnvil*
Counter nut
Setting tool
*in accordance to chosen RIVKLE®*
RIVKLE® Nut RIVKLE® Stud
RIVKLE® – Legend
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 10
11
400 h720h
1000 h
400 h720h
1000 h
DIN
+–N
�
RIVKLE® – A real nut
A standard nut, when used with it’s equivalent screw grade (ex: 8.8 class screw with class 8 nut), must providestrength characteristics as dictated by recognised standards (ISO 898; ISO 16047; NFE 25-030, VDI2230). Forexample: In the case of over-tightening the joint then the screw must fail first leaving a re-usable nut. RIVKLE® blindrivet nuts have been designed to adhere strictly to these rules.
Our standard surface treatment, Zn 8K+; 8 to 15 µm; provides the highestcorrosion resistance in the standard market (400 hours to Red Rust accordingto ISO9227). For the most demanding applications, ZnNi8A/Fe; 8 to 15 µm,can be supplemented with either a lubricant and/or reinforcement to reach720 or even 1000 hours to Red Rust.
C101012L13
AISI 303KAISI 302 HQAISI 316 Cu
5052
1.02141.0718
1.4570 (A1)1.4567 (A2)1.4578 (A4)AW-5052
11SMnPb3010B221.553020Mnb5
X6CrNiCu18-9-2X3CrNiCu18-9-4
X3CrNiCuMo17-11-3-2AW-AI Mg 2,5
RIVKLE® – Material and surface treatment
Num.EN USA
DescriptionC10C or equivalent
Steel
Stainless steel
Aluminium
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:44 Page 11
12
• • M4 - M12 M4 - M8
• • M4 - M8
• • M4 - M8
• • M4 - M12 M4 - M10
• • M3 - M12 M3 - M12
• • M3 - M10 M4 - M10
• • M3 - M10 M3 - M10
• • M3 - M14 M3 - M12
• • M3 - M8
• • M3 - M12 M3 - M12
• • M7 - M12
• • M6 - M8
• • M4 - M10
• • M4 - M10 M4 - M6
• • M3 - M12 M3 - M12
• • M3 - M12 M3 - M12
• • M3 - M12 M3 - M12
• • M3 - M12 M3 - M12
• • M3 - M12 M3 - M12
• • M4 - M10
• • M3 - M8
• • M4 - M10
• • M4 - M8 M4 - M8
• • M5 - M8 M4 - M8
• • M4 - M8
• • M4 - M8
• • M3 - M10 M3 - M10
• • M3 - M10 M3 - M10
• • M5 - M8
• • M5 - M8
• • M6 - M8
14
15
15
16
17
18
19
20-21
21
22-23
37
39
41
24
25
26
27
28
29
30
30
31
32
32-33
33
33
34
35
37
44
44
HRT
SFC
PN
316L / A4
316L / A4
316L / A4
316L / A4
HRT
Studs
STEEL
STAINLESSSTEEL
ALU
STEEL
flat thin extra-thin plain knurled hexagonal half-hex slotted open closed holecounter-sunk
Body
Head
Body end
RIVKLE® blind rivet nuts and studs
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 12
13
RIVKLE® HRT
E E
233 91 232 XX
232 X0
343 67 343 77 233 07 233 27
343 66 343 76 233 06
233 00
233 26
343 41 343 51
343 48 343 58
233 41 233 51
233 48 233 58
10.9 / 12.98.8 max
RIVKLE® SFC
668 3 668 7
RIVKLE® PN
6263
E min E min
Ex: 343 67 XXX XXX
PLASTICS METAL
RIVKLE® – Choice
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 13
14
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
B
B
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
M3 6,0 0,651,5 - 2,5 343 41 030 02510,25 5,0 S=3,5-e 6,0
M40,5 - 3,0 343 41 040 03010,8
6,5 6,0S=4,5-e
6,2 0,33,0 - 5,5 343 41 040 05513,5 S=7,0-e
M50,5 - 3,0
0,5 - 3,5
343 41 050 030343 41 050 055
14,09,0 7,0
S=4,5-e 9,23,0 - 5,516,5 S=7,2-e 9,0
0,4
0,4M6343 41 060 03016,0
11,1 9,0S=5,5-e
10,23,5 - 6,0 343 41 060 06019,0 S=8,5-e
M80,7 - 3,5 343 41 080 03018,0
13,4 11,0S=5,2-e
12,5 0,53,5 - 6,0 343 41 080 06021,0 S=8,2-e
M101,0 - 3,5 343 41 100 03522,0
16,0 13,0S=6,0-e
16,00,5
3,0 - 6,0 343 41 100 06025,0 S=8,6-e
M121,0 - 4,0 343 41 120 04024,8
18,8 16,0S=7,8-e
1,04,0 - 8,0 343 41 120 08027,7 S=12,5-e
M4 0,5 - 2,0 343 51 040 02017,0 7,5 6,0 S=3,5-e 13,2 0,3M5 0,5 - 3,0
0,5 - 3,5343 51 050 03020,0 9,0 7,0 S=4,5-e 15,0 0,4
0,4M6 343 51 060 03023,0 11,1 9,0 S=5,5-e 17,2
M8
M10
0,5 - 3,5 343 51 080 03028,0 13,411,0
13,0
S=5,2-e 22,50,5
0,53,5 - 6,0 343 51 080 06030,0 13,5 S=8,5-e 22,03,0 - 6,0 343 51 100 06034,5 16,3 S=8,2-e 27,0
RIVKLE® Plus
RIVKLE® Plus
Steel
Steel | Thin head | Hexagonal | Open
RIVKLE® – Blind rivet nuts - Steel
Steel | Thin head | Hexagonal | Closed
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 14
15
B
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
M4 0,5 - 3,00,5 - 3,00,5 - 3,00,5 - 3,0
233 41 040 23011,3 9,0 6,0 S=4,5-e 5,8 1,01,0M5 233 41 050 23013,0 10,0 7,0 S=4,7-e 7,3
M6 233 41 060 23014,5 13,0 9,0 S=5,0-e 8,0 1,51,5M8 233 41 080 23018,0 16,0 11,0 S=5,3-e 11,2
M4 0,5 - 3,00,5 - 3,00,5 - 3,00,5 - 3,0
343 41 040 23011,0 7,5 6,0 S=4,5-e 6,0 0,30,3M5 343 41 050 23013,0 8,7 7,0 S=5,2-e 7,5
M6 343 41 060 23014,0 10,9 9,0 S=5,3-e 8,3 0,40,4M8 343 41 080 23017,5 13,3 11,0 S=5,8-e 11,3
M4 0,5 - 2,0 343 21 040 02010,4 7,65 6,4 S=4,0-e 6,8 0,5M5 0,5 - 3,0 343 21 050 03011,8 8,75 7,3 S=5,0-e 7,0 0,6
0,6M6 0,7 - 3,0 343 21 060 03014,6 11,45 9,7 S=5,2-e 9,5M8 0,9 - 3,3 343 21 080 03316,0 12,70 10,7 S=5,9-e 10,2 0,7
B
RIVKLE® Plus
RIVKLE® Plus
RIVKLE® Plus
Steel
Steel | Flat head | Semi-hexagonal | Open
Steel | Thin head | Semi-hexagonal | Open
Steel | Thin head | Semi-hexagonal | Open
For holes with imperial dimensions
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 15
16
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
M4 0,5 - 2,0 233 41 040 02010,0 9,0 6,0 S=3,5-e 5,0 1,0
1,0M50,5 - 3,0
0,5 - 3,0
233 41 050 03014,010,0 7,0
S=5,0-e 9,02,5 - 4,5 233 41 050 04514,3 S=6,6-e 6,7
M6233 41 060 03016,0
13,0 9,0S=5,2-e
10,0 1,5
1,5
3,0 - 5,5 233 41 060 05519,0 S=7,5-e
M80,5 - 3,0 233 41 080 03018,0
16,0 11,0S=5,5-e
11,03,0 - 5,5 233 41 080 05521,0 S=8,0-e
M101,0 - 3,5 233 41 100 03523,0
19,0 13,0S=6,1-e
15,0 2,0
2,03,5 - 6,0 233 41 100 06025,7 S=8,7-e
M12 1,0 - 4,0 233 41 120 03027,0 23,0 16,0 S=7,7-e 17,0
M4 0,5 - 2,0 233 51 040 02015,0 9,0 6,0 S=3,5-e 10,0 1,01,0M5 0,5 - 3,0
0,5 - 3,00,5 - 3,0
233 51 050 03020,0 10,0 7,0 S=5,0-e 14,7M6 233 51 060 03023,0 13,0 9,0 S=5,2-e 17,0 1,5
1,5M8233 51 080 03026,0
16,0 11,0S=5,5-e
19,03,0 - 5,5 233 51 080 05529,0 S=8,0-e
M10 1,0 - 3,5 233 51 100 03533,0 19,0 13,0 S=6,1-e 25,0 2,0
RIVKLE® Plus
RIVKLE® Plus
Steel
RIVKLE® – Blind rivet nuts - Steel
Steel | Flat head | Hexagonal | Open
Steel | Flat head | Hexagonal | Closed
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 16
17
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
M6
M8
M10
M5
M4
M30,5 - 2,0 343 67 030 0209,0 5,7
6,05,0 S=3,6-e
S=3,6-e5,5
0,4
0,30,40,30,4
0,4
0,4
1,5 - 3,0 343 67 030 0309,8 5,70,5 - 3,0 343 67 040 23011,0
6,6 6,0S=4,9-e 5,8
2,5 - 4,0 343 67 040 04011,9 S=5,6-e 5,90,5 - 3,0 343 67 050 23013,0
7,0S=5,3-e 7,4
2,5 - 4,0 343 67 050 04013,8 S=5,8-e 7,60,5 - 3,0 343 67 060 23014,0
10,0 9,0S=5,1-e 8,5
3,0 - 4,5 343 67 060 04515,3 S=6,3-e8,6
4,5 - 6,0 343 67 060 06016,9 S=7,9-e0,5 - 3,0 343 67 080 23017,5
12,0 11,0S=6,0-e 11,1
0,5
0,5
0,5
3,0 - 4,5 343 67 080 04518,9 S=6,4-e12,0
4,5 - 6,0 343 67 080 06020,5 S=8,0-e0,7 - 3,5 343 67 100 23521,0
14,0 13,0S=6,5-e 14,0
3,0 - 4,5 343 67 100 04521,9 S=7,1-e14,3
4,5 - 6,0 343 67 100 06023,5 S=8,7-e
M12 17,0 16,0 17,83,0 - 4,5 343 67 120 04525,8 S=7,5-e4,5 - 6,0 343 67 120 06027,4 S=9,1-e
8,0
M30,7 - 1,5 343 77 030 01512,6
6,0 5,0S=2,0-e 10,1
0,4
0,3
0,4
0,6
0,4
1,5 - 3,0 343 77 030 03014,1 S=3,6-e 10,0
M40,5 - 3,0 343 77 040 03017,7 6,7
6,66,0
S=4,9-e 12,810,92,5 - 4,0 343 77 040 04016,9 S=5,6-e
M50,7 - 2,5 343 77 050 02518,2
8,0 7,0S=4,2-e
13,6
16,0
13,6
2,5 - 4,0 343 77 050 04019,8 S=5,8-e
M60,5 - 3,0 343 77 060 03121,3 10,0
9,69,0
S=5,0-e3,0 - 4,5 343 77 060 04520,3 S=6,3-e4,5 - 6,0 343 77 060 06021,9 S=7,9-e
M80,8 - 3,0 343 77 080 03023,3
12,0 11,0S=4,8-e
18,0 0,5
0,5
0,5
3,0 - 4,5 343 77 080 04524,9 S=6,4-e4,5 - 6,0 343 77 080 06026,5 S=8,0-e
M100,8 - 3,0 343 77 100 03028,3
14,0 13,0S=5,5-e
22,33,0 - 4,5 343 77 100 04529,9 S=7,1-e4,5 - 6,0 343 77 100 06031,5 S=8,7-e
M120,8 - 3,0 343 77 120 03033,2
17,0 16,0S=5,9-e
26,83,0 - 4,5 343 77 120 04534,8 S=7,5-e4,5 - 6,0 343 77 120 06036,4 S=9,1-e
RIVKLE® Plus
Steel | Thin head | Knurled | Closed
Steel | Thin head | Knurled | Open
Steel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 17
