marlite frp - the most specified brand in the world
Post on 28-Oct-2021
3 Views
Preview:
TRANSCRIPT
Marlite FRP - The mostspecified brand in the world.
StainResistant
ImpactResistant
WaterResistant
ScratchResistant
FireRated
The Industry Standard for FRP!
What is Fiberglass Reinforced Plastic (FRP)?
Panel Information
FRP Panel Sizes
Class C Fire-rated:Standard Panel Sizes – 4’x8’
Panel Thickness – 3/32” or .090” (nominal)
FRP Ceiling PanelsFRP P100CP White
Size - 2’x4’x.090” (Class C)
2’x2’x.090” (Class C, Class A)
FRP P100CP w/Gypsum
Size - 2’x4’x23/32” (Class A).090“ FRP laminated to 5/8”fire rated Gypsum
4’x9’* (select finishes)4’x10’4’x12’ (P100 White Only)
FRP is a homogeneous mixture of fiberglass, calcium carbonate, and resin. Available in pebble textured and smooth surfaces, FRP provides great durability for high wear and even moist environments. It’s economical to install, easy to maintain and a breeze to sanitize over and over again.
(class C fire rating)
Class A Fire-rated:Standard Panel Sizes – 4’x8’
Panel Thickness – 3/32” or .090” (nominal)
4’x9’* (P100 White Only)4’x10’
(class C fire rating)
Marlite Standard FRP is GREENGUARD Children & Schools
Certi�ed for low chemical emissions
Pebbled (*available in 4’ x’9’ x3/32”)
Smooth
Finishes
P 100 WhiteClass C*Class A*
P199 Bright White*Class C*Class A
P 118 Natural AlmondClass C*Class A
P 145 SilverClass C*Class A
P 106 BeigeClass CClass A
P 140 IvoryClass C*Class A
P 807 BlackClass C
S 100 S/2/S WhiteClass C
S 100G WhiteClass C
S 118G AlmondClass C
S 870N Smooth BlackClass C
S 490N Light GreyClass C
P 440N BiscuitClass C
P 151 Light GreyClass C*Class A
P 430N Medium GreyClass C
P 470N Dark GreyClass C
SERVICEWALL
PANELS
Trim Options
LIT-FRP-202101e�ective date: 01/31/21copywrite 2021
www.marlite.com(800) 377-1221
Installation
Base Moldings & Corner Guards
Follow us on:
Anodized Aluminum Trim PVC Trim
Inside CornerA550
Outside CornerA560
DivisionA565
EdgeA570
Outside CornerM360
Inside CornerV177 135°
End CapsM625 RHM620 LH
Outside CornerV179 135°
Inside CornerM350
EdgeM370
DivisionM365
Base CoveV65 3”
PVC Base Molding4” wide x 10’ long
Outside CornerM660
Inside CornerM651
Butt Joint ConnectorIncluded with Base
Molding Strips
Stainless CornerGuard
F560SS
PVC OutsideCorner Guard
M961
Apply Marlite BrandAdhesive to the back ofpanels and apply them
to a subwall.
FRP Panels can beeasily cut with a
table saw.Adhesives(3.5 gallon cans) C-915 AdhesiveAdv Polymer AdhesiveC-551 Adhesive
Sealants(10oz. Cartridge) MS-250 ClearMS-251 WhiteColor MatchedAdhere panel to
subwall.Slide division molding
under edge of firstpanel.
Staple division moldingto subwall alongresealed edge.
Adhere second panelin place and repeat.
Installation with Seam Joint
top related