mcs-touchscreens . mcs-touch-7 front back new for 2015 high resolution (1280 x 800) lcd display...

MCS-TOUCHSCREENSwww.mcscontrols.com

MCS-TOUCH-7MCS-TOUCH-7FRONT

BACK

NEW FOR 2015

High Resolution (1280 x 800)

LCD Display with LED Backlighting

MCS-TOUCH-15.4MCS-TOUCH-15.4FRONT

BACK

ON-SCREEN KEYPAD

MCS-CONNECT and MCS-GRAPHICS providesboth graphics and service mode

The MCS-TOUCH-7 and TOUCH-15.4 are new touchscreen interfaces designed to simplify user access with the MCS-Magnum and MCS-MicroMag utilizing MCS-Connect to provide both graphics and service mode access to technicians.

Information and graphics on the MCS-TOUCH-7 and MCS-TOUCH-15.4 are shown on a high resolution (1280x800) LCD display with LED backlighting, which will guarantee long-life operation.

The MCS-TOUCH-7 and 15.4 are suitable for installation for both indoor and outdoor applications. Utilizing a gasket for an environment seal provides the unit with a NEMA 4 rating.

MCS-TOUCHSCREEN

MOTHERBOARD - FRONT

MICRO

SD Slot

1 USB Port

On-the-Go

2 - USB

Ports 2.0Ethernet

Port

3 - RS 485

Communication Ports

+12 V DC

Power Input

1 GB DDR3

Memory

RTC

Battery

5 wire connection15.4 Touchscreen

Serial

Console

PortMCS-TOUCHSCREEN

MOTHERBOARD - BACK

4 GB EMMCFlash Memory

7in LCD connector

mPCIeExpansion slot

15.4IN LCD Connector

800 MHZ i.MX6 ARM Micro

4 wire connection7in Touchscreen

INCLUDED COMPONENTSINCLUDED COMPONENTS

12 VDC - 50W Single Output Power Supply for Touchscreen Resistant to short circuiting, overloading and over voltageOperating temperature up to 700C

Ethernet Crossover Cable5ft CAT 5e Crossover Patch CordOrange

DESKTOP WITH COMPANY DESKTOP WITH COMPANY GRAPHICGRAPHIC

SETTING UP THE NETWORKSETTING UP THE NETWORK

Click the key shown and the network manager will appear as shown in this screen shot

Click Options to set Static & Dynamic IP address

Editing Wired Connection – Editing Wired Connection – Static AddressStatic Address

Click IP4 Settings

to change Network Settings

Static IP, Netmask & Static IP, Netmask & Gateway AddressGateway Address

Enter Static IP, Netmask &

Gateway Address

Set to Manual for Static IP or Auto DHCP for Dynamic

Click to save

Click Add to add a Static IP

MCS-CONNECT SCREENMCS-CONNECT SCREEN

Click to display the MCS-CONNECT main screen

Click Setup to move to the MCS-CONNECT

setup screen

MCS-PC CONNECT Setup ScreenMCS-PC CONNECT Setup Screen

Local COM PortChoose 1 to 4

Click to save

COM PORTS:RS485 1 = 1RS485 2 = 2RS485 3 = 3

USB-RS485 = 4

OPENING THE ON-SCREEN OPENING THE ON-SCREEN TOUCH KEYBOARDTOUCH KEYBOARD

Click this key to see on-screen Keyboard

DIRECTORY FOR MCS FOLDERSDIRECTORY FOR MCS FOLDERS

Click this key to see MCS Folders

Autostart boot config file runs in background to start MCS-CONNECT

BOOT CONFIG FILE STARTING BOOT CONFIG FILE STARTING MCS CONNECTMCS CONNECT

File shows MCS-TOUCHSCREEN Boot Config file starting MCS-CONNECT

GETTING TO THE MICRO CONTROL GETTING TO THE MICRO CONTROL WEBSITE SOFTWARE PAGEWEBSITE SOFTWARE PAGE

Click this key to go to the MCS website for software updates

The MCS-TOUCH-7 and 15 makes it easy for the user to manage more complex installation diagrams, without losing the overall view of the installation, as well as ensuring that the pages can be browsed in a fast and straightforward manner.

Photos below and on the next page are actual screen shots using MCS-CONNECT and MCS-GRAPHICS.

MCS GRAPHICSMCS GRAPHICS

The MCS-TOUCH-7 and 15.4 can connect to up to 60 MCS Controllers at once and supports RS485 or Ethernet networking.

MCS-TOUCH – CONNECTION MCS-TOUCH – CONNECTION RS-485 TO ONE MCS-MAGNUMRS-485 TO ONE MCS-MAGNUM

MCS-TOUCH – CONNECTION MCS-TOUCH – CONNECTION ETHERNET TO ONE MCS-MAGNUMETHERNET TO ONE MCS-MAGNUM

MCS-TOUCH – CONNECTION MCS-TOUCH – CONNECTION ETHERNET TO MULTIPLE MCS-MAGNUMSETHERNET TO MULTIPLE MCS-MAGNUMS

For additional information please visit our website www.mcscontrols.com

Or call MCS at 239-694-0089