18
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
M3
0,75 - 1,00 233 07 030 1008,8
7,0 5,0
S=2,2-e
6,0 1,0
1,0
1,0
1,00 - 1,75 233 07 030 1759,6 S=3,0-e
M4
1,75 - 2,50 233 07 030 25010,4 S=3,7-e2,50 - 3,25 233 07 030 32511,2 S=4,6-e
8,09,0
6,06,35,8
M5
0,50 - 3,00 233 07 040 23011,3 S=4,5-e2,50 - 3,25 233 07 040 32511,6 S=4,6-e
10,0 7,07,38,08,0
M6
0,50 - 3,00 233 07 050 23013,0 S=4,7-e3,00 - 4,00 233 07 050 04015,0 S=6,0-e0,50 - 3,00 233 07 060 23014,5
13,0
16,0
9,0S=5,0-e
3,00 - 5,50 233 07 060 25517,2 S=7,5-e 8,21,5
1,5233 07 080 230
M8
M10
0,50 - 3,0018,0
19,0
16,0
11,0S=5,5-e 11,0
233 07 080 2553,00 - 5,5020,7 S=8,1-e 11,1
13,013,9
15,02,0
0,70 - 3,50 233 07 100 23522,0 S=6,1-e3,00 - 4,50 233 07 100 45024,0 S=7,5-e4,50 - 6,00 233 07 100 60025,6 S=9,0-e
1,0
1,0
M4 8,0 6,0 11,31,00 - 1,75 233 27 040 17515,0 S=3,0-e
M5
1,75 - 2,50 233 27 040 25015,8 S=3,7-e2,50 - 3,25 233 27 040 32516,6 S=4,6-e0,50 - 1,00 233 27 050 10017,6
9,0 7,0
S=3,0-e
14,6
M6
1,00 - 2,00 233 27 050 20018,7 S=4,0-e2,00 - 3,00 233 27 050 30019,8 S=5,0-e3,00 - 4,00 233 27 050 40020,9 S=6,0-e
M8
0,50 - 3,00 233 27 060 03021,5 13,011,016,014,0
9,0S=4,5-e 15,0
1,5
1,5
3,00 - 4,50 233 27 060 45025,2 S=6,5-e 17,0
M10 16,0
11,019,018,8
1,00 - 3,503,50 - 5,00
233 27 080 350233 27 080 500
26,228,0
S=6,0-eS=8,0-e
1,00 - 1,50 233 27 100 15030,713,0
S=4,5-e24,9 2,01,50 - 3,00 233 27 100 30032,3 S=6,0-e
4,50 - 6,00 233 27 100 60035,5 S=9,0-e
RIVKLE® Plus
Steel
RIVKLE® – Blind rivet nuts - Steel
Steel | Flat head | Knurled | Open
Steel | Flat head | Knurled | Closed
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 18
19
0,1
0,1
0,1
0,1
0,1
M41,00 - 1,75 233 37 040 17514,2
8,0 6,0S=3,2-e
11,31,75 - 2,50 233 37 040 25015,0 S=4,0-e
M5
2,50 - 3,25 233 37 040 32515,8 S=4,7-e1,00 - 2,00 233 37 050 20017,7
9,0 7,0
S=4,0-e
14,6
M6
2,00 - 3,00 233 37 050 30018,8 S=5,0-e3,00 - 4,00 233 37 050 40019,9 S=6,0-e4,00 - 5,00 233 37 050 50021,0 S=7,0-e
M8
1,50 - 3,00 233 37 060 30022,0
11,0 9,0
S=5,0-e
17,03,00 - 4,50 233 37 060 45023,6 S=6,5-e4,50 - 6,00 233 37 060 60025,2 S=8,0-e6,00 - 7,50 233 37 060 75026,8 S=9,5-e
M10
1,50 - 3,00 233 37 080 30024,8 12,6
11,0
S=6,0-e
19,83,00 - 4,50 233 37 080 45026,4
14,0S=7,5-e
4,50 - 6,00 233 37 080 60028,0 S=9,0-e6,00 - 7,50 233 37 080 75029,6 S=10,5-e1,50 - 3,00 233 37 100 30030,3 15,0
13,0S=6,0-e
24,93,00 - 4,50 233 37 100 45031,916,0
S=7,5-e4,50 - 6,00 233 37 100 60033,5 S=9,0-e
1,0
1,2
1,0
1,4
1,2
1,5
1,4
2,0
1,4
2,0
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
0,1
0,1
0,1
0,1
0,1
0,1
1,0
1,2
1,0
1,2
1,0
1,4
1,2
1,5
1,4
2,0
1,4
2,0
M31,00 - 1,75 233 17 030 1758,8
7,0 5,0S=3,2-e
6,01,75 - 2,50 233 17 030 2509,6 S=4,0-e
M4
2,50 - 3,25 233 17 030 32510,4 S=4,7-e1,00 - 1,75 233 17 040 1759,2
8,0 6,0S=3,2-e
6,31,75 - 2,50 233 17 040 25010,0 S=4,0-e
M5
2,50 - 3,25 233 17 040 32510,8 S=4,7-e1,00 - 2,00 233 17 050 20011,6 8,5
9,07,0
S=4,0-e
8,5
M6
2,00 - 3,00 233 17 050 30012,7 S=5,0-e3,00 - 4,00 233 17 050 40013,8 S=6,0-e4,00 - 5,00 233 17 050 50014,9 S=7,0-e
M8
1,50 - 3,00 233 17 060 30015,0
11,0
10,69,0
S=5,0-e
10,03,00 - 4,50 233 17 060 45016,6 S=6,5-e4,50 - 6,00 233 17 060 60018,2 S=8,0-e6,00 - 7,50 233 17 060 75019,8 S=9,5-e
M10
1,50 - 3,00 233 17 080 30016,5 12,613,6
11,0
S=6,0-e
11,53,00 - 4,50 233 17 080 45018,1
14,0
S=7,5-e4,50 - 6,00 233 17 080 60019,7 S=9,0-e6,00 - 7,50 233 17 080 75021,3 S=10,5-e1,50 - 3,00 233 17 100 30020,4 15,0
13,0S=6,0-e
15,03,00 - 4,50 233 17 100 45022,016,0
S=7,5-e4,50 - 6,00 233 17 100 60023,6 S=9,0-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
Steel
Steel | Countersunk head | Knurled | Open
Steel | Countersunk head | Knurled | Closed
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 19
20
M3
0,5 - 1,0 233 01 030 0108,5
7,5 5,0
S=2,8-e
4,8 1,0
1,0
1,0
1,0 - 1,5 233 01 030 0159,0 S=3,3-e
M4
1,5 - 3,0 233 01 030 03010,0 S=4,8-e3,0 - 4,5 233 01 030 04511,5 S=6,3-e4,5 - 6,0 233 01 030 06013,0 S=7,8-e0,5 - 1,0 233 01 040 01010,0
9,0 6,0
S=2,6-e
5,41,0 - 2,0 233 01 040 02010,5 S=3,6-e
M5
2,0 - 4,0 233 01 040 04012,0 S=5,6-e4,0 - 6,0 233 01 040 06014,0 S=7,6-e0,5 - 3,0 233 01 050 03014,0
10,0 7,0S=5,0-e
8,0
M6
3,0 - 5,5 233 01 050 05517,0 S=7,5-e5,5 - 8,0 233 01 050 08020,0 S=10,0-e
M8
0,5 - 3,0 233 01 060 03016,013,0 9,0
S=5,2-e10,0 1,5
1,5
3,0 - 5,5 233 01 060 05519,0 S=7,7-e5,5 - 8,0 233 01 060 08022,0 S=10,2-e
M121,0 - 4,0 233 01 120 04027,0
23,0 16,0S=7,7-e
17,5 2,04,0 - 7,0 233 01 120 07030,0 S=10,7-e7,0 - 10,0 233 01 120 10033,0 S=13,7-e
M10
0,5 - 3,0 233 01 080 03018,0
16,0 11,0
S=5,7-e
11,03,0 - 5,5 233 01 080 05521,0 S=8,2-e5,5 - 8,0 233 01 080 08024,0 S=10,7-e8,0 - 10,5 233 01 080 10527,0 S=13,2-e1,0 - 3,5 233 01 100 03523,0
19,0 13,0
S=6,5-e
15,0 2,03,5 - 6,0 233 01 100 06026,0 S=9,0-e6,0 - 8,5 233 01 100 08529,0 S=11,5-e8,5 - 11,0 233 01 100 11032,0 S=14,0-e
M14 24,0 18,0 21,8 2,54,5 - 6,0 233 01 140 60035,5 S=10,5-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
Steel
Steel | Flat head | Plain | Open
RIVKLE® – Blind rivet nuts - Steel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 20
21
0,5 - 1,5 343 01 030 1508,40,5 - 2,0 343 01 040 15010,40,5 - 3,0 343 01 050 15011,6
M3M4M5
5,26,77,5
4,76,47,1
S=3,0-eS=3,5-eS=4,5-e
5,57,37,3
0,40,50,60,60,7 - 3,0 343 01 060 20014,3M6 10,2 9,5 S=5,5-e 9,3
0,8 - 4,5 343 01 080 45016,8M8 11,3 10,5 S=7,5-e 9,6 0,7
M3 7,5 5,0 8,8 1,0
1,0
1,0
1,0 - 1,5 233 21 030 01513,0 S=3,3-e
M4
1,5 - 3,0 233 21 030 03014,0 S=4,8-e3,0 - 4,5 233 21 030 04515,5 S=6,3-e
9,0 6,0 10,41,0 - 2,0 233 21 040 02015,5 S=3,6-e
M5
2,0 - 4,0 233 21 040 04017,0 S=5,6-e4,0 - 6,0 233 21 040 06019,0 S=7,6-e0,5 - 3,0 233 21 050 03020,0
10,0 7,0S=5,0-e
14,0
M6
3,0 - 5,5 233 21 050 05523,0 S=7,5-e5,5 - 8,0 233 21 050 08026,0 S=10,0-e
M8
0,5 - 3,0 233 21 060 03023,013,0 9,0
S=5,2-e17,0 1,5
1,5
3,0 - 5,5 233 21 060 05526,0 S=7,7-e5,5 - 8,0 233 21 060 08029,0 S=10,2-e
M121,0 - 4,0 233 21 120 04039,0
23,0 16,0S=7,7-e
29,54,0 - 7,0 233 21 120 07042,0 S=10,7-e
M10
0,5 - 3,0 233 21 080 03026,0
16,0 11,0
S=5,7-e
19,03,0 - 5,5 233 21 080 05529,0 S=8,2-e5,5 - 8,0 233 21 080 08032,0 S=10,7-e8,0 - 10,5 233 21 080 10535,0 S=13,2-e1,0 - 3,5 233 21 100 03533,0
19,0 13,0S=6,5-e
25,0 2,0
2,0
3,5 - 6,0 233 21 100 06036,0 S=9,0-e6,0 - 8,5 233 21 100 08539,0 S=11,5-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
RIVKLE® Plus
Steel
For holes with imperial dimensions
Steel | Thin head | Plain | Open
Steel | Flat head | Plain | Closed
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 21
0,9
1,3
0,9
1,3
1,5
1,5
1,5
1,5
1,7
22
M3
1,0 - 1,5 233 11 030 0158,56,6
5,0
S=2,8-e
4,8 0,1
0,1
0,1
0,1
0,1
0,1
0,1
1,5 - 3,0 233 11 030 0309,0
7,2
S=4,3-e
M4
3,0 - 4,5 233 11 030 04510,5 S=5,8-e4,5 - 6,0 233 11 030 06012,0 S=6,3-e1,0 - 2,0 233 11 040 02010,0 7,2
7,8 6,0
S=3,7-e
5,42,0 - 3,0 233 11 040 03010,5
8,2
S=4,7-e
M5
3,0 - 5,0 233 11 040 05012,0 S=6,7-e5,0 - 7,0 233 11 040 07014,0 S=8,7-e1,5 - 4,0 233 11 050 04014,0
9,6
9,27,0
S=6,5-e8,0
M6
4,0 - 6,5 233 11 050 06517,0 S=9,0-e6,5 - 9,0 233 11 050 09020,0 S=11,5-e
M8
1,5 - 4,0 233 11 060 04016,0
11,7
11,39,0
S=6,2-e10,04,0 - 6,5 233 11 060 06519,0 S=8,7-e
6,5 - 9,0 233 11 060 09022,0 S=11,2-e
M121,7 - 4,5 233 11 120 04526,0
19,0 16,0S=8,2-e
17,54,5 - 7,5 233 11 120 07529,0 S=11,2-e7,5 - 10,5 233 11 120 10532,0 S=14,2-e
M10
1,5 - 4,0 233 11 080 04018,013,1 11,0
S=7,0-e11,04,0 - 6,5 233 11 080 06521,0 S=9,5-e
6,5 - 9,0 233 11 080 09024,0 S=12,0-e1,5 - 4,0 233 11 100 04022,0
15,5
15,113,0
S=7,3-e15,04,0 - 6,5 233 11 100 06525,0 S=9,8-e
6,5 - 9,0 233 11 100 09028,0 S=12,3-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
RIVKLE® – Blind rivet nuts - Steel
Steel | Countersunk head | Plain | Open
Steel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 22
23
M3
1,0 - 1,5 233 31 030 01512,5 6,6
5,0
S=2,8-e
8,8 0,1
0,1
0,1
0,1
0,1
0,1
0,1
1,5 - 3,0 233 31 030 03013,07,2
S=4,3-e
M4
3,0 - 4,5 233 31 030 04514,5 S=5,8-e4,5 - 6,0 233 31 030 06016,0 S=6,3-e1,0 - 2,0 233 31 040 02015,0 7,6
7,86,0
S=3,7-e
10,42,0 - 3,0 233 31 040 03015,5
8,2
S=4,7-e
M5
3,0 - 5,0 233 31 040 05017,0 S=6,7-e5,0 - 7,0 233 31 040 07019,0 S=8,7-e1,5 - 4,0 233 31 050 04020,0
9,6
9,27,0
S=6,5-e14,0
M6
4,0 - 6,5 233 31 050 06523,0 S=9,0-e6,5 - 9,0 233 31 050 09026,0 S=11,5-e
M8
1,5 - 4,0 233 31 060 04023,0
11,7
11,39,0
S=6,2-e17,04,0 - 6,5 233 31 060 06526,0 S=8,7-e
6,5 - 9,0 233 31 060 09029,0 S=11,2-e
M121,7 - 4,5 233 31 120 04538,0
19,0 16,0S=8,2-e
29,54,5 - 7,5 233 31 120 07541,0 S=11,2-e7,5 - 10,5 233 31 120 10544,0 S=14,2-e
M10
1,5 - 4,0 233 31 080 04026,0
13,5
13,111,0
S=7,0-e19,04,0 - 6,5 233 31 080 06529,0 S=9,5-e
6,5 - 9,0 233 31 080 09032,0 S=12,0-e1,5 - 4,0 233 31 100 04032,0
15,5 13,0S=7,3-e
25,04,0 - 6,5 233 31 100 06535,0 S=9,8-e6,5 - 9,0 233 31 100 09038,0 S=12,3-e
0,9
1,3
0,9
1,3
1,5
1,5
1,5
1,5
1,7
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
Steel | Countersunk head | Plain | Closed
Steel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 23
24
0,8 - 3,0 343 48 040 03011,50,5 - 3,00,5 - 3,00,5 - 3,0
343 48 050 02012,0343 48 060 02514,5
15,8 343 48 080 0301,0 - 3,5 343 48 100 03519,4
M4
M5M6
8,410,613,015,7
7,09,011,013,0
S=4,2-eS=4,4-eS=4,2-eS=4,7-eS=7,0-e
7,09,710,412,0
0,5 - 2,0 343 48 040 02010,47,3 6,0
S=3,1-e6,8 0,5
0,60,60,70,7
M8M10
0,5 - 2,5 343 58 040 02515,40,5 - 3,0 343 58 050 02017,4
343 58 060 03020,5
M4M5M6
7,38,610,6
6,07,09,0
S=3,8-eS=4,4-eS=4,2-e
11,512,515,0
0,50,6
0,5 - 3,0 0,6
B
B
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
RIVKLE® Plus
RIVKLE® – Blind rivet nuts - Stainless steel
Stainless steel | Thin head | Semi-hexagonal | Open
Stainless steel | Thin head | Semi-hexagonal | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 24
25
2,3 - 3,2 343 98 030 5919,50,8 - 3,0 343 98 040 62711,3
M3
M47,3
6,0
S=4,7-eS=4,2-e 6,8
1,0 - 2,3 343 98 030 5908,66,5 5,0
S=3,8-e4,5 0,40
0,303,0 - 4,2 343 98 040 62911,7 7,8 S=5,8-e 6,0 0,400,5 - 3,0 343 98 050 62211,8
M58,4
7,0S=4,4-e 7,0 0,30
3,0 - 4,5 343 98 050 62912,8 8,9 S=6,5-e 6,5 0,40
0,5 - 3,2 343 98 100 69019,3M10 15,6 13,0
S=6,8-e12,5 0,65
2,5 - 5,5 343 98 100 69121,5 S=9,1-e
0,5 - 3,0 343 98 060 62414,3M6
10,69,0
S=4,2-e 9,7 0,30
1,5 - 5,0 343 98 080 62517,6M8 12,9 11,0 S=7,0-e 10,0 0,30
1,0 - 4,5 343 98 120 50123,5M12 18,9 16,0 S=8,5-e 15,0 0,70
2,5 - 4,5 343 98 060 62914,011,1
S=7,0-e8,5 0,50
4,0 - 5,5 343 98 060 63016,0 S=8,0-e
2,3 - 3,2 343 98 030 59314,21,0 - 3,0 343 98 040 62816,1
M3
M47,3
6,0
S=4,7-eS=4,2-e 11,9
1,0 - 2,3 343 98 030 59213,36,5 5,0
S=3,8-e9,0 0,40
0,303,0 - 4,2 343 98 040 63017,3 7,8 S=5,8-e 11,5 0,401,0 - 3,5 343 98 050 62818,7
M58,4
7,0S=5,5-e 13,6 0,30
3,0 - 4,5 343 98 050 68320,0 8,9 S=6,5-e 13,4 0,50
1,0 - 3,5 343 98 100 69229,3M10 15,6 13,0 22,0 0,65
2,5 - 5,5 343 98 100 69331,3 S=9,0-e
1,0 - 3,5 343 98 060 62822,5M6
10,69,0
S=4,8-e 15,0 0,30
1,5 - 5,0 343 98 080 62926,6M8 12,9 11,0 S=7,0-eS=7,0-e
19,0 0,30
1,0 - 4,5 343 98 120 50234,0M12 18,9 16,0 S=8,5-e 26,4 0,70
2,0 - 4,5 343 98 060 63122,511,1
S=7,0-e15,5 0,50
4,0 - 5,5 343 98 060 63223,5 S=8,0-e
B
B
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
Stainless steel | Extra-thin head | Semi-hexagonal | Open
Stainless steel | Extra-thin head | Semi-hexagonal | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 25
2,3 - 3,0 233 48 030 0309,70,5 - 2,0 233 48 040 02012,0
M3
M49,08,0
6,0
S=4,5-eS=3,5-e 6,8
1,0 - 2,3 233 48 030 0239,07,0 5,0
S=3,1-e5,0 0,7
1,02,0 - 3,5 233 48 040 04012,1 S=5,5-e 6,0 0,70,5 - 3,012,5
M510,09,0
7,0S=4,7-e 8,0
1,02,0 - 4,0 233 48 050 04014,0 S=4,8-e 7,5
1,0 - 3,5 233 48 100 03520,5M10
17,013,0
S=7,5-e12,0
2,03,5 - 5,5 233 48 100 05522,7 16,0 S=9,4-e 1,8
1,8
0,5 - 3,0 233 48 060 00115,3M6
12,09,0
S=4,0-e 9,7 1,5
M8
1,0 - 4,5 233 48 120 04524,2M12 20,0 16,0 S=8,5-e 15,0
3,0 - 4,5 233 48 060 04516,0 11,0 S=7,1-e 9,0 1,40,5 - 3,0 233 48 080 00116,5
14,0 11,0S=4,1-e
9,6 1,53,0 - 5,5 233 48 080 00218,5 S=8,0-e
2,3 - 3,0 233 58 030 03014,30,5 - 2,0 233 58 040 02015,5
M3
M4 8,0 6,0
S=4,5-eS=3,8-e
11,5
1,0 - 2,3 233 58 030 02313,57,0 5,0
S=3,8-e9,5 0,7
0,82,0 - 3,5 233 58 040 04017,5 S=5,6-e0,5 - 3,0 233 58 050 00119,6
M5 9,0 7,0S=5,0-e 12,5 1,0
2,0 - 4,0 233 58 050 04020,0 S=6,1-e 13,5 0,8
1,0 - 3,5 233 58 100 03531,5M10 16,0 13,0
S=7,4-e27,5 1,8
1,83,5 - 5,5 233 58 100 05533,5 S=9,4-e
0,5 - 3,0 233 58 060 03022,2M6 11,0 9,0
S=5,6-e15,5 1,4
M8
1,0 - 4,5 233 58 120 04535,0M12 20,0 16,0 S=8,5-e 29,5
3,0 - 4,5 233 58 060 04523,5 S=7,1-e0,8 - 3,0 233 58 080 00126,1
14,0 11,0S=5,3-e 19,5 1,5
3,0 - 5,5 233 58 080 05527,0 S=8,2-e 18,0 1,4
233 48 050 030
26
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
RIVKLE® – Blind rivet nuts - Stainless steel
Stainless steel | Flat head | Semi-hexagonal | Open
Stainless steel | Flat head | Semi-hexagonal | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 26
1,5 - 2,5 343 66 030 0257,9
0,7 - 3,0 343 66 040 23011,6
M3
M4 7,0 6,0
S=3,5-e
S=4,0-e 7,52,3 - 3,2 343 66 030 03210,5 S=4,6-e
0,7 - 1,5 343 66 030 0158,76,0 5,0
S=2,4-e5,9 0,3
0,53,0 - 4,2 343 66 040 04212,5 S=4,6-e 6,6 0,30,7 - 3,3 343 66 050 23312,3
M5 8,0 7,0S=4,4-e 8,0 0,5
3,3 - 4,5 343 66 050 04514,5 S=6,3-e 8,2 0,3
0,8 - 1,5 343 66 100 01518,3
M10 14,0 13,0
S=3,9-e
13,91,5 - 3,0 343 66 100 03019,9 S=5,5-e3,0 - 4,5 343 66 100 04521,5 S=7,1-e4,5 - 6,0 343 66 100 06023,1 S=8,7-e0,8 - 1,5 343 66 120 01521,5
M12 17,5 16,0
S=3,8-e
17,21,5 - 3,0 343 66 120 03023,1 S=5,4-e3,0 - 4,5 343 66 120 04524,7 S=7,0-e4,5 - 6,0 343 66 120 06026,3 S=8,6-e
0,7 - 3,3 343 66 060 23314,515,4M6 10,0 9,0
S=5,7-e 8,6 0,63,0 - 4,5 343 66 060 045S=6,3-e
8,7 0,44,5 - 6,0 343 66 060 06017,0 S=7,9-e0,7 - 3,3 343 66 080 23316,1
M8 12,0 11,0S=6,5-e 9,5
0,63,3 - 5,5 343 66 080 25518,6 S=9,0-e 10,0
0,4
0,4
0,4
4,5 - 6,0 343 66 080 06019,1 S=7,9-e 10,7
1,5 - 2,5 343 76 030 02514,1M3
M4 7,0 6,0
S=3,5-e2,3 - 3,2 343 76 030 03214,8 S=4,6-e
0,7 - 1,5 343 76 030 01513,06,0 5,0
S=2,4-e10,2 0,3
0,7 - 3,0 343 76 040 03015,7 S=3,8-e 12,0 0,5
0,3
0,3
2,5 - 3,5 343 76 040 03516,7 S=4,0-e11,9
3,5 - 4,2 343 76 040 04217,5 S=4,7-e0,8 - 2,0 343 76 050 02017,8
M5 8,0 7,0S=3,2-e
14,22,0 - 3,0 343 76 050 03018,9 S=4,3-e3,0 - 4,5 343 76 050 04520,5 S=5,4-e
0,8 - 1,5 343 76 100 01526,3
M10 14,0 13,0
S=3,9-e
21,91,5 - 3,0 343 76 100 03027,9 S=5,5-e3,0 - 4,5 343 76 100 04529,5 S=7,1-e4,5 - 6,0 343 76 100 06031,1 S=8,7-e0,8 - 1,5 343 76 120 01530,5
M12 17,5 16,0
S=3,8-e
26,21,5 - 3,0 343 76 120 03032,1 S=5,4-e3,0 - 4,5 343 76 120 04533,7 S=7,0-e4,5 - 6,0 343 76 120 06035,3 S=8,6-e
1,5 - 3,0 343 76 060 03018,820,4
M6S=4,7-e
13,6
0,8 - 1,5 343 76 060 01517,3
10,0 9,0
S=3,1-e 13,7
0,4
0,4
0,4
0,4
3,0 - 4,5 343 76 060 045S=6,3-e4,5 - 6,0 343 76 060 06022,0 S=7,9-e
1,5 - 3,0 343 76 080 03021,9M8
S=4,7-e0,8 - 1,5 343 76 080 01520,3
12,0 11,0
S=3,3-e
16,73,0 - 4,5 343 76 080 04523,5 S=6,3-e4,5 - 6,0 343 76 080 06025,1 S=7,9-e
27
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
H><
><
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
H><
><
RIVKLE® Plus
Stainless steel | Thin head | Knurled | Open
Stainless steel | Thin head | Knurled | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:45 Page 27
1,5 - 2,5 233 06 030 02510,4
0,7 - 3,0 233 06 040 23011,9
M3
M4 8,0 6,0
S=3,5-e
S=4,0-e 6,52,3 - 3,2 233 06 030 03211,0 S=4,4-e
0,7 - 1,5 233 06 030 0159,37,0 5,0
S=2,4-e5,9 1,0
1,0
1,0
3,3 - 4,2 233 06 040 04212,4 S=4,7-e 6,00,7 - 3,3 233 06 050 23312,7
M5 9,0 7,0S=5,3-e 7,2
3,3 - 4,5 233 06 050 04514,9 S=5,4-e 7,8
0,8 - 1,5 233 06 100 01519,8
M10 16,0 13,0
S=3,9-e
13,9 2,0
2,0
1,5 - 3,0 233 06 100 03021,4 S=5,5-e3,0 - 4,5 233 06 100 04523,0 S=7,1-e4,5 - 6,0 233 06 100 06024,6 S=8,7-e0,8 - 1,5 233 06 120 01523,0
M12 20,0 16,0
S=3,8-e
17,21,5 - 3,0 233 06 120 03024,6 S=5,4-e3,0 - 4,5 233 06 120 04526,2 S=7,0-e4,5 - 6,0 233 06 120 06027,8 S=8,6-e
0,7 - 3,3 233 06 060 23315,216,4M6
12,0
11,09,0
S=5,7-e8,6 1,5
1,5
3,0 - 4,5 233 06 060 045S=6,3-e4,5 - 6,0 233 06 060 06018,2 S=7,9-e0,7 - 3,3 233 06 080 23316,9
M8 14,0 11,0S=6,5-e
9,53,0 - 5,5 233 06 080 25519,0 S=8,5-e4,5 - 6,0 233 06 080 06020,0 S=7,9-e 10,6
1,5 - 2,5 233 26 030 02514,7
0,7 - 1,5 233 26 040 01514,8
M3
M4 8,0 6,0
S=3,5-e
S=2,6-e
11,2
2,3 - 3,2 233 26 030 03215,4 S=4,4-e
0,7 - 1,5 233 26 030 01513,67,0 5,0
S=2,4-e10,2 1,0
1,0
1,0
0,7 - 3,0 233 26 040 03016,2 S=4,8-e2,5 - 3,5 233 26 040 03516,7 S=4,7-e3,5 - 4,2 233 26 040 04217,5 S=5,5-e0,7 - 1,5 233 26 050 015
233 26 050 03017,8
M5 9,0 7,0S=2,8-e
14,01,5 - 3,019,3 S=4,5-e
13,83,0 - 4,0 233 26 050 04020,4 S=5,6-e
0,8 - 1,5 233 26 100 01527,8
M10 16,0 13,0
S=3,9-e
21,9 2,0
2,0
1,5 - 3,0 233 26 100 03029,4 S=5,5-e3,0 - 4,5 233 26 100 04531,0 S=7,1-e4,5 - 6,0 233 26 100 06032,6 S=8,7-e0,8 - 1,5 233 26 120 01532,0
M12 20,0 16,0
S=3,8-e
26,21,5 - 3,0 233 26 120 03033,6 S=5,4-e3,0 - 4,5 233 26 120 04535,2 S=7,0-e4,5 - 6,0 233 26 120 06036,8 S=8,6-e
1,5 - 3,0 233 26 060 03019,821,4
M6S=4,7-e
0,8 - 1,5 233 26 060 01518,3
11,0 9,0
S=3,1-e
13,7 1,5
1,5
3,0 - 4,5 233 26 060 045S=6,3-e4,5 - 6,0 233 26 060 06023,2 S=7,9-e
1,5 - 3,0 233 26 080 03022,8M8
S=4,7-e0,8 - 1,5 233 26 080 01521,3
14,0 11,0
S=3,2-e
16,63,0 - 4,5 233 26 080 04524,4 S=6,3-e4,5 - 6,0 233 26 080 06026,0 S=7,9-e
28
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
RIVKLE® – Blind rivet nuts - Stainless steel
Stainless steel | Flat head | Knurled | Open
Stainless steel | Flat head | Knurled | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 28
2,0 - 3,0 233 16 030 0309,91,3 - 2,0 233 16 040 0209,3
M3
M4 8,0 6,0
S=4,0-eS=3,1-e
6,2
1,3 - 2,0 233 16 030 0208,87,0 5,0
S=2,9-e5,9 0,1
0,1
0,1
0,1
0,1
0,1
0,1
2,0 - 3,0 233 16 040 03010,3 S=4,1-e3,0 - 4,0 233 16 040 04011,4 S=6,5-e1,5 - 2,0 233 16 050 02011,3
M5 9,0 7,0S=3,9-e
8,3
7,82,0 - 3,0 233 16 050 03012,3 S=5,0-e3,0 - 4,0 233 16 050 04013,4 S=5,6-e
1,5 - 3,0 233 16 100 03019,4M10 16,0 13,0
S=5,5-e13,93,0 - 4,5 233 16 100 04521,0 S=7,0-e
4,5 - 6,0 233 16 100 06022,6 S=8,7-e1,5 - 3,0 233 16 120 03022,6
M12 19,0 16,0S=5,4-e
17,23,0 - 4,5 233 16 120 04524,2 S=7,0-e4,5 - 6,0 233 16 120 06025,8 S=8,6-e
1,5 - 3,0 233 16 060 03013,314,3
M6 11,0 9,0
S=5,1-e8,83,0 - 4,0 233 16 060 040S=6,5-e
8,64,0 - 5,0 233 16 060 05015,4 S=6,9-e5,0 - 6,0 233 16 060 06016,5 S=8,0-e1,5 - 3,0 233 16 080 03015,3
M8 14,0 11,0
S=4,7-e
10,63,0 - 4,0 233 16 080 04016,3 S=5,8-e4,0 - 5,0 233 16 080 05017,4 S=6,9-e5,0 - 6,0 233 16 080 06018,5
0,9
0,9
0,9
0,9
1,4
1,4
1,4
S=8,0-e
14,214,3
11,2
13,110,2
15,316,417,3
13,918,319,4
27,421,929,0
30,631,6
26,233,234,8
18,319,3
13,620,421,521,3
16,522,323,424,5
2,0 - 3,0 233 36 030 0301,3 - 2,0 233 36 040 020
M3
M4 8,0 6,0
S=4,0-eS=3,1-e
1,3 - 2,0 233 36 030 0207,0 5,0
S=2,9-e0,1
0,1
0,1
0,1
0,1
0,1
0,1
2,0 - 3,0 233 36 040 030S=4,1-e3,0 - 4,0 233 36 040 040S=6,5-e1,5 - 2,0 233 36 050 020
M5 9,0 7,0S=3,4-e
2,0 - 3,0 233 36 050 030S=4,5-e3,0 - 4,0 233 36 050 040S=5,6-e
1,5 - 3,0 233 36 100 030M10 16,0 13,0
S=5,5-e3,0 - 4,5 233 36 100 045S=7,0-e4,5 - 6,0 233 36 100 060S=8,7-e1,5 - 3,0 233 36 120 030
M12 19,0 16,0S=5,4-e
3,0 - 4,5 233 36 120 045S=7,0-e4,5 - 6,0 233 36 120 060S=8,6-e
1,5 - 3,0 233 36 060 030
M6 11,0 9,0
S=4,7-e3,0 - 4,0 233 36 060 040S=5,8-e4,0 - 5,0 233 36 060 050S=6,9-e5,0 - 6,0 233 36 060 060S=8,0-e1,5 - 3,0 233 36 080 030
M8 14,0 11,0
S=4,8-e3,0 - 4,0 233 36 080 040S=5,8-e4,0 - 5,0 233 36 080 050S=6,9-e5,0 - 6,0 233 36 080 060
0,9
0,9
0,9
0,9
1,4
1,4
1,4
S=8,0-e
29
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
Stainless steel | Countersunk head | Knurled | Open
Stainless steel | Countersunk head | Knurled | Closed
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 29
M8
30
1,30 - 2,50 233 18 040 25011,3M4 8,0 6,0
S=4,4-e 6,85,4
0,1
0,1
0,1
0,1
0,1
1,75 - 3,25 233 18 040 32510,8 S=4,5-e1,50 - 3,00 233 18 050 30012,5
M59,29,6
7,0S=4,0-e
8,53,00 - 4,00 233 18 050 40013,8 S=5,0-e
1,50 - 3,00 233 18 100 30020,4M10 15,5 13,0
S=4,2-e16,23,00 - 4,50 233 18 100 45022,0 S=6,7-e
4,50 - 6,00 233 18 100 60023,6 S=7,4-e
1,50 - 3,00 233 18 060 30014,816,6M6
11,5
11,39,0
S=4,9-e 9,53,00 - 4,50 233 18 060 450S=5,4-e
11,218,2 4,50 - 6,00 233 18 060 600S=7,0-e
1,50 - 3,00 233 18 080 30016,3
13,5
13,111,0
S=5,0-e 10,53,00 - 4,50 233 18 080 45018,1 S=5,9-e
12,24,50 - 6,00 233 18 080 60019,7
1,3
1,5
1,5
1,5
1,5
S=7,5-e
0,5 - 1,5 343 08 030 1508,80,5 - 2,0 343 08 040 20010,40,5 - 3,0 343 08 050 30011,6
M3M4M5
5,37,07,7
4,76,47,1
S=2,8-eS=3,5-eS=5,0-e
5,57,37,3
0,40,50,60,60,7 - 3,0
0,7 - 3,0343 08 060 30014,3M6 10,2 9,5 S=5,7-e 9,3343 08 080 30016,6M8 11,3 10,5 S=6,1-e 10,5 0,7
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
RIVKLE® – Blind rivet nuts - Stainless steel
Stainless steel | Countersunk head | Plain | Open
Stainless steel | Thin head | Plain | Open
Stainlesssteel
For holes with imperial dimensions
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 30
31
0,50 - 2,00 233 08 040 02012,0M4 9,0 6,0
S=3,5-e6,8 1,0
1,0
2,00 - 3,50 233 08 040 03513,5 S=5,2-e0,50 - 3,00 233 08 050 03012,5
M510,09,0
7,0S=4,7-e 8,0
8,53,00 - 4,00 233 08 050 40014,3 S=5,0-e
1,00 - 3,00 233 08 100 30022,4M10 16,0 13,0
S=4,6-e16,0 2,03,00 - 4,50 233 08 100 45024,0 S=6,7-e
4,50 - 6,00 233 08 100 60025,6 S=7,8-e
0,80 - 3,00 233 08 060 30016,518,0
M6 12,0 9,0S=4,7-e
10,0 1,5
1,5
3,00 - 4,50 233 08 060 450S=6,3-e0,80 - 3,00 233 08 080 30016,5
M8 14,0 11,0S=4,7-e 9,5
10,03,00 - 4,50 233 08 080 45019,4 S=6,1-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
Stainless steel | Flat head | Plain | Open
Stainlesssteel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 31
32
0,5 - 2,0 233 04 040 02012,0
0,5 - 3,0233 04 050 03012,5233 04 060 03016,0
M4M5M6
9,010,012,0
6,07,09,0
9 50012 00015 000
7,57,510,0
1,0
1,5 233 04 080 03017,5M8 15,0 11,0 20 000 11,2
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
Ø
><
><
e (min - max)(mm)
><
0,5 - 2,0 233 24 040 02016,0
0,5 - 3,0233 24 050 03018,5233 24 060 03023,0
M4M5M6
9,010,012,0
6,07,09,0
9 50012 00015 000
11,513,217,0
1,0
1,5 233 24 080 03025,0M8 15,0 11,0 20 000 18,7
0,5 - 3,0343 64 050 03012,0343 64 060 03014,5
M5M6
7,59,5
7,09,0
12 00015 000
7,29,4 0,5
343 64 080 03016,0M8 11,5 11,0 20 000 11,2
><
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
Ø
><
><
e (min - max)(mm)
><
><
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
Ø
><
><
e (min - max)(mm)
><
><
Range dedicated to industry use. In case of non metalic support, please contact us
RIVKLE® – High corrosion resistance: A4
Stainless steel A4 | Flat head | Plain | Open
Stainless steel A4 | Flat head | Plain | Closed
Stainless steel A4 | Thin head | Plain | Open
StainlesssteelA4
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 32
33
0,5 - 2,0 343 74 040 02015,5
0,5 - 3,0343 74 050 03018,0343 74 060 03021,5
M4M5M6
6,57,59,5
6,07,09,0
9 50012 00015 000
11,613,216,7
0,5
343 74 080 03024,0M8 11,5 11,0 20 000 19,2
0,5 - 2,0 233 44 040 02012,0
0,5 - 3,0233 44 050 03012,5233 44 060 03016,0
M4M5M6
9,010,012,0
6,07,09,0
9 50012 00015 000
7,57,29,3
1,0
1,5 233 44 080 03017,5M8 15,0 11,0 20 000 11,0
0,5 - 2,0 343 44 040 02011,0
0,5 - 3,0343 44 050 03012,0343 44 060 03014,5
M4M5M6
6,57,59,5
6,07,09,0
9 50012 00015 000
7,57,29,3
0,5
343 44 080 03016,0M8 11,5 11,0 20 000 11,0
B
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
Ø
><
><
e (min - max)(mm)
><
><
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
><
><
e (min - max)(mm)
><
><H
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
><
><
e (min - max)(mm)
><
><H
Range dedicated to industry use. In case of non metalic support, please contact us
Stainless steel A4 | Thin head | Plain | Closed
Stainless steel A4 | Flat head | Semi-hexagonal | Open
Stainless steel A4 | Thin head | Semi-hexagonal | Open
StainlesssteelA4
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 33
34
2,00 - 3,50 233 00 030 03510,750,25 - 2,50 233 00 040 02511,0
M3
M4 6,0
S=4,5-eS=4,1-e
0,50 - 2,00 233 00 030 02010,5 8,07,59,010,010,011,0
13,0
16,0
19,0
5,0S=3,2-e 6,5
5,56,36,47,88,310,49,712,711,3
16,6
0,751,01,00,75
1,0
3,00 - 4,50 233 00 040 04613,0 S=5,9-e0,50 - 3,00 233 00 050 03013,6
M5 7,0S=4,5-e
3,00 - 5,50 233 00 050 05616,0 S=6,7-e
0,50 - 3,00 233 00 100 03525,0M10 13,0
S=6,5-e2,03,50 - 6,00 233 00 100 06027,7 S=9,0-e
0,50 - 3,00 233 00 060 03016,6M6 9,0
S=5,0-e1,5
1,5M8
3,00 - 5,50 233 00 060 05618,0 S=6,8-e0,50 - 3,00 233 00 080 03020,0
20,011,0
S=5,8-e3,00 - 5,50 233 00 080 056S=7,2-e
2,00 - 3,50 233 20 030 03515,10,50 - 3,00 233 20 040 03015,5
M3
M410,09,0
6,0
S=4,5-eS=4,0-e 10,8
11,3
0,25 - 2,00 233 20 030 02013,57,5 5,0
S=3,0-e9,3 1,0
0,751,0
1,0
2,50 - 4,50 233 20 040 04518,1 S=6,3-e0,50 - 3,00 233 20 050 03119,0
M511,010,0
7,0S=4,5-e 13,5
14,03,00 - 5,50 233 20 050 05521,9 S=7,0-e
M10 19,0 13,0 26,5 2,03,50 - 6,00 233 20 100 06037,6 S=9,0-e
0,50 - 3,00 233 20 060 03123,0M6 13,0 9,0
S=4,5-e 17,317,4
1,5
1,5M8
3,00 - 5,50 233 20 060 05526,3 S=7,5-e0,50 - 3,00 233 20 080 03124,0
16,0 11,0S=4,5-e 18,0
21,03,00 - 5,50 233 20 080 05531,0 S=8,5-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
RIVKLE® – Blind rivet nuts - Aluminium
Aluminium | Flat head | Plain | Open
Aluminium | Flat head | Plain | Closed
Aluminium
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 34
1,3
1,3
1,5
1,5
1,5
1,5
1,3
1,51,3
1,5
1,5
1,5
1,5
35
3,5 - 5,0 233 10 030 05011,81,7 - 3,5 233 10 040 03611,5
M3
M49,08,2
6,0
S=6,0-eS=4,4-e
6,7
1,5 - 3,5 233 10 030 03510,27,2 5,0
S=4,5-e5,6 0,1
0,1
0,1
0,1
0,1
0,1
3,5 - 5,0 233 10 040 05012,8 S=5,9-e1,7 - 4,0 233 10 050 04013,0
M510,09,6
7,0S=5,5-e
7,84,0 - 6,5 233 10 050 06516,3 S=8,0-e
1,7 - 4,5 233 10 100 04624,0M10 15,5
12,513,0
S=7,5-e16,64,5 - 6,5 233 10 100 06526,1 S=9,5-e
1,7 - 4,5 233 10 060 04617,0M6
12,011,7
9,0S=6,3-e 10,4
12,7
M8
4,5 - 6,5 233 10 060 06518,7 S=8,3-e1,7 - 4,5 233 10 080 04619,0 14,0
13,511,0
S=7,5-e12,74,5 - 6,5 233 10 080 06522,2 S=9,5-e
3,5 - 5,0 233 30 030 05015,71,5 - 3,5 233 30 040 03516,3
M3
M4 8,2 6,0
S=6,0-eS=4,8-e
11,5
1,5 - 3,5 233 30 030 03514,17,2 5,0
S=4,5-e9,5 0,1
0,13,5 - 5,0 233 30 040 05017,9 S=6,3-e1,5 - 4,5 233 30 050 04519,4M5 9,6 7,0 S=6,0-e 13,5 0,1
0,1
0,1
0,11,5 - 4,5 233 30 100 04533,9
M10 15,5 13,0S=7,5-e
26,54,5 - 6,5 233 30 100 06536,0 S=9,5-e
1,5 - 4,5 233 30 060 04523,6M6 11,7 9,0
S=6,3-e17,4
M8
4,5 - 6,5 233 30 060 06525,7 S=8,3-e1,5 - 4,5 233 30 080 04528,4
13,5 11,0S=7,5-e
21,04,5 - 6,5 233 30 080 06530,5 S=9,5-e
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)>
<
><
><
>< Ø
+0,1/0(mm)
L2(mm)
E max(mm)
S(mm)
d(mm)
L(mm)
B(mm)
f(mm) << << <<e (min - max)
(mm)
><
><
><
>< Ø
Aluminium | Countersunk head | Plain | Open
Aluminium | Countersunk head | Plain | Closed
Aluminium
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 35
36
10 (ISO 898-2)10.9 (ISO 898-1)
Ø
20 900 N38 100 N60 300 N88 500 N
20 900 N38 100 N60 300 N88 500 N
16 700 N30 400 N48 100 N70 000 N
M6M8M10M12
HRT
��
��
��
��
12 (ISO 898-2)12.9 (ISO 898-1)23 100 N42 500 N67 300 N100 300 N
23 100 N42 500 N67 300 N100 300 N
19 500 N35 500 N56 300 N81 800 N
M6M8M10M12
��
��
��
��
�
�
8 (ISO 898-2)8.8 (ISO 898-1)12 140 N17 200 N
12 140 N17 200 N
8 230 N11 600 N
M5M6
��
�
31 800 N31 800 N21 200 NM8
�
��
HRT
The required setting force is dependent upon the screw assembly method (elastic or over elastic).In order to avoid any setting of the RIVKLE® HRT during screw assembly, we recommend to apply a setting loadin accordance to the preload of the screw.Please ask Böllhoff in case you need any assistance.
Steel 10.9
Steel 12.9
Aluminium
Forged head to ensure rigidity under load
Area of ductile steel (or aluminium) enablesinstallation with standard RIVKLE® tools
Area of hardened steel (or aluminium)to ensure rigidity under load
Advantages:
� Increased tightening torque enables increased preload in the joint
� Allows the use of smaller diameter thread
� Weight saving
� Corrosion resistance (for aluminium versions)
� Ability to completely recycle products (for aluminium versions)
RIVKLE® HRT – High Resistance Thread
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 36
37
+0,1/0(mm)
1,5M6 14,0 9,0 11,51,0 - 3,0 232 91 060 50218,6 S=4,5-e
M101,0 - 3,5 232 91 100 50327,0 20,0
13,0S=6,7-e 17,5
2,0
2,02,0 - 5,0 232 91 100 50128,5 24,0 S=9,5-e 17,0
M12x1,5 1,0 - 4,0 232 91 124 501
X
XXX
-
1,5M8 17,0 11,0 16,01,0 - 3,0 232 91 080 50423,6 S=6,5-e X -3,0 - 6,0 232 49 080 50226,6 S=9,6-e X X
XXX33,0 27,0 16,0 S=10,5-e 22,0
L2(mm)
E(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<e (min - max)
(mm)
>< >
>
<
<
H><
10.9 12.9
M5 0,5 - 3,0 232 90 050 50118,1 14,0 9,0 S=6,5-e 11,50,5 - 3,014,0 9,0 S=6,5-e 11,5
1,51,51,5
M6M8
232 40 060 03018,60,5 - 3,5 232 40 080 03023,6 17,0 11,0 S=7,0-e 16,0
L2 max(mm)
E max(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
+0,1/0(mm)
><
><
e (min - max)(mm)
><
><H
HRT
XXX
8.8
A wide range of plating finishes are available. Other configurations are available upon request.
Optimized for aluminium and magnesium workpieces.Weight saving and corrosion resistant solutions for external applications.
Steel HRT | Flat head | Hexagonal | Open
RIVKLE®HRT - Steel
Aluminium HRT | Flat head | Hexagonal | Open
RIVKLE®HRT - Aluminum
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 37
38
RIVKLE® SFC
12 000 N18 000 N
15 000 NM6M8
8.8 >
Ø
27 000 N
SFC
STANDARD
RIVKLE® reusable*RIVKLE® reusable*
Similar performance to standard RIVKLE®
*RIVKLE® is more resistant than screw property class 8.8
Unique buldge
RIVKLE® SFC sectional view
Fiber-reinforcedpolymer material
Clamp load is uniformlydistributed around the hole
RIVKLE® SFC – Smart For Composite
Advantages:
� No delamination risks (due to the fastener)
� Reduction of crack risk at injection welding line
� Possible reduction of distance to edge
� Larger hole tolerance
� Allows off axis setting
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 38
39
2,0 - 3,5 233 91 060 968233 91 060 971
20,7
2,0 - 3,5 233 91 060 96920,73,5 - 5,0 233 91 060 97022,2
22,023,5
M6
13,03,5 - 5,022,2 13,0
18,018,0
9,1 12 000 11,01,5
2,0 - 3,5 233 91 080 848M8 20,0 11,1 18 000
3,5 - 5,0 233 91 080 84912,0
L2 max(mm)
E(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
-0,1/+0,5(mm)
e (min - max)(mm)
><
><
><Ø
><
1,5 - 3,0 233 94 060 59826,6M6 H12 9,1 14 000 17,6 1,5
L2 max(mm)
E(mm)
D(mm)
L(mm)
B(mm) (N) << <<
<
<
-0,1/+0,3(mm)
e (min - max)(mm)
><
><
><Ø
><
RIVKLE SFC
SFC
We recommend to use the specific mandrel 236 91 306 523
A dedicated brochure has been created for this product. Available upon request.
Available in alternative configurations upon request (stud, underhead seal, etc..).Grip range could be increased in certain specific conditions when associated with substrate material in these casesa prototype validation will be necessary (Please contact us).
RIVKLE® SFC is fully compatible with the whole Böllhoff RIVKLE® setting tool range (including fully automaticinstallation for mass production).
Stainless steel A4
Steel
RIVKLE®SFC - Stainless steel
RIVKLE®SFC - Steel
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 39
40
A
D
C
E F
B
2 130 N 900 N 6 760 N 100 N 600 N 1 250 N
5 400 N
e = 0,76 mm
2 750 N 8 400 N 700 N 1 620 N 3 220 NRIVKLE® PN M6
RIVKLE®M6
A
e = 2,92 mm
B
e = 6,29 mm
C
e = 3,04 mm
D
e = 1,65 mm
E
e = 4,69 mm
F
�
�
e
PN
Test according to BÖLLHOFF specifications.
Rotoformed plastic
Pultruded plastic
Vinyl extrusion
Steel SMC plastic Blow-moulded plastic
Advantages:
� Large clamping area for higher pull out resistance (soft and/or thin materials)
� Large bearing surface to reinforce the workpiece
� Minimal radial stresses during installation to reduce the risk of breakage in softor fragile materials
� Available in steel (aluminium and stainless steel on request) in thread sizesM4 to M10
RIVKLE® PN – Ultimate pull out force
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 40
41
M5 0,5 - 3,0 668 70 511 03022,0 12,7 7,48 7,62 9,9 0,96M6 0,5 - 5,0
0,5 - 5,0668 70 611 05026,9 15,9 8,80 8,93 12,8 1,50
M8 668 70 811 05030,5 19,0
7,478,7911,10 11,11 11,50 14,5 1,57
L2(mm)
E(mm)
d(mm)
L(mm)
B(mm)
D(mm) << <<e (min - max)
(mm)
>< >
> <>
<
<
MIN(mm)
Ø
MAX(mm)
Ø><
L2(mm)
E(mm)
d(mm)
L(mm)
B(mm)
D(mm) << <<e (min - max)
(mm)
>< >
> <>
<
<
MIN(mm)
Ø
MAX(mm)
Ø><
32,8
M50,50 - 4,45 668 30 511 04422,0
12,7 7,48 7,58
8,90
9,9
M60,50 - 7,10
0,50 - 7,100,50 - 7,10
26,915,9 8,80 12,8 1,50
M8 668 30 811 07130,5 19,0
7,47M4 0,50 - 3,80 668 30 411 03817,6 11,1 6,13 6,25 8,6 0,96
0,954,45 - 8,10 668 30 511 08123,8 7,97
6,12
8,79
11,10 11,11 11,50 14,5 1,57M10 668 31 011 07133,2 22,2 13,06 13,07 13,26 15,8 2,24
668 30 611 0717,10 - 12,7 668 30 611 127
PN
RIVKLE®PN - Tooling
Please use dedicated tooling, see page 56.
RIVKLE®PNC - Extended Grip Range
Steel | Flat head | Slotted | Open
RIVKLE®PNP
Steel | Flat head | Slotted | Open
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 41
42
15,0 mm15,0 mm15,5 mm20,5 mm
2,0 Nm2,0 Nm4,5 Nm7,0 Nm
150 N150 N250 N400 N
M4M5M6M8
Ø ><max
The "RIVKLE® Elastic" female thread is manufactured to standard commercial tolerances (6H as per ISO 68-1) and can also be manufacturedwith Imperial threads.
RIVKLE® Elastic – Vibration damping characteristics
Advantages:
� Vibration and noise damping
� Electrical and thermal insulation
� Tolerancecompensation – Stress reduction• Stresses caused by tolerance statck-up (on component to be fastened)• Thermal expansion• Dynamic fastener
� Simple-to-fit. Setting (bulge clamping) takes place during assembly
� Easy to disassemble and re-use.
� Permits flexibility in design thanks to dimensional variability
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 42
43
M16
243 10 060 300M5 243 10 050 30015,0M6 19,3 18,0 13,0 + 0,2 10,0 4,3
0,5 - 3,00,5 - 3,0
17,7 10,3 + 0,2 9,0 3,7
L2(mm)
E(mm)
d(mm)
L(mm)
B(mm) << <<e (min - max)
(mm)
>< >
>
<
<
(mm)
Ø><
L2(mm)
E(mm)
d(mm)
L(mm)
B(mm) << <<e (min - max)
(mm)
>< >
>
<
<
(mm)
Ø><
243 00 060 300M5 243 00 050 300M6 17,0 18,0 10,0 2,0
0,5 - 3,00,5 - 3,0
10,3 + 0,213,0 + 0,2
15,5 15,0 9,0 1,5
� For components made from steel with a pilot hole (DIN ISO 273 standard)
RIVKLE® Elastic - Without washerFlat head | Without washer | Open
� For components made from plastic, aluminum and steel with a slotted hole
RIVKLE® Elastic - With washerFlat head | With washer | Open
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:46 Page 43
44
10,1 mm13,0 mm15,0 mm
6,0 Nm10,0 Nm24,0 Nm
8 000 N11 000 N21 000 N
M5M6M8
Ø ><max
� � � �
Steel
Setting
Spin on Insert Upset Spin off
RIVKLE® – Standard blind rivet Studs
Advantages:
� Easily pre-position mating parts prior to tightening (useful for heavy or largecomponents or where the mountings are hidden)
� Create a reusable stud thread equivalent to class 8.8 screw
� Offers all the advantages of the RIVKLE® range, i.e. ease and economyof installation, flexibility and environmental sustainability
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 44
45
emin - max
(mm)
>< >
>
<
<
L2(mm)
E(mm)
L(mm)
S(mm)
d(mm)
B(mm)
L1(mm) << << < << <
><
+0,1/0(mm)
emin - max
(mm)
0,5 - 3,0
0,5 - 3,0
0,5 - 3,0
372 27 050 110
10,0M5 11,2 7,0 S=5,0-e 5,0 1,0372 27 050 115372 27 050 120
372 27 060 11513,0M6 14,2 9,0 S=5,2-e
S=5,7-e
8,5 1,5
8,5 1,5
372 27 060 120372 27 060 125372 27 080 115
16,0M8 15,6 11,0 372 27 080 120
7,5 - 12,012,5 - 17,017,5 - 22,0
372 27 050 12522,5 - 27,014,0 - 18,519,0 - 23,524,0 - 28,513,5 - 18,018,5 - 23,0
372 27 080 12523,5 - 28,0
>< >
>
<
<
L2(mm)
E(mm)
L(mm)
S(mm)
d(mm)
B(mm)
L1(mm) << << < << <
Ø><
+0,1/0(mm)
0,5 - 3,013,0M614,3
9,0
11,0
S=5,8-e8,0 1,5
0,5 - 3,0 S=5,8-e 1,5
27,5 - 32,0
372 91 080 50216,0M8 15,5 9,0
19,0 - 23,5372 91 080 50728,5 - 33,0
372 91 060 50212,8 S=4,8-e 15,0 - 21,0 372 91 060 506
H
Available on request in other materials (stainless steel, …) and other dimensions.
Steel | Flat head | Hexagonal
Steel | Flat head | Knurled
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 45
46
8 000 N
18 000 N
10 000 NM512 000 N 15 000 NM6
M8
8.8 >
Ø
27 000 N
Same performance as standard RIVKLE®
RIVKLE® reusable*
RIVKLE® reusable*RIVKLE® reusable*
*RIVKLE® is more resistant than screw property class 8.8
RIVKLE® – Waterproof
Advantages:
� Integrated sealing function
� Pre-applied seal
� Stable tensile strength in the mating screw
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 46
47
1,5 - 3,0 233 96 050 50419,30,8 - 1,5 233 96 060 50818,3
M5
M6 11,0 9,1
S=4,5-eS=3,1-e
13,7
0,7 - 1,5 233 96 050 50317,89,0 7,1
S=2,8-e14,0 1,0
1,5
1,5
1,5 - 3,0 233 96 060 50919,8 S=4,7-e0,8 - 1,5 233 96 080 50321,3
M8 14,0 11,1S=3,2-e
16,6+1,5 - 3,0 233 96 080 50422,8 S=4,7-e
L2(mm)
E(mm)
S(mm)
d(mm)
L(mm)
B(mm) << << <<
>< >
<
e (min - max)(mm)
><
+0,1/0(mm)
Ø><
Stainless steel
Flat Thin Extra thin Countersunk Setting rangeinfluence
Automationcapability
OversizeholeTemperatureProcess type Water
resistance
O-Ring
240°CAddition
of an underhead o-ring
Over-moulding
Over-moulding
Coating andheating
210°C
180°C
150°C
IPX7(EN 60529)
No Yes No
No Yes No
No Yes No
Yes No Yes
IPX7(EN 60529)
IPX7(EN 60529)
IPX4 / IPX7*(EN 60529)
Injected polyamidering
Injected plasticjoint
SealcotePre-appliedsealing ++ + ++
+++
++
E > 2,0mm
+++
�
�
E > 2,5mm
�
�
Head
T°C Max
* tests should be undertaken in actual application conditions
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 47
48
M6 2,6 - 5,4
ZnNi8A/Fe
M6 3,6 - 3,9
233 91 060 936
233 97 060 727
Øe (min - max)(mm)*
><
ZnNi8A/Fe
M6 2,4 - 4,5 233 97 060 707
M8 4,0 - 6,5 233 97 080 705
Øe (min - max)(mm)*
><
Material
Steel
Material
Steel
RIVKLE® – Special designs
Chamber thickness is deeper than the thickness of the parent material to avoid radial deformation and ensure thethat bulge is generated outside the part and comes into contact with the under-side of panel.
* grip min is unique grip if polymer on bulge side
RIVKLE® - Shouldered
2 anti-turn functions. The sharp edges (knurled) behaviour is linked to grip range. Ribs under head give the bestresults but should be avoided on fragile materials (Eg: Thermoset) due to risk of cracking.
RIVKLE® - Knurled shank and under-head ribs
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 48
49
RIVKLE® Elliptic HeadEfficient anti-turn function for soft substrates
RIVKLE® - Other concepts
Designed to provide high strength, self locking blind rivet nuts in carbon reinforcedcomposite. RIVNUT® Aero retains it’s locking function over time (even after severalre-uses) and can be installed from one side (no access hole necessary).
RIVNUT® Aero - RIVNUT® Aero 2A
RIVKLE® Star HeadFlush finish with anti-turn - Ideal for wood
A dedicated brochure has been created for this product, please contact Böllhoff.
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 49
50
M14
M14
ESA � � �
� � � � � � �
M12 M14M10M8M6M5M4M3
� � � � �
� � �
� � � � �ES 51
EPK
EPK C
SAC 310
HSA
51
51
52
52
52
54
54
55
55
56
56
56
57
61
61
61
61
61
61
� � � � �
� � � �
� � � � � � �
�� � � �
� � � �EPK HP
* RIVKLE® PN**RIVKLE® & RIVKLE® PN
� � � �
� � � � �
� � � �RIVKLE® P1007
** ** ** **
* * * * *
� � �
�**
�
�
RIVKLE® EP X009 � � ������
**
RIVKLE® P2005
� � � �BRK 10
� � � �BRK 01
RIVKLE® P2007 PN
RIVKLE® P2007
�� � � � �RIVKLE® B2007
RIVKLE® P3007 PN
OPTEX
RIVKLE®M2007
RIVKLE® P3007
Automated tools
Semi-automated tools
Manual tools
Power tools
RIVKLE® – Assembly tools
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 50
51
235 119 00000
M14M12M10M8M6M5M4M3ø RIVKLE®
� � � �
� � �
�� � �
600 g
M14
M10M8M6M4 M5M10M8
235 119 00501
235 119 00502
x1
x1 x50 x50 x50
M6
x50
M5
x50
M4
x50
M3
x50
M14
M10M8M6M4 M5M10M8
235 302 01001
235 302 01002
x1
x1
x50 x25 x25
M6
x25
M5
x25
M4
x50
M3
235 302 010001200 g
M14M12M10M8M6M5M4M3ø RIVKLE®
� � � � �
� � � � �
� � � ��
RIVKLE® Plus
RIVKLE® Plus
RIVKLE® M2007 Kit
Tooling included (M5 - M12)
Steel
Aluminium
Stainless steel
RIVKLE®M2007 - Manual assembly tool
BRK 01 - Manual assembly tool
Tooling included (M3 - M6)
BRK01 Kit
Steel
Aluminium
Stainless steel
RIVKLE® – Hand operated assembly tools
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 51
52
235 110 00000
M8M6M5ø RIVKLE®
0,5 - 2,5 mm
2100 g
><
235 120 000001900 g
235 118 000002700 g
M14M12M10M8M6M5M4M3ø RIVKLE®
�� � � �
�� � �
� � �
� � �
�
� � � � �
M14M12M10M8M6M5M4M3ø RIVKLE®
� � � �
� � �
� � ��
Tooling included (M5 - M8)
Steel
Aluminium
Steel
Aluminium
Stainless steel
Tooling not included
Tooling included (M5 - M10)
Steel
Aluminium
Stainless steel
RIVKLE® – Hand operated assembly tools
BRK 10 - Lever type assembly tool
ES 51 - Hydraulic manual assembly tool
OPTEX - Hexagonal punching and assembly tool
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 52
235 302 XX 030
53
M3 M4 M5 M6
03 04 05 06
ø RIVKLE®
235 119 XX 001+
BRK 01
M5 M6 M8 M10 M12
05 06 08 10 12
05 06 08 10 12
ø RIVKLE®
235 302 XX 020
RIVKLE®M2007
235 108 XX 030
M6 M8 M10 M12 M14
06 08 10 12 14
06 08 10 12 14
ø RIVKLE®
235 108 XX 020
ES 51
235 110 67 006
M5 M6 M8
05 06 08
235 110 XX 030 05 06 08
235 110 XX 021 05 06 08
235 110 XX 031 05 06 08
ø RIVKLE®
235 110 XX 020
OPTEX
M5 M6 M8 M10
05 06 08 10
ø RIVKLE®
235 120 XX 001+
BRK 10
Mandrel
Nut
Anvil
Punch
Matrix
Mandrel
Anvil
Mandrel + Anvil
Mandrel
Anvil
Mandrel + Anvil
Tooling equipment
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 53
54
M14M12M10M8M6M5M4M3
� � � �
� � �
�
�
�
�
�
�
�
�
�
� � � �
236 155 01000Fmax = 21 000 N
ø RIVKLE®
M14M12M10M8M6M5M4M3
�
�
�
�
�
�
�
�
�
�
�
� �
ø RIVKLE®
2600 g
236 157 010001800 gF = 3 500 N => 13 000 N
RIVKLE®P2005
Steel
Aluminium
Stainless steel
Steel
Aluminium
Stainless steel
Generic code for a tool with unique force cartridge: 282 520 00 005It is also possible to get mono cartridge alone. Please contact Böllhoff.
Tooling not included(see page 58)
Pressure controlled installation equipment
RIVKLE®P1007 - Lightweight tool for speed and accessibility
RIVKLE® – Hydraulic/pneumatic installation tools
Tooling not included(see page 58)
Stroke controlled installation equipment
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 54
55
236 156 010002200 gF = 3 500 N => 21 000 N
M14M12M10M8M6M5M4M3
� � �
� �
�
�
�
�
�
�
� � �
ø RIVKLE®
2490 gF = 3 500 N => 22 000 N
M14M12M10M8M6M5M4M3
� � �
� �
�
�
�
�
�
��
�
�
� �
ø RIVKLE®
B2007
2,12 0,07 0,30 2,49 kg
P2007
+ +
2,20 0,07 0,33 2,60 kg+ +
www.rivkle-b2007.comWEB
RIVKLE B2007
�
Steel
Aluminium
Stainless steel
Total weight
Total weight
Pneumatic
Tool + Tooling + Pneumatic
Tool + Tooling + Battery
A dedicated brochure has been created for this product, please contact Böllhoff.
Tooling not included (see page 58)
Comparable weight to the P2007 when fitted with hose
Package with 1 battery 236 166 01000Package with 2 batteries 236 167 01000
RIVKLE®B2007 - Battery tool
Steel
Aluminium
Stainless steel
Generic code for a tool with unique force cartridge: 282 520 00 005It is also possible to get mono cartridge alone. Please contact Böllhoff.
RIVKLE®P2007 - Flexible and versatile
Pressure controlled installation equipment
Tooling not included(see page 58)
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 55
56
M14M12M10M8M6M5M4M3ø RIVKLE®PN
� � � �
236 158 01000Fmax = 14 500 N 2400 g
M14M12M10M8M6M5M4M3ø RIVKLE®PN
� �
RIVKLE®P3007 PN
236 160 01000Fmax = 25 000 N 3100 g
236 159 010003400 gF = 15 000 N => 40 000 N
RIVKLE®P2007 PN
M14 M16M12M10M8M6M5M4
� � � �
� � �
� � � � �
ø RIVKLE®
Steel
Steel
Tooling not included(see page 58)
Tooling not included(see page 58)
Generic code for a tool with unique force cartridge: 282 520 00 005It is also possible to get mono cartridge alone. Please contact Böllhoff.
Steel
Aluminium
Stainless steel
Adapted for RIVKLE® HRT from M6 Tooling not included(see page 58)
RIVKLE®P3007 - Powerfull and robust construction
Pressure controlled installation equipment
RIVKLE® – Hydraulic/pneumatic installation tools
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 56
57
ø RIVKLE®
� � � �
� � � � �
� � � �
� � � �
� � � �
F = 3 000 N => 40 000 N (+/-3%)
282 522 15000 2 050 gEP 1009
282 522 16000 2 450 g
282 522 17000 3 320 g
282 522 18000 2 450 g
282 522 19000 3 320 g
EP 2009
EP 3009
EP 2009 PN
EP 3009 PN
ø RIVKLE®
M14M12M10M8M6M5M4M3
282 522 14 000
282 522 14 800
282 522 14 500
+
03 04 05 06 08 10 12 14 16282 522 14 1XX
M3 M4 M5 M6 M8 M10 M12 M14 M16
- 204 205 505 206 506 208 508 210282 522 14 XXX
- M4 M5 D5 M6 D6 M8 D8 M10
ø RIVKLE®
+
+
RIVKLE FC340
Washer + Nut
TOOLING KIT
Tooling for RIVKLE® UNC and RIVKLE® UNF available on demand. Select the kit according to the diameter you use.
RIVKLE® FC340 - FORCE CONTROLER
Available with and without certification
A dedicated brochure has been created for this product, please contact Böllhoff.
� 5 m (standard deliverd)� 10 m� 15 m
The generic code of an EP X009 configured with options is: 282 520 00001. Contact us for more information.
Acknowledgementby key
Acknowledgementby button
Acknowledgementby RFID
Stack lightrepeater
Multi-energyhose
Options
� Association of a force hydraulic/pneumatic assembly tool with a setting stroke control process� Constant warranty of perfect setting
Tooling not included (see page 58)
RIVKLE®EP X009 Process Control
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 57
69 720
69 030
74 720
74 030
78 720
*(6)
77 720
77 030
58
RIVKLE® P2005 / P1007 / P2007
03 04 05 06 08 10 *(1) – –
– 04 05 06 08 *(3) – – –
03 04 05 06 08 10 *(2) – –
– 04 05 06 08 *(4) – – –
236 113 XX 020
376 113 XX 020
M3 M4 M5 M6 M8 M10 M12 M14 M16
RIVKLE® P3007
– – – – 08 10 12 14 16
– – – – 08 10 12 14 16
236 159 XX 020
236 159 XX 030
236 113 XX 030
376 113 XX 030
65 620
03 030
67 620
67 030
68 620
68 030
69 620
69 030
74 620
74 030
236 113 XX XXX
236 113 XX XXX
ø RIVKLE®
– 04 094 05 094 06 127 08 101 *(5) – – –
– 04 086 05 095 06 128 08 087 10 010 – – –
236 913 XX XXX
236 913 XX XXX
M3 M4 M5 M6 M8 M10 M12 M14 M16
ø RIVKLE®
RIVKLE® B2007
03 04 05 06 08 236 913 08 110 236 913 10 019
– 04 05 06 08 –
03 04 05 06 08 08 10
– 04 05 06 08 –
236 113 XX 020
376 113 XX 020
M3 M4 M5 M6 M8 M8 M10
236 113 XX 030
376 113 XX 030
236 166 00 303
236 166 00 304
3 � 18 kN 18 � 22 kN
4-40 6-32 8-32 10-24 1/4-20 10-32 1/4-28 7/16-20 3/8-24
ø RIVKLE® - UNC ø RIVKLE® - UNF
*(1) = 236 153 12 020 *(2) = 236 153 12 030 *(3) = 376 913 10 020 *(4) = 376 913 10 030 *(5) = 236 913 10 006 *(6) = 236 923 78 030
RIVKLE® P2005 / P1007 / P2007
– – – – 08 101 *(5) – – –
– – – – 08 087 10 010 – – –
236 913 XX XXX
236 913 XX XXX
RIVKLE® P2007 PN
RIVKLE® P3007 PN
– – – –
– –
236 113 00 002
236 113 00 001
M3 M4 M5 M6 M8 M10 M12 M14 M16
ø RIVKLE®
– – – – –
+
+
+
Nose for studs & force >18 kN (M8 & M10)
Fork for studs & force >18 kN (M8 & M10)
RIVKLE® TOOLING BOX
Mandrel
Anvil
Mandrel
Anvil
Mandrel
Anvil
Mandrel
Anvil
Mandrel
Anvil
Mandrel
Anvil
RIVKLE® – Hydraulic/pneumatic installation tools
Tooling
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:47 Page 58
59
RIVKLE®P2005
RIVKLE®P1007
RIVKLE®
P1007 / P2007 / P2005
RIVKLE®B2007
RIVKLE®P2007
RIVKLE®P2007 PN
RIVKLE®P3007 PN
RIVKLE®P3007
236 155 00 305
236 157 00 301
236 155 01 001
236 157 01 001
236 156 01 001
–
236 159 01 001
236 156 00 301
236 159 00 3014 - 6 Kg
282 590 10 152––
2 - 3 Kg282 590 10 820
2,2 - 4 Kg282 590 10 665
2,2 - 4 Kg282 590 10 664
KIT
236 803 00 008
236 803 00 009
236 114 00 970
236 166 00 309+
282 590 30 351RIVKLE®B2007 282 590 30 354 282 590 30 356 236 166 00 308 See page 60
Battery withhigher capacity14,4V 4,0AH -Li-Ion
Multicharger4 positions
Cord powersupply
Tool support Screw kitadaptator
Ring
Pin
Accessories
Refill & purge accessory
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 59
60
P2005 P1007P2007P2007PNP3007PN
+ 100 mm
+ 50 mm
+ 150 mm
+ 50 mm
+ 100 mm
282 590 10 789
282 590 10 790
282 590 10 791
282 590 10 792
282 590 10 984
282 590 10 985
282 590 10 986
M3
236 153 00 043 236 157 00 309 236 803 00 005 236 803 00 216 236 166 00 300
236 803 03 000
M4 236 803 04 000
M5 236 803 05 000
M6 236 803 06 000
M8 236 803 08 000
P2005 P1007 P2007 PX007 + P2005 B2007
5
M3 M3 x 60236 803 03 020 236 803 03 010
43
M4 M4 x 60236 803 04 020 236 803 04 010
M5 M5 x 65236 803 05 020 236 803 05 010
M6 M6 x 65236 803 06 020 236 803 06 010
M8 M8 x 70236 803 08 020 236 803 08 010
236 803 03 040
236 803 04 040
236 803 05 040
236 803 06 040
-
2
236 113 03 030
236 113 04 030
236 113 05 030
236 113 06 030
236 113 08 030
ISO4762 DIN912
A
2
5
B C
1453
14 138
6
+ 100 mm+ 100 mm+ 50 mm+ 100 mm
+ 150 mm + 200 mm
145 + 138 + 6 1 + 2 + 3 + 4
KIT = A + B + C
B2007= original nose
RIVKLE® – Hydraulic/pneumatic installation tools
Accessories
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 60
61
A dedicated brochure has been created for those products, please contact Böllhoff.
EPK C / EPK / EPK HPHydraulic pneumatic tool with process control
SAC 310Modular setting head
HSASetting head with automatic loading system
ESAElectrical setting head
RIVKLE® – Special installation machines
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 61
62
232 40 060030232 40 080030
232 49 080502
232 90 050501
232 91 060502232 91 080504232 91 100503232 91 100501232 91 124501
233 00 030020233 00 030035233 00 040025233 00 040046233 00 050030233 00 050056233 00 060030233 00 060056233 00 080030233 00 080056233 00 100035233 00 100060
233 01 030010233 01 030015233 01 030030233 01 030045233 01 030060233 01 040010233 01 040020233 01 040040233 01 040060233 01 050030233 01 050055233 01 050080233 01 060030233 01 060055233 01 060080233 01 080030233 01 080055233 01 080080233 01 080105233 01 100035233 01 100060233 01 100085233 01 100110233 01 120040233 01 120070233 01 120100233 01 140600
233 04 040020233 04 050030233 04 060030233 04 080030
233 06 030015233 06 030025233 06 030032233 06 040042233 06 040230233 06 050045233 06 050233233 06 060045233 06 060060233 06 060233233 06 080060233 06 080233233 06 080255233 06 100015233 06 100030233 06 100045233 06 100060
233 06 120015233 06 120030233 06 120045233 06 120060
233 07 030100233 07 030175233 07 030250233 07 030325233 07 040230233 07 040325233 07 050040233 07 050230233 07 060230233 07 060255233 07 080230233 07 080255233 07 100235233 07 100450233 07 100600
233 08 040020233 08 040035233 08 050030233 08 050400233 08 060300233 08 060450233 08 080300233 08 080450233 08 100300233 08 100450233 08 100600
233 10 030035233 10 030050233 10 040036233 10 040050233 10 050040233 10 050065233 10 060046233 10 060065233 10 080046233 10 080065233 10 100046233 10 100065
233 11 030015233 11 030030233 11 030045233 11 030060233 11 040020233 11 040030233 11 040050233 11 040070233 11 050040233 11 050065233 11 050090233 11 060040233 11 060065233 11 060090233 11 080040233 11 080065233 11 080090233 11 100040233 11 100065233 11 100090233 11 120045233 11 120075233 11 120105
233 16 030020233 16 030030233 16 040020233 16 040030233 16 040040233 16 050020
233 16 050030233 16 050040233 16 060030233 16 060040233 16 060050233 16 060060233 16 080030233 16 080040233 16 080050233 16 080060233 16 100030233 16 100045233 16 100060233 16 120030233 16 120045233 16 120060
233 17 030175233 17 030250233 17 030325233 17 040175233 17 040250233 17 040325233 17 050200233 17 050300233 17 050400233 17 050500233 17 060300233 17 060450233 17 060600233 17 060750233 17 080300233 17 080450233 17 080600233 17 080750233 17 100300233 17 100450233 17 100600
233 18 040250233 18 040325233 18 050300233 18 050400233 18 060300233 18 060450233 18 060600233 18 080300233 18 080450233 18 080600233 18 100300233 18 100450233 18 100600
233 20 030020233 20 030035233 20 040030233 20 040045233 20 050031233 20 050055233 20 060031233 20 060055233 20 080031233 20 080055233 20 100060
233 21 030015233 21 030030233 21 030045233 21 040020233 21 040040233 21 040060233 21 050030233 21 050055233 21 050080233 21 060030233 21 060055
233 21 060080233 21 080030233 21 080055233 21 080080233 21 080105233 21 100035233 21 100060233 21 100085233 21 120040233 21 120070
233 24 040020233 24 050030233 24 060030233 24 080030
233 26 030015233 26 030025233 26 030032233 26 040015233 26 040030233 26 040035233 26 040042233 26 050015233 26 050030233 26 050040233 26 060015233 26 060030233 26 060045233 26 060060233 26 080015233 26 080030233 26 080045233 26 080060233 26 100015233 26 100030233 26 100045233 26 100060233 26 120015233 26 120030233 26 120045233 26 120060
233 27 040175233 27 040250233 27 040325233 27 050100233 27 050200233 27 050300233 27 050400233 27 060030233 27 060450233 27 080350233 27 080500233 27 100150233 27 100300233 27 100600
233 30 030035233 30 030050233 30 040035233 30 040050233 30 050045233 30 060045233 30 060065233 30 080045233 30 080065233 30 100045233 30 100065
233 31 030015233 31 030030233 31 030045233 31 030060233 31 040020233 31 040030
233 31 040050233 31 040070233 31 050040233 31 050065233 31 050090233 31 060040233 31 060065233 31 060090233 31 080040233 31 080065233 31 080090233 31 100040233 31 100065233 31 100090233 31 120045233 31 120075233 31 120105
233 36 030020233 36 030030233 36 040020233 36 040030233 36 040040233 36 050020233 36 050030233 36 050040233 36 060030233 36 060040233 36 060050233 36 060060233 36 080030233 36 080040233 36 080050233 36 080060233 36 100030233 36 100045233 36 100060233 36 120030233 36 120045233 36 120060
233 37 040175233 37 040250233 37 040325233 37 050200233 37 050300233 37 050400233 37 050500233 37 060300233 37 060450233 37 060600233 37 060750233 37 080300233 37 080450233 37 080600233 37 080750233 37 100300233 37 100450233 37 100600
233 41 040020233 41 050030233 41 050045233 41 060030233 41 060055233 41 080030233 41 080055233 41 100035233 41 100060233 41 120030233 41 040230233 41 050230233 41 060230233 41 080230
233 44 040020
3737
37
37
3737373737
343434343434343434343434
202020202020202020202020202020202020202020202020202020
32323232
2828282828282828282828282828282828
28282828
181818181818181818181818181818
3131313131313131313131
353535353535353535353535
2222222222222222222222222222222222222222222222
292929292929
29292929292929292929292929292929
191919191919191919191919191919191919191919
30303030303030303030303030
3434343434343434343434
2121212121212121212121
21212121212121212121
32323232
2828282828282828282828282828282828282828282828282828
1818181818181818181818181818
3535353535353535353535
232323232323
2323232323232323232323232323232323
29292929292929292929292929292929292929292929
191919191919191919191919191919191919
1616161616161616161615151515
33
333333
26262626262626262626262626
161616161616
26262626262626262626262626
39393939393948
39
474747474747
484848
53535353535353535353
5253535353
233 44 050030233 44 060030233 44 080030
233 48 030023233 48 030030233 48 040020233 48 040040233 48 050030233 48 050040233 48 060001233 48 060045233 48 080001233 48 080002233 48 100035233 48 100055233 48 120045
233 51 040020233 51 050030233 51 060030233 51 080030233 51 080055233 51 100035
233 58 030023233 58 030030233 58 040020233 58 040040233 58 050001233 58 050040233 58 060030233 58 060045233 58 080001233 58 080055233 58 100035233 58 100055233 58 120045
233 91 060968233 91 060971233 91 060969233 91 060970233 91 080848233 91 080849233 91 060936
233 94 060598
233 96 050503233 96 050504233 96 060508233 96 060509233 96 080503233 96 080504
233 97 060707233 97 060727233 97 080705
235 10 806020235 10 806030235 10 808020235 10 808030235 10 810020235 10 810030235 10 812020235 10 812030235 10 814020235 10 814030
235 11 000000235 11 005020235 11 005021235 11 005030235 11 005031
RIVKLE® – Part number index
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 62
63
5353535353535353535251515154545454
5253535353
51515153535353535353535353
5858585858585858585858585858585858585858585858585858585859
6058585954595955
59596054595659565958585858585858585858
5656585859595555
60595960606060606060606060606060606060606060606060606060
585858585858585858585858
58
4747
4343
5557575757575757575757575757575757575757575757575757
5959596060606059606060595959
2121212121
3030303030
15151515
1414141414141414141414141415
151515
33333333
242424242424
141414141414
242424
323232
272727272727272727272727272727272727272727
1717171717171717171717171717171717
33333333
235 11 006020235 11 006021235 11 006030235 11 006031235 11 008020235 11 008021235 11 008030235 11 008031235 11 067006235 11 800000235 11 900000235 11 900501235 11 900502235 11 903001235 11 904001235 11 905001235 11 906001
235 12 000000235 12 005001235 12 006001235 12 008001235 12 010001
235 30 201000235 30 201001235 30 201002235 30 205020235 30 205030235 30 206020235 30 206030235 30 208020235 30 208030235 30 210020235 30 210030235 30 212020235 30 212030
236 11 300001236 11 300002236 11 303020236 11 303030236 11 304020236 11 304030236 11 305020236 11 305030236 11 306020236 11 306030236 11 308020236 11 308030236 11 310020236 11 310030236 11 365620236 11 367030236 11 367620236 11 368030236 11 368620236 11 369030236 11 369620236 11 369720236 11 374030236 11 374620236 11 374720236 11 377030236 11 377720236 11 378720236 11 400970
236 15 300043236 15 312020236 15 312030236 15 500305236 15 501000236 15 501001236 15 600301236 15 601000
236 15 601001236 15 700301236 15 700309236 15 701000236 15 701001236 15 801000236 15 900301236 15 901000236 15 901001236 15 908020236 15 908030236 15 910020236 15 910030236 15 912020236 15 912030236 15 914020236 15 914030236 15 916020236 15 916030
236 16 001000236 16 600300236 16 600303236 16 600304236 16 600308236 16 600309236 16 601000236 16 701000
236 80 300005236 80 300008236 80 300009236 80 300216236 80 303000236 80 303010236 80 303020236 80 303030236 80 303040236 80 304000236 80 304010236 80 304020236 80 304030236 80 304040236 80 305000236 80 305010236 80 305020236 80 305030236 80 305040236 80 306000236 80 306010236 80 306020236 80 306030236 80 306040236 80 308000236 80 308010236 80 308020236 80 308030
236 91 304086236 91 304094236 91 305094236 91 305095236 91 306127236 91 306128236 91 308087236 91 308101236 91 308110236 91 310006236 91 310010236 91 310019
236 92 378030
243 00 050300243 00 060300
243 10 050300243 10 060300
282 52 000005282 52 214000282 52 214103282 52 214104282 52 214105282 52 214106282 52 214108282 52 214110282 52 214112282 52 214114282 52 214116282 52 214204282 52 214205282 52 214206282 52 214208282 52 214210282 52 214500282 52 214505282 52 214506282 52 214508282 52 214800282 52 215000282 52 216000282 52 217000282 52 218000282 52 219000
282 59 010152282 59 010664282 59 010665282 59 010789282 59 010790282 59 010791282 59 010792282 59 010820282 59 010984282 59 010985282 59 010986282 59 030351282 59 030354282 59 030356
343 01 030150343 01 040150343 01 050150343 01 060200343 01 080450
343 08 030150343 08 040200343 08 050300343 08 060300343 08 080300
343 21 040020343 21 050030343 21 060030343 21 080033
343 41 030025343 41 040030343 41 040055343 41 050030343 41 050055343 41 060030343 41 060060343 41 080030343 41 080060343 41 100035343 41 100060343 41 120040343 41 120080343 41 040230
343 41 050230343 41 060230343 41 080230
343 44 040020343 44 050030343 44 060030343 44 080030
343 48 040020343 48 040030343 48 050020343 48 060025343 48 080030343 48 100035
343 51 040020343 51 050030343 51 060030343 51 080030343 51 080060343 51 100060
343 58 040025343 58 050020343 58 060030
343 64 050030343 64 060030343 64 080030
343 66 030015343 66 030025343 66 030032343 66 040042343 66 040230343 66 050045343 66 050233343 66 060045343 66 060060343 66 060233343 66 080060343 66 080233343 66 080255343 66 100015343 66 100030343 66 100045343 66 100060343 66 120015343 66 120030343 66 120045343 66 120060
343 67 030020343 67 030030343 67 040040343 67 040230343 67 050040343 67 050230343 67 060045343 67 060060343 67 060230343 67 080045343 67 080060343 67 080230343 67 100045343 67 100060343 67 100235343 67 120045343 67 120060
343 74 040020343 74 050030343 74 060030343 74 080030
27272727272727272727272727272727272727272727272727
171717171717171717171717171717171717
2525252525252525252525252525252525252525252525252525
45454545
454545454545
45454545
5858585858585858
5858
414141414141
41
414141
343 76 030015343 76 030025343 76 030032343 76 040030343 76 040035343 76 040042343 76 050020343 76 050030343 76 050045343 76 060015343 76 060030343 76 060045343 76 060060343 76 080015343 76 080030343 76 080045343 76 080060343 76 100015343 76 100030343 76 100045343 76 100060343 76 120015343 76 120030343 76 120045343 76 120060
343 77 030015343 77 030030343 77 040030343 77 040040343 77 050025343 77 050040343 77 060031343 77 060045343 77 060060343 77 080030343 77 080045343 77 080060343 77 100030343 77 100045343 77 100060343 77 120030343 77 120045343 77 120060
343 98 030590343 98 030591343 98 030592343 98 030593343 98 040627343 98 040628343 98 040629343 98 040630343 98 050622343 98 050628343 98 050629343 98 050683343 98 060624343 98 060628343 98 060629343 98 060630343 98 060631343 98 060632343 98 080625343 98 080629343 98 100690343 98 100691343 98 100692343 98 100693343 98 120501343 98 120502
372 27 050110372 27 050115372 27 050120372 27 050125
372 27 060115372 27 060120372 27 060125372 27 080115372 27 080120372 27 080125
372 91 060502372 91 060506372 91 080502372 91 080507
376 11 304020376 11 304030376 11 305020376 11 305030376 11 306020376 11 306030376 11 308020376 11 308030
376 91 310020376 91 310030
668 30 411038668 30 511044668 30 511081668 30 611071668 30 611127668 30 811071
668 31 011071
668 70 511030668 70 611050668 70 811050
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 63
Böllhoff GroupPlease find your local contact onwww.boellhoff.com
or contact us under fasteningtechnology@boellhoff.com
Subject to technical change. Reprinting, even in extract form, only permitted with express consent.Observe protective note according to ISO 16016.
Böllhoff International with companies in:ArgentinaAustriaBrazil
CanadaChina
Czech RepublicFrance
GermanyHungary
IndiaItaly
JapanMexicoPoland
RomaniaRussiaSlovakia
South KoreaSpain
SwitzerlandThailandTurkey
United KingdomUSA
Apart from these 24 countries, Böllhoff supports its international customersin other important industrial markets in close partnership with agents and dealers.
VERSION RK ANGLAIS SEUL:Mise en page 1 12/07/16 16:48 Page 64
top related